Community discussions

MUM Europe 2020

Search found 97 matches

by hi4ibb
Wed Aug 15, 2018 8:49 pm
Forum: Beginner Basics
Topic: how can i access to NSM2 devices have Vlan from computer ?
Replies: 2
Views: 373

Re: how can i access to NSM2 devices have Vlan from computer ?

is there anyone can help me pz my computer connect to switch and obtain ip : 10.0.0.200. the blue box in picture my setting in mikrotik . - all Vlans under ether3 - i created a bridge with rang 10.0.0.1/24 and made hotspot for it - i put ether3 on bridge ports - i put vlan1 with rang 100.100.101.1/2...
by hi4ibb
Sun Aug 12, 2018 9:54 pm
Forum: Beginner Basics
Topic: how can i access to NSM2 devices have Vlan from computer ?
Replies: 2
Views: 373

how can i access to NSM2 devices have Vlan from computer ?

i have searched a lot about the way that i can access my nsm2 devices from my laptop and i failed , really i feel bad .

Is there anyone can help me in this point please ?
by hi4ibb
Thu May 11, 2017 6:25 pm
Forum: Beginner Basics
Topic: log in Nanostation m2 with vlan via cable or wifi
Replies: 2
Views: 876

log in Nanostation m2 with vlan via cable or wifi

Hi all

i have this wireless network.
20170511_174944.jpg
my question is :
What is the way i should do in Nanostaion setting or in Mikrotik Router to access to Nanostation from anywhere in my network via cable or wifi?

is there anyone can help me plz ?
by hi4ibb
Tue May 09, 2017 9:48 pm
Forum: Beginner Basics
Topic: How i can login in APs that have vlan?
Replies: 4
Views: 622

Re: How i can login in APs that have vlan?

is there anyone can help me plz?
by hi4ibb
Mon May 08, 2017 7:42 pm
Forum: Beginner Basics
Topic: How i can login in APs that have vlan?
Replies: 4
Views: 622

Re: How i can login in APs that have vlan?

I have a somewhat similar situation to you, and have no problem connecting. I believe most of your problem is that your computer or phone knows absolutely nothing about VLANs, so it needs to be connected via a port that is on the correct VLAN, but is NOT a trunked port. In my case it is a managed s...
by hi4ibb
Sun May 07, 2017 7:55 pm
Forum: Beginner Basics
Topic: How i can login in APs that have vlan?
Replies: 4
Views: 622

How i can login in APs that have vlan?

hi all i have 4 Nanostaions m2 and their configuration : network IP : (10.0.1.2) (10.0.1.3) (10.0.1.4) (10.0.1.5) getway ; (10.0.0.1)(10.0.0.1)(10.0.0.1)(10.0.0.1) Vlan Lan0= (ID = 102,103,104,105) and connected to ether 3 through switch. in Mikrotik Router : under ether 3 in mikrotik there are 4 vl...
by hi4ibb
Mon Apr 10, 2017 8:50 pm
Forum: Beginner Basics
Topic: Problem with D-link DGS-1024D switch with CCR1009
Replies: 7
Views: 1325

Re: Problem with D-link DGS-1024D switch with CCR1009

i have CCR1009-7g Router and i made hotspot bridge and i connected router with d-link DGS-1008D and i connected AP in switch ports and everything is okay, and my phone connected with AP well and there is no problem , ut when i changed d-link DGS-1008D to d-link DGS-1024D and connected AP in switch ...
by hi4ibb
Mon Apr 10, 2017 5:54 pm
Forum: Beginner Basics
Topic: Problem with D-link DGS-1024D switch with CCR1009
Replies: 7
Views: 1325

Re: Problem with D-link DGS-1024D switch with CCR1009

i have CCR1009-7g Router and i made hotspot bridge and i connected router with d-link DGS-1008D and i connected AP in switch ports and everything is okay, and my phone connected with AP well and there is no problem , ut when i changed d-link DGS-1008D to d-link DGS-1024D and connected AP in switch ...
by hi4ibb
Mon Apr 10, 2017 5:51 pm
Forum: Beginner Basics
Topic: Problem with D-link DGS-1024D switch with CCR1009
Replies: 7
Views: 1325

Re: Problem with D-link DGS-1024D switch with CCR1009

i have CCR1009-7g Router and i made hotspot bridge and i connected router with d-link DGS-1008D and i connected AP in switch ports and everything is okay, and my phone connected with AP well and there is no problem , ut when i changed d-link DGS-1008D to d-link DGS-1024D and connected AP in switch ...
by hi4ibb
Sun Apr 09, 2017 11:14 pm
Forum: Beginner Basics
Topic: Problem with D-link DGS-1024D switch with CCR1009
Replies: 7
Views: 1325

Problem with D-link DGS-1024D switch with CCR1009

i have CCR1009-7g Router and i made hotspot bridge and i connected router with d-link DGS-1008D and i connected AP in switch ports and everything is okay, and my phone connected with AP well and there is no problem , ut when i changed d-link DGS-1008D to d-link DGS-1024D and connected AP in switch p...
by hi4ibb
Tue May 31, 2016 5:58 pm
Forum: Beginner Basics
Topic: how to set configuration for two RBs. one for merge and second for sharing ?
Replies: 6
Views: 723

