MikroTik

irghost

i need to replicate BGP route from vrf1 to vrf2
i create RD for both vrfs and import rt to each other
but the route is not working

irghost

https://imgur.com/a/QbR9jlt

Image does not load

irghost

Hi everyone
I didn't find anything about WiFi 6 and MU-MIMO in https://help.mikrotik.com/docs/display/ROS/WiFi
all the thing that the document said Is Qcom-ac supports MU-MIMO and beamforming

DOES Wifi-qcom support MU-MIMO and beamforming?

irghost

any update on this?

irghost

Hi
Im wondering If i install another minipci-E LTE module like ec25 on LtAP LTE kit , Do I need extra LTE antena ? I didn't purchase Ltap lte kit yet

irghost

The Wireguard IPv6 peer bug is also still present on this version.

1+
::/0 in allowed address

irghost

There are two branches v6 and v7. Each of them has their own channels, if there is v7 "testing", "stable" or whatever, it does not replace versions in v6 channels. There is only one released v7 version (7.1), so it basically fills all the channels of v7 branch until newer versio...

irghost

High memory usage on Caplite and RB750gr3 after 7.1b6
(About 16 MB more than version 6.49 )
6.49 => 44.1MB free memory
7.1b6 => 27MB free memory

irghost

wrong voltage on 750Gr3

/system/health> print 
Columns: NAME, VALUE, TYPE
#  NAME     VALUE  TYPE
0  voltage  0.5    V

irghost

wireguard Peer problem with "::/0" still exist

irghost

ros7.1rc3 + winbox 3.30
does not accept and save "::/0" as allowed address in wireguard peer configuration (GUI)
but with command line its Ok

irghost

In ROS7.1rc3
openvpn client forced to use username or password
but in openvpn username or password is not necessary and u can authenticate using your certificate

irghost

Hi
every mikrotik device has onboard TTL interface (TX,RX,GND,3.3V pins) but it does not work
i need to use it as RS232 console port
how could i enable it ? (maybe some hardware or software hacks)

irghost

RB750Gr3 v6.48.2
System/Health does not show any info if the Router did not(Power Lost) shutdown properly

irghost

I'm using the LHGG LTE6 device and after upgrading to 6.48.2 , I'm not able to access with winbox or web UI. I also tried ssh and telnet but no luck . Kindly help me out

Netinstall

irghost

Hi
does anyone knows that Mikrotik RouterOS support this module?
http://www.fcsgroupltd.com/sale-7852800 ... t421e.html

irghost

Ping tool does not show any interface

irghost

https://wiki.mikrotik.com/wiki/Manual:C ... stallation

irghost

parent proxy? For socks5
please

irghost

Software ID on RouterBoards depends on nand chip I'm sure about that.

irghost

Hi the repairman said that he change CPU chip and License on my QRT5 board(it cost me a lot to do this ). but I think he is lying because the device software id and Serial number and License key did not change. He said he changed CPU chip and he gave me back the broken one with AR9342-Bl1a name on i...

irghost

Radius authentication for Socks5
and something like Parent proxy Option

irghost

hi @strods

i like to report that
0x0bda / 0x8153 USB Ethernet controller working fine in V7b5

thank you !

Hi
what is your Device model? (usb and Routerboard)

irghost

I have same problem with rp_filter=strict

irghost

Version 6.47beta19 has been released. Before an upgrade: 1) Remember to make backup/export files before an upgrade and save them on another storage device; 2) Make sure the device will not lose power during upgrade process; 3) Device has enough free storage space for all RouterOS packages to be dow...

irghost

Hi here is the regex that im using http://l7-filter.sourceforge.net/layer7-protocols/protocols/socks.pat # SOCKS Version 5 - Firewall traversal protocol - RFC 1928 # Pattern attributes: good notsofast notsofast # Protocol groups: networking ietf_proposed_standard # Wiki: http://www.protocolinfo.org/...

irghost

we have same problem on CHR

irghost

Linux kernel has upgraded from 3.3.5 to 4.14.131.
Cource of this information?
Unpacked .npk file
V7.png

which program did you use to unzip?
7zip

irghost

Linux kernel has upgraded from 3.3.5 to 4.14.131.
Cource of this information?
Unpacked .npk file
V7.png
7zip

which program did you use to unzip?

irghost

Has anyone tested version 7 on RB4011(or RB3011) ?

irghost

irghost

Does Woobm work with devices other than Mikrotik?such as cisco devices?
or any devices with a usb-serial interface?

