MikroTik

modsx

At least that's not how it works for me, because if I fix the center, it stops showing the changing alignment angles in % percent. Therefore, I leave "auto" and adjust through it (as usual).

modsx

When the SXTsq was connected to the 5 ac network yesterday, the network of the Hex S router started to jerk on all bridge ports. Failed to connect directly. Only Netinstall yielded results. When installing the experiment ROS 7.2. could only connect with the latest version of Winbox 3.35 (about which...

modsx

nRAY 60G link P2MP after update on 7.2 wireless dosnt connect. For the first time outside of long term. Let the devil quench my curiosity.

modsx

Is the Cube 60Pro ac whether they would work at 7 km ? Remember the gold formula: take the data published by MikroTik and divide by 2.5. P.S. The data I mentioned is for a stable connection. I'm not a lab worker or couch expert. All results have been tested in practice. There are, of course, manufa...

modsx

In my opinion, the current version of ROS 7 is designed only for arm devices and CPUs with four cores. When placed on an SXT 5HPnD with 400Mhz cpu, its processor often goes 100% down. I don't know what has changed, but old antennas with low-power cpu start to hang even with ROS 6.x.x when exposed to...

modsx

Still to use Windows 95? Don't install updates "bcause dont change a running system". Or what do you want to tell us? Just wondering. Basic wireless physics, MT is able to handle. According to the market segment / position with MT, everything is fine. But as soon as you ask for more, you ...

modsx

It's horrible to release a new product that only will support "old" software. It's not horrible. Please NOT realase new software! The old software at least works. Everything is OK. Devices with Wi-Fi chips usually require a few years of repairs and pioneers that will pass on all the error...

modsx

You write like "you sold me a bike that was promised to bring me to school but every 2 weeks it rains and I cannot go to school. and my homework is eaten by the dog and this is all caused by your bike". Of course that is not a reason to return the bike. You need to research what is really...

modsx

I would not consider a packet lost every few minutes on a wireless link a fatal problem that would require replacement or return of the equipment. Also it should not interrupt video conferences etc. Probably there is something else going on, and you think packet loss is the cause only because you f...

modsx

60Ghz is a standalone packet loss. Even in the warranty test under laboratory conditions, there is a packet loss every few minutes (at 1000ms ping which means seconds), but the warranty is denied because the Mikrotik ping tool shows 0% packet loss (MT is used https://www.ietf.org/rfc/rfc2925.txt alg...

modsx

For me, one nRAY constantly loses signals every few seconds. There were also problems with the other nRAY. I tried everything, nothing helps. Honestly, there is no Mikrotik W60G that would not have been a problem (so far the exception is the Cube60ac, but I think it's a matter of time). I am determi...

modsx

I would not allow the discharge through the cable screen to reach the RB. The external screen of the wires is usually grounded (if long, then in stages), but the last stage should not be used, if only for the inner core screen. But MT will not make such solutions, it is not carrier grade (even an RB...

modsx

The plastic case is also missing a slot for every port to attach a tie-wrap securing each cable in place, similar to Ubiquiti EP-R6 and EP-R8 devices. Probably only the angel will know when MT will learn to create a normal cable entry design. Equipment has to drill larger holes, no guards for empty...

modsx

Well, yeah, a lot has happened in a year with this. We upgraded to 6.48.2 recently (last month) and that has been pretty stable. It also opened up the ability to use channel 66000, but on the clients you have to add it to the channel scan for it to pick up. That does help a bit with another higher ...

modsx

I wrote a short script to disable and then re-enable the client CPE wireless interface so I can 'bounce' the wireless and have it try a different AP on re-enable. That does seem to work rather well, lots faster than remotely power cycling the entire CPE, which at times doesn't even budge it from th...

modsx

For a wISP, WiFi6 is the largest single improvement *ever* in wireless performance on single streams, then stacking 4x4 and 8x8 radio options with 2 way MU-MIMO..... Now stack on an extra Ghz in WiFi6E. Would love to see mikrotik lead the charge on this. Time to wake up. To use wifi6 8x8, 12x12 out...

modsx

Need to The Dude with one mouse click on the Device opens the Winbox. We are not woodpeckers!
P.S. It would still be nice if could drag&drop the Devices to another Network Map, but this is secondary.

