Community discussions

MikroTik App

Search found 42 matches

by OpenFiber
Sun Mar 17, 2024 11:08 pm
Forum: General
Topic: SMS tool improvements
Replies: 2
Views: 762

Re: SMS tool improvements

Making multipart / segmented SMS-messages visible as a single message in the inbox would indeed be a great advantage.
by OpenFiber
Sun Sep 03, 2023 7:11 pm
Forum: Wireless Networking
Topic: WiFi Wave2 tx/rx-rate shown as 0bps
Replies: 1
Views: 1702

WiFi Wave2 tx/rx-rate shown as 0bps

We've deployed a few hundred hAP ax2 devices with WiFiWave2 running RouterOS 7.10.2.

Sometimes WiFi TX/RX rates suddenly are shown as 0bps for all attached clients (see attached).

We've seen this a multiple different customers, haven't found a cause of a better solution than rebooting the device.
by OpenFiber
Wed Aug 16, 2023 3:31 pm
Forum: RouterBOARD hardware
Topic: hAP AX2 with 2.5GBASE-T or 5GBASE-T
Replies: 1
Views: 2779

hAP AX2 with 2.5GBASE-T or 5GBASE-T

As an FttH ISP we use Mikrotik hAP series routers for our endusers. We started years ago with the hAP ac, we changed to ac2 and now we ship ax2 routers. We like the ac2 and ax2 because of the small form-factor and internal antenna's (ofcourse external antenna's might work better, work are a lot more...
by OpenFiber
Wed Aug 16, 2023 3:17 pm
Forum: RouterBOARD hardware
Topic: Is there any plan for cheaper 5G devices?
Replies: 5
Views: 3778

Re: Is there any plan for cheaper 5G devices?

An affordable 5G card for upgrading existing 'MikroTik hAP ac3 LTE6 kit' devices would be nice aswel.

And what about a 'hAP ax3 5G kit'?
by OpenFiber
Fri May 05, 2023 1:15 pm
Forum: Scripting
Topic: SNR and CCQ in WiFiWave2
Replies: 5
Views: 2039

Re: SNR and CCQ in WiFiWave2

wifiwave2 is an implementation of drivers from the manufacturer of the chipset, rather than an in-house written driver (which wireless is). So there are many small details that are missing or incomplete... this is only one of them. We can only hope that over time, some things are coming back. But l...
by OpenFiber
Wed May 03, 2023 11:08 am
Forum: Scripting
Topic: SNR and CCQ in WiFiWave2
Replies: 5
Views: 2039

Re: SNR and CCQ in WiFiWave2

Just checked with RouterOS 7.9 but no difference, still no information about wireless link quality.. [.id] => *1 [interface] => wifi2 [ssid] => Studios070-XXXX [mac-address] => A0:92:08:CC:0B:B6 [uptime] => 21s [signal] => -32 [tx-rate] => 1000000 [rx-rate] => 2000000 [packets] => 17,22 [bytes] => 2...
by OpenFiber
Sun Apr 16, 2023 10:31 am
Forum: Scripting
Topic: SNR and CCQ in WiFiWave2
Replies: 5
Views: 2039

Re: SNR and CCQ in WiFiWave2

It's not that we necessarily need the SNR of TXCCQ values, but some value about connection quality would be highly appreciated.
And I'm sure that this is available since WebFig is able to visualize the performance (height and color in the clients graph).
by OpenFiber
Tue Apr 04, 2023 10:45 pm
Forum: Scripting
Topic: SNR and CCQ in WiFiWave2
Replies: 5
Views: 2039

SNR and CCQ in WiFiWave2

Our company (a FttH ISP) recently started shipping hAP ax2 (we used to ship hAP ac2). All routers are managed / provisioned from our own system, with the new ax2 we decided to implement wifiwave2 (because of significant better performance). We've adjusted all provisioning code to support both tradit...
by OpenFiber
Thu Dec 01, 2022 6:54 pm
Forum: RouterBOARD hardware
Topic: RBD52 (hAP ac2) Plastic degradation?
Replies: 3
Views: 1457

Re: RBD52 (hAP ac2) Plastic degradation?

