MikroTik

skullzaflare

No, it is also available for free. Some features that enhance backups are pro. Interesting, as I cannot get single firmware updates nor single backups to do anything I found why backups were not working. "Planer" does not work or error if you leave "cron" blank. I was assuming b...

skullzaflare

No, it is also available for free. Some features that enhance backups are pro.

Out of curiosity, is the backups and updates features COMPLETELY pay only? I notice even trying to do singles do not work

Interesting, as I cannot get single firmware updates nor single backups to do anything

skullzaflare

I think they fixed it with ROS 7.16 release. I currently now have the error, that the upgrade process hangs at an arbitrary percentage and does not proceed. Update: I don't exactly know what fixed it. But just a few minutes (30mins) later after upgrading my main router that runs The Dude the update...

skullzaflare

Out of curiosity, is the backups and updates features COMPLETELY pay only? I notice even trying to do singles do not work

skullzaflare

I am not well versed in linux. I tried to install this in a Debian LXC under Proxmox and failed. There are too many steps in the installation, and while I appreciate the detail and effort that went into creating the instructions, they did not work for me. I got as far as: psql -U your_username -d y...

skullzaflare

Hello, I installed this and have been looking at it and noticed a GUI bug. When you click "Adding new task" the "theme" "columns" and "Items per page" all open BEHIND the window, you can see them when you close the task. It would be nice if there was a place t...

skullzaflare

Router OS device firmware update via Dude fixed in 7.16 beta 2. :D P.S. They really tried to hide it: "fixed map element RouterOS package upgrade functionality" :lol: :lol: :lol: (on beta 1, not on beta 2 *) dude - fixed map element RouterOS package upgrade functionality; ) Finally someon...

skullzaflare

I noticed as of v7 the DNS override self hosting "check for updates" server breaks too. They just hang at "calculating download size..." and never continue If i change it back to v6 it still works fine Really wish the DUDE was fixed for this, the DNS override was just a backup fo...

skullzaflare

For your curiosity, I use only RB1100Dx4 [RB1100AHx4 Dude Edition] with SSD inside. Current database are near 200MB, is ridiculos amount compared to 256GB space on SSD ;) Has 774MiB free memory (1024GiB total) and the CPU ~20%. I monitor RouterBOARDS, Cambium PMP450i, PMP450m, PMP450b , PMP550, Ubi...

skullzaflare

These are the words of those who cannot use it, and not wanting to blame, takes it out on MikroTik, instead of on himself. I also went through some problems from 4.x to the current 6.47.10 that I use, but after having understood, it continues to work perfectly, allowing me among all The Dudes to mo...

skullzaflare

no, it has a space on the username or password and is interpreted by winbox as the fourth parameter or has a DOS reserved character on password, such as > and the command line is corrupted the " on filename are required if winbox is correclty installed on his own directory (with spaces on name...

skullzaflare

For us this issue started after crossing the 6.46.3 working line, after that is where dude went to garbage and doesnt like to use rOS tags and connecting is a pain. We have grown used to it at this point and are looking to replace the crap software and go elsewhere since it no longer functions how i...

skullzaflare

OK - finally sorted it out it appears what was missing was the inverted commas around "[Device.Password]" "C:\mikrotik\winbox64.exe" [Device.FirstAddress] [Device.UserName] "[Device.Password]" just to throw this in here too This works for a static always use this usern...

skullzaflare

Hey guys i noticed from the newsletter that there are two Mikrotik apps in the gplay store now, "Mikrotik Pro" which is the ugly one i have always used in the past and a "Mikrotik Home" I do really like the flow and interface in the "Home" version but it appears to not ...

skullzaflare

Should I just downgrade to long term version?

6.46.3 is the latest "stable" dude from what we have found. We are still fumbling with newer versions but they are not stable

skullzaflare

Verify you have the current DUDE installation pointing at a valid use location for the data before the import

skullzaflare

Use The Dude, you can upgrade 1000 device at same time, if you want, and no script or fake web update are required. This only does the software side and not routerboard, this is OP's problem. In my case, DUDE is a PoS on 6.46.3+ firmware if you have rOS enabled on the routers. So its useless for ma...

skullzaflare

We just have the routers "scheduled" to check themselves for a routerboard update upon boot always /system scheduler add name=firmwarecheck-reboot on-event="#### Check for Firmware Update \r\ \n\r\ \n /system routerboard\r\ \n :if ( [get current-firmware] != [get upgrade-firmware]) do...

skullzaflare

The timeouts can occur if DUDE server VS routers rOS is to far apart (if it caught one of the big updates like 6.46.3 to 6.46.4 breaks it)
Can also be permissions or IP>Services allowed IP's (of course winbox port follows that too)

skullzaflare

First thing i would try is move the DB to a usb drive, point DUDE server settings to it, and see if it will enable. If it does, then you have data that is adding up.

skullzaflare

2020 and still he we are with the same problem.

ROS 6.45.9
Any solution?

We had this issue if the storage device for database was garbage. Moving to SSD fixed our issue with this

skullzaflare

The last working DUDE was 6.46.3, after that it crashes a lot.
I do have a 6.47.1 semi functional, takes 30 attempted log ins to get in, and i only have 5% of the network on it and its easy to crash

skullzaflare

There is additional custom user group with passive rights and dude connects by user which is member of that group. Dude is not connecting with admin rights to the devices.