irghost

CCR] > port print Flags: I - inactive # DEVICE NAME CHANNELS USED-BY BAUD-RATE 0 serial0 1 Serial Console auto 1 serial1 1 auto There is one RS232 Male interface in front of the Router but where is the second one?

irghost

Hi
I bought new hAP lite today and I saw this!!!

irghost

Please check logs and ave you tried to ping routers if they can reach each-other?

they can ping each other with their public IP

irghost

Try to upgrade to same as KVM CHR ROS version and set tunnel id 1. Also check logs and sock proxy for strange stuff.

nothing.

they are same version
still not working

irghost

Hi I have 2 CHR (one on KVM and the other on ESXi) with EoIP tunnel in between on First CHR (KVM ) everything was OK until today, EoIP tunnel stop working First CHR(KVM ) Version 6.43.2 http://up.vbiran.ir/uploads/104015380618217010_2018-09-27_18-53-28.png Sec CHR (ESXi) 6.42.7 http://up.vbiran.ir/u...

irghost

I have Big problem with "Bridge" in CHR I find out if there is a difference between bridge MAC address and Interface MAC address Layer 3 traffic won't pass through that Bridge for exp: 2 RS To G8-2 ether 1500 00:50:56:A7:F9:10 4 R bridge1 bridge 1500 65535 00:50:56:A7:F9:10 then i can ping...

irghost

[admin@MikroTik] /ip cloud> print 
  ddns-enabled: yes
   update-time: no
        status: connecting...

on CHR last build

irghost

How about RM(rackmount) version of Hex?

irghost

Just guessing it could be the connection tracking and/or the dude. Also see the profiler. Do the previous versions behave the same with the same load? there is no dude and connection tracking- yes same memory usage with same load (with no traffic flow) recently I just added traffic flow with ntopng...

irghost

/system resource> print uptime: 2d21h26m22s version: 6.42.1 (stable) build-time: Apr/23/2018 10:46:55 free-memory: 661.6MiB total-memory: 976.3MiB cpu: Intel(R) cpu-count: 4 cpu-frequency: 2793MHz cpu-load: 45% free-hdd-space: 51.1MiB total-hdd-space: 95.3MiB write-sect-since-reboot: 48832 write-se...

irghost

on VM? or directly instlled on pc?
Maybe. What does it do?
routing
with no firewall and queues
Sent from my C6833 using Tapatalk

On Esxi 6.5U2 Host

irghost

Maybe. What does it do?

routing
with no firewall and queues

irghost

/system resource> print uptime: 2d19h15m34s version: 6.42.1 (stable) build-time: Apr/23/2018 10:46:55 free-memory: 672.5MiB total-memory: 976.3MiB cpu: Intel(R) cpu-count: 4 cpu-frequency: 2793MHz cpu-load: 44% free-hdd-space: 50.4MiB total-hdd-space: 95.3MiB Is this normal?

irghost

Hi

54.230.11.223

I saw this address inside the router

I don't remember if I set this or not

irghost

LTE Interface does not work in 6.42 http://up.vbiran.ir/uploads/10446152406381834859_2018-04-18_19-26-59.png http://up.vbiran.ir/uploads/39057152406382010066_2018-04-18_19-30-02.png I have upgraded 3 wAP and lte interface works, try to reset RB or downgrade to another stable and then upgrade again....

irghost

LTE Interface does not work in 6.42

irghost

interface GigabitEthernet1/0/47 switchport trunk allowed vlan 105 switchport mode trunk channel-group 1 mode active ! interface GigabitEthernet1/0/48 switchport trunk allowed vlan 105 switchport mode trunk channel-group 1 mode active ! http://up.vbiran.ir/uploads/10694152351776945004_2018-04-12_11-...

irghost

where is the ova Download link in download page?

irghost

*) lte - fixed LTE band setting for SXT LTE;
What does it fix excatly? Does it improve connection stability?

no
we couldn't change LTE band from 3 to 7
in older versions

irghost

sxt lte does not switch to band 7

irghost

first of all ,carrier aggrigation
second ,support for TDD LTE(band 42 43 ....) and FDD LTE on same device in same time

irghost

Today i am sharing my little experience with beginner like me, you can understand my post from title so no other words and lets start. This method will not effect any other website, i would like to block Facebook in my example. 1: Add website in Layer7 Protocol. /ip firewall layer7-protocol add nam...

irghost

2x Intel Xeon E5-2680v2 20Core / 40thread Well, it still doesn't answer the question. You have 20 cores, 40 threads, to use. When creating the virtual machine did You allocate 4 cores? To be perfectly clear: it is possible to allocate more threads than cores - you can allocate one core and 4 thread...

