Community discussions

Search found 67 matches

by Florian
Fri Sep 13, 2019 7:26 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 194
Views: 35899

Re: RouterOS v7.0beta1 (ARM)

Soooo, we can't disable undividual package with V7 ?

Because if not, I hope the ipv6 / duid bug, where it's needed to disable the dhcp package before changing the mac adress (viewtopic.php?f=2&t=120801&p=699787#p699787) is fixed.
by Florian
Wed Aug 21, 2019 5:18 pm
Forum: RouterBOARD hardware
Topic: CCR1036 memory upgrade question
Replies: 29
Views: 4672

Re: CCR1036 memory upgrade question

How can i find out if i have a new(no slots) or an old(slotted) version? Specifically of the CCR1036-12G-2S+ @xt22 Do you have a picture of the new revision board open? I believe the "new" revision are the ones with 2 psu. The "old" model have only 1 psu (which at one point were dying right and lef...
by Florian
Tue Aug 20, 2019 11:35 pm
Forum: General
Topic: Question about CCR and inter-vlan routing performances
Replies: 7
Views: 841

Re: Question about CCR and inter-vlan routing performances

Well, with only 2 interfaces used on my ccr right now, the 9 cores are used... My guess is, for the the os, it won't matter, it will still spread the connections / session across cores. I could already test this, in 1gb. But if it doesn't, it would mean that router on a stick is non doable performan...
by Florian
Tue Aug 20, 2019 10:31 pm
Forum: General
Topic: Question about CCR and inter-vlan routing performances
Replies: 7
Views: 841

Re: Question about CCR and inter-vlan routing performances

Thx again :)

About the 10gb part, I don't find the post anymore but someone tested the 10gb ccr1009, and when fast track /path was active it was good. Or good enough anyway. I have a fes firewall ans nat rules, but not hundreds... And if vlan interface can do fastpath too, I'll be alright I guess.
by Florian
Tue Aug 20, 2019 9:30 pm
Forum: General
Topic: Question about CCR and inter-vlan routing performances
Replies: 7
Views: 841

Re: Question about CCR and inter-vlan routing performances

Thx you for this answer : ) I read a lot about bridge, but it seems that if you mess it up you can lose a lot of performances. With vlan interfaces directly attached to a ether interface, I guess that fastpath and all that is still working ? I read some situation where as soon as they enable vlan in...
by Florian
Tue Aug 20, 2019 5:52 pm
Forum: General
Topic: Question about CCR and inter-vlan routing performances
Replies: 7
Views: 841

Question about CCR and inter-vlan routing performances

Hello, On CCR routers, let say CCR 1009 without switch chip, if I create 2 vlans, and assign them to physical interfaces (vlan2=>ether2 ; vlan3=>ether3), and using the vlans interfaces for my firewall rules, routing, nat, etc, will the speed be the same that if I'm using directly the physical interf...
by Florian
Sun Aug 18, 2019 3:04 pm
Forum: RouterBOARD hardware
Topic: 2*10gb ports for a CCR ?
Replies: 10
Views: 1388

Re: 2*10gb ports for a CCR ?

Hello again. I'm thinking more and more about this since in France the isp Free is pushing 10gb (well, 8) in some areas. What I don't understand about router on a stick is the bandwith impact. Port are full duplex nowadays, so, If i launch a download and can get 10gb/s... wan-vlan=>10gb router port ...
by Florian
Sun Jul 14, 2019 9:07 pm
Forum: General
Topic: No layer7-protocol on ipv6?
Replies: 1
Views: 459

Re: No layer7-protocol on ipv6?

i have to up this.

It's very useful to to conditional DNS...
by Florian
Fri Jul 05, 2019 11:32 pm
Forum: General
Topic: [Feature Request] IPv6 Fasttrack
Replies: 11
Views: 2180

Re: [Feature Request] IPv6 Fasttrack

+1

There is not NAT situation anymore with IPv6 (well.... mostly), but a boost in perf could be nice, with IPv6 being the futur and more and more used.
by Florian
Sat Jun 15, 2019 7:29 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71316

Re: v6.45beta [testing] is released!

Please implement "advertise-local-dns" option in IPv6 ND that makes router advertise the local address (same as gateway) as DNS server, instead of the IPv6 DNS servers configured in /ip dns. (to make IPv6 systems use the local DNS resolver instead of going directly to the ISP DNS servers) This is n...
by Florian
Thu Apr 18, 2019 3:09 pm
Forum: General
Topic: Dstnat in output chain?
Replies: 14
Views: 3318

Re: Dstnat in output chain?