We've over 2000 hAP AC2's in our network, we do see the plastic degradation aswel. But it seems to be related to the temperature, routers we receive back from customer who have had the router close to their heating system / radiator are definitely showing more signs of this degradation. We also see ...
by OpenFiber
Fri Aug 05, 2022 1:30 pm
Forum: RouterBOARD hardware
Topic: hAP AC2 successor (WiFi 6 + nBase-T ???)
Replies: 13
Views: 7324

Re: hAP AC2 successor (WiFi 6 + nBase-T ???)

I think our device is released (hAP AX2), having almost all features:
- WiFi6
- WPA3
- Wave2
- Better cooling

Only 'missing' nBase-T (2.5 / 5G).

See:
viewtopic.php?t=188139
by OpenFiber
Thu Jan 06, 2022 12:52 am
Forum: RouterBOARD hardware
Topic: hAP AC2 successor (WiFi 6 + nBase-T ???)
Replies: 13
Views: 7324

Re: hAP AC2 successor (WiFi 6 + nBase-T ???)

Hi LSan83, We've deployed hundreds (or even thousands) Mikrotik routers (in the beginnen hAP AC, later hAP AC2), we haven't seen any thermal issue actually. But maybe this is because most routers are often idle, because people use their internet connection primarily for browsing and streaming so onl...
by OpenFiber
Thu Jan 06, 2022 12:43 am
Forum: RouterBOARD hardware
Topic: hAP AC2 successor (WiFi 6 + nBase-T ???)
Replies: 13
Views: 7324

Re: hAP AC2 successor (WiFi 6 + nBase-T ???)

Olivier, We are a FttH network operator and ISP, our customers receive a fiber optic modem (DKT Comega series: https://dktcomega.com/product/juma-series/) which is basically a managed switch / media-converter and a Mikrotik hAP AC2 as router. The major networks in our country are beginning to offer ...
by OpenFiber
Mon Jan 03, 2022 11:01 pm
Forum: RouterBOARD hardware
Topic: hAP AC2 successor (WiFi 6 + nBase-T ???)
Replies: 13
Views: 7324

hAP AC2 successor (WiFi 6 + nBase-T ???)

We are hoping / wondering if a hAP AC2 successor is on the roadmap, with at least: - WiFi 6 support - nBase-T / 2.5G / 5G RJ45 port(s) It's not that the technology is currently unavailable or too expensive, brands like TP-Link offer WiFi 6 capable routers for < €40. Preferable in a semi robust tiny ...
by OpenFiber
Mon Nov 22, 2021 7:47 am
Forum: RouterBOARD hardware
Topic: Mikrotik switch SFP+ port issue on COLD restart
Replies: 14
Views: 11122

Re: Mikrotik switch SFP+ port issue on COLD restart

Having exactly the same issue on CRS326-24S+2Q+ (running different versions, currently 6.49) physically unplugging SFP module and reinserting also makes the link working again.
by OpenFiber
Thu Mar 25, 2021 5:07 pm
Forum: General
Topic: hAP AC3: SIM not inserted
Replies: 3
Views: 1764

Re: hAP AC3: SIM not inserted

Hi guys thanks for the advices!

It turned out to be a physical issue with the SIM-card connector pins, not all pins actually had contact with the inserted SIM-card.
We've bended the problematic pins and it instantly worked!

Thanks again!
by OpenFiber
Wed Mar 24, 2021 10:24 am
Forum: General
Topic: hAP AC3: SIM not inserted
Replies: 3
Views: 1764

hAP AC3: SIM not inserted

Just tried to configure a brand new hAP AC3 LTE to function as a LTE / 4G router. But the hAP AC3 keeps saying "SIM not inserted". The SIM works perfectly in an iPhone and has worked in another hAP AC3 LTE before. The device is running 6.48.1 (both packages and routerboard firmware) Also t...
by OpenFiber
Sun Aug 30, 2020 11:58 am
Forum: General
Topic: 6-to-4 tunnel broken in 6.47
Replies: 1
Views: 850

Re: 6-to-4 tunnel broken in 6.47

Upgraded to 6.47.2 (RouterOS and firmware) now working fine!
by OpenFiber
Mon Aug 17, 2020 4:02 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 427
Views: 120553

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

One of the problem ports is my switch uplink port... We've uplinked the device using a QSFP+ (40G) port, this port has never given any issue. We can confirm that the issue seems to be related to either high utilization or the sum of data (packets / bytes, not sure) transferred. We've not done any f...
by OpenFiber
Sat Aug 08, 2020 12:10 pm
Forum: General
Topic: hAP ac³ USB Port not working?
Replies: 2
Views: 1437

Re: hAP ac² USB Port not working?

