Hello, Very odd thing, got a few CCR2004's in, by default they have no firewall rules, no default DHCP (was expecting them to be similar to hex S/rb4011 by default.) Anyway, configured and working but when I design Skin and save the file is written out but UI never shows the skin available to select...

Fixed original post, as config shows it is a /23 and the IP is in the /23 range, yes, one client gets full speed when run alone of 900 meg, but when both run at the same time they split is ~ 450/each versus the priority 7 queue taking up 800 and the priority 8 queue getting remaining 100. Anyone hav...

Having a very odd time figuring out why queue priority doesn't seem to be working for me. Test setup: Symmetric 1000/1000 connection, Hex S, Router OS 6.46.1 Two internal dhcp scopes 192.168.88.1/24 (lan) and 192.168.68.1/23 (guest) Test results from running speedtest on both at the same time is a 5...

Hello, I'd like to make a request that bandwidth test support hostnames not just IP addresses. In addition a default valuable settable via config so customers can more easily run speed tests if we open webgui to them in a limited mode. Having to type in an IP vs a hostname and having to remember wha...

Anyone found a solution to this? I've also had same issue. Even if I manually install and download the latest posted 2.9 build or a 2.8 build clicking "download and upgrade" reverts the switch back to 2.7p

Tim

I'd like to add my voice to the Mikrotik community stating this must be addressed before public release.

Tim

Before I start digging through old forum posts and random half articles I figured I'd ask if anyone has a good working juniper to mikrotik vpn config they could share? Maybe on the juniper side a show configuration | display set and on mikrotik side /export hide-sensative If not, I'll accept advice ...

Sorry, my point was scripted and non-interactive ssh Pretty odd I can't pass a password as i can for most other user functions. Breaks simple automation.

Tim

It appears there is no easy way to configure auto upgrade package source via cli as I can specify a username but not a password.

Is this a know issue/being worked on?

Tim

Actually discovered this before reading your post Paternot but thanks, that's exactly it!

Did 60 day free trial license, 1 GB now.

Going to buy a 10G license.

Tim

So I'm at a bit of a loss here. Setup a CHR instance on our xen stack and getting pretty consistently 1 mbit when "send" is selected as the direction (which appears to be when the selected server "sends" information to the tik I'm running the test on. The receive test comes in at...

So, I'm having an interesting time trying to find how to add a value to the end of an array. I'd like to use an array to ethernet errors detected in a for loop but I'm not finding a way to add to an array easily? I've got the logic down for finding the count of interfaces, polling the interfaces for...

Hello, Is there a way to do central firmware management / local firmware/software repo? Since Mikrotik has a reputation of making some odd changes from revision to revision we would like to be able to do central firmware/software management. Is this possible? Been googling around and couldn't find a...

Does anyone know from Mikrotik why after dhcp request during an active lease, if no answer, if it's configurable to drop the lease and initiate a new discover? Seems most desktop/routers do this periodically but the tik sends 4 renew on the port bounce then nothing until lease expires (just sticks i...

I think the major difference here (like juniper commit confirmed) is the timeout. So for example if your changing management IP's you are going to lose connection by virtue of changing management IPs
hence you can't use safe mode?

Tim

Hello, I'm experiencing an interesting issue. If an interface flaps on the WAN, the dhcp-client issues 2x DHCP Requests unicast to the existing gateway then 2x to broadcast (255.255.255.255) but if if the DHCP server on the network doens't send back a NAK then it sits there stuck in rebinding state ...

Hello, Having some odd issues with bridge VLAN not working, thinking I'm either missing something basic. Come from a Juniper switch environment so I've got the basic understanding so I'm confident I'm breaking something. The issues I'm seeing are: 1) A device plugged into ether2/ether3/ether4 does n...

Thanks a lot for the help, I've got the dual DHCP working with correct VLAN tagging but I'm not getting any data coming out the voice-wan. Oddly I can use the web interface on the voice IP of 172.16.65.252 but it doesn't answer pings. The data IP does answer pings 172.16.64.248 and works for web tra...

Hello, We have a specific usage case for dual WAN VLAN tagged traffic with two DHCP servers & LLDP med. I've got some experience with Juniper devices but having a hard time finding a working config for Mikrotik. We are using the RB2011UiAS-2HnD-IN I would like to use Ether1 as a master port with...

Does anyone have any good recommendations for a good training book (English (US or UK)? The only book I can find on amazon was last updated in 2011 (RouterOS by Example Paperback – November 1, 2011) Does anyone have any good recommendations? For someone with basic networking knowledge. (previous tie...