Dear mikrotik user,

Do you have a request for us?

Our answer is: "NEVER !!!"

This ping is normal for mikrotik, taking into account that their switches are 100% garbage, junk. They sell new hardware without being tested. The hardware is ok if its for lab or home use. For enterprise environment, it is not OK to use it !

Hello, I am using a new CRS226 in my data room. The CRS226 is connected to a linux router (10gbps link, sfp+ 2 port). To this switch, there is connected another switch (other vendor) and some servers. Also, to the other switch there are some servers connected. The mikrotik ENTERPRISE READY switch (i...

What the hell is "OP" ? Have you read all posts from this topic? Of course I updated this garbage. Also, as i mentioned many times, there are no custom configs (the switch has most of its basic configs). The only things I have changed: management IP, password and shutdown ssh, telnet, www ...

To block ARP among hosts on the same broadcast domain, you'll have to get fancy with bridge filtering rules (allowing only ARP replies for the IPs you want to allow, per port). Can you give an example how to get fancy :) Lets say that on port 5 we only allow 192.168.10.100 witch MAC address 00:14:1...

Hello, I am using a CRS226-24G-2S+ switch and I would like to block IP stealing. I have some users with Linux boxes that are able to add / change IP's from my /24 subnet. My network is something like this: https://www.hostmag.ro/poze_diverse/infra_arp.png So....I would like to setup the CRS to deny ...

Hello, I have a CRS226-24G-2S+ and I cant get torch tool to work. Even if the selected interface has traffic, there is no output. https://www.hostmag.ro/poze_diverse/torch.png Factory firmware is: 3.22 RouterOS version: 6.36.3 I will upgrade to latest version, but I do not think this will resolve is...

First, nobody can begin to postulate on what the issue may be that's causing this behavior, as you haven't provided much information regarding your setup. Second, this is a user forum, and while many MikroTik employees are active here, is not the official MikroTik support channel. If you're having ...

Anybody ?

Shall I throw it up to the garbage and buy some other vendor (Not necessarily more expensive) ?

Thank you

Hello I have bought a new CRS226-24G-2S+ switch and I connected it to my router. Router with Mellanox MT26448 [ConnectX EN 10GigE connected to switch SFP+2 port with S+DA0001 cable. Switch software is 6.36 and firmware 3.22. RouterOS setting are default (with the exception that i have setup a public...

Noone aware if Mikrotik/RouterOS is able to limit packets per second (pps) per IP ?

The problem is that I do not what to limit pps for my IP address to many IP's. I need to block traffic from my IP address going to only one IP address (DOS). If i only rate-limit my IP, I could end up with blocking legitimate traffic. As I said, i have client that generate more than 90.000 pps (but ...

Hello, I own a small network and I would like to change some equipment: router and switch and I was thinking to buy CCR1036-8G-2S+ as router and CRS226-24G-2S+RM switch. The router connects to the ISP's (3 isps) and the switch connects to the router (10 gb link). The servers connects to the switch (...