Community discussions

MikroTik App

Search found 174 matches

by notToNew
Tue Feb 09, 2021 12:51 pm
Forum: RouterOS v7 BETA
Topic: v7.1beta4 [development] is released!
Replies: 168
Views: 22203

Re: v7.1beta4 [development] is released!

after Upgrade, vrrp between 6.48.1 and 7.1b4 does not work. Both Devices are always Master. downgrading solved it.
by notToNew
Sat Feb 06, 2021 10:12 am
Forum: RouterOS v7 BETA
Topic: v7.1beta4 [development] is released!
Replies: 168
Views: 22203

Re: v7.1beta4 [development] is released!

hm, my Wireguard config stopped working after Update from beta3 to beta4.
didn't find a reason, the Log is empty.
by notToNew
Fri Jan 01, 2021 11:28 am
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 324
Views: 61836

Re: v6.48 [stable] is released!

I have two 3011 and I have none of these issue. Are your sure it is not the connected devices or cable? I use to have a flapping issue on my RB750gr3 but after I disabled EEE on the port in the Zyxel switch this issue went away. same here. IT was not mikrotik. at anotzer location I had serious elec...
by notToNew
Tue Dec 22, 2020 7:34 pm
Forum: RouterOS v7 BETA
Topic: v7.1beta3 [development] is released!
Replies: 262
Views: 42884

Re: v7.1beta3 [development] is released!

CCR-1009 (tile) went into boot loop after upgrade from 3.48beta58 to 7.1beta3. I'm not exactly sure what triggers the reset but I was just barely able to get a supout which is on its way to MT support. Unfortunately, I couldn't get it to stay up long enough to downgrade but also unfortunately, neti...
by notToNew
Fri Dec 18, 2020 4:49 am
Forum: RouterOS v7 BETA
Topic: v7.1beta3 [development] is released!
Replies: 262
Views: 42884

Re: v7.1beta3 [development] is released!

same here as reported earlier. Updates LTE6 Router to this beta, ended in a bootloop.

read somewhere that simpleque causes this. disabled alls simpleque rules and voila, bootloop is gone.
by notToNew
Mon Dec 07, 2020 1:39 pm
Forum: Announcements
Topic: v6.47.8 [stable] is released!
Replies: 56
Views: 13172

Re: v6.47.8 [stable] is released!

I did the downgrade and it worked well. But myConfiguration Was very basic!
by notToNew
Tue Nov 10, 2020 1:04 pm
Forum: Announcements
Topic: v6.46.8 [long-term] is released!
Replies: 38
Views: 13859

Re: v6.46.8 [long-term] is released!

I had the same issue with stable läßt week twice. That's why I downgrade to longterm. So im still hoping.
by notToNew
Sun Oct 25, 2020 9:59 am
Forum: Announcements
Topic: v6.47.6 [stable] is released!
Replies: 39
Views: 7925

Re: v6.47.6 [stable] is released!

Tiere is a keep-alive setting in the wireless options which seems to help reducing the power-usage.
by notToNew
Thu Oct 08, 2020 9:07 am
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 97067

Re: v7.1beta2 [development] is released!

Don't you think it is unneeded a waste of time?
No, Not at all. I am much faster in understanding his point an have no need in ycrolling up and reading the last messages to understand.
It is just efficient!
by notToNew
Thu Oct 08, 2020 8:51 am
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 97067

Re: v7.1beta2 [development] is released!

Do you think that people are unable to follow the thread?
What is the problem? It is just efficient and the forum Software shortens the text anyway. Instead of hist post, your post actually has nothing to add to the thread.
Why you think someone should read this value-less Post?
by notToNew
Wed Sep 09, 2020 12:18 pm
Forum: Announcements
Topic: v6.48beta [testing] is released!
Replies: 185
Views: 65259

Re: v6.48beta [testing] is released!

In fact this should be done for every possible item in the config. Don't know what is the exact status now, but I have seen many things go down-up when changing only a comment.
netwatch too, just changing the comment should not update the uptime
by notToNew
Wed Jul 22, 2020 3:28 am
Forum: RouterOS v7 BETA
Topic: v7.1beta1 [development] is released!
Replies: 103
Views: 43475

Re: v7.1beta1 [development] is released!

Reboot loop on RBSXTR with LTE6 modem. Reproducible, also tried netinstall. Could not generate supout, did not find an autosupout. Log told me: Device rebootet after kernel panic. Uptime 33seconds, then the device rebooted. Edit: I tried to overcome the boot loop by disabling the lte device (which w...
by notToNew
Tue Jul 21, 2020 4:01 pm
Forum: RouterOS v7 BETA
Topic: v7.1beta1 [development] is released!
Replies: 103
Views: 43475

Re: v7.1beta1 [development] is released!

Updated HAP AC lite, great wireless performance. Hope for fast progress!
by notToNew
Fri Jul 10, 2020 7:12 pm
Forum: Announcements
Topic: v6.47.1 [stable] is released!
Replies: 147
Views: 62343

Re: v6.47.1 [stable] is released!

Good that the false reporting of sector writes is finally fixed. This did reduce the resell value of the Mikrotik device you own greatly.
Really? Nobody ever asked me for this... 😂
by notToNew
Wed Apr 29, 2020 9:31 am
Forum: Announcements
Topic: v6.46.6 [stable] is released!
Replies: 68
Views: 35367

Re: v6.46.6 [stable] is released!

Upgraded a AC 2 to this Version, configured as CAP. Nothing else changed. Several Devices cannot see the WiFi ssid. Nö connection possible.
Just downgrading to LT Version helps.
by notToNew
Sun Apr 12, 2020 12:57 pm
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 30400

Re: v6.46.5 [stable] is released!

On hap ac2, all moto z phones Do Not find 5ghz WiFi at 5220 Ce/ac. Downgrading 6.46.4 Or 6.45.8 solves it . No change or other setting changed.
Devices are controlled using capsman.
by notToNew
Sat Apr 11, 2020 11:12 pm
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 30400

Re: v6.46.5 [stable] is released!

Since this Update, my LTE6 downlaodspeer dropped to avg 35MBit. i wonderes, why my performance graph stays below 40 MBit since several days. I reverted (without any change, but with firmware!) fo 6.45.8 and my speed increased directly to 70MBit. 6.46.4 was fast aswell. Edit: To add, i did not get on...
by notToNew
Sun Mar 08, 2020 4:21 pm
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 87
Views: 67375

Re: v6.45.8 [long-term] is released!

Me too. Capsman seems to make it even worse.
Hap AC (without AC2, so not arm, stays stable)
by notToNew
Fri Jan 24, 2020 3:47 pm
Forum: Announcements
Topic: v6.46.2 [stable] is released!
Replies: 121
Views: 36916

Re: v6.46.2 [stable] is released!

[
Normis,

Can you please tell us:
What is the reason for hiding the files?
Because you dont need it. You dont need access to Kernel, you dont need access to Filesystem. I hope mikrotik will never Listen to guys like you. This will Not improve the OS.
by notToNew
Fri Jan 17, 2020 7:51 pm
Forum: Announcements
Topic: v6.46.2 [stable] is released!
Replies: 121
Views: 36916

Re: v6.46.2 [stable] is released!