irghost

Winbox shows 1 CPU, so only one core configured in your VM settings.
What RouterOS config you have? Firewall, NAT, any other config? In any case, 50% CPU usage is normal.

there is no Firewall and queue
in first pic I configured 4 core , 50% usage = 6.5Ghz

irghost

Have You verified the core allocation, on the virtual host? Take KVM as an example: I can allocate (say) 4 cores, from my single CPU. But, then, I can tell the virtual host to allocate 8 cores, to the virtual machine. It is not a good idea, but can be done. So, question: did you really allocate 4 r...

irghost

50% is little usage. You still have 50% unused CPU resources. You could route much more traffic.

normis believe me 6.5GHz is not Little
why CHR with more Core use more CPU?

irghost

What is your question? You haven't even used half of your CPU resources (wasting them).

Hi normis
High Cpu usage is the main problem
why CHR with 4* 2.8Ghz Core uses 6.5Ghz for 2Gbps traffic
when CHR with 1*2.8Ghz core uses 2.5GHz for 2gbps?
both of them shows 50% in winbox

irghost

UPUP UP

irghost

http://up.vbiran.ir/uploads/10922151830212138483_2018-02-11_2-01-16.png 4core CPU 2.8Ghz CHR 6.41.2 Fresh install with defaults and just 2IP and 1 Default route update: I have change 4 to 1 Core CPU for this CHR and this is the result http://up.vbiran.ir/uploads/20386151830252629996_2018-02-11_2-11...

irghost

Version 6.42rc15 has been released. Changes since previous release: *) dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns"; *) dhcpv6 - make sure that time is set before restoring bindings; *) dhcpv6-client - added possibility to specify options; *) dhcpv6-s...

irghost

irghost, raffav, Cha0s - Seems that we have found an issue with new TLS matcher. We will try to fix it as soon as possible;

add some documents

irghost

Cha0s - Before the fix Traffic Flow, for example, instead of reporting 5 packets per flow reported 6 packets. Simply reported one packet more than flow has actually processed; irghost - Can you provide an example of rule which you have tried out and seen that it is not working? /ip firewall filter ...

irghost

*) firewall - fixed "tls-host" firewall matcher;

TLS-host does not work for me!

irghost

Doesn't work for me either. Neither by full name, nor wildcard.

P.S. Also, why is this matcher added to NAT rules? There's no info about TLS hostname in TCP SYN packets

ME 3

irghost

viewtopic.php?f=2&t=128449
here is some info,
but this functions dont work for mee ...

still there is no document on this now ability
i don't know how to use this for filtering

irghost

firewall - added "tls-host" firewall matcher

there is no documentation for this subject

irghost

*) firewall - added "tls-host" firewall matcher;

any documents?

irghost

/ipv6 firewall address-list add address=::/128 comment="defconf: unspecified address" list=bad_ipv6 add address=::1/128 comment="defconf: lo" list=bad_ipv6 add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6 add address=::ffff:0.0.0.0/96 comment="def...

irghost

/health works perfect but /hi does not When you add commands to bot (/setcommands) - you pushed Shift-Enter after first line or just Enter? If just Enter - it remembered only one command. It is little bit crazy but I do /setcommands dozen times until I realized that lines should be separated by Shi...

irghost

tg: Load config status: failed failure: closing connection: <400 Bad Request> 149.154.167.199:443 (5) after running this /system script run tg_getUpdates It seems to be wrong values in tg_config. Before error it should show your line like /tool fetch dst-path="disk1/tg_get_updates.txt" ur...

irghost

tg: Load config
  status: failed

failure: closing connection: <400 Bad Request> 149.154.167.199:443 (5)

after running this

/system script run tg_getUpdates

irghost

[admin@A] > routing bgp peer add remote-address=10.0.0.134 remote-as=65000 address-families=ip,ipv6

u need just to enable ipv6 in BGP peer

irghost

http://up.vbiran.ir/uploads/43163151014 ... 20Lite.zip
restart loop

irghost

Updated through Winbox, pressed "Download and install". Previous version was 6.40.4. Connection was over cable. Maybe it depends on this? What was already done: 1) Tried reset to default config - NO RESULT 2) Tried NetInstall 6.40.5/6.40.4/6.38 - NO RESULT (device is not visible) 3) Tried...

irghost

cAP Lite died after upgrade
I have Tried Netinstall but router does not shown in List also I have pushed reset-button for more than 300sec
CAP-LED and WLAN-LED are just Blinking

There is no problem with Netinstall (tested)

irghost

I have Tried Netinstall but router does not shown in List also I have pushed reset-button for more than 300sec
CAP-LED and WLAN-LED are just Blinking

There is no problem with Netinstall (tested)

irghost

I have same problem with e3372 and RB2011UiAS-2HnD-IN. Any solution?