Just took the time to test it on a hAP ac² with the same software, since this device is quite similar in architecture. But it also works on a hAP ac² so it's not something architecture (ARM) related. USB port working on hAP ac² https://i.ibb.co/4f5ZY79/gps-hap-ac2.png As far as I can analyse the pro...
by OpenFiber
Thu Aug 06, 2020 2:24 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 427
Views: 120553

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Still experiencing this issues.. logged the issue 'SUP-23910', no response yet.
Received a response, we were asked to return the affected switches to Mikrotik for investigation....
First switch is currently with DHL on its way to Mikrotik (via the distributor in Czech Republic).
by OpenFiber
Wed Aug 05, 2020 9:28 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 427
Views: 120553

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Still experiencing this issues.. logged the issue 'SUP-23910', no response yet.
by OpenFiber
Sun Jul 26, 2020 10:41 pm
Forum: General
Topic: hAP ac³ USB Port not working?
Replies: 2
Views: 1437

hAP ac³ USB Port not working?

Hi guys, Trying to get a USB GPS / Glonass device working on a Mikrotik hAP ac³, the device is installed in a mobile home / RV and the idea is to create a script that periodically reads out the coordinates and when 'significant' movement is detected pushes the new coordinates to a server using the L...
by OpenFiber
Sun Jul 26, 2020 4:17 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 427
Views: 120553

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

After days of continuous operation of a CRS354-48G-4S+2Q+ with v6.48beta12, we just experienced the same problem on another port-group (17-24). Rebooting the switch 'solves' the problem, wondering if the root-cause of the problem is already found? This problem basiscly makes this switch unusable for...
by OpenFiber
Sun Jul 12, 2020 10:57 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 427
Views: 120553

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

24 hours without the problem. Have to admit that we changed two things: - Updated software and firmware to 6.48beta12 - Moved devices to higher ports, leaving only 1 device connected to the 'affected' ports Will move the devices back from the higher port numbers to the initial ones (in the 1-8 range...
by OpenFiber
Sat Jul 11, 2020 9:25 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 427
Views: 120553

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Experiencing the same problem on two CRS354-48G-4S+2Q+ devices, tried multiple routeros / firmware versions (6.46.4, 6.46.5, 6.46.6, 6.47 and 6.47.1), now trying 6.48beta12.. disabling -> enabling (individual) ports does not seem to resolve the issue, rebooting the whole device does resolve the issu...
by OpenFiber
Sun Jun 07, 2020 11:29 am
Forum: General
Topic: 6-to-4 tunnel broken in 6.47
Replies: 1
Views: 850

6-to-4 tunnel broken in 6.47

Experimented with 6.47 (upgraded from 6.46.6) on a Mikrotik CCR1072, after the upgrade the 6-to-4 tunnels stopped working. TX on both sides but no RX... The "Tx/Rx Drops" counter increases (but is lower than the "Tx/Rx Packet" value, although the is no traffic coming trough). The...
by OpenFiber
Thu Aug 24, 2017 4:40 pm
Forum: General
Topic: Feature request: MPLS IPv6
Replies: 17
Views: 9545

Re: Feature request: MPLS IPv6

bump..

I think this is a feature which now a days should be available in self respecting routers :-)
by OpenFiber
Mon Jun 19, 2017 9:53 pm
Forum: RouterBOARD hardware
Topic: hAP AC & TL-POE150S
Replies: 1
Views: 787

Re: hAP AC & TL-POE150S

Hi we power hundreds of hAP AC's with PoE using ZTEcom PoE 802.11at midspan's (rack mountable 24 port injectors).
I'm not sure if this device is actually PoE compliant (active) or passive, this might be the problem...
Also done some testing with UBNT PoE injectors.
by OpenFiber
Tue Jan 24, 2017 3:13 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