Ignore
by notToNew
Fri Jan 17, 2020 7:50 pm
Forum: Announcements
Topic: v6.46.2 [stable] is released!
Replies: 121
Views: 36916

Re: v6.46.2 [stable] is released!

ignore
by notToNew
Thu Jan 09, 2020 1:10 am
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 39305

Re: v6.46.1 [stable] is released!

From 6.46. x does not work on the 5 GHz network. Does not show at all
Same here with any frequency exept
5240.
by notToNew
Tue Dec 17, 2019 11:52 pm
Forum: Announcements
Topic: Newsletter 92
Replies: 39
Views: 29543

Re: Newsletter 92

But let's face it: I have excellent Signal, so i Upgrade from cat 4 to cat6. I forgot to compare the ethernet speed. Now, old and New Devices have the same Speed, as ethernet is the limiting factor.... Even LHG has only 100mbit, only the wap has GBit, but antenna is to small for my place... So, i j...
by notToNew
Tue Dec 17, 2019 11:19 pm
Forum: Announcements
Topic: Newsletter 92
Replies: 39
Views: 29543

Re: Newsletter 92

RBSXTR&R11e-LTE6, with shiny new Cat6 300Mbit download, but only 100Mbit ethernet speed? Serious?
by notToNew
Tue Dec 17, 2019 12:08 am
Forum: RouterOS v7 BETA
Topic: 7.0b4 Becoming The New 7 Release?
Replies: 18
Views: 8390

Re: 7.0b4 Becoming The New 7 Release?

Mine just do wlan, an this is more stable. My phones connect faster, and the find the AP faster.
by notToNew
Wed Dec 11, 2019 12:14 am
Forum: RouterOS v7 BETA
Topic: 7.0b4 Becoming The New 7 Release?
Replies: 18
Views: 8390

Re: 7.0b4 Becoming The New 7 Release?

Nice Version. My hac ac2 WiFi performs much better than with current stable. Hope we will See it soon....
by notToNew
Fri Nov 15, 2019 7:12 am
Forum: Announcements
Topic: v6.45.7 [stable] is released!
Replies: 104
Views: 45412

Re: v6.45.7 [stable] is released!

Since the Update from previous stable, my phones (moto Z3) cannot use 5Ghz. Im using Capsman with 7 CAP Devices (hap AC and hap ac2). 2.4 GHz works, but my phones cannot find the 5ghz ssid.
by notToNew
Thu Aug 29, 2019 2:59 pm
Forum: Announcements
Topic: v6.45.5 [stable] is released!
Replies: 54
Views: 27549

Re: v6.45.5 [stable] is released!

Sorry, but are any news on bug with "GRE marking as invalid pakets" in this release?
There is no bug. It just got fixes some Versions ago.
by notToNew
Wed Jul 03, 2019 1:43 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 133882

Re: v6.45.1 [stable] is released!

Is there any ETA for long-term release which will fix vulnerabilities?
You didnt read the thread, did you?
by notToNew
Tue May 14, 2019 11:15 am
Forum: Announcements
Topic: v6.43.15 [long-term] is released!
Replies: 17
Views: 9635

Re: v6.43.15 [long-term] is released!

Definitely a memory use bug on WAp60's
Tested on RBD52G-5HacD2HnD and some others: cannot see this on these devices.
by notToNew
Wed Mar 27, 2019 10:31 am
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 162
Views: 54072

Re: Future of LTE products, user feedback requested

When can we expect first 5G devices? In central Europe, 5G is already available!!
by notToNew
Mon Mar 04, 2019 8:05 am
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 162
Views: 54072

Re: Future of LTE products, user feedback requested

I really need Band 28.
by notToNew
Thu Feb 28, 2019 9:04 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 57503

Re: v6.44 [stable] is released!

/ interface lte firmware-upgrade lte1 upgrade=yes
.... lost connection.... reboot.... same version on modem
I have 2 carriers with 2 different SIMs. One works, one seems to block it!
by notToNew
Tue Feb 12, 2019 1:28 pm
Forum: General
Topic: Tunnel which generates least traffic when IDLE
Replies: 13
Views: 2460

Re: Tunnel which generates least traffic when IDLE

Is that 400mb / day realistic? This translate to a continuous stream of data at about 5KB / s ??? Just pinging and rekeying isn't that expensive! On my L2TP IPsec (aes256+sha256) I hace constant flow of 3 packets per second (1.5 kbps) from client (RB2011) to server (Hex S). That makes about 16 MB p...
by notToNew
Sat Feb 09, 2019 9:48 am
Forum: General
Topic: L2TP reconnection problem after Internet disruption
Replies: 9
Views: 3051

Re: L2TP reconnection problem after Internet disruption

Hm, i changed my Internet Provider and now it works.... But i don't know why
by notToNew
Thu Feb 07, 2019 1:40 pm
Forum: General
Topic: Tunnel which generates least traffic when IDLE
Replies: 13
Views: 2460

Re: Tunnel which generates least traffic when IDLE

Sorry for not answering, I was outside country. - is an small regular keep-alive packet fine it is fine, altought i get billed for it. - how often/how much is the tunnel going to be used? when someone calls that something doesn't work. About twice a month. It's an external building without any wired...
by notToNew
Mon Jan 28, 2019 2:21 pm
Forum: General
Topic: Tunnel which generates least traffic when IDLE
Replies: 13
Views: 2460

Re: Tunnel which generates least traffic when IDLE

I have to add that only one side has a fixed IP, so GRE won't work. Thank you anyway...
by notToNew
Mon Jan 28, 2019 12:14 pm
Forum: General
Topic: Tunnel which generates least traffic when IDLE
Replies: 13
Views: 2460

Tunnel which generates least traffic when IDLE

Hi, I need a tunnel from an external MT to the main router. When I configure an L2TP Tunnel, it gererates about 400MB of Traffic per Day when IDLE. Do you have any suggestion which tunneltype and/or configuration i shoud use, when "minimal idle traffic with "some" security" has p...
by notToNew
Sat Jan 12, 2019 7:26 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 117864

Re: v6.44beta [testing] is released!


When watchdog is on, it reboots.
Please work with us in this issue.
And where is the version specific part of this? As I see it it's nothing new to this beta.... So please stay in the other thread.
by notToNew
Sat Dec 01, 2018 10:59 am
Forum: General
Topic: L2TP - old tunnel is not closed
Replies: 5
Views: 5058

Re: L2TP - old tunnel is not closed

Did you find a solution?
by notToNew
Tue Nov 27, 2018 1:21 pm
Forum: General
Topic: L2TP reconnection problem after Internet disruption
Replies: 9
Views: 3051

Re: L2TP reconnection problem after Internet disruption

Still open? Having the same....
by notToNew
Wed Oct 31, 2018 7:43 am
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 32619

Re: v6.43.4 [stable] is released!

Sometimes after reboot, my Ltap Mini looses password and let me login without any.

Rebooting again often fixes the problem.
For security considerations this is extremely... Any ideas?
Have not seen this on any other MT router, and have several 100 in the field.
by notToNew
Fri Oct 19, 2018 3:47 am
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 32619

Re: v6.43.4 [stable] is released!

My RB912R-2nD-kit refuses to upgrade. After downloading and rebooting, 6.43.2 ist still my OS.
Nothing in the logs.
I'm currently not at the same location to do a netinstall...
by notToNew
Sun Oct 14, 2018 4:03 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 117864

Re: v6.44beta [testing] is released!

the recent betas [ eg 6.44beta20 ] allow for upgrade of the lte card's firmware in RBwAPR-2nD&R11e-LTE,
Is 008 still the current firmware?
by notToNew
Tue Sep 11, 2018 9:13 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 117864

Re: v6.44beta [testing] is released!