Use USB Power injector
https://mikrotik.com/product/5VUSB

irghost

It's weird. I got it up running once. It showed up under /interface lte

But then I had to unplug the device, and now its not showing up again.

Have tried reboot router and unplug a couple of times without success.

are you using original OTG?

irghost

just Unplug Power wait few seconds then plug it back

irghost

uptime: 1m38s version: 6.36 (stable) build-time: Jul/20/2016 14:09:10 free-memory: 101.9MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 2% free-hdd-space: 108.4MiB total-hdd-space: 128.0MiB write-sect-since-reboot: 217 write-sect-total: 518172 bad-blocks...

irghost

RB1100Dx4

irghost

Could you explain this more,I am not following, is the signal strength to strong on my rb951?

yes RB951 can easy cover over 200sqm

irghost

just care about RB951TX Power, it has about 32-33dB EIRP (2watts)

I'm using cAP lite with 10dbm (Txpower) on day and 3dbm at night

irghost

dude Server uses lots of memory

irghost

What does This MicroUSB Port really do in this board?
https://mikrotik.com/product/RBcAPL-2nD-307

Number of DC inputs 	1 (PoE-IN)

says that there is 1 PoE IN for this board

irghost

use this
https://mikrotik.com/product/5VUSB
5V power injector for USB

irghost

Hi guys, thanks for the answer!
It is really help me to decide.

So, it is better for me to pick RB750Gr3 or RB3011 then?
The 3 computer lab and 4 special room already have Unify AP.

do you use PPPoE ,PPTP,L2TP ,........... ?

irghost

How Does that possible?

irghost

Ok maybe he has to be more careful in selecting a router then. I never use this "usermanager" and "hotspot" stuff so for me the only license level difference is between level 3 (for wifi devices that are only usable point-to-point) and higher levels (that can do anything I want)...

irghost

RB750Gr3 Is much better than RB2011
But it has license level 4
and just 5Gig Ethernet

irghost

It is actual copy from actual changelog.

OK Cool
Let Us test it

irghost

is there any news about SXT LTE? Your question was already answered! Unfortunately, currently SXT LTE does not support passthrough mode. What about netcut and ip scanner for who using hotspot and not managed switch with ubnt AP's ? Sorry, I don't understand, what are you talking about? Does SXT LTE...

irghost

teaser:

What's new in 7.0 alpha
*) added support for UDP OpenVPN;

U are So funny m8
RouterOS v7 is a funny joke

irghost

What's new in 6.41rc26 (2017-Sep-07 13:26): Important note!!! Backup before upgrade! RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload). This update will convert all interface "master-port" configuration into new bridg...

irghost

We r tired of trying to protect our hotspot users from their accounts hacking , and according to follow hackers we discovered that they depend on : _root their android handhelds _use hacking softwares : some softwares hacking accounts by copy users mac addresses , and others hacking by chap or pap ...

irghost

Unfortunately, currently SXT LTE does not support passthrough mode. irghost - What is the question about SXT LTE? Are you referring to Passthrough support? if you do, then take a look at this list: https://wiki.mikrotik.com/wiki/Supported_Hardware#4G_LTE_cards_and_modems Is there a plan for this or...

irghost

Hello, Complete noob here when it comes to routers and port forwarding. I have a strict NAT and I would like to try and open the ports, but I am really confused with all the buttons after I logged into the router. I've tried multiple tutorials about port forwarding but still keep getting strict NAT...

irghost

irghost - What is the question about SXT LTE? Are you referring to Passthrough support? if you do, then take a look at this list: https://wiki.mikrotik.com/wiki/Supported_Hardware#4G_LTE_cards_and_modems in last 3 release we have *) lte - added Passthrough support (CLI only); but why still no suppo...

irghost

What's new in 6.41rc17 (2017-Aug-22 11:58): Important note!!! Backup before upgrade! RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload). This update will convert all interface "master-port" configuration into new bridg...

irghost

Starting from RouterOS v6.41rc16 you can use the LTE passthough mode to pass the traffic from the modem directly to a host on some routers interface. tknuutil Multiple APN support like you posted in the picture will be supported only with WAP LTE modem. Information how to use the option is listed i...

