+1manually create pools again? We need to create pools automatically with Radius for PPPoE.So PPPoE with DHCPv6 PD should work exactly the same as it did before v6.43.
Thanks ( couldn't find karma+ )Change from only-hardware-queue to some Queue type multi-queue-ethernet-default
Before upgrade to this version your sentence was correct but now it is not correct anymore .If your script has more permissions that scheduler then scheduler will not be able to execute the script.
*) ppp - added new option under "ppp aaa" - "use-circuit-id-in-nas-port-id";
In this situation there is no tcp goes through tunnel , so is it useful to enable 'clamp tcp mss' at all ?
enable clamp tcp mss if routeros => 6.28
I know it may look impossible but INVENTING a way for that situation will be also very useful .This script is not intended for PC connected to ppp, but for the RouterBoard (like CPE) remotely connected.
This configuration will be possible when port isolation is completely fixed.
We have planned to do it in one of the upcoming RouterOS versions.
/ping arp-ping=yes "192.168.88.14" interface=Office count=1
+1One last please! PLEASE open source IT or let us pay for The Dude! HELL! HIRE ME TO DEVELOP IT, I know the product the best.Dude has not been updated for years, so I can't promise anything
What's new in 6.0rc10 (2013-Feb-15 10:47):
*) hotspot, ppp - support multiple address-lists;
Same problem with RB7xx . Manual disconnect and reconnect PPPoE client solves problem for few hours .After upgrade from 5.25 to 6.0 PPPoE client disconected after 3 hours on x86. System reboot PPPoE client conect again. Back to 5.25 all is OK.
/interface wireless registration-table print stats
No, currently option 82 support is added to DHCP Relay only.Does this feature request implemented in this version ?
PPPoE option 82 or ticket number Ticket#2010062166000111
We will consider adding this feature in the future.
Very interesting . what about my old http://forum.mikrotik.com/viewtopic.php?f=2&t=42698In v6 it is possible to add custom options to DHCP client.
I need itMaybe someone else can propose a workaround
I already tested it before posting here . unfortunately no success . it has same problem(e.g. you may try having vlan interface on ether1 with mtu 1500, and use it as parent interface to eoip instead of ether1)
chupaka, any real life tests? is there any benefits with multi-queue-ethernet-default or only-hardware-queue, "none" queue?
Normis, Intel driver sometime will have support for those new queues?
Me too . Support ticket sent [Ticket#2012012366000256]Also seen the same problem here.Hi,
IPv6 works fine with reply-only on the bridge interface but now IPv4 don't work. Seems like it does not reply to ARP requests. I have not done a wireshark yet...
Are you sure ?It is not possible via RADIUS. You need to add static queue, that contains 'target-address' [your client address] and 'dst-address' [target server address].
A billion timesThis, a million times.It is still not possible to extract the full configuration of one device and import it into a new device. The built in backup system is device specific, and heavy editing of an configuration export is necessary to make it importable on another device.
We do not offer such service.
Probably we will add this function in the future.
http://forum.mikrotik.com/viewtopic.php?f=2&t=41200what problem exactly?anybody tests this problem in 5.0rc11 ?
If you talk about idling connections in active list - it has been fixed in 5.0beta2
261 (0x0105) Vendor-Specific See the reference [RFC2516]
I know it is not related but when this feature will be available for PPPoE server ?That manual applies to any custom DHCP option. Add an option, specify option number and value to be sent just like in example.