Hi All, I was testing OSPF (and MPLS/LDP) on the CCR1016, CCR1036, CCR1072. The idea is: CCR1072 only has 7 ports. I need 10G connectivity to all 80 of my POP areas. To do this, in the datacenter I have 2x layer 2 switches trunked together with 100G ports. Then connected to two (each switch to one) ...
Any suggestions? We are currently filtering target by doing !IPv6/112 instead of allowing the entire /64.. luckily we did static addresses or this would not be possible.
We have this problem on all (approx 400+) HAP AC (962UiGS-5HacT2HnT) devices. It seems the WiFi chip is not able to handle any interference. Devices work great out in the wilderness at camp sites and such but perform horribly in a crowded environment. Access points from other vendors seem to perform...
Hi All, Running 6.41rc4 and can't get TR69 to work over https. Certificates imported and all. Anyone have the same problem (ie: bug?) [nick@Mikrotik-673706B8FBE4] > /certificate print Flags: K - private-key, D - dsa, L - crl, C - smart-card-key, A - authority, I - issued, R - revoked, E - expired, T...
Sorry if I'm reviving a really old thread, however.. Using 10.0.0.A/32 to link router A-B-C together things that work great: - OSPF - MPLS - LDP - VPLS (point to point between A-B or B-C) Things that do not work correctly - VPLS (between A-C no data RX on either router) Adding an additional loopback...
Hi All, We've been running 6.35 (stable) on our CCR1016 and we've noticed that the VRF we use for management crashes every few days. Nothing except a reboot will fix it. As soon as the 'crash' happens all route(s) distributed by OSPF from the VRF will be transmitted by the main routing table/ospf co...