Community discussions

Search found 36 matches

by blackbox100
Fri Mar 08, 2019 10:06 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 9858

Re: MUM Europe 2019: new hardware

- mUPS pro: 24V/48V battery support, 24V/48V PoE out support, Would be nice if it could send notifications, since after they removed the voltage sensor on the crs326 switches, we don't get notifications from the original mUps. i have around 300 x CRS326/CRS226 switches in my network, and while the C...
by blackbox100
Mon Dec 17, 2018 8:47 am
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM as a "Core" switch
Replies: 12
Views: 1179

Re: CRS317-1G-16S+RM as a "Core" switch

Thats weird, because I have tested it on 8 different crs326 all running beta20 and it works perfect, traffic shaping also does work, however the rate settings are still weird. and a crs326 if I want to set a user to 250/250M speed, I have to set ingress rate at 400M and Egress Rate at 250M On a CRS2...
by blackbox100
Sat Dec 15, 2018 6:34 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM as a "Core" switch
Replies: 12
Views: 1179

Re: CRS317-1G-16S+RM as a "Core" switch

I get around 960mbit up and Down from the crs326 with 6.44beta20 so no speed issues anymore
by blackbox100
Fri Dec 14, 2018 10:56 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM as a "Core" switch
Replies: 12
Views: 1179

Re: CRS317-1G-16S+RM as a "Core" switch

Cool
by blackbox100
Fri Dec 14, 2018 9:06 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM as a "Core" switch
Replies: 12
Views: 1179

Re: CRS317-1G-16S+RM as a "Core" switch

I have 10-12 crs317 set up as core switches for running around 280 crs226 and crs326 switches in my isp Network They have been rock solid since the first day we implemented them (when they became available) They are all connected with 10 gbic modules to the crs226/326 and performs very well as core ...
by blackbox100
Thu Sep 27, 2018 2:18 pm
Forum: RouterBOARD hardware
Topic: CRS326 6.43.2 Reset Mac-adress results in kernel failure
Replies: 2
Views: 338

CRS326 6.43.2 Reset Mac-adress results in kernel failure

Hi all on 6.43.2 and the previous 6.43.1 and 6.44beta9 if you try to reset the Mac-adress on a interface, the switch hangs and becomes unresponsive, after a reboot, the log shows kernel failure in previous boot It works perfectly in 6.43.rc.12 Can anyone verify this fault? Sincerely Carsten Larsen
by blackbox100
Wed May 16, 2018 1:15 pm
Forum: The Dude
Topic: Telegram when syslog receives "probably a loop"
Replies: 0
Views: 411

Telegram when syslog receives "probably a loop"

Hi all first of all, I will say that the dude is correctly setup up with telegram, so if I have a switch that goes down, it will telegram the switch name, and status etc. etc im trying to get the dude to send a telegram message when the syslog sees the text "probably a loop" I occasionally see these...
by blackbox100
Thu Apr 26, 2018 11:34 pm
Forum: General
Topic: CRS326 port isolation
Replies: 3
Views: 986

Re: CRS326 port isolation

And i can confirm that this works

Thanks alot
by blackbox100
Wed Apr 25, 2018 1:16 pm
Forum: General
Topic: CRS326 port isolation
Replies: 3
Views: 986

Re: CRS326 port isolation

+1

I would also like to know this

I have 30x crs326 that for now is useless

Sincerely

Carsten Larsen
by blackbox100
Sat Feb 03, 2018 8:50 pm
Forum: General
Topic: Facebook Photos are not loading
Replies: 1
Views: 264

Re: Facebook Photos are not loading

I had the same issue, and disabled “allow Remote requests” under ip - dns

That fixed it for me

Regards
Carsten Larsen
by blackbox100
Fri Dec 22, 2017 10:46 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 74334

Re: v6.41 [current]

still problems with ingress rate limit on crs326, when set to 135m ingress I get around 100m on speedtest.net, on the 200 pieces of crs226 ingress rate works, when set to 135m I get 130m on speedtest.net but it has improved since 6.40rc66 where when set to 135m I only got around 30m on speedtest.net...
by blackbox100
Fri Oct 20, 2017 10:13 pm
Forum: SwOS
Topic: CRS317 Unknown Ports in Switch VLAN
Replies: 4
Views: 1321

Re: CRS317 Unknown Ports in Switch VLAN

Figured it out

You have to do it under bridge menu, i can post a few screenshots if you want
by blackbox100
Tue Oct 10, 2017 1:51 pm
Forum: RouterBOARD hardware
Topic: CrS326 QOS-SHAPER missing
Replies: 0
Views: 351