Re: how to set configuration for two RBs. one for merge and second for sharing ?

hello
test dns in rb1100
/ip dns
set max-udp-packet-size=512 servers=8.8.8.8,8.8.4.4
not solved .. i don't know if the problem from switch or rb . but when i connect nanostaion direct to ether6 , laptop connect without problem
by hi4ibb
Sun May 29, 2016 5:54 pm
Forum: Beginner Basics
Topic: how to set configuration for two RBs. one for merge and second for sharing ?
Replies: 6
Views: 723

Re: how to set configuration for two RBs. one for merge and second for sharing ?

hello test dns in rb1100 /ip dns set max-udp-packet-size=512 servers=8.8.8.8,8.8.4.4 didn't solve the problem , i noticed that when i work with only RB2011(merge and sharing), and when i go to bridge and enable settings (use ip firewall )and (use ip firewall for vlan) , it comes the problem , and w...
by hi4ibb
Wed May 25, 2016 9:06 pm
Forum: Beginner Basics
Topic: how to set configuration for two RBs. one for merge and second for sharing ?
Replies: 6
Views: 723

Re: how to set configuration for two RBs. one for merge and second for sharing ?

hello
test dns in rb1100
/ip dns
set max-udp-packet-size=512 servers=8.8.8.8,8.8.4.4

thanks friend, i will test it
by hi4ibb
Mon May 23, 2016 8:42 pm
Forum: Beginner Basics
Topic: how to set configuration for two RBs. one for merge and second for sharing ?
Replies: 6
Views: 723

how to set configuration for two RBs. one for merge and second for sharing ?

hi all, i have two routers, RB2011 for merge 2 links dsl, and RB1100 for sharing internet , and i have problem , that laptops connect to network but there is no service( no internet) , and show this error in the browser(DNS_PROBE_NO_INTERNET"), and there is no problem with mobile but i feel sometime...
by hi4ibb
Mon May 23, 2016 8:30 pm
Forum: Beginner Basics
Topic: Different DNS Servers for Different Ports
Replies: 12
Views: 3745

Re: Different DNS Servers for Different Ports

and this is the configuration for RB2011 /interface bridge add name=bridge /interface ethernet set [ find default-name=ether6 ] speed=1Gbps set [ find default-name=ether1 ] comment=ether1 name=wan1 set [ find default-name=ether4 ] comment=ether4 name=wan2 /ip neighbor discovery set ether6 discover=n...
by hi4ibb
Mon May 23, 2016 8:23 pm
Forum: Beginner Basics
Topic: error DNS_PROBE_NO_INTERNET .
Replies: 5
Views: 681

Re: error DNS_PROBE_NO_INTERNET .

and this is the configuration for RB2011 /interface bridge add name=bridge /interface ethernet set [ find default-name=ether6 ] speed=1Gbps set [ find default-name=ether1 ] comment=ether1 name=wan1 set [ find default-name=ether4 ] comment=ether4 name=wan2 /ip neighbor discovery set ether6 discover=n...
by hi4ibb
Mon May 23, 2016 8:21 pm
Forum: Beginner Basics
Topic: error DNS_PROBE_NO_INTERNET .
Replies: 5
Views: 681

Re: error DNS_PROBE_NO_INTERNET .

this is my network
by hi4ibb
Mon May 23, 2016 7:06 pm
Forum: Beginner Basics
Topic: Different DNS Servers for Different Ports
Replies: 12
Views: 3745

Re: Different DNS Servers for Different Ports

DNS decision tree: ask the DNS server configured on the host if request fails, then use secondary server configured on the host. If request fails, then fail to resolve IP. if request succeeds, use the IP that was received in the reply. In other words, there's no "use the server in IP>DNS if the one...
by hi4ibb
Mon May 23, 2016 6:55 pm
Forum: Beginner Basics
Topic: error DNS_PROBE_NO_INTERNET .
Replies: 5
Views: 681

Re: error DNS_PROBE_NO_INTERNET .

You forgot to post your configuration.
how i can export my configuration and post it here
by hi4ibb
Mon May 23, 2016 5:56 pm
Forum: Beginner Basics
Topic: error DNS_PROBE_NO_INTERNET .
Replies: 5
Views: 681

error DNS_PROBE_NO_INTERNET .

hi all. i need quickly help please . i have two routers, RB2011 for merge 2 links dsl, and RB1100 for sharing internet , and i have problem , that laptops connect to network but there is no service( no internet) , and show this error in the browser(DNS_PROBE_NO_INTERNET"), and there is no problem wi...
by hi4ibb
Sun May 08, 2016 5:36 pm
Forum: Beginner Basics
Topic: add ip and mac of AP in IP Bindings and ARP list . Correct ?
Replies: 6
Views: 1308

Re: add ip and mac of AP in IP Bindings and ARP list . Correct ?

