Its noted in the manual!CHR has FastPath ???Code: Select all*) chr - fixed FastPath support for VMXNET3 drivers;
When did this happen!
Mikrotik, which drivers does this support ?
set use-doh-server="https://[2606:4700:4700::1111]/dns-query"
No.... but is there any way to recover the password without changing it ?
:foreach i in=[/queue simple find where total-queue!="wireless-default"] do={/queue simple set $i total-queue=wireless-default}
{
:local counter
:local check
:foreach counter in=[/ppp secret find] do={
:set $check [/ppp secret get $counter value=comment];
:set $check [pick $check 0 4];
:put $check}
}
Did you try both versions? Maybe it is a hardware fault, at least for me RB4011 has no issues.i have been tried, same thing...
/system reset-configuration
/system package update check-for-updates
/system package update install
/ip firewall address-list
add address=www.aaabbb.com list=blocked
add address=www.aaa.com list=blocked
/ip firewall filter
add action=reject chain=forward dst-address-list=blocked reject-with=icmp-network-unreachable
Yes, I did the necessary corrections.Don't you mean v6.46beta9?3) Update server to the v6.45beta9;
4) Then update all the hosts to the v6.45beta9;
Try Tools > Clear CacheSame problem, after upgrade i was unable to login again on router via IP in winbox 3.19
I need a solution for that...
Please enable RADIUS debug logs and send us the supout.rif file to support@mikrotik.com:Someone has a solution for these problems?
/system logging add topics=radius
I do not think the Mangle section will be the right place for such a rule. I am suggesting to use firewall raw section withyou can count attempts in mangle prerouting chain.
dst-limit
/system logging add topics=dhcp
Unfortunately no, because transceiver hardware differs.Is there a way to trade/flash/... the rev1 modules to rev2?
These fixes will be included in upcoming v6.44.Using the stable releases (6.43.12 included) I can't establish a link. With 6.44 betas and rc it works, it just needs to set the interface to 1 Gbps
We do not blame you, but it is self-evident that if we do not know where is the issue, we cannot fix it. In case, we will appreciate if you will point us where is the problem with simple step by step explanation e-mail to support@mikrotik.com.why do you blame me for not letting you know 5 years?
Such auto-upgrade reboot you can create with very basic scripting.Why dont u make auto reboot after firmware upgrade???? Every new update also update firmware, and u put an option to auto upgrade firmware. But why do we have to reboot manually???
Please provide us step by step example how to repeat your mentioned issue with attached supout.rif file to support@mikrotik.com.Is the 5 GHz issue with RB4011 fixed ?
Generic active DAC does not seem extortionate, even if it’s 4* cost passive one?
https://www.fs.com/products/48884.html
This parameter matches only Monday from 0s to 23h59m59s, you should configure it like this: time-rate-limited=4d00:00:01-4d23:59:59!time-rate-limited=0s-23h59m59s
Routes with interface name as the value of gateway are not used for nexthop lookup!I don't think it relates to my issues though.
Everything works for me without issues. Can you repeat this reboot loop after Netinstall with RouterOS and RouterBOOThAP ac^2. When upgrading from rc52 to rc56, i get a bootloop again. Restored by netinstall.
.rc56
CRS326 and CSS326 are almost identical, Jumbo frame values are the same.Are you sure this is also valid for CSS? Doesn't state so in the linked articles.
Maybe this example will help you: vlan configuration example !Please can someone help me on how to use SwOS/CSS326 sfp as trunk. The switch is running on a v2.7
/system routerboard settings set boot-os=swos
Both features are supported on CRS317-1G-16S+ :Damn.
Haven't tried SW/OS, but does this support VLANs?
We basically are after 10Gb switch, with good VLAN support, LACP, RSTP. Nothing layer 3.