Community discussions

Search found 85 matches

by korg
Thu Oct 10, 2019 4:24 pm
Forum: General
Topic: Hotspot 'issue' - maybe future feature
Replies: 0
Views: 365

Hotspot 'issue' - maybe future feature

Hi, my idea was to setup three different WLAN's on three different AP's but to use the same hotspot pool and hotspot server. i had following idea while setting up the hotspot .. why not use the same hotspot server resp same dhcp server but only on three different WLAN's with three different html's.....
by korg
Wed Jul 24, 2019 1:43 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

Hvala ti :)... I see.. Could you maybe.. upon your experience ... change my code with your suggestions? VLAN and so... My logic was.. ok.. i have a bridge and those two ports VLAN20_Office and VLAN30_Guests should be tagged... and MGMT not tagged... or... if you can... maybe to write me (a mail) wit...
by korg
Tue Jul 23, 2019 3:01 pm
Forum: General
Topic: separate internet access on one mikrotik; isp1 <-> lan1, isp2<-> lan2
Replies: 4
Views: 343

Re: separate internet access on one mikrotik; isp1 <-> lan1, isp2<-> lan2

Hi roswitina,

did you see my topic which have the same subject?

korg
by korg
Tue Jul 23, 2019 3:00 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

Hi Sindy,

did you see my code?

tx

korg
by korg
Mon Jul 15, 2019 6:36 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

Hi Sindy, here is my code... GW: /interface bridge add name=WIFI-br0 protocol-mode=none add name=bridge1 /interface ethernet set [ find default-name=ether7 ] comment="AP 1" name=AP1-NET-eth7 speed=\ 100Mbps set [ find default-name=ether8 ] comment=AP2 name=AP2-NET-eth8 speed=100Mbps set [ find defau...
by korg
Fri Jul 05, 2019 10:58 am
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

Hi Sindy,

thank you very very much for your help... i really appreciate it ... :)...

i haver configured the setup in a bit different way.. and will paste my config later today... i would be curious to hear it from you... :)

tx

korg
by korg
Mon Jul 01, 2019 8:44 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

Really? wow! thanks a lot....

could you post it here .. resp send me a pm?

tx

korg
by korg
Mon Jul 01, 2019 6:14 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

ok... :)... i have understood the riddle :)

tx

korg
by korg
Mon Jul 01, 2019 1:00 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

i dont have MT AP's but UBNT.. two mesh pro. Which means the VLAN approach is mandatory. From what I have learned here at the forum, UBNT can link each SSID to a VLAN but the management must be tagless. So you need three subnets/VLANs - one tagless for management of UBNT, one tagged for "office", on...
by korg
Sun Jun 30, 2019 8:33 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Re: Multiple SXT provider / separate DHCP servers

Thank you Sindy. I know .. its 'network basic'.. and i understand and know 'how and what' i need to config.. the issue is.. how.. i mean how must i config 3011 to act as a router, firewall, VLAN.. and so on...i know that i need to mangle traffic from every SXT to be able to define 'which traffic sho...
by korg
Sat Jun 29, 2019 8:38 pm
Forum: General
Topic: Multiple SXT provider / separate DHCP servers
Replies: 15
Views: 1317

Multiple SXT provider / separate DHCP servers

Hello, i need to make the following setup: i have two SXT LTE's with two different providers (SIM cards). Each of those SXT's should provide internet connection for two different subnets: office and guests. 3011 should act as the router and should provide DHCP servers for those two subnets. Now, two...
by korg
Fri Jun 14, 2019 2:17 am
Forum: General
Topic: MT setup- FW setup due to GDPR - Hotspot - General Security Issue(s)
Replies: 5
Views: 530

Re: MT setup- FW setup due to GDPR - Hotspot - General Security Issue(s)

I've found one of the GDPR parts of secure MT's.. in this case its talking about SOHO NAS security... Port knocking is the subject.... they are using it in order to secure access for the winbox serivce... https://mum.mikrotik.com/presentations/BU19/presentation_6879_1560110235.pdf so, apart from the...
by korg
Wed Jun 12, 2019 10:01 pm
Forum: General
Topic: MT setup- FW setup due to GDPR - Hotspot - General Security Issue(s)
Replies: 5
Views: 530

Re: MT setup- FW setup due to GDPR - Hotspot

Yes and no... so, if i .. for example enable logging in with facebook or some other social media... i do not need any 'extra' config within the customers fw? I am also thinking about.. do i need extra security for example.. to connect to the server only through VPN and not RDP port... 'must' i disab...
by korg
Wed Jun 12, 2019 8:16 pm
Forum: General
Topic: MT setup- FW setup due to GDPR - Hotspot - General Security Issue(s)
Replies: 5
Views: 530