CrS326 QOS-SHAPER missing

Hi all Up until now I have used CRS226 at about 100 locations, but now I cannot get more of them, and have bought a few crs326 hoping that I could use them forward, but they are missing a key feature for me. Its the Qos Shaper menu, where you can set up and download settings pr port, and I can't see...
by blackbox100
Sun Sep 24, 2017 7:27 pm
Forum: The Dude
Topic: RB1100AHx4 Dude Edition no USB port???
Replies: 4
Views: 1338

Re: RB1100AHx4 Dude Edition no USB port???

yes I know I should have checked, thats my fault

is there anyway that I can have the rb1000dude sending sms notifications through another MikroTik that has a USB port with a 3/4G modem connected, for instance my ccr1009?

sincerely

Carsten Larsen
by blackbox100
Thu Sep 21, 2017 2:03 am
Forum: The Dude
Topic: RB1100AHx4 Dude Edition no USB port???
Replies: 4
Views: 1338

RB1100AHx4 Dude Edition no USB port???

Hi all have just received my RB1100AHx4 Dude Edition only to find out that it doesn't have a USB port Why on earth would mikrotik launch a specific dude edition without the possibility to add a 3G/4G dongle to the USB port I currently run the dude on a ccr1009 and rely on the 3G connection to send m...
by blackbox100
Mon Sep 18, 2017 4:50 pm
Forum: SwOS
Topic: CRS317 Unknown Ports in Switch VLAN
Replies: 4
Views: 1321

CRS317 Unknown Ports in Switch VLAN

Hi all

just got my CRS317, and was trying to add VLAN10 under Switch - VLAN like I do on all my other CRS Switches, but all the ports are shown as Unknown?

any ideas of what Is wrong, see attached screenshot
by blackbox100
Wed Aug 30, 2017 5:56 pm
Forum: SwOS
Topic: CRS326-24G-2S+RM Bandwidth Limitation?
Replies: 9
Views: 3054

Re: CRS326-24G-2S+RM Bandwidth Limitation?

they say that it will come in future software versions
by blackbox100
Fri Aug 25, 2017 10:27 am
Forum: RouterBOARD hardware
Topic: CRS326 missing menu in winbox, but appears in web fig
Replies: 3
Views: 721

Re: CRS326 missing menu in winbox, but appears in web fig

got this reply Hello, At the moment, CRS3xx Switch Rule table can limit Rate in ingress only. /interface ethernet switch rule add switch=switch1 ports=ether2 rate=200M If setup allows, to achieve Rate limiting in opposite direction we recommend to add Rate limit rules on uplink port with additional ...
by blackbox100
Fri Aug 18, 2017 7:00 pm
Forum: RouterBOARD hardware
Topic: CRS326 missing menu in winbox, but appears in web fig
Replies: 3
Views: 721

CRS326 missing menu in winbox, but appears in web fig

Hi all Have a couple of CRS326 (6.40.1) that I bought to replace my CRS226 But the feature I use the most in the CRS226 are the Switch Qos Shaper menu, and that doesn't appear on the CRS326 in winbox 3.11 But today I noticed that if I use a browser to access the web fig menu it has 2 switch menu´s, ...
by blackbox100
Thu Jun 22, 2017 2:17 pm
Forum: RouterBOARD hardware
Topic: CRS326 Switch Qos shaper is missing
Replies: 11
Views: 1367

Re: CRS326 Switch Qos shaper is missing

I hope that because otherwise its useless until the crs328 comes out that hopefully Will have this feature
by blackbox100
Thu Jun 22, 2017 11:12 am
Forum: RouterBOARD hardware
Topic: CRS326 Switch Qos shaper is missing
Replies: 11
Views: 1367

Re: CRS326 Switch Qos shaper is missing

no not to my knowledge, it works perfectly, I can give a user on ether1 200/200mbit and a user on ether2 125/125mbit if I want, without any increase in CPU usage
by blackbox100
Wed Jun 21, 2017 11:05 pm
Forum: RouterBOARD hardware
Topic: switch to use ..?
Replies: 2
Views: 365

Re: switch to use ..?