!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing"; That's good, but we need another channel named oldstable, where 6.42 should go and stay for at least several weeks...
by notToNew
Sun Sep 09, 2018 8:38 am
Forum: Announcements
Topic: WPA2 preshared key brute force attack
Replies: 35
Views: 36595

Re: WPA2 preshared key brute force attack

Of course this will be also as option on Capsman?
It already is. Just try it.
by notToNew
Thu Aug 30, 2018 10:05 am
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 42457

Re: v6.42.7 [current] is released!

Just type in again the password, don't use the saves password.
by notToNew
Fri Aug 24, 2018 8:46 am
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 42457

Re: v6.42.7 [current] is released!

In our network we have one RB 3011 that works as a Load Balance and in this routerboard we have one DHCP server on one interface and it stoped working as well after applying 6.42.7. It was installed on top of 6.40.8. Downgraded it to 6.40.8 and then updated it to 6.40.9 and everything is working fi...
by notToNew
Mon Aug 20, 2018 2:42 pm
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 42457

Re: v6.42.7 [current] is released!

*) wireless - added option to disable PMKID for WPA2;
What is the Capsman-part of this?

EDIT: Sorry, just had to relaoad the config to see it!


Joe
by notToNew
Wed Jul 25, 2018 9:17 am
Forum: Wireless Networking
Topic: Advanced Capsman-config: reduce connecting-time
Replies: 4
Views: 1149

Re: Advanced Capsman-config: reduce connecting-time

Thanks for your message. No, "reciving IP" is an state of its own.
I think this has something to do with rstp or anything like that... but changing the bridge doesn't show improvement.
by notToNew
Tue Jul 24, 2018 9:57 am
Forum: Wireless Networking
Topic: Advanced Capsman-config: reduce connecting-time
Replies: 4
Views: 1149

Advanced Capsman-config: reduce connecting-time

Hi. When connecting a wireless device to a Capsman AP, its state is first "connected, no internet" and after several seconds it switches to "connected" (with internet). Is there an advanced Config setting, how i can decrease the time from those two states? On normal APs, this is ...
by notToNew
Sun Jul 22, 2018 6:55 pm
Forum: Wireless Networking
Topic: IPTV multicast via CAPsMAN ?
Replies: 2
Views: 1455

Re: IPTV multicast via CAPsMAN ?

Did you solve it?
by notToNew
Fri Jul 20, 2018 11:43 pm
Forum: Wireless Networking
Topic: CAPSMAN based Wifi: Connected, no internet
Replies: 9
Views: 4260

Re: CAPSMAN based Wifi: Connected, no internet

Did you solve the Problem?
by notToNew
Thu Jul 05, 2018 2:03 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 152471

Re: v6.43rc [release candidate] is released!

WARNING!!! This version 6.43rc40 just bricked two RBSXTsq5HPnD units I was testing it with. Software upgrade went fine from the factory installed 6.40.4 but then the firmware upgrade bricked the units. Netinstall currently underway. Had the same with my HAP AC2. Had no time to look for a fix, did y...
by notToNew
Wed Jun 20, 2018 1:40 pm
Forum: Announcements
Topic: v6.42.4 [current]
Replies: 93
Views: 24175

Re: v6.42.4 [current]

But this is not available to scripts, no? Perhaps you should add a read-only property "pending-upgrade". A scheduled script could look like this:
Scripts can read the log! See https://wiki.mikrotik.com/wiki/Manual:S ... _log_entry
by notToNew
Wed Jun 20, 2018 9:22 am
Forum: Announcements
Topic: v6.42.4 [current]
Replies: 93
Views: 24175

Re: v6.42.4 [current]

However, after the upgrade I noticed that the two routers with DNS servers (one for internal, one for my guest network) were no longer resolving. This wasn't an issue before the upgrade. I did see them receiving UDP 53 packets. After checking IP > DNS to see if anything had obviously changed and to...
by notToNew
Thu May 17, 2018 12:06 pm
Forum: General
Topic: About Android Strongswan "Got:critical error: AUTHENICATION_FAILED"
Replies: 3
Views: 1048

Re: About Android Strongswan "Got:critical error: AUTHENICATION_FAILED"

Hey j0o3,
can you send me more details about your configuration? trying to setup strongswan with mikrotik and having son success...
I always get (no_proposal_chosen notify error)
by notToNew
Tue Apr 24, 2018 12:29 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 207465

Re: Advisory: Vulnerability exploiting the Winbox port

6.40.8 is released, just updated!
by notToNew
Thu Apr 19, 2018 8:40 pm
Forum: Wireless Networking
Topic: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi
Replies: 296
Views: 95506

Re: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi

IT's annoying to read some unconstrictive comments of some Users.
But neverthenless, Work from Mikrotik is needed here
by notToNew
Wed Feb 28, 2018 8:27 pm
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 162
Views: 54072

Re: Future of LTE products, user feedback requested

I use them in Caravans so I neet full coverage of all different Configurations, internal and external antenna, local wifi antenna around the caravan,
mobile usage while driving (so no antenna with high DB-gains....)
by notToNew
Mon Aug 28, 2017 8:56 am
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 14107

Re: v6.40.2 [current]

Mikrotik freeze on RB952Ui-5ac2nD when enabling a disabled lte1 interface using an Huawei-E3372. after a power disconnect and reconnect, lte1 works. disabling it works as well, but enabling it again always let the device freeze! As the device is enabled after the reboot, it seems so accept the "...
by notToNew
Wed May 03, 2017 9:49 am
Forum: Announcements
Topic: Statement on Vault 7 document release
Replies: 92
Views: 60301

Re: Statement on Vault 7 document release

v6.38.5 has just been released, with vulnerabilities closed. Everyone please upgrade. Will you please also release a fix for 6.36.4 as it is the only version which works with my wireless-devices? The fix for your wireless issue is fixed in 6.38.5 as well *) wireless - improved compatibility with In...
by notToNew
Thu Mar 09, 2017 4:10 pm
Forum: Announcements
Topic: Statement on Vault 7 document release
Replies: 92
Views: 60301

Re: Statement on Vault 7 document release

v6.38.5 has just been released, with vulnerabilities closed. Everyone please upgrade.
Will you please also release a fix for 6.36.4 as it is the only version which works with my wireless-devices?
by notToNew
Mon Jan 30, 2017 11:23 am
Forum: Wireless Networking
Topic: WDS dynamic mesh poor connectivity
Replies: 15
Views: 6688

Re: WDS dynamic mesh poor connectivity

I have the same setup and see the same issues!
I use different devices, all of mine have 2 wifi-interfaces (2 and 5 GHZ) and I'd like to use both frequencies for the mesh aswell.
I hope we find a good working config. I will test the hints found in this thread aswell.
by notToNew
Mon Jan 30, 2017 10:08 am
Forum: Wireless Networking
Topic: Mesh vs. normal bridge, what to use?
Replies: 4
Views: 9820

Re: Mesh vs. normal bridge, what to use?