MT setup- FW setup due to GDPR - Hotspot - General Security Issue(s)

Hi, i have several clients who are using MT as a FW. They are also having Hotspot functionality within their site. Is there any 'specific' FW setup in order to comply GDPR law? did anyone 'had' this issue... resp needed to 'correct' its config on the FW? tx for any tip and help and insight :) korg
by korg
Sun May 19, 2019 2:52 pm
Forum: General
Topic: Can't see local IPs from VPN
Replies: 9
Views: 597

Re: Can't see local IPs from VPN

Hi,

thanks for your answer... but it does not... thats the problem.

i get the correct IP address resp subent... but i can not ping no IP address friom that range...

korg
by korg
Sat May 18, 2019 8:39 pm
Forum: General
Topic: Can't see local IPs from VPN
Replies: 9
Views: 597

Re: Can't see local IPs from VPN

Hi, i have almost the same issue... My local IP subnet is 10.0.255.0/24. i have setup the L2TP VPN on my MT and within the profile of the L2TP to get a local IP address 10.10.10.1.and remote client 10.10.10.x/24 resp from the l2tp-pool. i get the correct conection but i am not able to see the local ...
by korg
Thu Apr 25, 2019 3:57 pm
Forum: General
Topic: Two SXT LTE, one for each subnet - how?
Replies: 4
Views: 266

Re: Two SXT LTE, one for each subnet - how?

I could emulate such a configuration in GNS3?
by korg
Thu Apr 25, 2019 3:53 pm
Forum: General
Topic: Two SXT LTE, one for each subnet - how?
Replies: 4
Views: 266

Re: Two SXT LTE, one for each subnet - how?

Ok.. tx.. i'll post a rsc file when i've set up this configuration but .. tx for your idea :)

korg
by korg
Thu Apr 25, 2019 2:22 am
Forum: General
Topic: Device Discovery question
Replies: 3
Views: 220

Re: Device Discovery question

Exiver,

tx a lot. I will try all three ways of 'allowing' or 'disallowing' a discovery.

tx

korg
by korg
Thu Apr 25, 2019 2:01 am
Forum: General
Topic: Device Discovery question
Replies: 3
Views: 220

Device Discovery question

Hi,

i was wondering how can i make my MT 'invisible' from the winbox discovery interface? For example, i have two WLAN networks. If in first (in one subnet) my MT can be discovered, if another (different subnet) my MT does not show up.

How can i setup such a configuration?

tx

korg
by korg
Thu Apr 25, 2019 1:58 am
Forum: General
Topic: Two SXT LTE, one for each subnet - how?
Replies: 4
Views: 266

Two SXT LTE, one for each subnet - how?

Hi,

i have a question. How can i setup a MT router with two different subnets so that each subnet uses its own SXT LTE antenna?
Screen Shot 2019-04-25 at 00.56.35.png
tx

korg
by korg
Sun Apr 14, 2019 7:13 pm
Forum: General
Topic: hotspot can't drop wifi client after session time finished
Replies: 4
Views: 405

Re: hotspot can't drop wifi client after session time finished

Hi,

how did you setup a hotspot authentication via SMS? Is it possible to get a script for it?

tx

korg
by korg
Sat Apr 13, 2019 9:46 pm
Forum: General
Topic: WinBox on mac - could not save configuration issue
Replies: 0
Views: 292

WinBox on mac - could not save configuration issue

Hello, i am running high sierra and downloaded winbox app from jos's website... if I start the app.. i get immediately an error message .. could not save configuration Screen Shot 2019-04-13 at 20.45.34.png ... Even if i try do update the app.. its not letting me.. i did a chmod 777 on com.mikrotik....
by korg
Mon Apr 01, 2019 2:40 am
Forum: General
Topic: HOTSPOT - is it possible - different user different landing pages?
Replies: 0
Views: 262

HOTSPOT - is it possible - different user different landing pages?

hello there, I was wondering if it would be possible to have for every hotspot user a different landing page? I know there is a file in hotspot html's where I can add a page which will be accessed after successfully connecting to the hotspot. and its valid for ALL users. Now, I would like to have a ...
by korg
Wed Mar 13, 2019 4:53 pm
Forum: General
Topic: In Winbox same device with two MAC addresses - Why?
Replies: 0
Views: 192

In Winbox same device with two MAC addresses - Why?