the first switch connect to ether6 port , and there is 5 Vlans under ether6 , for 5 APs(1 2 3 4 5) the second switch connect to ether7 port, and there is 5 Vlans under ether7 , for 6 APs( 6 7 8 9 10 11), there is one AP without vlan.(is that okay to make one without vlan or i have to put it in ethe...
by hi4ibb
Sun May 08, 2016 5:33 pm
Forum: Beginner Basics
Topic: How i can create queue tree for 2 links dsl ?
Replies: 2
Views: 520

Re: How i can create queue tree for 2 links dsl ?

is there anyone can help me ?
by hi4ibb
Sun May 08, 2016 5:33 pm
Forum: Beginner Basics
Topic: error : dhcp offering lease without success ?
Replies: 7
Views: 3333

Re: error : dhcp offering lease without success ?

is there anyone can help me ?
by hi4ibb
Fri May 06, 2016 10:34 pm
Forum: Beginner Basics
Topic: error : dhcp offering lease without success ?
Replies: 7
Views: 3333

error : dhcp offering lease without success ?

hi all, I noticed this error message in log appears recently, and accompanied by other error message : radius accounting request not sent : no response. about my network : 1- i have RB2011 , 2 links dsl(4M+4m=8M) , 11 APs 2- i have two switches the first switch connect to ether6 port , and there is ...
by hi4ibb
Fri May 06, 2016 9:41 pm
Forum: Beginner Basics
Topic: add ip and mac of AP in IP Bindings and ARP list . Correct ?
Replies: 6
Views: 1308

Re: add ip and mac of AP in IP Bindings and ARP list . Correct ?

I used to use a second IP range for APs and just created a bypass binding for the entire range e.g. 192.168.100.x/24 = APs. I'd add a bypassed binding for 192.168.100.0/24 Of course a user could probably learn of this and static-assign a 100.x address to their device, but if you also set ARP = repl...
by hi4ibb
Fri May 06, 2016 9:21 pm
Forum: Beginner Basics
Topic: How i can create queue tree for 2 links dsl ?
Replies: 2
Views: 520

How i can create queue tree for 2 links dsl ?

hi all,

i have 2 links dsl ( 4M+4M=8M), and there is no post talk about how to create queue tree for 2 links dsl, just all they talk about 1 link dsl.

is there anyone can help me in creating queue tree for 2 links dsl PLZ?
by hi4ibb
Thu Apr 28, 2016 7:10 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

how i can enable horizon feature plz ? This only works on ports of the cpu-based bridge (not hardware-switched ports). Go into bridge > ports, and edit each interface you want split horizon on, and set some value there (pretty much any number will work). e.g. horizon=1 What this does is prevent any...
by hi4ibb
Thu Apr 28, 2016 6:34 pm
Forum: Beginner Basics
Topic: add ip and mac of AP in IP Bindings and ARP list . Correct ?
Replies: 6
Views: 1308

add ip and mac of AP in IP Bindings and ARP list . Correct ?

hi all,

i add ip and mac of AP devices in IP Bindings (type bypassed) and in ARP list as static . is that correct or cause problems ?

any one can help me ?
by hi4ibb
Tue Apr 26, 2016 8:10 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

or use the bridge horizon feature...
I like this feature quite a bit myself - for a simple client isolation configuration, it's very useful.
how i can enable horizon feature plz ?
by hi4ibb
Tue Apr 26, 2016 8:09 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

or use the bridge horizon feature...

can tell me how i can enable horizon feature ?
by hi4ibb
Tue Apr 26, 2016 8:00 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

Backup your configuration before making this change (just in case): Your bridge firewall forward chain only needs this one rule: add action=drop chain=forward mac-protocol=arp This will still let the Mikrotik itself send/receive ARP requests (those are received in the input chain, and sent through ...
by hi4ibb
Sun Apr 24, 2016 3:44 am
Forum: Beginner Basics
Topic: How i can be watching AP devices in RB2011
Replies: 3
Views: 654

Re: How i can be watching AP devices in RB2011

With snmp you can do it. The OID is :
interface wireless print oid
client-count=.1.3.6.1.4.1.14988.1.1.1.3.1.6.9 
You can monitor it with cacti or dude.

thanks man, but how i can do it with snmp , and what is snmp ?, forgive me , i am not very good in Mikrotik.
by hi4ibb
Sat Apr 23, 2016 7:47 pm
Forum: Beginner Basics
Topic: How i can be watching AP devices in RB2011
Replies: 3
Views: 654

How i can be watching AP devices in RB2011

hi all,
is there any way that i can be watching the AP devices that connected to RB2011 , and know the number of clients in each AP ?
by hi4ibb
Sat Apr 23, 2016 7:42 pm
Forum: Beginner Basics
Topic: IP of APs disappear in hosts menu. is it normal or not ?
Replies: 0
Views: 327

IP of APs disappear in hosts menu. is it normal or not ?

hi all,

i don't know why sometimes ip of AP devices appear in hosts menu , and sometimes disappear , is it normal or not normal ?
by hi4ibb
Sun Apr 03, 2016 8:37 pm
Forum: Beginner Basics
Topic: Plz MikroTik , give me solution for netcut and theft of Mac address ?
Replies: 10
Views: 1991

Re: Plz MikroTik , give me solution for netcut and theft of Mac address ?