If this was added, I'd also use it for per-domain DNS forwarding in few places, because it would help with at least some shortcomings of current L7 hack (bypassing cache and not working for router itself). But I really hope to live to see proper support for that in RouterOS DNS resolver. +1, for th...
by Florian
Sat Dec 29, 2018 3:58 pm
Forum: RouterBOARD hardware
Topic: 2*10gb ports for a CCR ?
Replies: 10
Views: 1388

Re: 2*10gb ports for a CCR ?

Router on a stick works well and many SoHo routers works by this way internally. I also don't know how a residential customer could saturate 10GbE internet link. Saturating 1gb is pretty easy in my case. Now, 10gb, I don't know, it would depend of the servers I'm using, the peering quality of my is...
by Florian
Thu Dec 27, 2018 10:30 am
Forum: RouterBOARD hardware
Topic: 2*10gb ports for a CCR ?
Replies: 10
Views: 1388

Re: 2*10gb ports for a CCR ?

Switch: Port 1 = WAN - PVID 100 (so access port on vlan 100) Port 2 = LAN - PVID 200 (access port on vlan 200) Port 3 or 4 = Router, Trunk port with tagged 100 and 200 VLAN Making sure bridge vlan filter is on to ensure adherence to the tags and PVID. On Router you have 1 physical interface, you cr...
by Florian
Wed Dec 26, 2018 4:51 pm
Forum: RouterBOARD hardware
Topic: 2*10gb ports for a CCR ?
Replies: 10
Views: 1388

Re: 2*10gb ports for a CCR ?

He is suggesting to make an "router on a stick". With the use of VLANs, and a smart switch, You can use the same 10Gb port to WAN and LAN. But, with this setup, you can't use the full 10Gb - since we would have two streams using the same port. With residential usage I don't think it would be a prob...
by Florian
Wed Dec 26, 2018 4:13 pm
Forum: RouterBOARD hardware
Topic: 2*10gb ports for a CCR ?
Replies: 10
Views: 1388

Re: 2*10gb ports for a CCR ?

You could use a cheap switch like Mikrotik's little 4 port SFP+ switch for WAN, LAN, Router So WAN comes into switch, switch goes into router, router back to switch for output via LAN port. Or you could upgrade to the likes of CCR1036-8G-2S+ but thats quite a bit expensive. But in this case, I stil...
by Florian
Wed Dec 26, 2018 10:31 am
Forum: RouterBOARD hardware
Topic: 2*10gb ports for a CCR ?
Replies: 10
Views: 1388

2*10gb ports for a CCR ?

Hello, Some ISPs are looking at testing 10gb ftth in 2019/2020. Right now, I've a 1gb connex., which is working great with my CCR1009-7G-1C-PC. But in the futur, I will need a 10gb port. Even 2 (1 wan, 1 lan). So, the CCR1009-7G-1C-1S+PC looked good with the sfp+ cage, until I notice that It's the o...
by Florian
Sun Nov 25, 2018 2:55 pm
Forum: General
Topic: DHCPv6 DUID change - bug?
Replies: 11
Views: 2402

Re: DHCPv6 DUID change - bug?

Yeah, it's pretty bad... It's strange, some problems they fix in a few RC releases, and other are not fixed for years... In my mind, I really hope it's because RoS6 is a "mess" to work with, and V7 will be more flexible and a lot of bugs will be fixed by it... But I'm 35, I wonder If I'll live to se...
by Florian
Fri Nov 09, 2018 10:45 pm
Forum: General
Topic: DHCPv6 DUID change - bug?
Replies: 11
Views: 2402

Re: DHCPv6 DUID change - bug?

Alright, so I did a reset configuration, then change the ether1 mac address, the create a dhcp6 client, and still, it's the original mac from ether1 who is used for the duid. The factory reset isn't working anymore ? Thx in advance. Edit : ok, I had to disable dhcp and IPv6 package, reboot, reset co...
by Florian
Sat Nov 03, 2018 11:25 am
Forum: General
Topic: DHCPv6 DUID change - bug?
Replies: 11
Views: 2402

Re: DHCPv6 DUID change - bug?