Hello, I know its pretty simple and basic question to to group but... ever since I have uploaded MT from 6.35.x to 6.44 I see some devices shown in Winbox twice like this... Screen Shot 2019-03-13 at 15.50.21.png I assume it has something with discovery interfaces or a new setup. So, what should I c...
by korg
Sun Jan 20, 2019 1:04 pm
Forum: General
Topic: several AP's including Hotspot
Replies: 6
Views: 487

Re: several AP's including Hotspot

Filip,

you can contact me... I could help you

Zeljko
by korg
Wed Jan 09, 2019 1:59 am
Forum: General
Topic: Hotspot With SMS OTP
Replies: 15
Views: 4465

Re: Hotspot With SMS OTP

Hi,

can you post your solution at spider_key@yahoo.com?


tx

korg
by korg
Sun Jan 06, 2019 6:52 pm
Forum: General
Topic: VLAN is to complicated
Replies: 21
Views: 1930

Re: VLAN is to complicated

@pcunite: could you please explain me this line # Set the port's egress behavior. How would you know this? /interface bridge vlan add bridge=B1 tagged=B1 untagged=ether1 vlan-ids=20 is this correct understanding of this line? I am defining a VLAN bridge (so all included interfaces in the VLAN bridge...
by korg
Fri Nov 16, 2018 8:11 am
Forum: General
Topic: Hotspot Problem with Apple IoS 11.3.1, is someone having the same problem?
Replies: 8
Views: 3090

Re: Hotspot Problem with Apple IoS 11.3.1, is someone having the same problem?

Hi,

my domain name does not have name local in it and it still does not show pop up.

korg
by korg
Sat Nov 03, 2018 9:16 pm
Forum: General
Topic: DHCP keep 'resetting' every 10-15 minutes
Replies: 2
Views: 319

Re: DHCP keep 'resetting' every 10-15 minutes

No one?
by korg
Fri Nov 02, 2018 2:19 pm
Forum: General
Topic: DHCP keep 'resetting' every 10-15 minutes
Replies: 2
Views: 319

DHCP keep 'resetting' every 10-15 minutes

Hello,

i am wondering why is my wAP LTE resp DHCP on it keep dissociating DHCP clients every 10-15 min. Myt ROS is 64 and it has very 'simple' setup...

Should I post rsc?

tx

korg
by korg
Fri Oct 05, 2018 1:46 pm
Forum: Beginner Basics
Topic: Not allowing one certain IP address to see the rest of the network
Replies: 14
Views: 946

Re: Not allowing one certain IP address to see the rest of the network

And... how can i Limit only this one particular MAC address to connect to the WLAN network?

korg
by korg
Fri Oct 05, 2018 1:06 pm
Forum: Beginner Basics
Topic: Not allowing one certain IP address to see the rest of the network
Replies: 14
Views: 946

Not allowing one certain IP address to see the rest of the network

Hi, i have a question about allowing resp disallowing one certain IP address from the subnet to access nothing else but internet. So, i have a office subnet 192.168.0.x... i allowed one laptop to access this network .. but.. now it can see all network. How can i setup FW so that this IP has ONLY con...
by korg
Sat Sep 15, 2018 3:59 pm
Forum: Beginner Basics
Topic: Access modem behind Mikrotik [SOLVED]
Replies: 6
Views: 1151

Re: Access modem behind Mikrotik [SOLVED]

If Vigor is having DHCP client as well, just enable DHCP-CLient on your Mikrotik and add a route to it.
by korg
Sat Aug 18, 2018 10:54 am
Forum: Wireless Networking
Topic: SXT LTE connection issues
Replies: 0
Views: 309

SXT LTE connection issues

Hi, My customers are experiencing connection issues with SXT LTE antenna meaning that every once in a while the lte connection drops. What they then do is restart the antena. Is someone aware why is that hapenning? The signal is pretty ok -75dB... if i restart the antenna everything works normaly. T...
by korg
Sat Aug 18, 2018 10:51 am
Forum: Scripting
Topic: SXT LTE KIT - resrart if no active LTE connection script
Replies: 0
Views: 320

SXT LTE KIT - resrart if no active LTE connection script

Hi, My customers are experiencing connection issues with SXT LTE antenna meaning that every once in a while the lte connection drops. What they then do is restart the antena. I was thinking maybe to use a script saying if no active lte connection then restart the antenna. Could someone help me in th...
by korg
Tue Jul 31, 2018 1:54 am
Forum: Wireless Networking
Topic: Wire 60 - through the trees
Replies: 6
Views: 883

Re: Wire 60 - through the trees

Tx to all...

so... 5 Ghz is 'working'... tje signal is approx -72-73 dB... i know this is on the edge .. but its working...

tx for all your inputs

korg
by korg
Mon Jul 30, 2018 12:05 pm
Forum: Wireless Networking
Topic: Wire 60 - through the trees
Replies: 6
Views: 883