Oh, i didnt realize that is what you ment. That is how we are setup as well

skullzaflare

I am not using invoking winbox from dude because I use special user with lowered rights for the the dude monitoring. Such user would be useless in winbox... And it works good without any obvious problems. Dude is also accepting syslog messages from the devices and store them as expected. I upgraded...

skullzaflare

So I did a test for you. Upgraded one of disposable devices in my lab to 6.47.2 (RB333 model, PowerPC architecture). The result in 6.46.6 Dude: RB333 v-6-47-2 in 6-46-6 Dude.JPG It is accessed both the winbox and SNMPv3 protocols without any problems from dude. I am interested in how your CHR on 6....

skullzaflare

/dude set data-directory=(new_db_path)

You likely need to reset the DUDE database location, otherwise its trying to restore it to the main self (which i assume only has 95mb free)

skullzaflare

We are having same issue, roll back to 6.46.3 and the issue goes away, anything above 46.3 has this issue. I have been fighting this for 2 weeks, we are just using the older dude that cant read routers...

DUDE was broken in 46.4 when they changed DUDE stuff, no longer functions properly

skullzaflare

Someone in another thread mentioned that capsman in v7 worked, but CAP's had to be v7 as well... That was me, correct i had to flash my cAP AC to v7 before they would talk to the CAPS in my AC2 Its working stable, but it is a little buggy in the sense that the cap interfaces in the AC2 do not show ...

skullzaflare

Update on CAPs, i updated one of the CAP AC to 7, then it recognized my ac2 capsman again.
Incase anyone else happens to try it.

Edit - found a new bug, CAP AC lost poe out ability, no longer in interface, HOWEVER i can see it in terminal but i cannot enable it

skullzaflare

I flashed last night to test it out, noticed no OSPF (atleast i havent found it yet)
Also noticed my CAPS stopped working, appears they cant see it? (i didnt flash the caps ac)

Only things i have noticed so far, but it was 1am lol

skullzaflare

Has anyone run into an issue with ports randomly leaving the bridge to go "unknown" interface? We upgraded 1100 customer after a small test batch, all almost 2 weeks ago. We are having random customers call and finding the wlan or another port leaving the bridge, and usually when it does i...

skullzaflare

May or may not help. This is the local part of the script on ours # Set Filename variables. Do not change this unless you want to edit the format of the filename. :local date ([:pick [/system clock get date] 0 3] \ . [:pick [/system clock get date] 4 6] \ . [:pick [/system clock get date] 7 11]); :l...

skullzaflare

Related/unrelated?
Downgraded a customers router from 6.42.1 to 6.40.8, the bridge interface got deleted, resulting in no ports/dhcp on a bridge.

skullzaflare

CHR - Microsoft AZURE : After reboot VM works fine, 2 hour later can't get IP address from DHCP server, static IP don't working, enable/disable iface/ dhcp client - without sucess. Reboot can temporarily fix this problem. Might be same issue for you. We started rolling it out for security sake. 1/3...

skullzaflare

Hey guys i am having issues getting any router to take a rsc after 6.38.7. Anyone else run into this? It will take the config if i c/p into terminal, but reset/load stopped working after 38.7. This for me is tested on 951, 951g, 962, RBD52, and 952. /interface bridge add name=bridge /interface ether...

skullzaflare

new hAP ac² Dual Band Desktop AP good choice I ordered one to replace a 962, our vender said they expect to have them around the end of march. I am unhappy that Mikrotik has no support for any of the wave2 features however, and that i cant get a answer as to if you plan to add the features support ...

skullzaflare

Hello guys, working on a new x86 machine (possibly CHR depending how things go) I am running into an issue here, we initially ordered 4 i340-t4 NICS to run along side our x520 SFP+ card. Machine booted no issues, however the cards we were sent were used with damage so we returned them. (along with a...

skullzaflare

So its my understanding that the new hap ac has wave 2 support? Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously? Currently we don't...

skullzaflare

Verrrrry late reply!! I had been trying to avoid network stuff myself lol. IT WORKS!! Of course you probably knew that! We have been switching form a bridged network and everything is going OSPF. So i played around with this today since they installed new panels at a tower and we had no access to th...

skullzaflare

Ended up taking monday off lol. Will test today

skullzaflare

Thanks, will give it a try monday when i get in. Since the 169 works regardless of if the radio is programmed or not, it can be live tested too!

skullzaflare

So, i am no networking tech obviously. This is a cap of what is at one site we had an issue at prior to my initial post. Radio on port 2 (which is 10.255.2.34 addressed) can normally be accessed from the office with its IP, however a tech accidently kicked it to SM mode and cause some issues. All of...

skullzaflare

I have been digging a while but have not found anything specific. So i work at a wireless ISP using cambium APs at tower sites, and Mikrotiks as well. So a question being, cambium radios are always accessible at 169.254.1.1 if you put a 169 on your computer (locally connected), so what i am interest...

skullzaflare

After removing the bridge its working great! Both the 10.1 and 0.2
Thanks a mil!

skullzaflare

Ok so we took the config and did a slight modification. /ip address add address=192.168.88.1/24 interface=bridge network=192.168.88.0 add address=192.168.88.12/24 interface=ether1 network=192.168.88.0 add address=192.168.88.13/24 interface=ether1 network=192.168.88.0 add address=192.168.88.14/24 int...

skullzaflare

The radios are accessed via web at 192.168.0.2 for programming, simply, one at a time takes forever, would like to be able to do multiple at once. They all can only be accessed by 0.2. After first programming, they are all finished via 192.168.10.1. Aside from using multiple computers to do multiple...

skullzaflare

TCP/IP Port 80
All through the browser

RB941-2nD
RB951-2nD
RB952Ui-5ac2nD-US

Are routers available for this. Will not need internet access, so wan is not important, Ideally would like to be able to program 3-4 at same time if possible

skullzaflare

Hey guys, new here, and new to mikrotik. So i am programming Cambium radios for our WISP network, and programming one at a time is a bit slow..Though i have starting using 2 computers to do so, speeding it up, however i had the idea, i should be able to do 3 at a time through a router. I am sitting ...

Search found 48 matches