irghost

What's new in 6.41rc16 (2017-Aug-18 13:44): Important note!!! Backup before upgrade! RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload). This update will convert all interface "master-port" configuration into new bridg...

irghost

*) lte - added passthrough support (CLI only);

where? i cant find it

irghost

add action=mark-connection chain=prerouting dst-address-type=!local hotspot=auth in-interface=LAN new-connection-mark=WAN1_con per-connection-classifier=both-addresses-and-ports:2/2 when we are dividing the numbers into 2 the Divide remaining are just 0 and 1 in your case u must Use 3/0 3/1 3/2 Hel...

irghost

add action=mark-connection chain=prerouting dst-address-type=!local hotspot=auth in-interface=LAN new-connection-mark=WAN1_con per-connection-classifier=both-addresses-and-ports:2/2

when we are dividing the numbers into 2 the Divide remaining are just 0 and 1
in your case u must Use 3/0 3/1 3/2

irghost

And what you expect? You understand? (من نمی دانم منظور شما چیست) This thread is for upgrade FACTORY firmware with one with Protected RouterBOOT support, not the "current"... as already writed: the mipsbe ar7240 are UNSUPPORTED!!! you can only upgrade "current" BIOS whit the fil...

irghost

the mipsbe ar7240 are UNSUPPORTED!!! (but protected routerboot work if factory firmware and current boot firmware >= 3.24). https://i.mt.lv/routerboard/files/ar7240_3.41.fwf /system routerboard> print routerboard: yes model: RouterBOARD SXT LTE 3-7 serial-number: ****************** firmware-type: a...

irghost

Thank you very much for reporting, we found that there might be some "protected routerboot" issues on RB750Gr3 (hEX r3), and only on some specific backup booter versions. If you have any related problems, please write to support@mikrotik.com Updated bakup BIOS for RB750Gr3 (hEX r3) can be...

irghost

Fasttrack does not work in 6.40.1 SXT LTE Can you see if the connections are marked as fasttrack? There is no fasttrack support for SXT LTE units yet! What's new in v6.40 (2017-Jul-21 08:45): !) lte - added initial fastpath support (except SXT LTE and Sierra modems); !) lte - added initial support ...

irghost

Winbox Ping Tool

video > http://up.vbiran.ir/uploads/38246150191 ... 6_ping.zip

irghost

Fasttrack does not work in 6.40.1
SXT LTE

irghost

irghost - Are you talking about blinking LCD during Netinstall process? This fix solved problem when LCD was blinking while device is booted on RouterOS. Next rc release will fix also blinking LCD during Netinstall process (latest Netinstall will be required). same as before LCD blinking with ether...

irghost

*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);

NOP
LCD still blinking after Upgrade

irghost

The RB921 with the ubnt card is transmitting at a higher power level then the disc. Depending on the antenna on the 921 the gain is higher on the 921 side also That is the reason the 2 chains differ from one another. the different Tx power between Radios is the reason why i have different between T...

irghost

Problem solved

irghost

why do you need this info? Point the antenna in a way, that the cable goes down, and all will be OK http://up.vbiran.ir/uploads/43747150174914619854_2017-08-03_12-13-48.png http://up.vbiran.ir/uploads/4113415017492269999_2017-08-03_12-59-35.png my first problem is " different signal between 2 ...

irghost

why do you need this info? Point the antenna in a way, that the cable goes down, and all will be OK

I want to know "which chain is H pol and which is V pol"
for personal reason

irghost

Hi
I can't find some documents about Disc Lite5 and which chain is H pol and which is V pol.

irghost

irghost

You can see that minimal supported RouterOS version is "factory-software: 6.35.4". You can not downgrade router below this version.

even with netinstall?

irghost

and the other device? sxt lite2?

irghost

Does RBMetal9HPn Works with 802.11ah?
Or Why not?
No, that device an an 802.11b/g/n 2.4GHz device. 802.11ah is 900Mhz.
They are not compatible.

https://mikrotik.com/product/RBMetal9HPn

RBMetal9HPn is our first product for 900MHz frequency.

irghost

MRU problem http://up.vbiran.ir/uploads/31151150108765636999_2017-07-26_21-15-31.png [amir@MikroTikFA-Amir] /interface> pppoe-client monitor "PPPoE - Livar" status: connected uptime: 2h51m15s active-links: 1 encoding: service-name: ShirazMobile.Com22 ac-name: Livar-CCR ac-mac: 4C:5E:0C:63...