Re: Wire 60 - through the trees

Hi,

@mistry7.. it is a lot... actually .. there is no LOS whatsoever between those two locations...

i'll stick to 5G...

tx

korg
by korg
Sat Jul 28, 2018 12:54 am
Forum: Wireless Networking
Topic: Wire 60 - through the trees
Replies: 6
Views: 883

Wire 60 - through the trees

Hi, i need to connect two remote places which are approx 70-80 M away from each other. If the LOS would exist.. this would be no issue to connect those to point by two 5 Ghz antennas via PTP. BUT... there are trees in between them.... i put the 'station' antenna like 6 7 m above the spot... but stil...
by korg
Mon Jul 16, 2018 10:29 pm
Forum: General
Topic: IP Binding - Hotspot
Replies: 1
Views: 313

Re: IP Binding - Hotspot

No one?

korg
by korg
Sun Jul 15, 2018 12:35 pm
Forum: General
Topic: IP Binding - Hotspot
Replies: 1
Views: 313

IP Binding - Hotspot

Hi, i have a working hotspot and wanted to bypass login page for some users. There are lots of 'how to' videos and web pages around and they are all saying: .make a static IP address of the wanted device in DHCP leases .choose make binding .thats it! but.. it is not working.... My wish is to allow ....
by korg
Sun Jul 01, 2018 7:49 pm
Forum: General
Topic: EOIP Tunnel question
Replies: 13
Views: 1223

Re: EOIP Tunnel question

I see... even me.. i did not do any multiple bridges over single wireless link...

tx anyway

korg
by korg
Sun Jul 01, 2018 4:34 pm
Forum: General
Topic: EOIP Tunnel question
Replies: 13
Views: 1223

Re: EOIP Tunnel question

I have three disctinted bridges for each and every IP subnet. Via LAN it would be pretty straight forward to setup EOIP tunnels but here i have a wireless link between locations. thank you for the suggested link where is shown and described how to connect different VLANs but i have several things/is...
by korg
Sun Jul 01, 2018 2:45 pm
Forum: General
Topic: EOIP Tunnel question
Replies: 13
Views: 1223

Re: EOIP Tunnel question

So Sindy, if i understood correctly... i can establish wireless link between two SXT5 devices (through what? repeater option or PTP option?) and with one EOIP tunnel i could 'push' all other EOIP tunnels? Something like... .establish wireless link between two SXt5 antennas with repeater option .defi...
by korg
Sun Jul 01, 2018 12:33 pm
Forum: General
Topic: EOIP Tunnel question
Replies: 13
Views: 1223

Re: EOIP Tunnel question

@Sindy... sorry... i did not draw every MT device .. especially on the bottom right... SXT 5 is connected to PowerBox which will deliver PoE and act 'as if' a small switch/router. So, this is correct drawing Screen Shot 2018-07-01 at 11.31.39.png My question is and remains, how can connect those thr...
by korg
Sat Jun 30, 2018 10:00 pm
Forum: General
Topic: EOIP Tunnel question
Replies: 13
Views: 1223

Re: EOIP Tunnel question

Hi SIndy, tx for you answer... here is my drawing Screen Shot 2018-06-30 at 20.54.28.png So, i have 3 ip subnets... and i want to connect those sxt 5 via PTP with all three IP subnets... to be able to to have everywhere all three subnets available. Why did i mention unmanaged switch? because i have ...
by korg
Sat Jun 30, 2018 11:30 am
Forum: General
Topic: EOIP Tunnel question
Replies: 13
Views: 1223

EOIP Tunnel question

Hi, i want to connect two places with SXT 5 via PTP but... i have in my main gateway several EOIP tunnels. For different IP subnet i used different EOIP tunnel. In order to 'extend' those IP subnets via PTP links... should i connect only main EOIP tunnel or must i have connection .. lets say 3 EOIP ...
by korg
Sat Jun 02, 2018 8:11 pm
Forum: General
Topic: 6.42.3 Hotspot issue on CCr1009
Replies: 4
Views: 823

Re: 6.42.3 Hotspot issue on CCr1009

Sure i have... with no help... on the contrary.. i had to redo all config of the router .. its is a 850gx2 as the device was unresponsive after update to 6.42.2...

but still it does not work...

korg
by korg
Fri Jun 01, 2018 2:52 pm
Forum: General
Topic: 6.42.3 Hotspot issue on CCr1009
Replies: 4
Views: 823

Re: 6.42.3 Hotspot issue on CCr1009

Hi, i am having this issue since 6.42.. and have written to Mikrotik with not so big improvement. The config was done on 6.32.3 and it was working just fine until I have updated it to 6.42 and since then.. the same issues.. my Hotspot users are getting the correct IP address from the Hotspot pool bu...
by korg
Fri May 18, 2018 12:40 pm
Forum: General
Topic: Hotspot Problem with Apple IoS 11.3.1, is someone having the same problem?
Replies: 8
Views: 3090

Re: Hotspot Problem with Apple IoS 11.3.1, is someone having the same problem?

