Community discussions

Search found 14 matches

by calandri
Fri Jul 12, 2019 7:58 am
Forum: General
Topic: Can't update Installed SAs
Replies: 7
Views: 477

Re: Can't update Installed SAs

I solved the problem by performing the downgrade from stable v6.45.1 to long term v6.44.5
by calandri
Wed Jul 10, 2019 6:02 pm
Forum: General
Topic: Can't update Installed SAs
Replies: 7
Views: 477

Re: Can't update Installed SAs

Looks like there is still a bug with dynamic policies and addresses. I am suffering a similar issue where I have duplicate policies, one with old dynamic address, one with new dynamic address. I am already in contact with Mikrotik support. Thanks, I assumed it was a bug. I am also in contact with M...
by calandri
Wed Jul 10, 2019 10:31 am
Forum: General
Topic: Can't update Installed SAs
Replies: 7
Views: 477

Re: Can't update Installed SAs

Have you also updated the sa-dst-address in /ip ipsec policy? If yes, post both configurations, see my automatic signature below regarding anonymisation. No. I would do it willingly, but is not a editable field: https://i.ibb.co/j6yCxq2/Cattura.png P.S. I currently run v6.45.1 and I have seen in 6....
by calandri
Tue Jul 09, 2019 9:24 am
Forum: General
Topic: Can't update Installed SAs
Replies: 7
Views: 477

Can't update Installed SAs

Hi all, I've always had an IPSec tunnel between two Mikrotiks (using public IP) and everything has always worked well. Today I had to change one of two public IP designated for tunnel, I updated the configuration with the new IP in the peer, the NAT, the Route etc. The Peer is established correctly ...
by calandri
Fri Jul 22, 2016 12:00 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 41186

Re: v6.36 [current] is released!

Unfortunately in this update are not present the support UDP on OVPN tunnels  :(

Does anyone know when it will be implemented?
Thanks
by calandri
Thu Jul 07, 2016 12:35 am
Forum: General
Topic: Slow VPN tunnels (SSL, PPTP, L2TP)
Replies: 40
Views: 43446

Re: Slow VPN tunnels (SSL, PPTP, L2TP)

Can you post your VPN config output. I use pptp and l2tp and can consistently push 50M+ with no issue.  Does your server have enough bandwidth to handle the tx/rx of your speed test? How far is the server from the location and what server are you running a speed test to? Are you running the test vi...
by calandri
Wed Jul 06, 2016 11:32 am
Forum: General
Topic: Slow VPN tunnels (SSL, PPTP, L2TP)
Replies: 40
Views: 43446

Re: Slow VPN tunnels (SSL, PPTP, L2TP)

I have pretty much similar problem with vpn. Bandwidth test between mikrotiks shows great speed, but when it comes to speed between 2 devices behind each of mikrotik - speed drops drastically. Emils from support was on this problem, did nothing, made couple strange suggestions and then promised to ...
by calandri
Tue Jul 05, 2016 6:58 pm
Forum: General
Topic: Slow VPN tunnels (SSL, PPTP, L2TP)
Replies: 40
Views: 43446

Re: Slow VPN tunnels (SSL, PPTP, L2TP)

(sorry for my english but I use google translator)  :? So I do not know where it can be the cause of the problem. I have a IPSec tunnel between two mikrotik (RB3011UiAS) and the data transfer speed between the two locations is very fast, (virtually that of the rated bandwidth of the connection). Whe...
by calandri
Tue Jul 05, 2016 6:18 pm
Forum: General
Topic: Slow VPN tunnels (SSL, PPTP, L2TP)
Replies: 40
Views: 43446

Re: Slow VPN tunnels (SSL, PPTP, L2TP)

I found this comparison chart: read halfway down the page how much bandwidth is lost Unbelievable!!!!!!!!!!

http://rickfreyconsulting.com/mikrotik-vpns/

reliable?
by calandri
Fri Jul 01, 2016 12:56 pm
Forum: General
Topic: Help to routing setup through two IPsec
Replies: 3
Views: 450

Re: Help to routing setup through two IPsec

Only from IP -> IPSec pages.
by calandri
Fri Jul 01, 2016 12:50 pm
Forum: General
Topic: Help to routing setup through two IPsec
Replies: 3
Views: 450

Help to routing setup through two IPsec

Hello! I have three Mikrotik CCR1009-8G-1S-1S+ (on three different sites) having OS v6.35. I have successfully configured a IPSec tunnel from site 1 to site 2 and another IPSec tunnel from site 2 to site 3. I would avoid configuring another IPSec tunnel from site 1 to site 3. Unfortunately I can not...
by calandri
Mon Mar 07, 2016 4:53 pm
Forum: General
Topic: POE output config setup problem
Replies: 2
Views: 490

Re: POE output config setup problem

Noooooooo :(
There is a model of routerboard that support 802.3af ?
by calandri
Sat Mar 05, 2016 11:26 pm
Forum: General
Topic: Mikrotik mANT30 - Sleeve30 Kit
Replies: 2
Views: 598

Re: Mikrotik mANT30 - Sleeve30 Kit

by calandri
Sat Mar 05, 2016 11:17 pm
Forum: General
Topic: POE output config setup problem
Replies: 2
Views: 490

POE output config setup problem

Hello, I try to config POE output on my hEX PoE lite having firmware v3.29 and OS v6.34.2 and using 24V external power supply. I would like to power on two cam (one D-Link DCS-7010L connected on port 3 and other one Mobotix M12 connected on port 4). This cams support 802.3af POE protocol. On Interfa...