irghost

but problem comes up after reboot
do not reboot it
or use scheduler on startup to disable/enable the led

the real solution

irghost

The RB2011 LCD blinking is fixed starting from RouterOS v6.41rc3. What's new in 6.41rc3 (2017-Jul-26 09:32): *) rb2011 - fixed possible LCD blinking along with Ethernet LED; If you notice this problem in v6.40, disable/enable LCD to stop it: /lcd set enabled=no /lcd set enabled=yes but problem come...

irghost

RB2011UiAs 2hnd LCD blinking after boot
watch this video http://up.vbiran.ir/uploads/25117150113 ... _video.zip
but router works with no problem

irghost

MRU problem

irghost

you must install lte package

irghost

do something for SXT LTE
Bridge between lte interface and ether1

irghost

Hi all
I'm looking for something that's helps me with "/PPP active"
with High Level

irghost

Good grief people. Wake up!! :evil: "irghost" wants to know if the Metal9HPn supports 802.11ah . How do you find the answer? NOT BY READING THE 802.11 STANDARDS. BY READING MIKROTIK SPECS ( routerboard.com ) AND, YES , KNOWING NAMING CONVENTIONS. Is it so hard to grasp? Or Why not? https:...

irghost

Does RBMetal9HPn Works with 802.11ah?
Or Why not?

irghost

[admin@AP] > /system resource print uptime: 1w2d1h10s version: 6.39.1 (stable) build-time: May/03/2017 08:17:10 free-memory: 40.9MiB total-memory: 64.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 10% free-hdd-space: 111.2MiB total-hdd-space: 128.0MiB write-sect-since-reboot...

irghost

[amir@MikroTik] /system resource> print uptime: 2d23h47m13s version: 6.40rc13 (testing) build-time: May/25/2017 12:53:01 factory-software: 6.36.3 free-memory: 32.7MiB total-memory: 64.0MiB cpu: MIPS 24Kc V7.4 cpu-count: 1 cpu-frequency: 400MHz cpu-load: 5% free-hdd-space: 109.5MiB total-hdd-space: ...

irghost

Version 6.40rc13 has been released. Changes since previous version: *) defconf - added IPv6 firewall configuration (IPv6 package must be enabled on reset); *) defconf - renamed 192.168.88.1 address static DNS entry from "router" to "router.lan"; Prefect there is no problem with ...

irghost

Version 6.40rc8 has been released.
*) defconf - added IPv6 firewall configuration (IPv6 package must be enabled on reset);
*) defconf - replaced IPv4 firewall configuration with improved one;

nice RC
it's messed up everything

irghost

loading kernel... OK setting up elf image... OK jumping to kernel code ERROR: no system package found! Kernel panic - not syncing: Attempted to kill init! Rebooting in 1 seconds.. RouterBOOT booter 3.33 RouterBoard 2011UiAS-2HnD CPU frequency: 600 MHz Memory speed: 200 MHz Memory size: 128 MiB NAND...

irghost

[amir@MikroTikFa-Foroozani] > system routerboard settings print ;;; Current RouterBOOT does not support this feature baud-rate: 115200 boot-delay: 5s enter-setup-on: any-key boot-device: nand-if-fail-then-ethernet cpu-frequency: 600MHz boot-protocol: bootp enable-jumper-reset: yes force-backup-boot...

irghost

also on RB2011 [amir@MikroTikFa-Foroozani] /system routerboard> print ;;; Current RouterBOOT does not support this feature routerboard: yes model: 2011UiAS-2HnD serial-number: xxxxxxxxxxx firmware-type: ar9344 factory-firmware: 3.22 current-firmware: 3.33 upgrade-firmware: 3.33

irghost

loading kernel... OK setting up elf image... OK jumping to kernel code ERROR: no system package found! Kernel panic - not syncing: Attempted to kill init! Rebooting in 1 seconds.. RouterBOOT booter 3.33 RouterBoard 2011UiAS-2HnD CPU frequency: 600 MHz Memory speed: 200 MHz Memory size: 128 MiB NAND...

irghost

http://up.vbiran.ir/uploads/37732149303808917104_2017-04-24_17-17-49.png [admin@MikroTikFA] /system routerboard> print routerboard: yes model: 951Ui-2HnD serial-number: ************** firmware-type: ar9344 factory-firmware: 3.19 current-firmware: 3.33 upgrade-firmware: 3.33 [admin@MikroTikFA] /syst...

