MikroTik

p4rv33n

Dear all, its good news for me we reached 1000+ customers for our company running as ISP. I am looking for a setup with premium quality service provider. Bad news is, I am still worrying that our backend is still not capable enough to adopt this change every month. I need all your suggestion as I am...

p4rv33n

I did changed IP again, and now its working.
Is there any way or some setup or server like 3rd party firewall to track it down my customer who is doing this.
I thing it will be possible if we now customer local IPs.

Any suggestion you guys?

p4rv33n

Thanks to all for suggestion, i did block port 25 SMTP. But again account.sonyentertainmentnetwork.com is blocked. This time Public IP is not blacklisted by Spamhaus.org. Showing error Access denied. It's really frustrating, i can't see any problem there. Any suggestion you all can provide in this i...

p4rv33n

HI all, Spamhuas is blacklisted my server public IP at that time i don't know about it. In current days our one customer facing issue about Sony playstation game server is not working via Our internet. Then he registered a compliant about it after some troubleshooting we find it was happend to Black...

p4rv33n

Actually I want to block some end users on the network that are sending email For some reason in the last month multiple end users "Opened an attachement" that made there computer start sending those attachment to all users in there contact list. What i want to do is to block those so the...

p4rv33n

we are also running Thedude, we are montering UBNT AP's. In the network map i can see how clients which are connected to the AP's also pulling AP name, IP, AP model, location and so on please let me know if this is what you guys want Yes , yes that's what I am looking for but in addition AP signal ...

p4rv33n

The UBNT-MIB file is at the bottom of this page. https://help.ubnt.com/hc/en-us/articles/210391987-airMAX-How-to-Enable-and-Test-SNMP I added those ubnt files to Files/mibs folder. Afterward, in my ubnt object, I am able to pull info via snmp walk, but it is in table form. Do you have instructions...

p4rv33n

I have an EPON OLT it is connected with Cisco switch on eth-23. I can see it's MAC address on bridge FDB of switch. And Cisco switch is directly connected with CCR-1009. Whole network is look like this.. CCR-1009(DUDE Installed)-------->Cisco Swicth(eth-23)--------->EPON OLT(ALL Custoners ONU). So I...

p4rv33n

Did you upload UBNT mib to your dude server?

How can I do this , I am new to this?

p4rv33n

I have same issue as above but I am not getting any MAC address on bridge FDB, all connected to CISCO switch I can see them on "show cdp neighbor".
Kindly help me.. I need this lot of task.

p4rv33n

Please help, I really need this as maximum devices is behind that Cisco switch so which i need to monitor.

p4rv33n

Hi all, I monitoring cisco switch that is directly connected to Dude server installed on CCR1009. But an UBNT wireless device connected to eth-10 of Cisco switch. Dude client showing only Cisco switch details but not showing anything for UBNT wireless device. From some forum help I am able add Ether...

p4rv33n

I want to delete dude configuration, how it's possible.
I did some research on google about that and find that there is some option in server setting but I can't see there a reset button.

I am using Dude 6.35.4.
Can anybody help about about this?

p4rv33n

Is hear anyone else who can help on this ?

p4rv33n

I have radius server, all customer end devices and Wireless devices are connected through with Cisco switch. And before server It connected with Dude server installed on Mikrotik CCR-1009. What want here is Dude need to monitor the devices those are connected behind that server, so i need to open 16...

p4rv33n

Can somebody help me on this!

p4rv33n

After fresh upload of dude server.npk file to My CCR1009 then i installed dude client on ubnuntu using wine. Connect them locally. But I can't connect to server via client. After some digging i found that /dude commands/options are not showing in terminal in CCR1009. I tried to Install several times...

p4rv33n

Why use socond router??? Isp give you one ip block routed to your ip. It is simple routing. Assing your wan ip to interface connected to isp and first ip from lan block to lan master interface or bridge if you have one. No need for nat if there are public ips. If they arent you have to nat. If you ...

p4rv33n

Here is anybody who can suggest me more better?

p4rv33n

Sorry WAN IP is x.x.x.0/30 and LAN IP's x.x.x.8/29. No I don't want another CCR1009 for the same. My main concern is why should I use a dedicated CCR1009 for WAN to LAN conversion of ISP link. There should be an another cheap alternative device that will do the same on 500 MB traffic. May be I am wr...

p4rv33n

Our ISP gave us a WAN IP x.x.x.2/30 and public Ip block x.x.x.8/29. My question is, is this necessary to put a L3 router (mine was CCR1009) to put on edge of the netowrk to access ISP Lan Ip's(x.x.x.8/29). I have no solution so I put a CCR1009 for that task. Is I am doing right? Please there is anyb...

p4rv33n

The problem is not the internal side, but the external users. When you have 2 connections with 2 different IP addresses, and you publish one of them to the external users (e.g. via DNS) you will be sending the traffic through one of the connections and when it fails you are no longer reachable. Thi...

p4rv33n

That won't work. You cannot take some standard ISP connects with fixed IP and then combine them into a single failsafe link and still have a public IP on that. To do this, you must have a multihomed connection i.e. you run BGP on your own router and peer with different ISP's. This is not something ...

p4rv33n

Does anyone here who can help me with this configuration!

p4rv33n

ISP 1 providing me a link with following IP's: WAN IP-x.x.82.0/30 Lan IP-x.x.82.8/29 ISP 2 providing me a link with following IP: WAN IP-x.x.253.246 mask-255.255.255.248 gatway-x.x.253.241 I am confusing how can I use Lan IP's ISP 1 if I am done load balancing(bonding) in my CCR1009 with failover. H...