modsx

I've encountered cases where the Limiting Queue Tree works with

/interface bridge set WiFiLan vlan-filtering=yes

but Simple Queue with

/interface bridge set WiFiLan vlan-filtering=no

modsx

Yesterday we in Latvia had a great opportunity to observe the 60Ghz MultiPoint experience. So far, neither snow, rain or wind, each in itself, has had much effect on link stability (perhaps a slight decrease in PHY rate). But yesterday the wind gusts 19 up to 22 meters per second and precipitation o...

modsx

I have seen that NRAY can be mounted rotated 90° changing antenna polarization this can help with rain and colocation? Yes for experimental purposes, that's why we used horizontal Ethernet gland. Please keep in mind that dish design has drain hole, that needs to be sealed if used like that. Antonsb...

modsx

You can not ping the device from the APs side or the clients side ? - PSE Omni side. It's common best practice to update all the software at same version... - Thanks, I will try to do that in the future. But, read all changelog between version and you find than between some version something is chan...

modsx

Uniform all to long-term 6.47.9 or stable 6.48.2, client included, (order do not matter) and also upgrade BIOS, and reboot after upgrade BIOS. Other TX device can interfere with armonics or with power, the wAP are plastic... Licensed TX usually have more power than device with free license... How i...

modsx

RouterOS ad BIOS version? [admin@ AP_60G ] > system routerboard print routerboard: yes board-name: wAP 60Gx3 AP model: RBwAPG-60ad-SA firmware-type: ipq4000L factory-firmware: 6.43.6 current-firmware: 6.45.9 [admin@AP_60G] > system resource print uptime: 2d1h8m15s version: 6.45.9 (long-term) build-...

modsx

but tends to disconnect by itself What do you mean by that ? Electricity is supplied but the ping does not go. There were reports from the customer of a complains, I turned off the electricity (probably the wireless worked, at least the power consumption was the same). I replaced the cable and PSE ...

modsx

My experimental co-locate. Each wAP 60Gx3 AP works on its own frequency with auto beamfroming. Clients are connected to the first and third, according to compatibility (regardless of the distance, others prefer 64800, others 60480). All links work perfectly. For the average wAP60Gx3, no one is conne...

modsx

Continuation of experience. I solved the problematic Cube Lite60 with Netinstall. When replacing the Cube Lite60 (near and far) with the Cube 60G ac I noticed a worse MCS and PHY rate. This was solved by moving them from AP with frequency 64800 to AP with 60480. Conclusion: You must have at least 3 ...

modsx

I also encountered strange things. I wanted to see the RouterOS log as current-too-low or voltage-too-low but it looks like it's just on paper. I tried to fix the problem like this https://youtu.be/sO7dn_usApo - but the problem didn't go away. P.S. Compliment MT, because the router is not at fault e...

modsx

I have concluded that the optics on the nRayAIM-DH1 are much more accurate than the signal adjustment via / interface w60g align wlan60-1. If adjusted through the optical cross, the antenna works but the software wants angle correction, but if it is adjusted by at least 0.5 degrees, then the link br...

modsx

I have noticed a problem with the link ustable / ping timeout in relation to the wAP 60Gx3 AP.
If at least one customer (like Cube60 in my case) has problems, they all have problems.
For this purpose I serve a backup wAP 60Gx3 AP to isolate the problem client while it is being replaced.

modsx

same problem here. all lhg are runing perfectly, but nray even at short distance are junk. Thanks for the information (the fact that nRAY has problems with the quality of production, I have already concluded and shown in the pictures (without a detailed description). Even the fingerprints on the le...

modsx

Make sure you use some self amalgamation tape on the ethernet connector gland or it might let water in ( bad design) Sounds like a sofa expert opinion. Have you looked at the design of this connection yourself? Everything is fine with him. I think someone did the wrong installation (the cable was p...

modsx

I also wait, but don't ask MT for it, they talk little, do a lot and never ionize the news before. Mikrotik was the first with a 60Ghz ad. If ay is delayed, there are obviously some reasons for this (the company's workload capacity, work to make the product cheaper or software delays). Everyone in t...

modsx

I found a hacky fix to this problem, but it works and can be done remotely. Interesting. P.S. All my PowerBox, sEX POE (same RB960PGS) have been unstable in power or power supply ports (all in the trash). The only stable solution that has never let me down is Omnitik POE (old/new). The price differ...

modsx

Interesting video.
I conclude that a good ethernet surge protection costs over 100 € - in the price of RB.
Then what's the point of complicating, we buy a spare RB instead of a Surge protection.
The backup can also be useful when other problems arise.

modsx

wAP 60Gx3 AP has from 6 to 10 db less RX signal than normal waP 60. Don't use it!!!