irghost

Mikrotik does not support IPv6 NAT
you have just one single IP (/128)
Ask ur ISP for IPv6 PD (/48-/60)

irghost

Does (wAP LTE kit) support Carrier aggregation (CA) (CAT6) ??

irghost

Does (wAP LTE kit) support Carrier aggregation (CA) (CAT6) ??

irghost

Does (wAP LTE kit) support Carrier aggregation (CA) (CAT6) ??

irghost

Reboot does Not Work!!!!!!!

irghost

New Problem
No LTE Interface

irghost

Up
@normis
plz

irghost

what does that mean ?

irghost

*) dhcpv6-server - require "address-pool" to be specified;

what? DHCPv6 in mikrotik? Or DHCPv6-PD??

irghost

Hi, I've tested the hyperlink, that it's inside the fetch command: https://api.telegram.org/bot123456789:AAQFb1byb3LEwMes_TQeCM1k5wsFb_VguhG/sendMessage\?chat_id=123456789&text=Hello But It doesn't even send the Hello message to the group the bot is participating. The webpage says: "{"...

irghost

uptime: 16h20m10s version: 6.38.1 (stable) build-time: Jan/13/2017 05:51:35 free-memory: 95.0MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 4% free-hdd-space: 100.3MiB total-hdd-space: 128.0MiB write-sect-since-reboot: 4294 write-sect-total: 6550926 bad...

irghost

Format nand from routerboot. Before formating try backup your license Sent from my C6833 using Tapatalk khodam midonam azizam :) netinstall o format fayde nadare Netinstall ke na. Ba console boro too routerboot hamoon bios mikrotik az oonja gozine nand format bezan. Age ham dorost nashod ke bayad n...

irghost

Format nand from routerboot. Before formating try backup your license

Sent from my C6833 using Tapatalk

khodam midonam azizam

netinstall o format fayde nadare

irghost

uptime: 3d8h46m46s version: 6.37.3 (stable) build-time: Nov/28/2016 11:11:46 free-memory: 91.6MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 7% free-hdd-space: 105.0MiB total-hdd-space: 128.0MiB write-sect-since-reboot: 981237 write-sect-total: 2166112 ...

irghost

UP UP UP

irghost

This device already has a power jack. This is a place for another one.

place for battery?

irghost

what can i do with this 2 options

irghost

Here is my config for IPSec. Works with Mac OS & iOS. /ip ipsec mode-config add address-pool=ipsec name=ipsec split-include=192.168.1.0/24 /ip ipsec policy group add name=ipsec /ip ipsec proposal add enc-algorithms=aes-256-cbc,aes-128-cbc lifetime=8h name=ios pfs-group=none /ip ipsec peer add a...

irghost

You can use the ability to include configuration scripts (RSC files). In there, use the commands:

"/user add name=other password=other group=full"
"/user set 0 password=difficultpassword group=read"

or something along those lines

tanx

irghost

hi all
First : I have an access to "Branding Package Maker" in my client panel
my question is :
How can i Change ROS default password For my custom Branding package?

irghost

*) radius - added IPSec service (cli only);

please at it in Winbox

irghost

client side

irghost

With Mikrotik Local Secret 23:24:13 pptp,info TCP connection established from x.x.x.x 23:24:14 pptp,ppp,info,account amir logged in, 172.30.0.253 23:24:14 pptp,ppp,info <pptp-amir-1>: terminating... - too late authentication 23:24:14 pptp,ppp,info,account amir logged out, 0 0 0 0 0 23:24:14 pptp,ppp...

irghost

uptime: 3d8h46m46s version: 6.37.3 (stable) build-time: Nov/28/2016 11:11:46 free-memory: 91.6MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 7% free-hdd-space: 105.0MiB total-hdd-space: 128.0MiB write-sect-since-reboot: 981237 write-sect-total: 2166112 ...

irghost

 system,error,critical failed to enable panics driver

X86 vmware

irghost

What do you need station mode in CAPsMAN for? I cannot think of any real-life use case for it.

why?

irghost

That would be nice if there was more than one mode for capsman

irghost · Re: MTCIPv6E - Logo ? Fri Oct 21, 2016 5:50 pm

Fri Oct 21, 2016 5:50 pm

irghost

You can only use the tunnel EoIP (layer2)
OR PPTP-L2TP with BCP

irghost

add bridge interface with no Port
then add xx.xx.xx.xx/32 on bridge
http://xx.xx.xx.xx/userman

irghost

hi all http://s6.uplod.ir/i/00835/ijwovqsechb7.png Server: /interface bridge add admin-mac=02:B0:ED:BC:0B:83 auto-mac=no name=pptp-Bridge /ip pool add name=vpn-pool ranges=172.20.1.0/24 add name=PPPoE ranges=172.19.1.0/24 /ppp profile add bridge=pptp-Bridge dhcpv6-pd-pool=vpn_pool dns-server=8.8.8.8...