1. Set "default-forwarding=no" on your wireless interface... 2. Set arp=reply-only on the interface your customers are connecting to. 3. Set add-arp=yes for the DHCP-Server. With these three settings, your router will ignore any client who had not obtained an IP address from the DHCP server. thank ...
by hi4ibb
Sun Apr 03, 2016 8:23 pm
Forum: Wireless Networking
Topic: Should i put AP ip and mac in MiroTik ?
Replies: 4
Views: 684

Re: Should i put AP ip and mac in MiroTik ?



I Suggest you to draw your entire network diagram with some software like Visio and post it here then it would be very easy to understand your network architecture

okay , thanks man , i will draw it soon


thanks again
by hi4ibb
Sun Apr 03, 2016 8:20 pm
Forum: General
Topic: bridge filters for prevent clients from seeing ip and mac ?
Replies: 12
Views: 1627

Re: bridge filters for prevent clients from seeing ip and mac ?

Assume your hotspot gateway is 192.168.88.1 you should allow your clients to communicate with their gateway with this 2 rules : add chain=forward dst-address=192.168.88.1 src-address=192.168.88.0/24 add chain=forward dst-address=192.168.88.0/24 src-address=192.168.88.1 then drop every packets in sa...
by hi4ibb
Sat Apr 02, 2016 11:40 pm
Forum: Beginner Basics
Topic: Plz MikroTik , give me solution for netcut and theft of Mac address ?
Replies: 10
Views: 1991

Re: Plz MikroTik , give me solution for netcut and theft of Mac address ?

You should add some firewall rules ,
Besides you should not allow client to communicate with each other

how i can do that plz ?
by hi4ibb
Sat Apr 02, 2016 10:48 pm
Forum: General
Topic: bridge filters for prevent clients from seeing ip and mac ?
Replies: 12
Views: 1627

Re: bridge filters for prevent clients from seeing ip and mac ?

Hi, why don't you use IP's ?? in Bridge/Setting/enable Use IP Firewall then in IP/Firewall add a simple rule which drop packets from same subnet which client are in ! for example drop forwarding packet from 192.168.200.0/24 to 192.168.200.0/24 i thanks Shayan very much so i have to delete my filter...
by hi4ibb
Sat Apr 02, 2016 10:47 pm
Forum: General
Topic: bridge filters for prevent clients from seeing ip and mac ?
Replies: 12
Views: 1627

Re: bridge filters for prevent clients from seeing ip and mac ?

Hi, why don't you use IP's ?? in Bridge/Setting/enable Use IP Firewall then in IP/Firewall add a simple rule which drop packets from same subnet which client are in ! for example drop forwarding packet from 192.168.200.0/24 to 192.168.200.0/24 i thanks Shayan very much do you mean that rule you gav...
by hi4ibb
Sat Apr 02, 2016 10:38 pm
Forum: Wireless Networking
Topic: Should i put AP ip and mac in MiroTik ?
Replies: 4
Views: 684

Re: Should i put AP ip and mac in MiroTik ?

Hi, Sorry your question in not clear , but it seems what you need is Access-list you can easily add your clients MAC address in Access-list and also disable (uncheck) "Default Authenticate" feature on your AP after that AP just allow clients who their MAC addresses added by you in AP's Access-list ...
by hi4ibb
Sat Apr 02, 2016 9:03 pm
Forum: Wireless Networking
Topic: Should i put AP ip and mac in MiroTik ?
Replies: 4
Views: 684

Should i put AP ip and mac in MiroTik ?

hi all,

i don't know if i needed to do some settings in mikrotik for my AP, should i put AP ip and mac in arp list as static , sould i have to make their ip and mac in binding list as bypass , or no need to do that ?


is there anyone can help me plz ?
by hi4ibb
Sat Apr 02, 2016 8:57 pm
Forum: Beginner Basics
Topic: Plz MikroTik , give me solution for netcut and theft of Mac address ?
Replies: 10
Views: 1991

Re:

How is your wireless network? Open or encrypted? Who is cloning macs? You can use pppoe , this will force your users to connect with an username and a password and cloning macs will be pointless. Mikrotik has nothing to do with your problem. Sent from my Lenovo K50a40 using Tapatalk my network is p...
by hi4ibb
Sat Apr 02, 2016 8:56 pm
Forum: Beginner Basics
Topic: Plz MikroTik , give me solution for netcut and theft of Mac address ?
Replies: 10
Views: 1991

Re: Plz MikroTik , give me solution for netcut and theft of Mac address ?

