Community discussions

Search found 85 matches

  • 1
  • 2
by arturs
Thu Jun 06, 2019 2:47 pm
Forum: Beginner Basics
Topic: Block IP adress trying to access RDP
Replies: 10
Views: 556

Re: Block IP adress trying to access RDP

you can count attempts in mangle prerouting chain.
I do not think the Mangle section will be the right place for such a rule. I am suggesting to use firewall raw section with
dst-limit
parameters.
by arturs
Thu Jun 06, 2019 2:33 pm
Forum: General
Topic: Time Based firewaal rules
Replies: 12
Views: 494

Re: Time Based firewaal rules

Can you give us one particular example?
I just checked with the quick firewall and ICMP drop, everything works how it should.
by arturs
Wed Jun 05, 2019 4:01 pm
Forum: RouterBOARD hardware
Topic: CCR 1009 SFP fail
Replies: 1
Views: 170

Re: CCR 1009 SFP fail

Please provide us supout.rif file to support@mikrotik.com with particular SFP transceiver information.
by arturs
Mon Jun 03, 2019 11:01 am
Forum: General
Topic: ATAQUE Firmware 3.41
Replies: 7
Views: 389

Re: ATAQUE Firmware 3.41

Please describe your problem in English so we can help you to resolve the problem you have.
by arturs
Fri May 31, 2019 4:08 pm
Forum: Beginner Basics
Topic: Best hardware/software for home gaming router [SOLVED]
Replies: 2
Views: 281

Re: Best hardware/software for home gaming router [SOLVED]

hAP ac² will be suitable for your needs
by arturs
Tue May 21, 2019 8:34 am
Forum: General
Topic: Mikrotik offering lease continually without success
Replies: 2
Views: 194

Re: Mikrotik offering lease continually without success

Enable DHCP debugging logs which will provide you detailed information, like DHCP request, ack data:
/system logging add topics=dhcp
by arturs
Thu Mar 14, 2019 8:34 am
Forum: RouterBOARD hardware
Topic: S+RJ10 Revisions
Replies: 14
Views: 1620

Re: S+RJ10 Revisions

Is there a way to trade/flash/... the rev1 modules to rev2?
Unfortunately no, because transceiver hardware differs.
by arturs
Tue Feb 26, 2019 12:39 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 30399

Re: v6.44 [stable] is released!

2011 ok 951G ok hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term. u can get the support file from here. https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4o0tSC2d3Q6LMz8vj93Uwv_xZn...
by arturs
Fri Feb 22, 2019 3:15 pm
Forum: Announcements
Topic: v6.44rc [testing] is released!
Replies: 67
Views: 11089

Re: v6.44rc [testing] is released!

Yes, with the latest release-candidate version they should work with auto-negotiation enabled. Also, S-RJ01 are supported now.

DAC is a bit different case, but we will look into it.
by arturs
Tue Feb 19, 2019 12:03 pm
Forum: Announcements
Topic: v6.44rc [testing] is released!
Replies: 67
Views: 11089

Re: v6.44rc [testing] is released!

Using the stable releases (6.43.12 included) I can't establish a link. With 6.44 betas and rc it works, it just needs to set the interface to 1 Gbps
These fixes will be included in upcoming v6.44.
by arturs
Tue Feb 19, 2019 10:12 am
Forum: Beginner Basics
Topic: Forum have BUG 5 (five) years.
Replies: 9
Views: 800

Re: Forum have BUG 5 (five) years.

why do you blame me for not letting you know 5 years?
We do not blame you, but it is self-evident that if we do not know where is the issue, we cannot fix it. In case, we will appreciate if you will point us where is the problem with simple step by step explanation e-mail to support@mikrotik.com.
by arturs
Fri Feb 15, 2019 1:28 pm
Forum: Beginner Basics
Topic: Drop all and accept some ports
Replies: 8
Views: 454

Re: Drop all and accept some ports

Firewall works in sequential order. You have to configure rules more specifically, for example, configure accept rules for all the traffic which should work and drop everything else.
by arturs
Tue Feb 12, 2019 2:40 pm
Forum: Announcements
Topic: v6.42.12 [long-term] is released!
Replies: 27
Views: 5730

Re: v6.42.12 [long-term] is released!