Mesh will work fine. Although I am currently experiencing some issues with the mesh preferring WLAN even when an Ethernet link is available. See http://forum.mikrotik.com/viewtopic.php?f=7&t=117364&p=579788#p579788 Have you tried setting CTS to Self on all of the devices? Thanks for answeri...
by notToNew
Wed Jan 25, 2017 1:16 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 102856

Re: v6.39rc [release candidate] is released

im afraid that not true. arches(either that was mips, arm, ppc or x86 branch)that marked "deprecated" ans phased-out from linux toolchain(and kernel thus not be updated as much or at all)aren't supported by, regardless vendor. and few one that still backporting thing trying to keep alive(...
by notToNew
Mon Jan 23, 2017 10:37 am
Forum: Announcements
Topic: v6.37.4 [bugfix] is released!
Replies: 38
Views: 19565

Re: v6.37.4 [bugfix] is released!

notToNew - This is from 6.37 changelog:
"check-for-updates - with two or more standalone wireless packages, will result in no wireless packages installed, uninstall extra packages first;"
OK, sorry... this one i missed ...!
by notToNew
Fri Jan 20, 2017 11:19 pm
Forum: Announcements
Topic: v6.37.4 [bugfix] is released!
Replies: 38
Views: 19565

Re: v6.37.4 [bugfix] is released!

I upgraded from 6.36.4 to 6.37.4 and lost my wireless-package, Had both installes (wireless-rep active, wireless-cm2 disabled). After the automatic installation (via spackage upgrade), no wireless-package was installed. I had to coinnect to the device via cable and manually install the package. The ...
by notToNew
Wed Jan 18, 2017 6:43 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 102856

Re: v6.39rc [release candidate] is released

It is impossible to support all the legacy stuff all the time - at some time you have to move on. You might be right, but other vendors do support this devices. If they stop the support for 6.36.4 now, it will be old within a year at lest, exactly the timeframe i neew to switch to other hardware. T...
by notToNew
Wed Jan 18, 2017 6:10 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 102856

Re: v6.39rc [release candidate] is released

Hi About Intel 2200bg [..] WPA2 support workaround for this card won't be added! Last supported version for Intel 2200bg 6.36.4 A Client has >50 IP-Cams which does not work with newer ROS, so they are all stuck at 6.36.4? So why don't you decide to offer the old wireless-cm2 package for newer ROS j...
by notToNew
Wed Jan 18, 2017 11:46 am
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 102856

Re: v6.39rc [release candidate] is released

wireless still broken. my old phone Lenovo A660 can't connect to AP after 6.37 migration anymore.
Stay at 6.36.4 or disable encryption in newer releases as workaround ;-)
Not good that you stopped supporting 6.36.x and replaced it with 6.37.4!! Not at all!
by notToNew
Mon Jan 16, 2017 5:44 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 102856

Re: v6.39rc [release candidate] is released

wireless still broken. my old phone Lenovo A660 can't connect to AP after 6.37 migration anymore.
Stay at 6.36.4 or disable encryption in newer releases as workaround ;-)
by notToNew
Wed Jan 11, 2017 3:04 pm
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 47938

Re: v6.38 [current] is released!

That functionality is not available in netfilter I think, so it would have to be implemented entirely in the management layer. I know this from shorewall, It is really a nice feature and a nice addition to Mikrotik and I'd appreciate also this smaller solution. My suggestion from above is just the ...
by notToNew
Wed Jan 11, 2017 11:36 am
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 47938

Re: v6.38 [current] is released!

Well that is already available, but it appears that it allows only cyclic definitions and no date fields. That can probably be fixed rather easily. Somehow... it should be available as an own "object", just like the adress-list. If so, I can add several named "time-objects" and ...
by notToNew
Wed Jan 11, 2017 10:57 am
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 47938

Re: v6.38 [current] is released!

You could use the note feature for that. Enter reason why each rule is made. In some cases it could be nice to have a "countdown timer" with a rule like with address list members, to temporarily open some thing without risk to forget to remove it later, but I do not consider it important ...
by notToNew
Wed Jan 11, 2017 10:05 am
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 47938

Re: v6.38 [current] is released!

Adding an extra repo wouldn't effect anything, wouldn't touch the existing versions available, it only would give users an alternative to install, I.e old stable. I agree! But the quoted question was not to add an extra version, it was about to replace the current bugfix-version. I support adding a...
by notToNew
Wed Jan 11, 2017 9:31 am
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 47938

Re: v6.38 [current] is released!

No, please NOT!!! 6.36.4 is the only version which works with some older WIFI-Devices, like INTEL 2200. This version should be supported until the new wireless-package is fixed. i have the same problem with hap lite , old toshiba notebook with intel 2200bg doesn`t work if upgrade to 6.37.xx or 6.38...
by notToNew
Tue Jan 10, 2017 12:22 pm
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 47938

Re: v6.38 [current] is released!

Please can 6.37.x be made the bugfix release? There has to be a convenient way to update routers to this version that proves to be quite stable, and avoid the current problems with 6.38 without having to go back to 6.36.4 No, please NOT!!! 6.36.4 is the only version which works with some older WIFI...
by notToNew
Fri Dec 30, 2016 9:13 pm
Forum: Announcements
Topic: v6.37.3 [current] is released!
Replies: 58
Views: 25386

Re: v6.37.3 [current] is released!

Hi, I have been testing both 6.37.1 and 6.37.3 on the 2.4Ghz band. Both versions seem to have problems when legacy clients using the Intel 2200BG chipset try to connect. Linux clients (Ubuntu 16.04.1, Kernel 4.4.0-57) give the error "Association request to the driver failed", on mikrotik ...
by notToNew
Fri Dec 23, 2016 10:14 am
Forum: Wireless Networking
Topic: Mesh vs. normal bridge, what to use?
Replies: 4
Views: 9820

Mesh vs. normal bridge, what to use?

Hello all, I have 5 HAP-AC in a row, both interfaces (2,6 and 5ghz) using mesh. The first is connected with wire, the second sees only the first, the third sees mostly only the second, sometimes he can even find the first... There is no wire between 2,3,4,5! What ist the suggested configuration? I a...
by notToNew
Thu Dec 15, 2016 10:57 am
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 92116

Re: v6.38rc [release candidate] is released

Version 6.38rc49 has been released.
*) wireless - fixed upgrade from older wireless packages when AP interface had empty SSID;
How? Ist it now allowed again?
by notToNew
Thu Dec 15, 2016 10:08 am
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 92116

Re: v6.38rc [release candidate] is released

On the AP 951G-2HnD, it would report a management protection error, but after disabling management protection the connection would still brief disconnects.
I ssee the same on 6.36.4, so i wonder why 6.37.3 is working... didn' test this version.
So please report if you find a solution!
by notToNew
Mon Nov 21, 2016 9:43 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

Same problem, my old smartphone philips w732 could not connect to wifi router. On 6.36.4 works just fine. Is any fixes for this? Yes, this is the new "feature". If you use unencrypted wifi (clear the WPA-encryption), it works. (Thats why I moved to 6.36.4, and i'm happy that they support ...
by notToNew
Thu Nov 03, 2016 10:32 am
Forum: Announcements
Topic: MikroTik News November 2016 (Issue #73)
Replies: 27
Views: 14198

Re: MikroTik News November 2016 (Issue #73)

Nice upgrade!
Please also consider upgrading RB2011UiAS-2HnD-IN and maybe some other wifi-devices (hap-ac, ...)
by notToNew
Thu Oct 20, 2016 12:37 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 92116