Hi, would you explain more please , what exactly the theft of Mac address is ? my network is public . i mean i am sharing internet by using hotspot server, login page with username and password , that means AP is without encryption and clients have ip scan software that make scanning for my network...
by hi4ibb
Sat Apr 02, 2016 8:52 pm
Forum: General
Topic: bridge filters for prevent clients from seeing ip and mac ?
Replies: 12
Views: 1627

bridge filters for prevent clients from seeing ip and mac ?

hi all, i made hotspot server as bridge , and i created 11 vlans under ether6, and i put wlan, ether6 , and 11 vlans in bridge ports. someone give me this filter to prevent clients from seeing ip and mac of other clients in my network ,but really i suffer from connecting with my network and i don't ...
by hi4ibb
Sat Apr 02, 2016 8:34 pm
Forum: Beginner Basics
Topic: Correct settings for dhcp server and hotspot server and user profile ?
Replies: 3
Views: 858

Re: Correct settings for dhcp server and hotspot server and user profile ?

hi all, is there any one can help me in this settings and tell me if they are OK, or tell me what is the correct settings ? idle timeout keepalive timeout lease time Hello Hi4ibb, Can you tell us what wrong when your server is online ? And you select BRIDGE in INTERFACE but we can't see components ...
by hi4ibb
Sat Apr 02, 2016 1:44 am
Forum: General
Topic: Mikrotik is very bad in network Solutions. why ?
Replies: 11
Views: 3348

Re: Mikrotik is very bad in network Solutions. why ?

In your case theres nothing to prevent scanning the wireless network and unencrypted wifi isnt a good idea. Consider a 2 layer authentication, first is to use radius with WPA2 (public login), 2nd is to authenticate them further with hotspot. Apply isolation for radius so that clients cant communica...
by hi4ibb
Sat Apr 02, 2016 1:24 am
Forum: General
Topic: Mikrotik is very bad in network Solutions. why ?
Replies: 11
Views: 3348

Re: Mikrotik is very bad in network Solutions. why ?

Are the mac addresses being stolen from other clients or from your network devices like the AP or router for example? Normally using hotspot/radius can prevent it but it also requires the server to reset the session if there is a confusion if a client's mac gets stolen. Most importantly dont run yo...
by hi4ibb
Sat Apr 02, 2016 1:02 am
Forum: Beginner Basics
Topic: Plz MikroTik , give me solution for netcut and theft of Mac address ?
Replies: 10
Views: 1991

Plz MikroTik , give me solution for netcut and theft of Mac address ?

i have Rb2011 and two switches and 11 AP , wireless network, to share internet , and I suffer from the problem of theft of Mac address in networks by scan ip software which caused the separation in Access Point devices, I tried a lot search for a solution, and I can not find any solution so far, so ...
by hi4ibb
Sat Apr 02, 2016 12:44 am
Forum: General
Topic: Mikrotik is very bad in network Solutions. why ?
Replies: 11
Views: 3348

Mikrotik is very bad in network Solutions. why ?

hi all, Let's speak frankly, 6 years ago and MikroTik system did not find any solution to that problem, I saw a number of topics to speak on the same problem and MikroTik company did not provide any solution. five months ago, and I'm looking for a solution to this problem, but there is not , and I d...
by hi4ibb
Sat Apr 02, 2016 12:05 am
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

Your bridge firewall seems overly complicated for what you want to do - instead of enumerating each possible combination and blocking them all individually, you should just say "block arp" in the forward chain and have done, regardless of VLAN or in/out interface. arps to/from the router don't even...
by hi4ibb
Fri Apr 01, 2016 9:25 pm
Forum: Beginner Basics
Topic: Correct settings for dhcp server and hotspot server and user profile ?
Replies: 3
Views: 858

Correct settings for dhcp server and hotspot server and user profile ?

hi all,

is there any one can help me in this settings and tell me if they are OK, or tell me what is the correct settings ?

idle timeout
keepalive timeout
lease time
by hi4ibb
Thu Mar 31, 2016 11:14 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

when i have that problem always is a layer 2 connectivity issue between clients and dhcp server
SO WHAT IS THE SOLUTION ?
by hi4ibb
Thu Mar 31, 2016 10:56 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

and this is for settings for interface
by hi4ibb
Thu Mar 31, 2016 10:53 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

Yes i have a filter in bridge to prevent my network from software that scan mac, and there is slow in connect with my network , device taking time to obtain ip , can you help me ? This sounds more like you have a switch with spanning tree turned on, and the ports where users are connecting are doin...
by hi4ibb
Wed Mar 30, 2016 11:42 pm
Forum: Beginner Basics
Topic: DHCP offering lease [ip] for [mac] without success
Replies: 22
Views: 7433

Re: DHCP offering lease [ip] for [mac] without success

This sounds like the clients' replies are not getting to the server. Is there a firewall rule on the bridge interface which blocks traffic in the input chain, and would apply to traffic coming in from bridge-local interface? The default IP is 192.168.88.1/24 on Mikrotiks, (or it was the last time I...
by hi4ibb
Fri Mar 18, 2016 7:54 pm
Forum: Beginner Basics
Topic: Can you help me in 2 adsl links+RB2011+one switch+12 APs ?
Replies: 0
Views: 344

Can you help me in 2 adsl links+RB2011+one switch+12 APs ?

hi all

i have 2 adsl links+RB2011+one switch+12 APs, and i want to make wireless internet sharing as hotspot, but i need the completed setting in one script , is there anyone help me plz ?. i am very tired in searching really .
by hi4ibb
Fri Mar 18, 2016 5:31 pm
Forum: Beginner Basics
Topic: how i connect two switches with RB2011UAS, and what type of cable?
Replies: 2
Views: 547

Re: how i connect two switches with RB2011UAS, and what type of cable?

