Hello all, I've got a wireless wire set to supply a house nearby with a 1gbit connection. The sender unit will be placed atop my garage and aimed at the house where the recieving unit is located on the roof. The distance between the units is around 45 meters, well within the parameters of the wirele...
Is Bluetooth only implemented in KNOT router ? https://help.mikrotik.com/docs/pages/viewpage.action?pageId=41680915 https://i.mt.lv/cdn/product_files/RB924i-2nD-BT5BG77_210810.png I actually don't know. If for example, I would brick and netinstall a knot would there be a specific routerOS download ...
Dear All, I've looked trough the forums but I cant seem to find anything related to bluetooth hardware. what would happen if I for example took a routerboard hex-s, flashed it with ROS7 and put a generic bluetooth dongle in it. Would that work or does routeros only has very specific bluetooth driver...
When you bond multiple interfaces there needs to be a bonding interface on the other site, either an own server or on the ISP sites. If the ISP is not possibly to do bonding your better of using PPC. Check out the wiki for more information. It may seem a bit difficult at first but once you get the h...
just to know the difference between IPQ4018 (hap ac2) and IPQ4019 (this baby and wap60G) https://www.codico.com/fxdata/codico/prod/temedia/newsimages_image/A1_Qualcomm_Dakota2.jpg So according to your sheet the RB450Gx4 should have the possibillity for dualband wifi? Wonder why mikrotik did'nt put ...
You need to setup a NAT rule to allow port 90 to the ip address of your NVR. Check this: /ip firewall nat add chain=dstnat dst-port=90 action=dst-nat protocol=tcp to-address=[IP OF NVR] to-port=90 This rule will allow connections on port 90 on your external IP address to reach your NVR. Different po...
Dear All, I need help in configurating the following setup. I'll try to be as clear as possible. Setup: RB411 with LTE and Wifi RB850Gx2 with VPN tunnel. Routers are connected in this way: RB411 Ether1 ---> RB850Gx2 Ether1 Ether 2 on RB850Gx2 is configured as a WAN port with dhcp client Ether3, 4 an...