Can we at least have the option to reset the duid, from a chosen eth interface, without having to factory reset the whole thing, please ?
by Florian
Wed Oct 31, 2018 6:38 pm
Forum: General
Topic: DHCPv6 DUID change - bug?
Replies: 11
Views: 2402

Re: DHCPv6 DUID change - bug?

Any news on this ? SFR, a french ISP, need a specific DUID. I don't want to factory reset my router, then change the mac adress (of eth1 since RoS seems to use this one event if it's not connected...), and then enable ipv6, only for that... A simple duid variable in the dhcpv6 client would do the tr...
by Florian
Wed Aug 15, 2018 11:08 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113431

Re: v6.43rc [release candidate] is released!

Hello,

Funny thing after Version 6.43rc56 , my DHCPv6 client is showing in red in winbox, even though everything is working, and my ipv6 connectivity is ok. Still after after re-creating it from scratch... Not a big deal, but...
ipv6.JPG
by Florian
Fri Jun 01, 2018 2:50 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154910

Re: RouterOS v7.0 beta1 - when?

To be fair, some of "wait for v7" problems were in fact corrected in v6.XX (like more options for DHCPv6 Server) My theory is that they didn't plan to push v6 this far, and they realised that SOME of v7 features could be in fact in v6, so this "helped" delay V7. Now, Mikrotik is not a small fish, bu...
by Florian
Sun May 27, 2018 2:47 pm
Forum: General
Topic: Feature Request / Improvement : Fastpath/track and bridges
Replies: 0
Views: 353

Feature Request / Improvement : Fastpath/track and bridges

Hi. It seems release after release you improve on that, but, is there any chance that fastpath/track on bridge can be improved ? And by that I mean working even if we have rules in /interface bridge filter ? In my case, I have just 2 rules here, to change priority on dhcp request (my isp require tha...
by Florian
Sat May 26, 2018 8:22 pm
Forum: General
Topic: IPv6 Neighbor List : Status : failed
Replies: 0
Views: 460

IPv6 Neighbor List : Status : failed

Hi there. I've a strange problem that I don't really understand. My IPv6 setup works for a few minutes, and then, at the next ND I suppose, the physical interface with the ipv6 connection goes to "failed" in the Neighbor List. If I disable/enable , it's working again for a few minutes, and then boom...
by Florian
Mon Feb 12, 2018 8:21 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97306

Re: v6.42rc [release candidate] is released!

So, if we are under r20 and don't want to "clean flash", we're screwed and can't upgrade, right ?
by Florian
Tue Dec 19, 2017 2:39 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests

I guess so, but, It's to show the devs my (or "ours") interest in this, if they can find a way to implement it, some people would be very happy.
by Florian
Tue Dec 19, 2017 2:23 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests

I know it's not ready yet, but +1 on Wireguard. You know how everyone's always saying "we want UDP support in OpenVPN" and "we want LZO"? And MikroTik say that their OVPN implementation is really nasty code that's hard to work on? How about instead we look to the future: WireGuard https://www.wiregu...
by Florian
Sat Apr 22, 2017 2:03 pm
Forum: General
Topic: Feature request - DNSCrypt support...
Replies: 157
Views: 45586

Re: Feature request - DNSCrypt support...

+1.
by Florian
Wed Mar 08, 2017 10:42 pm
Forum: General
Topic: DNS server stop working from time to time
Replies: 6
Views: 1911

Re: DNS server stop working from time to time

I do. But I found the "true" problem in my case. I mailed them this : (sorry for my bad english) "Additional info : In fact, it seems that Mikrotik sometime doesn't try all the dns servers in the list, but only the last one. And if the last one is down, then, it doesn't try the first one, so DNS fai...
by Florian
Tue Mar 07, 2017 10:05 pm
Forum: General
Topic: DNS server stop working from time to time
Replies: 6
Views: 1911

Re: DNS server stop working from time to time

Yeah, I did it yesterday :) Thx :)
by Florian
Mon Mar 06, 2017 10:58 am
Forum: General
Topic: DNS server stop working from time to time
Replies: 6
Views: 1911

Re: DNS server stop working from time to time

Hi.