Re: v6.38rc [release candidate] is released

Intel(R) PRO/Wireless 3945ABG -cardsa can only connect in B/G-mode.
When AP is in B/G/N-mode, no connection is possible.
by notToNew
Tue Oct 18, 2016 12:39 pm
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

Did you have an empty SSID on one of the AP interfaces? The new wifi package can't handle those. I checked it: no , all ssid's are set. But even then, i think after reverting to the SAME firmware, I think a backup should be possible to be restored. It was possible to just copy any paste most missin...
by notToNew
Tue Oct 18, 2016 9:31 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

After upgrade from 6.36.3 to 3.37.1 ui lost my WIFI-Configuration. It just created the two main wifi-interfaces and lost all virtual interfaces. I reverted back to 6.36.3, but even restoring the backup-file does not bring back my wifi-configuration. I do have a export compact , so i manually _can_ r...
by notToNew
Thu Oct 13, 2016 6:33 pm
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

Old (2.3.6) android smart cannot connect via wifi, connect\disconnect in one second.
This is a known problem with new wireless-package. only old wireless-cm2 works with some legacy-devices.
by notToNew
Wed Oct 12, 2016 6:13 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 92116

Re: v6.38rc [release candidate] is released

@ZeroByte Thanks for your suggestion. hm, I have >90 vlans and several external maintenance-contracts. so if p.ex. the external "voip"-company needs access to the server, they automatically also need internet-access and access to the svn-server (which are normally denied) to backup the con...
by notToNew
Tue Oct 11, 2016 11:01 am
Forum: General
Topic: DHCP server static lease, one IP, multiple MAC ?
Replies: 20
Views: 6887

Re: DHCP server static lease, one IP, multiple MAC ?

I have over 50 cameras, and my gateway or ntp sometimes change, so dhcp ist the preferred way ;-) Configuration-faults are marked red in winbox, so i wonder if there should be an option to highlight "unsecure" configuration as blue, or any other color. But i know, this isn't easy aswell. I...
by notToNew
Tue Oct 11, 2016 10:43 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

However, I managed to downgrade to 6.36.4 ...
Does this version exist? I know 6.36.3. I would be interested in this aswell, as i cann't upgrade to 6.37 because of wireless-issues.
by notToNew
Tue Oct 11, 2016 10:35 am
Forum: General
Topic: DHCP server static lease, one IP, multiple MAC ?
Replies: 20
Views: 6887

Re: DHCP server static lease, one IP, multiple MAC ?

long time ago this was made thas way. It is not something that can be changed easily. I understand this, but please also understand that unneeded limitations sometimes result in extra work for your support (for explaining the limitation) and for your customers (for creating a workaround). As a work...
by notToNew
Mon Oct 10, 2016 2:51 pm
Forum: General
Topic: DHCP server static lease, one IP, multiple MAC ?
Replies: 20
Views: 6887

Re: DHCP server static lease, one IP, multiple MAC ?

it is not allowed because technically, you will have address conflict enforced by the DHCP-server. And if you suddenly have some switch with longer cache times you will have problems. Is this a MIKROTIK rule as i cannot find this in the RFC? I have multiple other Routers and only really cheap route...
by notToNew
Fri Oct 07, 2016 7:44 pm
Forum: General
Topic: DHCP server static lease, one IP, multiple MAC ?
Replies: 20
Views: 6887

Re: DHCP server static lease, one IP, multiple MAC ?

Sorry, of course i was wrong! They do have DIFFERENT MAC-adresses, but there is always only one of them connected. wired or wireless. so i'd need a feature to add static leases with different-macs and same ip! most other dhcp-server allow this, so i don't understand why they implemented this limitat...
by notToNew
Fri Oct 07, 2016 6:51 pm
Forum: General
Topic: DHCP server static lease, one IP, multiple MAC ?
Replies: 20
Views: 6887

Re:

this is not possible to add 2 different mac addresses to one ip address in RouterOS That's quiet sad. I have lots of IP_Cams. When connected by wire, they automatically disable wifi. wired and wireless have the same mac, and i need them to have the same IP and i don't care if they are connected by ...
by notToNew
Fri Oct 07, 2016 5:47 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 92116

Re: v6.38rc [release candidate] is released

Feature-request: Just like the new Interface-List, i'd need a Time-object with date/time. Having this i can set the time-object to tomorrow 06:00 and all FW-rules which are conigured with this object are "enabled" until the time runs off. I have a big firewall and so i need to enable quiet...
by notToNew
Fri Oct 07, 2016 4:52 pm
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

notToNew:
Winbox SETTINGS / INLINE COMMENTS (above Safe Mode on your screen)
As i mentioned, I have this checked(activated) but still cannot see the comments in this window, other windows show the comments just as expected!
by notToNew
Fri Oct 07, 2016 1:41 pm
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

notToNew - In Winbox go to Settings/Inline Comments This is my default setting, and ich rechecked it, but i still cannot see this comment. Scee screenshot below. The comment collumn is present in most other windows, but missing in this one. https://s16.postimg.org/4c0jczjo5/07_10_2016_12_32_50.jpg
by notToNew
Fri Oct 07, 2016 9:48 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

I see an comment-button in wireless/Access-Lists, but cannot add an comment-collumn in Winbox.
Hope, posting it here is ok as i don't know if it is an winbox or an ROS-error.
by notToNew
Wed Oct 05, 2016 9:26 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 46673

Re: v6.37.1 [current] is released!

Device: hAp lite Problem with old legacy wireless devices (for example Intel(R) PRO/Wireless 2200BG) still persist in 6.37.1 and 6.38rc7 ... can`t connect to network with WPA or WPA2 encryption. without - all fine. Always getting "extensive data loss". After downgrading to 6.34.6 - all fi...
by notToNew
Tue Oct 04, 2016 5:50 pm
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 12814

Re: Winbox 3.6 released!

That's true! I have problems even on ThinkPad x220 with 1366x768 screen.
Yeap. Same here.
Same here. Had to attach an bigger external monitor
by notToNew
Fri Sep 30, 2016 3:57 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

disconnected, extensive data loss This means your signal is bad. Maybe the upgrade forced the DFS and your device is now using a different frequency? ... you can have access to a device in a lab-enviroment, as the current production-system stays on 6.36.3 with wireless-cm2. maybe you have better de...
by notToNew
Fri Sep 30, 2016 3:53 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

disconnected, extensive data loss This means your signal is bad. Maybe the upgrade forced the DFS and your device is now using a different frequency? Don't think so. Frequency-mode is superchannel, country=no_country_set. I had the same problem with 6.36.3 and wireless-rep package with old DFS-beha...
by notToNew
Fri Sep 30, 2016 1:49 pm
Forum: Announcements
Topic: Winbox 3.6 released!
Replies: 25
Views: 12814

Re: Winbox 3.6 released!

removed. wrong
by notToNew
Fri Sep 30, 2016 11:57 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