Why dont u make auto reboot after firmware upgrade???? Every new update also update firmware, and u put an option to auto upgrade firmware. But why do we have to reboot manually???
Such auto-upgrade reboot you can create with very basic scripting.
by arturs
Tue Feb 05, 2019 1:18 pm
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 10347

Re: v6.43.11 [stable] is released!

Is the 5 GHz issue with RB4011 fixed ?
Please provide us step by step example how to repeat your mentioned issue with attached supout.rif file to support@mikrotik.com.
by arturs
Mon Feb 04, 2019 8:53 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 354
Views: 58204

Re: RB4011

We are trying to reproduce your mentioned 5ghz wireless issue, currently everything works for us as expected. We will appreciate information which could help us to reproduce the issue, maybe someone can provide us step by step guide how to trigger this glitch?
by arturs
Tue Jan 22, 2019 10:19 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 76920

Re: v6.44beta [testing] is released!

Version 6.44beta61 has been released. rb4011 - improved SFP+ interface linking to 1Gbps; Does this mean the S-RJ01 is now compatible with the RB4011? Yes, with the latest beta S-RJ01 also should work. We will update compatibility table when this fix will be included in the stable version.
by arturs
Thu Jan 17, 2019 10:41 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 354
Views: 58204

Re: RB4011

The problem persist with disabled auto negotiation, even between two RB4011 devices. Issue reproduced between 2x RB4011, will be fixed in upcoming beta versions. I unfortunately can't turn off autoneg on my provider's side, so I hope a software-side fix is possible. I do not want to promise it, but...
by arturs
Wed Oct 24, 2018 7:40 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 354
Views: 58204

Re: RB4011

Generic active DAC does not seem extortionate, even if it’s 4* cost passive one?
https://www.fs.com/products/48884.html

These particular cables should work fine without any errors.
by arturs
Mon Oct 08, 2018 8:47 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 354
Views: 58204

Re: RB4011

It is not related with cable length. Passie DAC will cause FCS errors and that is why they are not supported.
by arturs
Thu Oct 04, 2018 2:06 pm
Forum: General
Topic: Kid control
Replies: 7
Views: 563

Re: Kid control

time-rate-limited=0s-23h59m59s This parameter matches only Monday from 0s to 23h59m59s, you should configure it like this: time-rate-limited=4d00:00:01-4d23:59:59! But in the latest beta version we removed this parameter and created a new one for each day. How do I specify, time-rate-limited for al...
by arturs
Thu Oct 04, 2018 1:34 pm
Forum: General
Topic: Kid control
Replies: 7
Views: 563

Re: Kid control

time-rate-limited=0s-23h59m59s
This parameter matches only Monday from 0s to 23h59m59s, you should configure it like this: time-rate-limited=4d00:00:01-4d23:59:59!
But in the latest beta version we removed this parameter and created a new one for each day.
by arturs
Fri Sep 21, 2018 2:16 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 354
Views: 58204

Re: RB4011

The device support active DAC cables.
by arturs
Mon Aug 13, 2018 10:48 am
Forum: Beginner Basics
Topic: VLAN Configuration on a CRS328-24P-4S+RM
Replies: 1
Views: 757

Re: VLAN Configuration on a CRS328-24P-4S+RM

First of all update devices RouterOS and RouterBOOT to latest current versions. Configuration example you can find Here!
by arturs
Mon Aug 13, 2018 9:22 am
Forum: Beginner Basics
Topic: CLEAR SYSTEM HISTORY
Replies: 3
Views: 793

Re: CLEAR SYSTEM HISTORY

I think he talking about /system history section. You can erase it with systems reboot.
by arturs
Mon Aug 13, 2018 8:52 am
Forum: Beginner Basics
Topic: Going beyond the max-limit when bandwidth is avialable
Replies: 1
Views: 275

Re: Going beyond the max-limit when bandwidth is avialable

Take a look on parent and child queues. Also you will need limit-at, max-limit and priority parameters. For more advanced setup you have to use queue tree + mangle.
by arturs
Thu Aug 09, 2018 10:50 am
Forum: Beginner Basics
Topic: WAN port doesn't work
Replies: 14
Views: 770

Re: WAN port doesn't work

Does your device have default configuration? When you plug in ethernet cable in ether1 interface, which LEDs are on/blinking?
by arturs
Thu Aug 09, 2018 10:46 am
Forum: Beginner Basics
Topic: DHCP Pass throught
Replies: 5
Views: 539