I don't think it matters what cable you use. Most modern routers and switches can use either.

thanks man , so just connect two ethers with two switch , no need any settings ?
by hi4ibb
Wed Mar 16, 2016 2:18 am
Forum: Beginner Basics
Topic: how i connect two switches with RB2011UAS, and what type of cable?
Replies: 2
Views: 547

how i connect two switches with RB2011UAS, and what type of cable?

Hi all, i have many AP , and make hotspot severe for sharing wireless internet , but RB is not enough to connect with AP, so i bought two switches and i want to connect with RB . how i can do that plz ? , and what kind of cable that connect between switch and router board( crossover cable or straigh...
by hi4ibb
Tue Mar 15, 2016 10:41 pm
Forum: Scripting
Topic: I need script for merge two lines dsl and setup hotspot as bridge ?
Replies: 1
Views: 634

I need script for merge two lines dsl and setup hotspot as bridge ?

hi all,

can you help me in this script plz ?
by hi4ibb
Tue Mar 01, 2016 5:52 pm
Forum: Beginner Basics
Topic: how i configure web proxy RB2011UAS with usb flash disk or sd card ?
Replies: 3
Views: 1477

Re: how i configure web proxy RB2011UAS with usb flash disk or sd card ?

Enable "Cache on disk" option under ip -- webproxy. Make sure your flash drive or sdcard is proprerly detected under files sections as /disk. thanks friend, would you mind telling me some points please? is web proxy important for my wireless internet sharing network ? when i enable web proxy, does ...
by hi4ibb
Mon Feb 29, 2016 6:14 pm
Forum: Beginner Basics
Topic: how i configure web proxy RB2011UAS with usb flash disk or sd card ?
Replies: 3
Views: 1477

how i configure web proxy RB2011UAS with usb flash disk or sd card ?

hi all,

how i configure web proxy RB2011UAS using usb flash disk or sd card ? please
by hi4ibb
Fri Feb 26, 2016 6:43 pm
Forum: Beginner Basics
Topic: which way is the best for bonding two dsl lines for wireless internet sharing?
Replies: 0
Views: 408

which way is the best for bonding two dsl lines for wireless internet sharing?

Hi all,

i found two ways for bonding two dsl lines , and i want to know the best way

Normal PCC or PCC with PPPoE ?
by hi4ibb
Thu Feb 25, 2016 5:25 pm
Forum: Beginner Basics
Topic: How to control Bandwitdh and packets on two ADSL links ?
Replies: 0
Views: 386

How to control Bandwitdh and packets on two ADSL links ?

hi all,

how i can control bandwidth and packets on two adsl links please ?

ether1= wan1
ether2=wan2
bridge= lan
by hi4ibb
Sat Feb 13, 2016 1:16 am
Forum: General
Topic: I'm tired of finding a good way to control speed&bandwidth for 8M
Replies: 0
Views: 297

I'm tired of finding a good way to control speed&bandwidth for 8M

Hi all, I don't know why there is not fixed projects for controlling bandwidth and speed, i don't know why there is not fixed sections for just projects. anyway i am really tired of finding a good way to control speed and bandwidth, i I had the speed of the line 4M, but after two weeks i raised the ...
by hi4ibb
Fri Feb 12, 2016 5:30 pm
Forum: General
Topic: There is strange ips in hosts not in my server range .
Replies: 2
Views: 337

Re: There is strange ips in hosts not in my server range .

Look and see what interface those addresses are on - I assume you're talking about the IP>ARP list. If so, and these strange hosts are on your Wan interface, then this is most likely just your neighbors and it's normal, but if you're talking about hotspot hosts, then possibly a user has connected w...
by hi4ibb
Thu Feb 11, 2016 10:46 pm
Forum: General
Topic: There is strange ips in hosts not in my server range .
Replies: 2
Views: 337

There is strange ips in hosts not in my server range .

hi all ,

i saw strange ips in hosts not in my server range.

my server range is : 192.168.88.11-192.168.88.254

strange ips : 110.xx.xx.xx

is that normal or not normal , and what is the solve ?
by hi4ibb
Wed Feb 10, 2016 11:04 pm
Forum: Beginner Basics
Topic: should i have to binding ip&mac of AP and make its ip static
Replies: 0
Views: 294

should i have to binding ip&mac of AP and make its ip static

hi all, i made hotspot server for my wireless network to share internet , i have NSM2 and i made configuration of NSM2 as ap and it is okay, and i am sharing internet . but i saw some post say about binding ip&mac of AP for security, and i don't know how to configuration NSM2 in mikrotik. should i h...
by hi4ibb
Tue Feb 09, 2016 11:02 pm
Forum: Beginner Basics
Topic: Setup Vlan birdge hotspot in RB2011UAS for two ISP
Replies: 0
Views: 265