Try disable the lcd interface, then the cpu should go down, it does on the crs226
by blackbox100
Wed Jun 21, 2017 8:24 pm
Forum: RouterBOARD hardware
Topic: CRS326 Switch Qos shaper is missing
Replies: 11
Views: 1367

CRS326 Switch Qos shaper is missing

Hi all, have just received four of the new CRS326-24G-2S-RM switche with dualboot RouterOs up until now I have been using around 100 pieces of CRS226-24G-2S+ in my network, but that model has been discontinued now, and replaced by the CRS326 One of the features I use in every of my CRS226 is the Swi...
by blackbox100
Wed Jun 21, 2017 4:52 pm
Forum: RouterBOARD hardware
Topic: fake/faulty SPF+WDM Modules
Replies: 2
Views: 481

fake/faulty SPF+WDM Modules

Hi all, I have a very strange problem Have recently bought 4 sets of S+2332LC10D Wdm modules, from Inter Projekt Poland I have used these modules in many years without problems, and have currently 20 x 10GB Links running with these module sets But the last 4 sets that I have bought, doesn’t work, wh...
by blackbox100
Mon Jun 19, 2017 10:22 pm
Forum: Announcements
Topic: Newsletter 76
Replies: 50
Views: 14390

Re: Newsletter 76

me two, I´m eagerly awaiting the crs3228 and the crs317
by blackbox100
Sat Mar 18, 2017 1:12 am
Forum: SwOS
Topic: CRS326-24G-2S+RM Bandwidth Limitation?
Replies: 9
Views: 3054

Re: CRS326-24G-2S+RM Bandwidth Limitation?

another question

will future SWos versions give the ability to remote control the switch either from API, telnet or other remote management other than the webgui?

Sincerely

Carsten Larsen
by blackbox100
Fri Mar 10, 2017 5:36 pm
Forum: SwOS
Topic: CRS326-24G-2S+RM Bandwidth Limitation?
Replies: 9
Views: 3054

Re: CRS326-24G-2S+RM Bandwidth Limitation?

ok, thanks

have a nice weekend
by blackbox100
Fri Mar 10, 2017 1:17 am
Forum: SwOS
Topic: CRS326-24G-2S+RM Bandwidth Limitation?
Replies: 9
Views: 3054

CRS326-24G-2S+RM Bandwidth Limitation?

Hi all just received this switch, but can´t seem to find the menu where I can set the bandwidth limitation? The description on MT site, clearly state that it should be possible "It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply ...
by blackbox100
Fri Jan 27, 2017 9:40 am
Forum: Announcements
Topic: Newsletter 75, January 2017
Replies: 55
Views: 16060

Re: Newsletter 75, January 2017

CSS has a different OS and does not support LCD. It only has SwOS on it, so there are no optional routing capabilities like in the CRS.
I only need it for switching, and dont ned the lcd, what about 48 ports?
by blackbox100
Fri Jan 27, 2017 2:59 am
Forum: Announcements
Topic: Newsletter 75, January 2017
Replies: 55
Views: 16060

Re: Newsletter 75, January 2017

I also have about 10 of these CRS125-24G-1S-RM and they are configured exactly as the crs226, only as switch, and they use sround 8-9% cpu, thats why i think the 226 woyld benefit from the same processor as the crs125 The new CRS3xx series will have a much more poweful 800MHz Marvell CPU, even bett...
by blackbox100
Thu Jan 26, 2017 12:16 pm
Forum: Announcements
Topic: Newsletter 75, January 2017
Replies: 55
Views: 16060

Re: Newsletter 75, January 2017

...crs226, only as switch, and they use sround 8-9% cpu In my tests, these percents are for lcd graphs. If you disable LCD - you'll immediately recover that extra CPU cycles. Strange to know that CPU is so weak (or maybe code is so bad) that even cycled display simple statistics results in such a b...
by blackbox100
Thu Jan 26, 2017 10:17 am
Forum: Announcements
Topic: Newsletter 75, January 2017
Replies: 55
Views: 16060

Re: Newsletter 75, January 2017

No sorry, i only use at as a switch, no routing functions enabled, we have tried to get an explanation from you many times, anf have sent config files, but mikrotik never replied us All the routing are done in our 4 CCR1036-8G-2S+EM I also have about 10 of these CRS125-24G-1S-RM and they are configu...
by blackbox100
Thu Jan 26, 2017 2:36 am
Forum: Announcements
Topic: Newsletter 75, January 2017
Replies: 55
Views: 16060

Re: Newsletter 75, January 2017

I'm so excited about the coming CRS326-24G-2S+! Would you mind to share us some specs? I hope for a stronger CPU and an all POE version. [/list] me too, I was hoping for at new CRS226 with at least a 600mhz processor, because the 400Mhz processor is using 50% cpu now, and sometimes it hits 100% and...
by blackbox100
Tue Nov 29, 2016 12:29 am
Forum: General
Topic: Why my Mikrotik Router has same MAC ADDRESS
Replies: 3
Views: 1368

Re: Why my Mikrotik Router has same MAC ADDRESS

is it possible that you have used system backup tool to copy config from one to another, because, when you do that it also clones the Mac adresses, under the ethernet interface, just hit the "reset Mac-adress" button and that should clear it