Re: DHCP Pass throught

Does hAP ac lite have default configuration? If it is so, then ether1 have dhcp-client with masquerade rule. You can remove all the configuration and create a simple bridge with wlan1 and ethernet interfaces, then your "Devices" will see through the hAP ac and will obtain IP from "USG".
by arturs
Thu Aug 02, 2018 8:38 am
Forum: Beginner Basics
Topic: mAP2nD, setup Eth1 as DHCP server
Replies: 5
Views: 406

Re: mAP2nD, setup Eth1 as DHCP server

Connect to the device via mac-winbox, then create a bridge and put in wlan1 and ether1 interfaces. I assume gateway will be ether2?
by arturs
Wed Aug 01, 2018 2:36 pm
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 2154

Re: Set vlan interface as DHCP server [SOLVED]

Does your PC also have configured VLANs? Because now , if you configure DHCP server on the VLAN interface, then DHCP server is sending out tagged packages with tag 81.
by arturs
Wed Aug 01, 2018 2:28 pm
Forum: Beginner Basics
Topic: Help with Basic VLAN [SOLVED]
Replies: 30
Views: 2699

Re: Help with Basic VLAN [SOLVED]

VLAN configuration depends on what kind of the device do you use. You can find more setup examples here: https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Port_Based_VLAN https://wiki.mikrotik.com/wiki/Manual:Interface/VLAN#Layer2_VLAN_examples https://wiki.mikrotik.com/wiki/Manual:Switch...
by arturs
Mon Jul 30, 2018 11:04 am
Forum: Beginner Basics
Topic: buck up problem
Replies: 2
Views: 281

Re: buck up problem

Backup will not work completely, because they are different devices. For example, hAP ac has an SFP interface.

You can "/export" and "/import" configuration file. Before import, remove unnecessary configuration lines.
by arturs
Mon Jul 30, 2018 10:56 am
Forum: Beginner Basics
Topic: hAP ac lite TC
Replies: 2
Views: 254

Re: hAP ac lite TC

It is possible. You can add cellural modem.
by arturs
Fri Jul 27, 2018 3:08 pm
Forum: Beginner Basics
Topic: Messed vlans - not routing
Replies: 4
Views: 477

Re: Messed vlans - not routing

Take a look on this configuration example.
by arturs
Fri Jul 06, 2018 8:39 am
Forum: RouterBOARD hardware
Topic: DDM not showing on SFP prot
Replies: 2
Views: 441

Re: DDM not showing on SFP prot

Hello folks,

I just checked S-85DLC05D transceiver with CRS125-24G-1S and I was able to monitor DDMI all the time, either just plugged in and after device reboot. Try to update RouterOS and RouterBOOT to latest current v6.42.5. Let us know if the problem still persist.
by arturs
Fri Jun 01, 2018 3:39 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: Kid Control Bug
Replies: 11
Views: 1648

Re: Kid Control Bug

configuring for the winbox, but it is my intention that the client should configure it by custom webfig. And by webfig, there was this divergence of data. Also it would be interesting that the user group had a policy for the kid control itself and could only record this menu. You can design a custo...
by arturs
Fri Jun 01, 2018 9:37 am
Forum: RouterOS v6 RC and v7 BETA
Topic: Kid Control Bug
Replies: 11
Views: 1648

Re: Kid Control Bug

We will fix this issue.

Thank you.
by arturs
Fri Apr 20, 2018 2:50 pm
Forum: SwOS
Topic: SwitchOS CLI
Replies: 1
Views: 822

Re: SwitchOS CLI

No, SwOS uses a simple algorithm to ensure TCP/IP communication - it just replies to the same IP and MAC address packet came from.
by arturs
Tue Apr 10, 2018 9:20 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 90555

Re: v6.42rc [release candidate] is released!

hAP ac^2. When upgrading from rc52 to rc56, i get a bootloop again. Restored by netinstall.
Everything works for me without issues. Can you repeat this reboot loop after Netinstall with RouterOS and RouterBOOT
.rc56
versions?
by arturs
Fri Mar 23, 2018 11:42 am
Forum: SwOS
Topic: RB260GS does not like version 2.7
Replies: 18
Views: 4038

Re: RB260GS does not like version 2.7

I'm having the same problem. CSS106 2.4=>2.7 manual upgrade. I was able to upgrade after resetting, as mentioned above, but I reset the config using the 2.4 web interface. (switch is remote). Switch reverts to 192.168.88.1 and then upgrade works. Without a reset, I doubt Mikrotik can fix this, sinc...
by arturs
Fri Mar 16, 2018 2:57 pm
Forum: Beginner Basics
Topic: Can I upgrade from a demo license.
Replies: 2
Views: 398

Re: Can I upgrade from a demo license.

