You need to create VLAN interfaces on the bridge interface, not on interfaces that are part of the bridge. And then you bind the DHCP servers to the VLAN interfaces. So you have for example "ether1", "ether2" and "ether3" in "yourbridge". You configure "...

Good Day, I have a network setup that has 4 routers installed in it. 3 are in bridge mode and the 4th is in router mode. I have 3 Vlans setup 1, 50 and 70. I also have 3 DHCP Servers setup. The problem I am having is that devices on VLAN50 and VLAN70 are not getting DHCP address on any of the switch...

Hi. I have a CRS125-24G-1s Running v6.47.1. I have Split the Router in to two groups. Ports 1-8 are a private network for ham radio and 9-24 are for my home network. I have setup PPtP for access to the ham ports (1-8) with the Wan on eth1 and ports 2-8 on the bridge HAM-Bridge. I have DHCP running t...

Has anyone tried the new CRS326-24S+2Q+RM Cloud Router Switch? I am wondering if it has the same port issues when connection at 10GB to other CRS3xx switches as the CRS317.

Hi I have a CRS317-1G-16S+ and have had or trouble ticket open with Mikrotik support for months. I am wondering if anyone has had success getting their unit repaired or replaced and if so was the problem resolved with the new/repaired unit. In my case it works with 1Gb links. 10 GB links flap attach...

Any progress on this Mikrotik? It has been 6 months with no fix. Could we have an update and a plan to a fix?

I will add my agreement to this thread. I have a CRS317-1G-16S+ with 4 CRS328-24P-4S+ and 3 CSS326-24G-2S+RM All are using the Maxxwave MW-SX+MM-US Modules. I have the same port flaping on all the CRS328 ports and the CRS317 reboots on a regular basis. The links to the CSS326's seem to be stable. I ...