Community discussions

MUM Europe 2020

Search found 9 matches

by Trastion
Fri Feb 19, 2016 9:15 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

I seem to have everything working except for being able to connect via VPN to the mynetname.net address but searching online it looks like that is no longer available. I will look more into that later. I ended up just using the RBs in the mix like they had it setup and basically will have a backup f...
by Trastion
Fri Feb 19, 2016 5:29 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

Ok that worked. Mostly anyways. The transceivers I have are all 1.25G so switching the ports to that worked except this model of CRS the SFP+2 ports are 10G ONLY. So I assume I need new transceivers if I want to use those. Which I will need to use them to make the jump from 2nd to 3rd building. I do...
by Trastion
Thu Feb 18, 2016 6:22 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

Ok figured out that if I take out the Fiber cable and just jump from eth to eth then the DHCP and stuff works. Why won't it work through the SFP port? I have tried different transponders and cables. Do I need a straight through fiber cable? Is the problem that I am doing this in a lab without the ac...
by Trastion
Thu Feb 18, 2016 5:14 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

I tried to figure out what you said but it is not working. I reset the RB and 3 Switches to defaults. I gave the main router the IP address of 192.168.3.1 and setup the DHCP to give out 3.10-3.254. That works if I plug into the RB. I then am going from ETH2 on the RB to ETH1 on the first switch. On ...
by Trastion
Tue Feb 16, 2016 11:46 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

Great thanks for the reply. A few questions: I am fine with defaulting everything and making it as simple as possible. I thought they were using way too much equipment as it is. Do I need to do anything specific to make the connections with the fiber daisy-chaining the 3 switches? Or just connect th...
by Trastion
Tue Feb 16, 2016 10:14 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

^^^ Hmm I missed that in there. I changed it. I don't think it is being used at all anyways. I hope doing the attachments is ok as I posted that before I saw your reply. I guess it doesn't matter to me about dividing the LANs. I just didn't want it to run out of DHCP addresses if there are a lot of ...
by Trastion
Tue Feb 16, 2016 10:03 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

Ok I think I found the proper way to export the configs. I have changed the outside IP addresses but left everything else the same.

Like I said before the Router #3 does not work so I don't know if anything is right in that one. Main & router #2 are currently working.
by Trastion
Tue Feb 16, 2016 9:23 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

Re: 3 buildings 1 internet

What is the best way to post the configs for the RB's? I have the .backup files of them or do whatever to get it another way. This is for a remote cabin and supporting buildings. The internet is pretty poor, it is Wireless Internet. I doubt there will ever be more than 20 people total at the site an...
by Trastion
Tue Feb 16, 2016 7:15 pm
Forum: Beginner Basics
Topic: 3 buildings 1 internet
Replies: 16
Views: 1433

3 buildings 1 internet

I have inherited a network that someone else setup without any documentation and things are not all working properly. To make things a little harder on me the network is an hour drive away and has poor cell service and poor internet so working from there is a pain. I have a complete second set of al...