does anyone knows that Mikrotik RouterOS support this module?
http://www.fcsgroupltd.com/sale-7852800 ... t421e.html
i like to report that
0x0bda / 0x8153 USB Ethernet controller working fine in V7b5
thank you !
nothing.Try to upgrade to same as KVM CHR ROS version and set tunnel id 1. Also check logs and sock proxy for strange stuff.
[admin@MikroTik] /ip cloud> print ddns-enabled: yes update-time: no status: connecting...
On Esxi 6.5U2 Hoston VM? or directly instlled on pc?Sent from my C6833 using TapatalkroutingMaybe. What does it do?
with no firewall and queues
noWhat does it fix excatly? Does it improve connection stability?*) lte - fixed LTE band setting for SXT LTE;
there is no Firewall and queueWinbox shows 1 CPU, so only one core configured in your VM settings.
What RouterOS config you have? Firewall, NAT, any other config? In any case, 50% CPU usage is normal.
normis believe me 6.5GHz is not Little50% is little usage. You still have 50% unused CPU resources. You could route much more traffic.
Hi normisWhat is your question? You haven't even used half of your CPU resources (wasting them).
add some documents
irghost, raffav, Cha0s - Seems that we have found an issue with new TLS matcher. We will try to fix it as soon as possible;
ME 3Doesn't work for me either. Neither by full name, nor wildcard.
P.S. Also, why is this matcher added to NAT rules? There's no info about TLS hostname in TCP SYN packets
still there is no document on this now abilityviewtopic.php?f=2&t=128449
here is some info,
but this functions dont work for mee ...
[admin@A] > routing bgp peer add remote-address=10.0.0.134 remote-as=65000 address-families=ip,ipv6
Use USB Power injectorI have same problem with e3372 and RB2011UiAS-2HnD-IN. Any solution?
are you using original OTG?It's weird. I got it up running once. It showed up under /interface lte
But then I had to unplug the device, and now its not showing up again.
Have tried reboot router and unplug a couple of times without success.
yes RB951 can easy cover over 200sqmCould you explain this more,I am not following, is the signal strength to strong on my rb951?
do you use PPPoE ,PPTP,L2TP ,........... ?Hi guys, thanks for the answer!
It is really help me to decide.
So, it is better for me to pick RB750Gr3 or RB3011 then?
The 3 computer lab and 4 special room already have Unify AP.
U are So funny m8teaser:
What's new in 7.0 alpha *) added support for UDP OpenVPN;
where? i cant find it*) lte - added passthrough support (CLI only);
add action=mark-connection chain=prerouting dst-address-type=!local hotspot=auth in-interface=LAN new-connection-mark=WAN1_con per-connection-classifier=both-addresses-and-ports:2/2
I want to know "which chain is H pol and which is V pol"why do you need this info? Point the antenna in a way, that the cable goes down, and all will be OK
https://mikrotik.com/product/RBMetal9HPnNo, that device an an 802.11b/g/n 2.4GHz device. 802.11ah is 900Mhz.Does RBMetal9HPn Works with 802.11ah?
Or Why not?
They are not compatible.
nice RCVersion 6.40rc8 has been released.
*) defconf - added IPv6 firewall configuration (IPv6 package must be enabled on reset);
*) defconf - replaced IPv4 firewall configuration with improved one;
khodam midonam azizam netinstall o format fayde nadareFormat nand from routerboot. Before formating try backup your license
Sent from my C6833 using Tapatalk
tanxYou can use the ability to include configuration scripts (RSC files). In there, use the commands:
"/user add name=other password=other group=full"
"/user set 0 password=difficultpassword group=read"
or something along those lines
[/ip arp find address=172.16.1.254 and mac-address=AC:7B:A1:B3:D4:77 and dynamic=no ]
where?!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces (http://wiki.mikrotik.com/wiki/Manual:Loop_Protect);
and when i use vpn client on PPPoE ( On powerbeam )Like the powerbeam would be the source of the problem...
problem :Now you are suddenly talking "problems"...the problems are radios not cable
Do you have a problem, and what is it?
yes but it must work with /64 pool because it has /64 free that can complete with EUI64 ( it works in windows server )Because each client gets a /64 probably.there it is
the problem is
assignment does not work with /64 pool
show itI have pptp server running on RouterOS providing IPv6 connectivity to its clients. I'm not sure if this is the goal of the OP, or even if this is what you're saying is not possible.Router OS does not support ipv6 assignment on any VPN protocol
there is so much spam post like ur postMany of people are like this here... Shame on them.
i have RB951 and RB2011 ( MicroUSB )Some time ago I added that modem to a RB951, I had the same problem, and it was solved by the update to 6.35.2
UP UP UP UPYou need to specify which traffic do you want to filter.
Incoming from WAN ? Originating from LAN going to WAN ? Scanning your users' IPs by your users ?
/ip firewall mangle add action=route chain=prerouting in-interface=LAN1 route-dst=188.8.131.52
ip firewall filter add chain=input protocol=udp dst-port=53 in-interface=interface-name action=drop
i flush the dns cashThis is normal, what you see there is the "remaining TTL" in the resolver cache, which is counting down to zero.
by mrz » Thu Oct 16, 2014 11:23 amAs it was mentioned earlier in this topic
i know what's that meanYou can set a gateway to which the packet will be sent. It ignores the routing table.
NOP does not workAbout policy routing issue - we are not being able to reproduce this kind of situation here locally. Those who have this problem please test:
1) If disable/enable of routes helps;
2) If reboot helps;
3) If disable/enable of gateway interface helps.