Ok, what is the "official" way to submit a bug report ? I can't seem to find it, sorry :/

Thx.
by Florian
Mon Mar 06, 2017 10:09 am
Forum: General
Topic: DNS server stop working from time to time
Replies: 6
Views: 1911

DNS server stop working from time to time

Hello, I've a strange problem with the Mikrotik DNS server of my CCR 1009. The setup is pretty classic : [admin@MikroTik] > /ip dns print servers: 80.67.169.12,8.8.8.8 dynamic-servers: allow-remote-requests: yes max-udp-packet-size: 4096 query-server-timeout: 2s query-total-timeout: 4s max-concurren...
by Florian
Sat Jan 21, 2017 8:01 am
Forum: General
Topic: Feature request: DHCPv6-client Options
Replies: 1
Views: 643

Re: Feature request: DHCPv6-client Options

Hi,

They told us before that all that will be included in RouterOS v7. Now, when RouterOS v7 will be available, it's another question :)
by Florian
Thu Nov 17, 2016 12:47 pm
Forum: General
Topic: Feature request for v7.x
Replies: 269
Views: 63650

Re: Feature request for v7.x

Hi ! I would love a equivalent of "llprio" found in OpenBSD6. "In ifconfig, add the "llprio" parameter to set the priority of packets that do not go through pf." I believe it would be a way to interact with raw sockets packets. (In my own case, I need to put priority on DHCP packets, which can't be ...
by Florian
Sat Nov 05, 2016 6:03 pm
Forum: General
Topic: DHCPv6 PD not working
Replies: 11
Views: 3027

Re: DHCPv6 PD not working

If I remember correctly, they said it will be in RouterOS v7.
by Florian
Tue May 03, 2016 4:41 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : DSCP on DHCP packets

I hope the DHCP will use "ip" and not raw sockets in V7... or that the v7 will be able to work with raw socket... "The real need is to be able to mark outgoing DHCP client packets with a DSCP value. The reason stays the same, the isp Orange need it to answer DHCP requests. And then, since Orange use...
by Florian
Thu Apr 14, 2016 1:45 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105743

Re: v6.35rc [release candidate] is released, new wireless package!

regarding options for DHCPv6-client, DHCP-PD client (and also DHCP--PD server) as it currently stands - options will be available only with RouterOS 7.x release due to technical limitations for backporting the feature.

Thx for the update :)

The famous RouterOS7.x.... I'll have to wait I guess :)
by Florian
Tue Apr 12, 2016 2:33 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105743

Re: v6.35rc [release candidate] is released, new wireless package!

Version 6.35rc49 has been released. Changes since previous version: *) dhcpv6 client - fix ia expiration and lifetime validation; *) dhcpv6 server - acquire binding on renew if it does not exist; I see a lot of works on dhcpv6 in recents RCs, which is a good thing. Any timeline about adding options...
by Florian
Thu Apr 07, 2016 12:30 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105743

Re: v6.35rc [release candidate] is released, new wireless package!

Everyone who is still experiencing issues with upgrade/downgrade. In version 6.35rc46 we introduced fix: *) nand - fixed reboot loop after upgrade to >v6.35rc43; This fixed reboot loop, but you have to remember that within upgrade you can not have rc43-rc45 version involved. For example, upgrade fr...
by Florian
Wed Apr 06, 2016 5:06 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105743

Re: v6.35rc [release candidate] is released, new wireless package!

Everyone who is still experiencing issues with upgrade/downgrade. In version 6.35rc46 we introduced fix: *) nand - fixed reboot loop after upgrade to >v6.35rc43; This fixed reboot loop, but you have to remember that within upgrade you can not have rc43-rc45 version involved. For example, upgrade fr...
by Florian
Sun Apr 03, 2016 9:02 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105743

Re: v6.35rc [release candidate] is released, new wireless package!

I'm staying on rc43, rc45 seems risky...
by Florian
Mon Mar 28, 2016 9:10 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : DSCP on DHCP packets

I would suggest that, at the same time that you try to convince MikroTik that they should support this DSCP setting, you try to convince your ISP that they should not perform needless checking. Fine if they give out modems that send DHCP at higher priority, but why would you check in the server tha...
by Florian
Mon Mar 28, 2016 8:37 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : DSCP on DHCP packets

Some *nix dhcp clients work at the ip level, not raw socket level. It could be one solution if I'm not mistaken.
by Florian
Sun Mar 27, 2016 4:10 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : DSCP on DHCP packets

- I corrected the first post and the subject -
by Florian
Sat Mar 26, 2016 10:47 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : CoS on DHCP packets