We just released 6.38rc. Please test if wireless package issues are gone: http://forum.mikrotik.com/viewtopic.php?f=21&p=560196#p560196 No Progress with 6.38rc7 ant Intel Pro 2200BG... 10:54:46 wireless,debug wlan1: 00:12:F0:6E:XX:XX attempts to associate 10:54:46 wireless,debug wlan1: 00:12:F0...
by notToNew
Fri Sep 30, 2016 9:35 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

who are having issues with legacy client on new wireless packages For test purposes please disable any wireless security profiles, and see if it improves situation. At another office i have several (>40) IP-Surveillance-Cams, most are not compatible with the new wireless-package (I did not test all...
by notToNew
Tue Sep 27, 2016 1:09 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

who are having issues with legacy client on new wireless packages For test purposes please disable any wireless security profiles, and see if it improves situation. My Samsung-TV also works with disabled security. Please tell me if you need any further information, for now i'm reverting to 6.36.3 w...
by notToNew
Mon Sep 26, 2016 3:56 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

Just to note: Updated with the internal upgrade-tool a little test-device, a hAp ac Lite with active 6.36.3 and wireless-rep. wireless-cm2 was installed but disabled. After upgrade to 6.37, i lost all wireless-packages and the wireless-config. I had to manually install again the wireless-package and...
by notToNew
Mon Sep 26, 2016 3:34 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

who are having issues with legacy client on new wireless packages For test purposes please disable any wireless security profiles, and see if it improves situation. This seems to work, i got an IP-Adress from DHCP and can ping the router. Edit1: Also tried WPA-PSK without success. only mode=none wo...
by notToNew
Mon Sep 26, 2016 2:33 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

Try to enable tkip for group cipher. No difference. Here is the Debuglog from 3.26.3 with enables TKIP 02:02:31 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 02:02:31 wireless,debug wlan1: reject 00:12:F0:6E:DD:XX, banned (last failure - extensive data loss) 02:02:34 wireless,debug ...
by notToNew
Mon Sep 26, 2016 1:26 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

Since you changed wireless packages during the upgrade, make sure your security settings are the same. it looks like your TV saved the old AP information and password, and the new AP has some other settings, so the TV can't connect. Either fix the settings, or "forget" the network in your...
by notToNew
Mon Sep 26, 2016 12:07 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

It could depend on some settings, e.g. aes/tkip for group ciphers. Thanks for answering. I posted a more in-dept message in the new 6.37 thread and think we should continoue there...? My settings are the same on every MT-AP-device: WPA2-PSK and aes-ccm, no tkip. I have different OS'ses on the clien...
by notToNew
Mon Sep 26, 2016 11:59 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 48446

Re: v6.37 [current] is released!

Old Intel 2200BG Wirelesscards, and a 2 year old "Samsung UE22H5670"-TV does not get an IP-address when connecting wireless to an MT-Router with wunning wireless-rep(old) or new wireless-package. The error-message is below. I tested it with 3.35, 3.36.3 and 3.37. Changing to 3.36.3 and wir...
by notToNew
Mon Sep 26, 2016 10:48 am
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

2 year old sony-tv does not work with wireless-rep package. wireless-cm2 works as expected. thanks BartoszP for answering, i know that 6.37 only has one wireless-package. Anyway, the problem still exists: Connecting with 3.36.3 and wireless-cm2 works, 3.36.3 wireless-rep and 3.37.42 wireless does n...
by notToNew
Thu Sep 22, 2016 4:26 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

2 year old sony-tv does not work with wireless-rep package. wireless-cm2 works as expected.
by notToNew
Thu Sep 22, 2016 1:18 pm
Forum: Scripting
Topic: Script for Automatically setting WIFI AP power
Replies: 1
Views: 2189

Re: Script for Automatically setting WIFI AP power

Thanks for sharing, u use it a bit modified!!!
by notToNew
Thu Sep 22, 2016 9:56 am
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

You say: "My Ap has several hidden wifi with the same mac" - do you mean you have multiple Virtual AP's with the same mac address beside the one physical AP? Qiet72 No, I have ONE AP(not mikrotik) with several hidden SSIDs. each of this ssids have a name, like private-net and guestnet. Ev...
by notToNew
Wed Sep 21, 2016 6:05 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point. Qiet72 Thanks for your answer, I tried it without success. My Ap has several hidden wifi with the same mac, so how can the microtik connect...
by notToNew
Wed Sep 21, 2016 9:32 am
Forum: Wireless Networking
Topic: [SOLVED] Autologin for Wifi Hotspot?
Replies: 7
Views: 12010

Re: [SOLVED] Autologin for Wifi Hotspot?

I'd really need such s script for the microtik router itself....
by notToNew
Mon Sep 19, 2016 11:54 am
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

Is it possible to use the wireless-connect-list to connect to HIDDEN ssid's? Am I blind, or is there no possibility?
by notToNew
Wed Sep 07, 2016 6:32 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

Another finding: It is somehow unclear if you set the master-wifi-device to bridge and the virtual-device to bridge-ap, the limitation of the master-device to allow only 1 connected device wins. Changing the master-device to bridge-ap solved my problem. So please add in the documentation (or fix tha...
by notToNew
Wed Sep 07, 2016 3:57 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

Feature request for wireless-package: As we have the mode "aligment only", I'd like to have a mode "Virtual only". I often use the new combination of the wireless-rep package and configure one device as a station, and a virtual-device as a bridge-ap. Now, wenn the station doesn't...
by notToNew
Tue Sep 06, 2016 11:54 am
Forum: Wireless Networking
Topic: MESH problem: disconnected, no beacons received
Replies: 1
Views: 1447

Re: MESH problem: disconnected, no beacons received

Did you solve this problem? How?
by notToNew
Thu Sep 01, 2016 4:31 pm
Forum: Announcements
Topic: Winbox 3.5 released!
Replies: 20
Views: 13094

Re: Winbox 3.5 released!

You can move session folder, and also database folder to some custom location and then sync it whitout problem
How??
by notToNew
Thu Sep 01, 2016 10:11 am
Forum: Announcements
Topic: Winbox 3.5 released!
Replies: 20
Views: 13094

Re: Winbox 3.5 released!

please make windows winbox version working folder to be the same where winbox.exe exists. why we have to mess with "user\appdata\roaming" folder?
+1. This would allow me to sync it to several desktops
by notToNew
Thu Sep 01, 2016 9:23 am
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 25111

Re: Winbox3.4 released!

Did you forget the release-notes for Winbox 3.5, which is online since at least yesterday?
by notToNew
Mon Aug 29, 2016 3:04 pm
Forum: Announcements
Topic: v6.36.2 [current] is released!
Replies: 54
Views: 19611

Re: v6.36.2 [current] is released!

benesm1 - Winbox disconnects will be fixed in upcoming Winbox versions.
Hm, that's quiet annoying. It was stable before... Is there any workaround?
by notToNew
Mon Aug 08, 2016 4:55 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

And just because of this you think you can not run your devices?
You can check in the script itself to see it the domain is already in the list....
by notToNew
Fri Aug 05, 2016 9:44 am
Forum: General
Topic: is it possible to limit Web-Proxy to a certain interface?
Replies: 0
Views: 471

is it possible to limit Web-Proxy to a certain interface?

I have several Internet-Providers and i want to be shure that Web-Proxy only uses one of them, while the others are for backup, sip or other traffic.
Maybe there is a simple way to do this?!?
I tried routing-marks, but had no sucess..
by notToNew
Wed Aug 03, 2016 9:37 am
Forum: Announcements
Topic: MikroTik smartphone app (ex Tik-App)
Replies: 448
Views: 186486

Re: Tik App, MikroTik android utility ALPHA test

Login in v34 under 6.36 overVPN finally works. Thank you.
by notToNew
Fri Jul 29, 2016 5:11 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 53689

Re: v6.36 [current] is released!