Correct, just paste code in terminal and device should get license updated.
by arturs
Tue Mar 13, 2018 12:49 pm
Forum: SwOS
Topic: RouterOS to SwOS vLAN Help
Replies: 2
Views: 539

Re: RouterOS to SwOS vLAN Help

Hi,

Check out this setup example, maybe it will help you with configuration.
by arturs
Tue Mar 13, 2018 10:59 am
Forum: Announcements
Topic: SwOS version 2.7 released!
Replies: 31
Views: 12443

Re: SwOS version 2.7 released!

I'm not sure if there were several versions I missed or if you guys just jumped pretty far, but are there any concerns in upgrading from 1.17 to 2.7 directly? I've made a jump from 4.17 to 5.20 on an RB433 and bricked it 140ft in the air. It required a bootloader update that I didn't apply as I ski...
by arturs
Fri Mar 09, 2018 12:23 pm
Forum: SwOS
Topic: Ingress Egress commands not found in CRS326
Replies: 3
Views: 507

Re: Ingress Egress commands not found in CRS326

We are working on it, unfortunately no ETA yet.
by arturs
Wed Mar 07, 2018 10:15 am
Forum: SwOS
Topic: CRS-326 with ROS 6.41 not supporting ingress/egress vlan tagging for q-in-q
Replies: 2
Views: 566

Re: CRS-326 with ROS 6.41 not supporting ingress/egress vlan tagging for q-in-q

Currently this feature is not supported with hardware offloading, we are working to implement this option, but there is no ETA yet.
by arturs
Wed Mar 07, 2018 10:10 am
Forum: SwOS
Topic: Ingress Egress commands not found in CRS326
Replies: 3
Views: 507

Re: Ingress Egress commands not found in CRS326

Q-in-Q is not available yet for CRS3xx to be hardware offloaded. We are working on adding this feature, but we don't have a ETA yet.
by arturs
Thu Mar 01, 2018 3:05 pm
Forum: SwOS
Topic: Problem testing maximum data rate on two pair (station-AP) using one PC and cloud router switch: one perturbate other
Replies: 3
Views: 620

Re: Problem testing maximum data rate on two pair (station-AP) using one PC and cloud router switch: one perturbate othe

Hi, You should test through device, not from it. For example: TestingMachine1 -> CRS226 -> WirelessAP -> TestingMachine2 Running tests from device which you are testing is not quite right. Traffic-Generator and Bandwidth-test use lot of CPU resources and then throughput results is not good, because ...
by arturs
Wed Feb 28, 2018 8:23 am
Forum: SwOS
Topic: SwOS MTU
Replies: 7
Views: 2537

Re: SwOS MTU

Are you sure this is also valid for CSS? Doesn't state so in the linked articles.
CRS326 and CSS326 are almost identical, Jumbo frame values are the same.
by arturs
Mon Feb 05, 2018 1:56 pm
Forum: SwOS
Topic: CSS326 slow SFP+ speed
Replies: 24
Views: 5658

Re: CSS326 slow SFP+ speed

Please can someone help me on how to use SwOS/CSS326 sfp as trunk. The switch is running on a v2.7
Maybe this example will help you: vlan configuration example !
by arturs
Mon Jan 22, 2018 2:26 pm
Forum: RouterBOARD hardware
Topic: Hello, I have a Mikrotik RouterBOARD groove-A52hpn, but in the box there Tell me if it's USA or International
Replies: 4
Views: 613

Re: Hello, I have a Mikrotik RouterBOARD groove-A52hpn, but in the box there Tell me if it's USA or International

- RBGroove52HPn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - RBGroove52HPn (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). If there is no -US ...
  • 1
  • 2