Well I really hope it will be implemented somehow. For now I switched to PPPoE, but there is some overhead, and, soon Orange will only allow DHCP and I'll be screwed...
by Florian
Fri Mar 25, 2016 12:56 am
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : CoS on DHCP packets

generally its much better to make ISP respect standards instead. relying on 802.1x-2010 instead, for example(and MacSec, PortSec and other stuff in it), instead. I agree, but they are the number one ISP in France so they sort of do what they want :D But anyway, other *nux/nix based solution have a ...
by Florian
Wed Mar 23, 2016 9:33 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : CoS on DHCP packets

Still, solutions exists in other products :) The solution for EdgeOS was done by a amateur who has a Orange access too, he compiled the new dhclient himself...
by Florian
Wed Mar 23, 2016 7:58 pm
Forum: General
Topic: Impossible to block DHCP Server. By design, or bug???
Replies: 36
Views: 11670

Re: Impossible to block DHCP Server. By design, or bug???

Does the CCR have a hardware switch on it? (too lazy and braindead today to go look at the product flier on routerboard.com) If so, there's an option in the HW switch to twiddle things, including the Dot1P priority value - my 2011 has settings for this, and perhaps this would be the best way to do ...
by Florian
Wed Mar 23, 2016 6:17 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Re: Feature Request : CoS on DHCP packets

For the record, an ERL user (Ubiquity / EdgeOS) patched the open source dhclient by adding this 2 lines :

int val = 6;
setsockopt(sock, SOL_SOCKET, SO_PRIORITY, &val, sizeof (val));


(sock being used by raw sockets)

I know RouteurOS is different, but...
by Florian
Wed Mar 23, 2016 5:55 pm
Forum: General
Topic: Impossible to block DHCP Server. By design, or bug???
Replies: 36
Views: 11670

Re: Impossible to block DHCP Server. By design, or bug???

Thx, I just tried, but the bridge filter rule does nothing, the counters stay at 0. For the sake of it I tried to change to out-interface to vlan832-orange, same thing. Try in-bridge instead of out-bridge or just leaving no bridge specified? Also - you might grab a quick paket sniffer capture to di...
by Florian
Wed Mar 23, 2016 5:30 pm
Forum: General
Topic: Feature Request : DSCP on DHCP packets
Replies: 17
Views: 3927

Feature Request : DSCP on DHCP packets

EDIT : I was wrong in the following post. The real need is to be able to mark outgoing DHCP client packets with a DSCP value. The reason stays the same, the isp Orange need it to answer DHCP requests. And then, since Orange use a VLAN, we need a DSCP=>CoS mapping which would work for dhcp packets go...
by Florian
Wed Mar 23, 2016 12:59 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests

Hi.

Is this topic still read by the devs ?
by Florian
Wed Mar 23, 2016 12:13 am
Forum: General
Topic: Impossible to block DHCP Server. By design, or bug???
Replies: 36
Views: 11670

Re: Impossible to block DHCP Server. By design, or bug???

make a bridge called WAN /interface bridge add name=WAN connect the ether8 interface to it: /interface bridge port add interface=ether8 bridge=WAN move the vlan interface off of ether8 and onto the WAN bridge /interface vlan set [find where name=vlan832-orange] interface=WAN Then make a bridge filt...
by Florian
Tue Mar 22, 2016 11:38 pm
Forum: General
Topic: Impossible to block DHCP Server. By design, or bug???
Replies: 36
Views: 11670

Re: Impossible to block DHCP Server. By design, or bug???

My ccr is a dhcp client in that situation. And your solution doesn't work from what I understand, because the dhcp request is a raw socket thing, and doesn't enter in the firewall stack. Actually, you're comparing apples and oranges. This thread is about blocking inbound DHCP request frames from re...
by Florian
Tue Mar 22, 2016 11:10 pm
Forum: General
Topic: Impossible to block DHCP Server. By design, or bug???
Replies: 36
Views: 11670

Re: Impossible to block DHCP Server. By design, or bug???

Hello there, Any news on that ? My ISP need to receive DHCP Request with a priority of 6. In the current state, I can't "manipulate" the dhcp packet with the firewall "stack", so, no connexion... my crr 1009 is a 400 euros paper weight right now :/ Is this for your CCR to be a dhcp client, or a dhc...
by Florian
Tue Mar 22, 2016 9:56 pm
Forum: General
Topic: Impossible to block DHCP Server. By design, or bug???
Replies: 36
Views: 11670

Re: Impossible to block DHCP Server. By design, or bug???