Where to download 6.35.6 ? I'm pretty shure 6.35.4 was the lastes in '35 Builds. Here is a link, just change the hardware if needed. here the link for 6.35.4 http://download2.mikrotik.com/routeros/6.35.4/all_packages-mipsbe-6.35.4.zip 6.34.6 would be http://download2.mikrotik.com/routeros/6.34.6/al...
by notToNew
Thu Jul 28, 2016 1:00 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

Hello,
I've some features requests  (don't know if this is the right place to post them):
Hi, I think, this ist the better place for dude-postings: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424
by notToNew
Tue Jul 26, 2016 5:35 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

I have a feature-request: Let a Firewall-Rule directly run a Script. (action=run-script) Currently i have 2 choices: 1. Add an ip to a list and scan the lists for an added IP with an scheduled-script 2. parse the LOG I do need it for example for automatically sending WOL-packets when acessing the na...
by notToNew
Tue Jul 26, 2016 12:01 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 73848

Re: v6.37rc [release candidate] is released, only one wireless package!

After upgrade to 6.35.4 to 6.37rc5, I experienced unreliable Wireless with the new wireless-packet with my samsung galaxy k-zoom cellphone (about s4 hardware). I got disconnected 3 times in 30 minutes, seeing "packet flood"-errormessages in the log. The Sony-phone from my wife worked witho...
by notToNew
Fri Jul 22, 2016 10:38 am
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 53689

Re: v6.36 [current] is released!

Wer can I read what "Insert Queue before" does in Winbox in DHCP-Server/Leases?
I cann't find it in
http://wiki.mikrotik.com/wiki/Manual:IP ... ver#Leases
and I cann't even find it in terminal.
Excuse me if I'm just blind...
by notToNew
Thu Jul 21, 2016 7:50 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 53689

Re: v6.36 [current] is released!

Regarding my upgrade-issue (6.36rc40 to 6.36): A startupscript generating backupfiles local AND on a USB-Stick did not run anymore. Netinstall with downgrade worked, but I lost 2 DHCP-Static lease-entries and 1 address-list entry using the new dns-feature. Strange. The device was in a bootloop. Is i...
by notToNew
Thu Jul 21, 2016 5:15 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 53689

Re: v6.36 [current] is released!

can anyone tell me that how to use RAW tab in firewall.
See the new http://wiki.mikrotik.com/wiki/Manual:Packet_Flow_v6.
RAW is before Connection-Tracking, and so it allows to bypass it for max-performance.
by notToNew
Thu Jul 21, 2016 3:21 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 53689

Re: v6.36 [current] is released!

Upgraded my little test-enviroment(HAP-AC lite) from 6.36rc40 to 6.36, but device does not go online. As it has no COM-Port, I have no idea what's going on. 6.36rc40 rebootet without problems. Maybe some firewall rules regarding the new lists got mixed up again?!? Edit: If I get no other advice, I w...
by notToNew
Wed Jul 20, 2016 9:23 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: The Dude, v6.36rc test builds.

After the update:  add action=accept chain=input in-interface-list="" log-prefix=""
Same here... router was not accessible after upgrade because of this. I had to write a script to manually add all interface-lists from a rc38 backup-file again.
by notToNew
Tue Jul 12, 2016 10:56 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Upgrade to rc39 changed all my FILTER-Firewall rules with interface-lists to "unknown", resulting in a not working internet connection after the upgrade. NAT-Rules seem to be corrected, as this changelog tells. I'm currently manually correcting them for 400 rules. My last compact-export is...
by notToNew
Wed Jul 06, 2016 3:19 pm
Forum: Announcements
Topic: v6.35.4 [current] is released!
Replies: 51
Views: 27113

Re: v6.35.4 [current] is released!

It does not work Simple Queues Disable fasttrack I found the cause for this: Winbox sometimes automatically added the Target-Device a second time, in my case the bridge-internal. This did not work. Removing the second occurance of "bridge-internal" brought back simple queues. @Mikrotik: P...
by notToNew
Thu Jun 16, 2016 7:52 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

After Upgrade from 3.34.6, all NAT rules got an non existing "in-interface-list" set. Example in-interface-list=*1389 resulting in all rules stopped working. The number (1389) is increasing in each rule. when i remove this manually, everything seems to work. I could only see this in NAT ru...
by notToNew
Sat May 28, 2016 7:28 pm
Forum: Announcements
Topic: v6.35.2 [current] is released!
Replies: 64
Views: 29520

Re: v6.35.2 [current] is released!

We're still seeing our logs FLOODED with SNTP date/time updates or changes, either something isn't right, or MIkrotik decided to just recently start LOGGING every time the SNTP updates, which I cannot understand why anyone needs that information, and it just floods the log cache so that you cannot ...
by notToNew
Wed May 25, 2016 5:11 pm
Forum: Announcements
Topic: v6.35.2 [current] is released!
Replies: 64
Views: 29520

Re: v6.35.2 [current] is released!

Using v6.35.2 on my 2011UiAS-2HnD Simple queues not working :shock: :shock: :shock: Make sure you are not using fastrack .... my 2011 simple queues work fine on v6.35.2 but without fastrack. JF Hm, I have the same issue with simple queues, which worked fine in 6.32.x. I'm not using fasttrack (all f...
by notToNew
Tue May 24, 2016 11:19 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Version 6.36rc16 has been released.
*) firewall - allow to add domain name to address-lists (dynamic entries for resolved addresses will be added to specified list);
Nice!!!
by notToNew
Tue May 10, 2016 8:52 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

is it possible when using wireless-rep and wlan1 is currently NOT connected, that i can use wlan1-subdevice in AP-mode? Currently, the virtual subdevice in the repeater-config is always automatically disabled, when wlan1 doesnt get a connection. This makes the repeater-mode somehow useless for me. D...
by notToNew
Mon May 09, 2016 10:16 am
Forum: Announcements
Topic: Newsletter 71
Replies: 66
Views: 29218

Re: Newsletter 71

I just hope that the next version of the hap ac will get at least 32MB of NAND.
by notToNew
Tue May 03, 2016 6:28 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 155629

Re: HAP AC

Please consider releasing a 2nd release-version of this device with more NAND, at least 32MB. I like the device, and i like the proce, but 16MB NAND is almost to less to debug the device. I just had to uninstall most packages including advanced-tools, ipv6, lte, ... just that the device allows debug...
by notToNew
Tue May 03, 2016 11:25 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

notToNew - This is not LCD configuration but try to delete init-delay configuration and import afterwards. Does device on which you test import support init-delay and actually has firmware version with init-delay support? Sorry, I should have added that it's not LCD. The Test-router is a simple Rou...
by notToNew
Tue May 03, 2016 9:43 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 80029

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

jondavy - Please provide an example of export which you are not being able to import afterwards
I have one as well ;-)
#line 1407 + 1408
set cpu-frequency=650MHz init-delay=0s memory-frequency=300MHz \
expected end of command (line 1 column 26)
by notToNew
Mon May 02, 2016 4:30 pm
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

[solved] Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

Thanks to the support, we found a solution. Just change phase2 from "ah+esp" wo "esp".
by notToNew
Thu Apr 28, 2016 6:55 pm
Forum: Announcements
Topic: v6.35.1 [current] is released!
Replies: 84
Views: 26983

Re: v6.35.1 [current] is released!

when restoring a config and space is very low, I get an errormessage, which leads me to a totally differen cause... It says, restoring config is not possible.
Do you create a local tempfile while restoring?
by notToNew
Thu Apr 28, 2016 2:41 pm
Forum: Announcements
Topic: v6.35.1 [current] is released!
Replies: 84
Views: 26983

Re: v6.35.1 [current] is released!

wireless-rep still does not work with an old Intel 2200BG wireless card in AB-Bridge mode.
wireless-cm2 works.