Setup Vlan birdge hotspot in RB2011UAS for two ISP

Hi all,

How i can setup vlan bridge hotspot server in in RB2011UAS for two ISP ?


ether1=wan1 = 192.168.1.2
ether2=wan2 = 192.168.0.2

ether2=master port
ether6=master port

is there anyone can help me in this point plz ?
by hi4ibb
Tue Feb 09, 2016 6:30 pm
Forum: Beginner Basics
Topic: problem: authorization login page opening always when user connect to network
Replies: 10
Views: 823

Re: problem: authorization login page opening always when user connect to network

I'm not normally a fan of doing things with scripts, but perhaps you would be happiest if you had a script that runs at, say, 4:00am and disconnects all active sessions, and then set the timeouts to zero in the hotspot/user profiles. As for the timers you posted, the user profile values will overri...
by hi4ibb
Tue Feb 09, 2016 4:34 pm
Forum: Beginner Basics
Topic: Zero mac in ARP list ?
Replies: 1
Views: 1294

Zero mac in ARP list ?

hi

i discovered that there are ip addresses in arp list with zero mac, what means?

Hacking ?
by hi4ibb
Tue Feb 09, 2016 4:20 pm
Forum: Beginner Basics
Topic: problem: authorization login page opening always when user connect to network
Replies: 10
Views: 823

Re: problem: authorization login page opening always when user connect to network

Yes - if the host's authorization times out,then they're going to get a login screen again. If you don't have idle timeouts or at the very least, maximum session durations, then you're going to run out of host IP addresses. You could also enable MAC authentication if you want to have completely tra...
by hi4ibb
Tue Feb 09, 2016 1:32 am
Forum: Beginner Basics
Topic: Profile access for only Facebook and Whatsapp
Replies: 4
Views: 1893

Re: Profile access for only Facebook and Whatsapp

At least for Facebook, I think it is:

Read this topic: http://forum.mikrotik.com/viewtopic.php?f=13&t=104215 and drop anything that doesn't match FB
thanks man, but really it is not clear . i hope there is one can help me more
by hi4ibb
Tue Feb 09, 2016 1:19 am
Forum: Beginner Basics
Topic: problem: authorization login page opening always when user connect to network
Replies: 10
Views: 823

Re: problem: authorization login page opening always when user connect to network

enable http cookies login in the hotspot's profile.


i made that friend, but same problem.

well, i mean i want user comback to my network without login page if it is authorization.

is this problem has relation with timeout idle or keepalive timeout
by hi4ibb
Tue Feb 09, 2016 12:42 am
Forum: Beginner Basics
Topic: problem: authorization login page opening always when user connect to network
Replies: 10
Views: 823

problem: authorization login page opening always when user connect to network

hi all,
how i can make login page opening for once time, cause when user disconnect to my network and comeback it have to enter password always , and i don't want that.

anyone can help me ?
by hi4ibb
Sun Feb 07, 2016 4:48 pm
Forum: Beginner Basics
Topic: 2 lines 4 M = 8 M. how i can merge the two line RB2011 please ?
Replies: 4
Views: 839

Re: 2 lines 4 M = 8 M. how i can merge the two line RB2011 please ?

Really all you can do is load sharing/balancing. The only way to get your two links to "equal" 8Mb is to have your ISP setup some type of bonding on their side and you would set it up on your side as well.
hi man , would you mind explaining more, cause i don't know about network more, please ?
by hi4ibb
Sun Feb 07, 2016 1:45 am
Forum: Beginner Basics
Topic: 2 lines 4 M = 8 M. how i can merge the two line RB2011 please ?
Replies: 4
Views: 839

2 lines 4 M = 8 M. how i can merge the two line RB2011 please ?

hi all
i have 2 lines 4 M . how i can merge the two line in RB2011 to increase speed of my network to 8M ?
by hi4ibb
Mon Jan 25, 2016 8:44 pm
Forum: Beginner Basics
Topic: Profile access for only Facebook and Whatsapp
Replies: 4
Views: 1893

Profile access for only Facebook and Whatsapp

hi all,
is it possible to make a profile access for only facebook and whatsapp in hotspot server?
by hi4ibb
Sun Jan 24, 2016 1:07 am
Forum: Beginner Basics
Topic: 4M line dsl speed, how to control speed and bandwidth for users in my network?
Replies: 3
Views: 659

4M line dsl speed, how to control speed and bandwidth for users in my network?

hi all,

i have 4M line dsl speed for my network, and i want to control speed and bandwidth for users in my network.

i want to know the best speed equation to split the speed between users, or the best way for 4M speed .