Please provide arguments for what you strange said.
Mikrotik does not publish power, but both antennas have EIRP power below 40. WAP60Gx3 AP mode will have the same power as WAP60G. P.S. Info from MT support.

modsx

Mikrotik, please provide full technical specification new revision RBGESP surge protector (https://mikrotik.com/product/rbgesp#fndtn-specifications). Did the change only affect improved IP67 weatherproof enclosure? P.S. The GPeR IP67 case should be purchased separately, depending on the installation...

modsx

If you need 5G or custom IOT... good. Otherwise this newsletter is a big disappointment.

Disappointed? You don't have to wait for anything. You just take the best from each manufacturer.

modsx

Be careful when adjusting the antenna with the existing solid mount bracket. Its locking screws (hex head screws for bracket tightening), when rotated to lock, make a positioning shift of a few degrees. Tested with Optics and Signals. Vertical fixation is weak. It has only two fixing screws that can...

modsx

Wireless Wire nRAY (nRAYG-60adpair) disassembly in photos https://bit.ly/35HMQ3k

modsx

I conclude: nstreme (incl. Nstreme version 2 = NV2) development, the required human resources and insufficient result - is not a rational ROI wireless solution, even considering the price of equipment. Even for a micro network. Many forum users are here because of the price. But the stingy pays twice.

modsx

RouterOS 6.47.7

802.11 - fastest, loses pings, doesn't handle 4 Cpe of active traffic.
nstreme - fast, loses pings, handle 4 Cpe of active traffic.
nv2 - slow, pings no loss, handle with 4 Cpe of active traffic.

modsx

Still problem: routerboard: yes board-name: wAP 60Gx3 AP model: RBwAPG-60ad-SA serial-number: AC8F0AE230F7 Wap 60Gx3 routerboard is pinging without any problems. Downgrade did not help. I come to the conclusion of a problem with electronics / wifi. The warranty is overdue for a month :(. When I rep...

modsx

Still problem: routerboard: yes board-name: wAP 60Gx3 AP model: RBwAPG-60ad-SA serial-number: AC8F0AE230F7 Wap 60Gx3 routerboard is pinging without any problems. Downgrade did not help. I come to the conclusion of a problem with electronics / wifi. The warranty is overdue for a month :(. When I rep...

modsx

Still problem: routerboard: yes board-name: wAP 60Gx3 AP model: RBwAPG-60ad-SA serial-number: AC8F0AE230F7 firmware-type: ipq4000L factory-firmware: 6.43.6 current-firmware: 6.48beta48 upgrade-firmware: 6.48beta48 Screenshot (168).png Screenshot (219).png

modsx

Something wrong ...
In picture

1987_hi_res-5f75899b1c476.jpeg

In reality

DSC_1237.JPG

@MT - please make a universal bracket

modsx

This forum is practically not censored (it is not in UBNT forums).
Obviously something went wrong, but without knowing the content no one will be able to give an answer here.
I recommend reading the rules and contacting the administration to find out.

modsx

It's not about cheap.
SXT works great.
CCQ on the client side is achieved with a professional installation, searching for a place (depending on the angle, Fresnel / Arago / Stand waves specific). Take MQS + Powerbank + ex.SXT and look for measurements.
For example, the old SXT.

modsx

It is comparing a big speaker box to a smartphone speaker. Both make sound. Hard to say... SXT Maybe not so evenly, but the SXT will probably deliver more concentrated energetic. I assume that the front to back ratio is not big for them but similar 30-35 (because horn high-frequency currents do not...

modsx

I could take measurements if I knew the beam angle of both frequencies. Is there such information?

modsx

Could this solution work if the mast on one side a bit moves in the wind. Distance 660m?

modsx

Can anyone suggest a bracket so that the Disc antenna can rotate vertically (because it is designed only horizontally) on the same bracket in the picture.

P.S.
OuickMountPro do not offer, it will all look like .....
Ubiquiti UBI-BR...?

modsx

We use RF Horns for a while and they are good.