Just a note: I already reported this at http://forum.mikrotik.com/viewtopic.php ... 50#p522747
by notToNew
Wed Apr 27, 2016 2:51 pm
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

It is reproducable after a restart and with Firmware 6.34.4 and 6.35.1, so I sent in the supportfile as Ticket#2016042766000718.
Thanks for your help!
by notToNew
Wed Apr 27, 2016 10:05 am
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

Ok, i got this error using aes-128 ctr. Now I changed to aes-128-cbc and i get a different error: The Mikrotik-Site -error: failed to pre-process ph2 packet The Fortigate-Side-error: notify msg received: NO-PROPOSAL-CHOSEN So it seems, that the Mikrotik did not choose a Proposal from the fortigate-s...
by notToNew
Tue Apr 26, 2016 5:35 pm
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

Thank you. Now, the Mikrotik seems to not accept the proposals from the Fortigate? "invalid length of payload"? 16:22:18 ipsec,debug,packet IV was saved for next processing: 16:22:18 ipsec,debug,packet 222ec2f7 1e85e487 e5e6c6c1 18ead494 16:22:18 ipsec,debug,packet encryption(aes) 16:22:18...
by notToNew
Tue Apr 26, 2016 3:20 pm
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

Here are the logs.
Can't find the error, do you see any?
by notToNew
Tue Apr 26, 2016 1:32 pm
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

Thank you that helped a lot. Now i get much more new logs. I goggled for "NO-PROPOSAL-CHOSEN", but what I foud is to check PFS-Group (which is DH5) and correct on both sides! Any further ideas? 12:21:17 ipsec,debug,packet phase2 IV computed: 12:21:17 ipsec,debug,packet 14f00d8d a63883ee 6f...
by notToNew
Tue Apr 26, 2016 12:10 pm
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

Re: IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

I tried to ping the other side, but always get a timeout. Should I see anything in the Log when pinging, while the phase2 gets initiated? There is nothing to see there, so nothing i can report here. Do i have to enable phase2-debugging? Edit1: I get a new entry in "Route list" which tells ...
by notToNew
Tue Apr 26, 2016 11:14 am
Forum: General
Topic: [solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help
Replies: 12
Views: 11128

[solved] IPsec Mikrotik to Fortigate Phase2 trouble, pls. help

Hi all, i have set up some vpn connections and I have several IPSEC-VPNs between my Fortigate-Devices. Now I want to connect a Microtik to my VPN-Net. Phase 1 works without any error (at least, no error i see on the debug-log) on both sites. But I never see an installed SA, and I never see traffik. ...
by notToNew
Thu Apr 14, 2016 4:53 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: v6.35rc [release candidate] is released, new wireless package!

When using the wireless_rep- package and adding the wan1-Device to a bridge called "bridge-wan" *and* using "connect-list", bridge-wan does not get an ip adress from dhcp. (as station) Removing it from the bridge it recives the ip immediately. Connection it to station without usi...
by notToNew
Tue Apr 12, 2016 10:56 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: v6.35rc [release candidate] is released, new wireless package!

Why not use the existing wireless "connect list" feature ?
simply didn't understand this function! Thanks a lot for pointing me there, i will try it!!!
by notToNew
Sun Apr 10, 2016 11:12 pm
Forum: Announcements
Topic: MikroTik smartphone app (ex Tik-App)
Replies: 448
Views: 186486

Re: Tik App, MikroTik android utility ALPHA test

v28 works, v29 crashes at connect., always!
Sent the chrashlog per mail, hope this helps.
by notToNew
Fri Apr 08, 2016 10:06 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: v6.35rc [release candidate] is released, new wireless package!

Did someone try to this new feature? >> wireless background scan I wanted to script a background scan for known Wifi-APs and if found, connect to it automatically. The Microtik is in a car, and I know several Wifi along the road (while stopping the car!). The Idea was: Scan for known ssid's (or MAC....
by notToNew
Thu Apr 07, 2016 9:25 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re:

When everyone who bricked a device by update would send it to mikrotik back for warranty repair, it would make mikrotik to think and test twice before releasing harmful versions to public. I hope that they pay no cent for sending in a device which is bricked because you installed a nightly build. J...
by notToNew
Mon Apr 04, 2016 2:55 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: v6.35rc [release candidate] is released, new wireless package!

Then they are not RC. Similar naming problem as "Current".
Right! Current RC-Branch should go to "development"...
by notToNew
Fri Mar 18, 2016 12:47 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: Intel 5300AGN ping loss

I use 6.35rc26 wireless-rep (AP mode), my laptop (WIN7 INTEL wireless 5300AGN) had a lot of PING loss, when I changed to WIRELESS-CM2, everything is normal.
Can reproduce this with 6.35rc31 on Basebox2. Switched back to WIRELESS-CM2 as well.
by notToNew
Fri Mar 11, 2016 8:21 pm
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 17559

Re: Winbox3.2 released!

Please add possibility to change default data folder "D:\Winbox" instead of "C:\Users\....\AppData\Roaming\Mikrotik\Winbox". It`s useful for real-time syncing
+1
+1 ;-)
by notToNew
Wed Mar 09, 2016 2:09 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: v6.35rc [release candidate] is released, new wireless package!

Had the same on 952Ui-5ac2nD. Downgraded to rc19 and it is stable again.
by notToNew
Wed Feb 24, 2016 6:46 pm
Forum: General
Topic: Mikrotik SSTP + Softether
Replies: 9
Views: 6956

Re: Mikrotik SSTP + Softether

Did someone here find a solution or workaround for this?
by notToNew
Mon Feb 22, 2016 3:15 pm
Forum: General
Topic: hAP ac lite RB952Ui-5ac2nD POE-in problems
Replies: 2
Views: 2517

Re: hAP ac lite RB952Ui-5ac2nD POE-in problems

Did you solve your problem? Have the same issue...
by notToNew
Mon Feb 22, 2016 12:28 pm
Forum: Wireless Networking
Topic: Set Wireless to Station + AP Mode Simultaneous? WISP Client?
Replies: 68
Views: 66036

Re: Set Wireless to Station + AP Mode Simultaneous? WISP Client?

Using a hAP ac lite works as well. There are 2 build in radios (2.4 and 5GHz). My Cellphone connects to both of them, so i use one for the hotel-wifi and connect my devices to the other radio! Great device for this! I also thested the new 6.35rc12: works as well for most cases, could use it with win...
by notToNew
Mon Feb 22, 2016 12:23 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 131259

Re: v6.35rc [release candidate] is released, new wireless package!

Tested the repeater-mode on hap-ac lite: it works with win10-laptop, with android-phones,but not with winXP-Wifi. This simply doesn't get an IP. 11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected 11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: reassociating 11:20:31 wireless,info 00:0...