can anyone help me plz ?
by hi4ibb
Sun Jan 24, 2016 1:01 am
Forum: Beginner Basics
Topic: making vlan hotspot without switch in RB2011UAS
Replies: 3
Views: 498

Re: making vlan hotspot without switch in RB2011UAS

/interface bridge add name=bridge.VLAN /interface ethernet set [ find default-name=ether1 ] advertise=100M-half,100M-full,1000M-half,1000M-full comment="" name=ether1-WAN set [ find default-name=ether2 ] comment="To 5.8 Backhaul" name=ether2-Master-Local set [ find default-name=ether3 ] comment=CRS...
by hi4ibb
Thu Jan 21, 2016 8:10 pm
Forum: Beginner Basics
Topic: making vlan hotspot without switch in RB2011UAS
Replies: 3
Views: 498

making vlan hotspot without switch in RB2011UAS

hi all,

can i make vlan with hotspot without using external switch ?
by hi4ibb
Wed Jan 20, 2016 5:50 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

what do you advice me ? I suggest you bridge ports ether2, ether6, and wlan1 if you want all of this to be a single network. This is because ether6 - ether10 are on a different switch chip than sfp1,ether1-ether5. thank you very much man, and if don't mind helping me in last point in this link http...
by hi4ibb
Wed Jan 20, 2016 5:24 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

i am sorry man, this is my settings, is it okay? One thing I did notice is that ether2, ether3, ether4, and ether5 are all set as bridge ports. While this will work, it won't give the wirespeed performance between devices connected to these gigabit interfaces. You should remove ether3, ether4 and e...
by hi4ibb
Wed Jan 20, 2016 5:14 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

i am sorry man, this is my settings, is it okay? One thing I did notice is that ether2, ether3, ether4, and ether5 are all set as bridge ports. While this will work, it won't give the wirespeed performance between devices connected to these gigabit interfaces. You should remove ether3, ether4 and e...
by hi4ibb
Tue Jan 19, 2016 6:47 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

i am sorry man, this is my settings, is it okay?
by hi4ibb
Tue Jan 19, 2016 6:30 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

Looks fine - the open drop-down is hiding the WDS default bridge setting - but this simply tells the router which bridge to associate WDS links to - and that should be whichever bridge holds your wireless network on it. If you have a bridge called 'wireless' for instance, and that is the bridge wit...
by hi4ibb
Tue Jan 19, 2016 6:04 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

thanks man, but i am sorry to ask you, how i can do that. i am still beginner in mikrotik To enable WDS on the 2011, In the Wireless interface configuration, your mode should be set to "ap bridge" and in the WDS tab, set WDS mode: dynamic. WDS default bridge should be whatever bridge the directly-c...
by hi4ibb
Tue Jan 19, 2016 5:48 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

Re: How i can connect wlan with NSM2 as a repeater in RB2011UAS

You should avoid repeaters if possible - anything downstream from a repeater is only going to get 50% bandwidth because the repeater must spend 1/2 its time doing tx/rx from the real AP, and then the other half is available to the devices downstream from the repeater. Furthermore, it's been a while...
by hi4ibb
Mon Jan 18, 2016 6:37 pm
Forum: The User Manager
Topic: Need login page with only one authorization field
Replies: 0
Views: 784

Need login page with only one authorization field

hi all ,

how i can make login page with only one authorization field like the picture ?
by hi4ibb
Mon Jan 18, 2016 6:15 pm
Forum: Beginner Basics
Topic: What is the Best settings for lease time,idle timeout for wireless internet sharing?
Replies: 0
Views: 431

What is the Best settings for lease time,idle timeout for wireless internet sharing?

hi all i am beginner at mikrotik and i am tired in searching for fixing problem and i want the know the best settings for lease time,idle timeout in hotspot , idle timeout in user profile and keepalive time, for wireless internet sharing. lease time : hotspot idle timeout: user profile idle timeout ...
by hi4ibb
Mon Jan 18, 2016 5:39 pm
Forum: Beginner Basics
Topic: How i can connect wlan with NSM2 as a repeater in RB2011UAS
Replies: 13
Views: 1396

How i can connect wlan with NSM2 as a repeater in RB2011UAS

hi all, i want to create hotspot server in RB2011uas , and i want to connect wlan interface in router with nanostation m2 as APR . is that good way to make NSM2 as APR and connect it with wlan interface in routerboard ? and How can i make that ? i am tired from searching and i am still beginner in m...
by hi4ibb
Mon Jan 18, 2016 4:58 pm
Forum: Beginner Basics
Topic: How i can make 6 Hotspot servers in RB2011UAS
Replies: 3
Views: 531

How i can make 6 Hotspot servers in RB2011UAS

Hi all i have RB2011UAS-2HnD and 6 Nanostations as AP, and i want to connect every AP to router with different gateway , but i want all connect with one user manager ? eth1 - 192.168.1.1/24 [WAN] eth2 - 192.168.10.1/24 [LAN 1] eth3 - 192.168.11.1/24 [LAN 2] eth4 - 192.168.12.1/24 [LAN 3] eth5 - 192....