@macgaiver, interesting finding / comment (regarding STP relation)!
I do have RSTP enabled on a bridge interface but this is not / does not contain the PPPoE interface.
by OpenFiber
Tue Jan 24, 2017 3:12 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Hi nescafe2002, I did these topic updates because of the fact that PPPoE became broken (in 6.38), fixed (in 6.39rc), broken (in a newer 6.39rc) and fixed again (in another 6.39rc). So I thought it might help to have the next 'stable' release not having this issue.. I by the way just did a downgrade ...
by OpenFiber
Tue Jan 24, 2017 2:54 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Upgraded to 6.39rc17, and (as expected based on the changelog) it still works fine :) What's new in 6.39rc17 (2017-Jan-23 16:30): *) capsman - added save-channel option to speed up frequency selection on CAPsMAN restart; *) capsman - added support for static virtual interfaces on CAP; *) dude - (cha...
by OpenFiber
Sat Jan 21, 2017 9:50 am
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Just upgraded to 6.39rc15 and still working fine!
by OpenFiber
Wed Jan 18, 2017 7:11 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Just upgraded to 6.39rc13 and still working fine!

Haven't tried 6.38.1....
by OpenFiber
Fri Jan 13, 2017 11:10 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Hi I just upgraded to 6.39rc12 which includes some PPP(oE) related fixes.

*) ppp - fixed rare kernel failure on PPP client connection;
*) pppoe - make default keepalive 10s for PPPoE clients;

After this update the PPPoE instant works (again)...
by OpenFiber
Tue Jan 10, 2017 10:38 am
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Today I did the upgrade to 6.39rc7 but again PPPoE client seems broken?
Another thing I noticed is that a PPTP session just runs fine, so its not PPP in general but more like PPPoE specific?

After a downgrade to 6.37.3 it works fine (instant).
by OpenFiber
Mon Jan 02, 2017 5:41 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

Re: PPPoE (client) stopped working after 6.38 upgrade

Probably good to know is that I used PPPoE over a tagged VLAN interface (for a VDSL connection in the Netherlands)
by OpenFiber
Mon Jan 02, 2017 5:39 pm
Forum: General
Topic: PPPoE (client) stopped working after 6.38 upgrade
Replies: 11
Views: 6118

PPPoE (client) stopped working after 6.38 upgrade

Hi guys, Just updated the CCR at my house (one of our testing sites :D) but since this upgrade the PPPoE connection (one of the two uplinks to internet) is broken. The logs show (every 20 sec): pppoe1: initializing... pppoe1: connecting... pppoe1: terminating... - failed to authenticate our selves t...
by OpenFiber
Thu Dec 22, 2016 4:32 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM MPLS Support
Replies: 56
Views: 25771

Re: CRS317-1G-16S+RM MPLS Support

Dear all, The answer is (now) clear (enough), the device won't support MPLS Label Switching, and this is what I was looking for... So this new CRS will not be the solution for us, can we expect a new Cloud Core Router device with more than 8 SFP+ ports (or a CRS with label switching support via ASIC...
by OpenFiber
Mon Dec 19, 2016 2:14 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM MPLS Support
Replies: 56
Views: 25771

CRS317-1G-16S+RM MPLS Support

Dear Mikrotik, We became very enthousiast when reading the Newsletter #74, since it included the announcement of the CRS317-1G-16S+RM. We currently use multiple CCR1072's in the core of our network to 'aggregate' all the sites using 10Gbit links, all sites (buildings) are connected using CCR1016-12S...
by OpenFiber
Fri Oct 07, 2016 12:04 am
Forum: RouterBOARD hardware
Topic: CRS226-24S-2S+RM ?
Replies: 3
Views: 1790

CRS226-24S-2S+RM ?

I was wondering if we could expect a Mikrotik (Cloud Router) Switch with 'many' SFP ports, the type number above is (as far a I know :-P) non-existing but should have: - 24 SFP ports - 2 SFP+ ports Also wondering if a switch with multiple (for example 8 like to CCR1072 or even more) SFP+ ports is on...
by OpenFiber
Thu Mar 10, 2016 1:36 am
Forum: RouterBOARD hardware
Topic: Mikrotik VDSL / DSL Modem?
Replies: 381
Views: 198473

Re: Mikrotik VDSL / DSL Modem?

+1 for VDSL2 modem option

The SFP option looks very nice (combined with a RB2011 for example).

We currently use RB2011 with a Draytek 130
by OpenFiber
Thu Mar 10, 2016 1:35 am
Forum: RouterBOARD hardware
Topic: CRS version of CCR1072-1G-8S+
Replies: 7
Views: 2991

Re: CRS version of CCR1072-1G-8S+

+1 definitely

also a Cloud Router Switch 226-24S-2S+RM would be nice :-)