RF horn 90* vs SXT 90* who wins and why?

modsx

Can anyone tell, what is the beam angle nRAY?

modsx

RouterBOARD OmniTIK PG-5HacD (6.47.7) --> RouterBOARD SXT 5HacD 2n r2 (6.47.7)

modsx

if you won’t to buy good Antennas, look for RF Element Horns, Radio is easy swap able, and you need no alignment after exchange, easy way to test mikrotik, mimosa, ubnt, cambium etc

Goodl idea. What good antennas can you recommend?

modsx

I only use ARMs as clients and I don't see any problem. I have throughput problem even with mibsbe in some cases, especially for client upload, or with NetMetal + mANT I only get 50Mbps throughput when with other vendors I get 200Mbps, but I think it's a mANT problem. We had a similar problem. mANT...

modsx

Does it work 60 GHz and 5GHz frequencies at the same time, or 5 Ghz switches only when drop 60 Ghz (or there will be a temporary break in the link)?

modsx

Don't understand why you need a 1Gbps port? Do you want to offer your customers a higher tariff plan than 100 Mbps with such an outdoor antenna? This could rather be the exception. I would choose not to put more than 130m from the WAP60x3 base station. I think the MT tests were performed in the maxi...

modsx

MT is able to create very good products for a small ISP. MT is not talking about the priorities of technological solutions, but everything you need to work in a micro network is already there. Don't ask MT for more than being their segment. For a well-designed micro network, MT solutions are the mos...

modsx

Would pair of LHG XL 52 ac be decent replacement for pair of QRT2, for PtP ? Using QRT2s because of tree foliage, haven't tried 5GHz yet in those conditions. 5GHz is more prone to obstacles than 2.4GHz, it is already lucky that your link works behind foliage, usually it is a big problem for wireles...

modsx

To me, this device looks like an offensive to a provaider, where it creates the basis for using the operator frequency indoors. Everyone will find it hard to indulge.

modsx

Our same router often switches to 100Mbps. We used wires (10G Ethernet RJ45 CAT6A SFTP Patchcord Cable 0.5M LSOH), so we thought that wires are not a problem. We changed the ports and even the end routers. Some ports end router are burnt out. And only when the wires were replaced (self-made), everyt...

modsx

Feature Request - Search by device Serial number (invoices, warranty, accounting, etc).

modsx

How thick is that cable? It works fine with all the shielded ethernets that I found here.

Normal outdoor cable 6-7mm

modsx

Not usable for normal cables :( https://lh3.googleusercontent.com/YZY6KgkBWs3RlqqnOHklo9gDYpH0qEsOme-IJosOO4i-3RLcw024ix400LYp4mZz3wEtQSxjl95TZzGxMvgZ3I1fBN6VLYV8L-BeHQEzknTP7QVxTxgOpoZ44W8AOZbAsIVUp0ikn2K4aCiXNMUNKcr8X1xOSccj0x59Rb_69dljDDR8-5xQHSsR6A9ywAVwhJswIblVndlfVnZch1N54r8BU5ZS8-mvQZkdp75j8b...

modsx

Hi! Many thanks for the courage and charity. If someone has the opportunity to do the same - welcome! I tested from Latvia (EU). This is not the best way to test from EU, because both servers are located in the USA. The first server is 50 hops (devices between) second 14. With both of them there is ...

modsx

We have a license for this frequency, but Mikrotik requires a minimum order of 20 antennas. This is another reason not to use mikrotik.

modsx

In my opinion, Disc is too ugly antenna to be mounted at all;), but yes, the price makes close your eyes.

modsx

When we can expect first pieces?
Inside photo from fcc

If the moderator will allow, then:

>> large pic

>> large pic

modsx

They do inform.
http://routerboard.com/RB750UPr2
"10/100 Ethernet ports 5"
http://routerboard.com/RB260GSP
"10/100/1000 Ethernet ports 5"

Uh, yes, thanks, finally I see (and only using "Ctrl + F")!

modsx

Hex POE Lite is only FE not GB Hex POE will be GB but not released ! Mistry7 Thanks for the reply, I realized that we made a mistake Routers purchased :shock: . It's also because MikroTik their specifications and brochures do not show whether it is 100 Mbps or 1000 Mbps :( , but the seller has made...

modsx

I do not understand why would have to buy a Gigabit POE Swith for $ 55.95, if you can buy the router for $ 59.95?
Where is the trick? -if swith to the operating temperature is lower, while energy consumption higher. Where are the pros?

modsx

Our tests (w/o interferences) showed: sectorial mANTBox 19s is better dbi signal, but the worse quality (jumping), while sectorial SXTG 5HPnD-SAr2 dbi signal is worse, but better signal quality (stability). MikroTik signal sensitivity board is measured without the antenna, it makes me think, that th...

Search found 73 matches