irghost

It does not exist

But I saw it in the catalog
Q3/Q4 2016

irghost

https://routerboard.com/RB3011UiAS-2HnD-IN

Page not Found

irghost

Use USB Powered HUBs

irghost

Yes
https://routerboard.com/RB3011UIAS-RM

Sent from my C6833 using Tapatalk

RB3011UiAS-2HnD-IN
UiAS 2Hnd IN

irghost

is that real?

irghost

hotspot does not support IPv6
so what can i do ???

irghost

hi all
i need to provide 2 Virtual AP on all of my Radios that managed by capsman

irghost

hi all
is there any Logo of "MTCIPv6E" for download?

irghost

irghost

this wouldnt work as you have put the quotes after the $ $"mac-address"; should be "$mac-address"; nop if u read the Doc for scripting variables which has dash between words should be used like $"mac-address" u can test it use this :log info "User $user with ip-ad...

irghost

Hmm, Can you try put the arguments in " quotes and see if that helps? What ROS are you running? this is not my problem here is my On logout script for my hotspot :local "hotspot_user" $user; :local "hotspot_address" $address; /ip firewall nat remove [/ip firewall nat find s...

irghost

yep

[/ip arp find address=172.16.1.254  and mac-address=AC:7B:A1:B3:D4:77 and dynamic=no ]

this find return 2 number instead of 1

irghost

hi all I use this code /ip arp remove [/ip arp find address=172.16.1.254 and mac-address=AC:7B:A1:B3:D4:77 and dynamic=no ] in my custom script but its work in wrong way and removes both (172.16.1.254 & 172.16.1.253) from ARP table i don't know why? http://up.vbiran.ir/uploads/116381476288008910...

irghost

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves. irghost , are you sure you have the latest release candidate version installed? On what RouterBOARD you can not ...

irghost

+ 1000000000000000000000000000000000000

irghost

http://wiki.mikrotik.com/wiki/Manual:IP/Fasttrack

irghost

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces (http://wiki.mikrotik.com/wiki/Manual:Loop_Protect);

where?
I cant find it ! (/interface ethernet)

irghost

Like the powerbeam would be the source of the problem...

and when i use vpn client on PPPoE ( On powerbeam )
there is no problem with dl speed ( 40 Mbps)

irghost

the problems are radios not cable
Now you are suddenly talking "problems"...
Do you have a problem, and what is it?

problem :
my PPPoE account limited at 40mbps for dl
when i use it on RB LHG5 its OK - download speed is 40mbps
but when i use it on Powerbeam the download is 7mbps

irghost

RB911G-5HPnD

irghost

Hello, I have three issues with 6.36 and 6.36.2 1) Winbox disconnects after a random interval 2) Can't ping hostname with aaaa record, for example: /ping thangorodrim.benesovi.eu invalid value for argument address: invalid value of mac-address, mac address required invalid value for argument ipv6-a...

irghost

As I can see the picture u posted... the difference could be the slit height and alignment issue. The UBNT is higher that the LNG just interchange the position and do a proper alignment and see what happens. Secondly please ensure that u are using original OUTDOOR CAT5 cable else u are bout to have...

irghost

The mismatch depends on the antenna specs of each equipment. They use 2 chains and usually they manufacturer use 2 different polarities in the same antenna arrange, The antenna on V Pol and H Pol doesn't have the same radiation patterns and the same gain at the same frequency, that said, If you hav...

irghost

And what is at the other end? The same 2?

both of them are connected to the same AP (RB911G-5HPnD)

irghost

i didn't re please them
they both are active

irghost

I had replace a lot of ubnt radios with LHG and gain was between 10-30dbi better than ubnt in the same spot. It's a winner for me. Not to say most of them didn't even had LOS. Now all signals are under -60 and previos where -70 to -84. Not to mention the price and the fact LHG doesn't rust. Your 13...

irghost

uptime: 1m38s version: 6.36 (stable) build-time: Jul/20/2016 14:09:10 free-memory: 101.9MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 2% free-hdd-space: 108.4MiB total-hdd-space: 128.0MiB write-sect-since-reboot: 217 write-sect-total: 518172 bad-blocks...

Search found 307 matches