p4rv33n

I dont hold much expertise on the mikrotik or freeradius subject, but still I am willing to contribute My two cents :) Following is a collection of my own R&D , its not very professional, not impressive, but still it may help new comers. On the Internet, information is very scattered on the rel...

p4rv33n

Hi all, I am new to Mikrotik, just searching around here from last couple of days but can't find anything usable to setup Mikrotik router with freeardius/mysql, freeside billing with it. So I started this thread to providing help like me and other who want to use full power of Mikrotik device so tha...

p4rv33n

Hi everybody, I am really enjoy here I am just started to learn RouterOS. Freeside vs Platypus? Which billing system is best, If we integrate it with Mikrotik and Freeradius. I want a pure billing that has extra features and maturity as I am running an ISP. I am already search on internet and found ...

p4rv33n

Change the IP address configuration - set 192.168.88.1/24 to be on the bridge interface, not on ether2.

Now its working....Thanks to all

p4rv33n

If you are not connecting with cable în ether2 change your lan ip and dhcp server on bridge

Sent from my Lenovo K50-t5 using Tapatalk

you means Lan ip of laptop connected to LAN of Routerboard?

p4rv33n

talking about CCR i think if your budget only allow for CCR1009 go for 1009 :lol: but if your budget allows it go for the http://routerboard.com/CCR1036-12G-4S this model has the best performance per dollar Ratio of the entire line in comparison of CCR1036 with CCR1009, 1036 costs 2x the 1009 but p...

p4rv33n

Hi all, I am setup my newly configured Routerboard 850Gx2 as par forum guidance and topics. Right now I am able to ping 8.8.8.8 from routeros, but can't able to access internet on Lan connected Laptop. Please help ? I am sharing my configuration. # jan/02/1970 00:49:18 by RouterOS 6.18 # software id...

p4rv33n

I don't advise that approach. you're putting all the eggs in the same basket (PC machine) if that machine fails, you'll be in a bad situation. If you're providing a WISP like service total network outages more than few minutes long (and even few minutes!) will make you lose customers really quick. ...

p4rv33n

The benefits of visualization of server is For Better Management you can sit on your single pc and manage all of your virtual servers . Better performance Reduce Cost I'm afraid I can't agree... You can sit on your single PC and manage all your routerboards. even in unconfigured state (mac-telnet, ...

p4rv33n

Routerboard hardware is much more reliable to provide a 24/7 service than PC hardware. On x86 the cost per ether port (speaking worthy NICs, although for a BRAS two ether ports are enough) is much higher and can cost almost the same price (4 port intel gigabit nic for example) than a RB1100AHx2 alo...

p4rv33n

Hi,
Which one is better Routerboard vs RouterOS on x86 ? If we use RouterOS with freeradius and freeside.
I am new for this method kindly share your observations.

p4rv33n

which hardware is best to use? Routerboard vs x86 And if I choose x86 then it is best to use with guestOS in visualization. In near future i will use freeradius and freeside with it and a monitoring software. What are the benefits of visualization of server? Kindly advice for above? sorry for late ...

p4rv33n

which hardware is best to use? Routerboard vs x86
And if I choose x86 then it is best to use with guestOS in visualization. In near future i will use freeradius and freeside with it and a monitoring software. What are the benefits of visualization of server?
Kindly advice for above?

p4rv33n

Hi, seems. u want to manage 1000 customers through pppoe authentication. it's a large number of customers you have . RouterBoard 1009 is Recommend for you with level 6 license . if you want make pc x86 router u need a high config pc with minimum 2 NIC card and maximum power supply unit with mikroik...

p4rv33n

There is anybody who can help me, I am looking to buy a hardware for next 3 Years.

p4rv33n

hi send me your software details @ lovely@elxireit.com we have developed a radius manager for this kind of application where user buys plan and uses internet according to the plan details with some of the features bellow Multiple NAS Multiple plans NAS specific plans multiple Prepaid vouchers per u...

p4rv33n

Hi. I am willing to buy a mikrotik device for bandwidth shapping, firewall rules and radius server, AAA as I need to run 1000 customers through it on pppoe authentication. I raising the questions, which is more better option Routerboard device e.g(1009,1036) or RouterOS x86 architecture on CPU hardw...

p4rv33n

My other exception to this that I mentioned earlier (having a server located somewhere else that you can make 3 tunnels to it and bond it) well, this is technically possible, but realistically, it is expensive because you'd have to buy a connection somewhere that was at least 174Mbps in order to gi...

p4rv33n

Thanks sir for your support!

p4rv33n

Is there is any one can help me with my requirement? kindly share configuration need to done on my end.

p4rv33n

Here is the MAN:
http://forum.mikrotik.com/viewtopic.php?t=31125

I think this will be right, or may I should use mangle!

p4rv33n

So BGP can't make Mikrotik Lan side bandwidth 87 MB with load sharing. Can PCC will able to do that without need of public ip pool of /24 or with the /8 Public IP pool. No, even PCC cannot do that. All PCC does is balance connections so that no one link is carrying all of the data for your local ne...

p4rv33n

You cannot get a single aggregated stream of (isp1+isp2+1sp3) - especially not with three different ISPs. This is simply not doable unless you use some external box (hosted somewhere else on the Internet) that has at least twice as much available bandwidth, and do some creative tunneling to it from...

p4rv33n

Hi everyone, I want load balancing with aggregation from two ISP with fail-over feature. As ISP1 has 30 mb and ISP2 has 12 mb,and near future I have another ISP3 with 45MB. I want output of those 87 mb. My network scenario is like this: as I attached the same. I am new to mikrotik as well as ISP. I ...

Search found 49 matches