Community discussions

MUM Europe 2020

Search found 9 matches

by fernandf
Sun Nov 04, 2018 10:08 pm
Forum: Forwarding Protocols
Topic: Azure IPSEC tunel with BGP
Replies: 4
Views: 995

Re: Azure IPSEC tunel with BGP

When you are configuring the Azure side, the system give you an example config script for different routers.

I have downloaded the Cisco ASR-ISR.

Cisco config attached. In theory, I would need an equivalent config for RouterOS.
by fernandf
Sun Nov 04, 2018 2:13 pm
Forum: Forwarding Protocols
Topic: Azure IPSEC tunel with BGP
Replies: 4
Views: 995

Azure IPSEC tunel with BGP

Hi, I have a RB951G-2HnD connected to Azure using IPSEC. With static routing, it works without problem, but when I use BGP to pass the routes I'm not able to make it work. I create the BGP peering and the routes are propagated both from Azure to my RB951G-2HnD and from the RB951G-2HnD to Azure. Alth...
by fernandf
Wed May 23, 2018 5:13 pm
Forum: General
Topic: Problem setting lifetime on IPSec peer
Replies: 3
Views: 491

Re: Problem setting lifetime on IPSec peer

Thanks to both.

CZFan, it's only a lab for PoC with dynamics IPs. In any case, thanks for your warnning. :-)
Edited to avoid some bad persone break my lab.

Sindy, I didn't know these numbers were generated on the fly. Thanks for the explanation.
I'll email the support team following your advise.
by fernandf
Wed May 23, 2018 5:07 pm
Forum: General
Topic: Azure S2S VPN Poor performance
Replies: 4
Views: 710

Re: Azure S2S VPN Poor performance

Thanks Sindy!
I thought in that possibility. Without HW acceleration I expected a low throughput but not as low as 27Mb/s.

Then, this value could be considered normal for my router?
by fernandf
Sat May 19, 2018 8:26 pm
Forum: General
Topic: Problem setting lifetime on IPSec peer
Replies: 3
Views: 491

Problem setting lifetime on IPSec peer

Hi, I'm creating an IPSec peer using the following command: /ip ipsec peer add address=*******/32 dh-group=modp1024 enc-algorithm=aes-256,aes-128 exchange-mode=ike2 secret=******** lifetime=8h If I check the lifetime in winbox or in the CLI the parameter doesn't appears. [admin@fdlmkt01] /ip ipsec p...
by fernandf
Sat May 19, 2018 8:17 pm
Forum: General
Topic: Azure S2S VPN Poor performance
Replies: 4
Views: 710

Azure S2S VPN Poor performance

Hi, I'm just testing the following scenario: IPSEC site to site VPN Mikrotik to Azure RB951G-2HnD firmware 3.41 ROS 6.40.8 in the onpremises side VpnGw1 in the Azure side When I copy a file from an onpremises Windows to other Windows in the cloud the router's CPU goes to 100% and the throughput is a...
by fernandf
Sat May 19, 2018 7:23 pm
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 314
Views: 62307

Re: Usage GPON module SFP in Spain

Someone has got the Zisa module working with movistar? In this link they say it is working with Orange and that it should work with Movistar. https://www.valero-torres.es/2017/08/24/sfp-gpon-funcionando-sobre-ftth-de-orange/ How do you get the SLID and the PLOAM from your current ONT? Any hope to ha...
by fernandf
Wed May 18, 2016 3:23 pm
Forum: General
Topic: Feature Request: Full soport for a ITU-T G.984
Replies: 3
Views: 1284

Re: Feature Request: Full soport for a ITU-T G.984

I have the same need as routiti. Would be great, be able to connect directly the router to the movistar network.
by fernandf
Fri Feb 19, 2016 4:05 pm
Forum: General
Topic: Feature Req: IKEv2 server and client
Replies: 291
Views: 82580

Re: Feature Req: IKEv2 server and client

+1
I also need it for connecting to the dynamic gateway in Azure.

Please! ikev2 ASAP.