That's great to know that the bridge firewall can intercept those packets! You are right, I was using the IP Firewall option, not the Bridge Firewall. As for the raw versus ip option, I put in a feature request and support said "not currently, but probably in the future ". Hello there, Any news on ...
by Florian
Tue Mar 22, 2016 6:36 pm
Forum: General
Topic: Prioritizing DHCP
Replies: 4
Views: 1631

Re: Prioritizing DHCP

Hi,

I need to have a Cos of 6 on the DHCP Request emitted by one of my vlan interface.

The last post is the way to do it ? ie creating a bridge and put the CoS there ? (since dhcp bypass the firewall brick ?)

Thx.
by Florian
Tue Mar 22, 2016 5:28 pm
Forum: General
Topic: DHCP, Raw Socket, and priority
Replies: 0
Views: 485

DHCP, Raw Socket, and priority

Hello there, My ISP need a CoS of 6 on the DHCP packet. But as far as I know, you can't force that in the dhcp client options of RouteurOS. And, if I create a mangle queue, it doesn't work either because the raw socket don't "enter" the firewall module, right ? So, is there a solution for that probl...
by Florian
Sun Mar 20, 2016 12:27 pm
Forum: Beginner Basics
Topic: Nat / in-interface / ethernet or vlan interface ?
Replies: 4
Views: 683

Re: Nat / in-interface / ethernet or vlan interface ?

Well, in my mind, I thought the both would work, since physically it still come in by "ether8". I guess I was wrong :D
by Florian
Sun Mar 20, 2016 12:00 pm
Forum: Beginner Basics
Topic: Nat / in-interface / ethernet or vlan interface ?
Replies: 4
Views: 683

Nat / in-interface / ethernet or vlan interface ?

Hello there. Sorry for the subject title, it's not very clear. I've a question about the "logic" of vlan interface and nat rules. I explain, I added a vlan interface on a "physical" interface (let say I added a vlan832 on the ehter 8 interface : /interface vlan add interface=ether8 name=vlan832-oran...
by Florian
Tue Mar 15, 2016 11:35 am
Forum: RouterBOARD hardware
Topic: CCR 1009 switch chip menu
Replies: 22
Views: 8662

Re: CCR 1009 switch chip menu

That was my main problem, because I read that switch port used more cpu than "cpu port". I have read that a few times as well, but could never reliably reproduce it in lab tests on both RB1100AHx2 and CCR1009-PC. If there is a difference, it is so minor it barely makes an impact. you are right is b...
by Florian
Mon Mar 14, 2016 9:07 pm
Forum: RouterBOARD hardware
Topic: CCR 1009 switch chip menu
Replies: 22
Views: 8662

Re: CCR 1009 switch chip menu

... Other than the switch-group ports sharing 1 gbps full-duplex towards the CPU, Routing/NATing etc. to a port in a switch-group is not slower than it is on any other port. That was my main problem, because I read that switch port used more cpu than "cpu port". But if it's wrong, great, I can use ...
by Florian
Mon Mar 14, 2016 2:02 pm
Forum: RouterBOARD hardware
Topic: CCR 1009 switch chip menu
Replies: 22
Views: 8662

Re: CCR 1009 switch chip menu

Thx a lot for the explanation and instructions. Without even using the bridge method, I'm still "afraid" of performances problems if I firewall/nat to a switched port. I've a 1gb/sec fiber connexion, would like to use fastpath, fasttrack&stuff. So, I guess I'll just put a switch I already have on et...
by Florian
Mon Mar 14, 2016 12:01 pm
Forum: RouterBOARD hardware
Topic: CCR 1009 switch chip menu
Replies: 22
Views: 8662

Re: CCR 1009 switch chip menu

Hello there, and sorry for posting in this old topic. Sorry for my bad english too, it's not my native language . I'll receive my CCR 1009 soon, and I don't get something about the swtich chip / switch ports. My CCR will replace and ISP box, home usage. My wan will be on port 8 , and my LAN on port ...
by Florian
Sun Mar 13, 2016 9:48 am
Forum: General
Topic: DHCPv6 PD not working
Replies: 11
Views: 3027

Re: DHCPv6 PD not working

Yes, Orange needs DHCPv6 options.

I hope we will have them soon :D