Hi... i have almost the same problem... after ROS upgrade to 6.42.1 the captive portal has not been showing anymore... on previously normal working three hotspot servers... As user Xcelsium i did not use wireshark to debug the network traffic... but i see that none of the Hotspot rules under NAT are...
by korg
Sun May 13, 2018 11:42 pm
Forum: Wireless Networking
Topic: Hotspot users can't reach https sites since update
Replies: 3
Views: 630

Re: Hotspot users can't reach https sites since update

HI,

I have almost the same problem... my hotspot login pages are not opening at all... and this happened since update from 6.33 to 6.42...

did you get some workaround from MIKROTIK?

tx

korg
by korg
Sun May 13, 2018 11:13 pm
Forum: General
Topic: Hotspot not opening login page
Replies: 1
Views: 266

Re: Hotspot not opening login page

I have tested it... if I put a MAC address of a device which has got an ip address from the dhcp hotspot server.. and put it into IP BINDING.. it works... so.. with other words.. hotspot is working... but.. why isn't it showing html login page any more?

korg
by korg
Sun May 13, 2018 11:05 pm
Forum: General
Topic: Hotspot not opening login page
Replies: 1
Views: 266

Hotspot not opening login page

Hi, till the update on 6.42... my hotspot was working fine but then the pop up page is not showing anymore. I have tried to downgrade my router where hotspot has been installed but no success. now my router is running on 6.33. Does anyone has an idea why the html is not showing on the logged devices...
by korg
Mon May 07, 2018 4:11 pm
Forum: General
Topic: wAP LTE KIT and existing network
Replies: 1
Views: 298

Re: wAP LTE KIT and existing network

no one?
by korg
Sun May 06, 2018 11:00 pm
Forum: General
Topic: wAP LTE KIT and existing network
Replies: 1
Views: 298

wAP LTE KIT and existing network

Hi, i would like to connect wAP LTE Kit to existing network with and another ADSL pppoe internet connection. What i would like to do is use both internet connections LTE Kit and existing ADSL. 951 is acting as a router and dhcp. Now, am i not sure how should i connect LTE kit. Should i make a bridge...
by korg
Wed May 02, 2018 12:08 am
Forum: General
Topic: Hotspot not working since 6.42.1
Replies: 1
Views: 482

Hotspot not working since 6.42.1

Hi, i have 3 hotspots on my 850gx and since update on 6.42.1 no one can access html page resp the login page does not show up. and what i see that all three bridges which are 3 hotspot connected.. all of them have the same MAC address. Here are some logs from 850. Screen Shot 2018-05-01 at 22.51.39....
by korg
Sat Apr 28, 2018 11:58 pm
Forum: Beginner Basics
Topic: PPTP Routing
Replies: 3
Views: 358

Re: PPTP Routing

Tx guys...

what i did is ..i've added those two lines

/ip firewall nat
add action=masquerade chain=srcnat out-interface=pptp-out2-wanted

/ip route
add distance=1 dst-address=192.168.92.0/24 gateway=pptp-out2-wanted

and i could both ping and access remote 192.168.92.0/24 subnet.

tx again

korg
by korg
Sat Apr 28, 2018 11:03 pm
Forum: Beginner Basics
Topic: PPTP Routing
Replies: 3
Views: 358

PPTP Routing

Hi.. i need your help resp a tip where am i missing the point. I know that configuration is pretty simple but still its not working.. i have my local network 10.0.0.0/24 subnet... and have connected to the network 192.168.92.0/24 via VPN PPTP. I got the local address 192.168.92.125. I have put route...
by korg
Fri Dec 15, 2017 7:26 pm
Forum: General
Topic: Hotspot and Android phones
Replies: 0
Views: 236

Hotspot and Android phones

Hi, i am curious... all Android users don't get and see the splash login page for the hotspot and all iOS users do. Resp.. the splash login screen pops up automatically on iOS devices but not on Android devices. Is this a 'common' MT issue or just an Android thing? Even if I enter the IP address of ...
by korg
Fri Dec 15, 2017 6:22 pm
Forum: General
Topic: Possible routing issue - any suggestion?
Replies: 2
Views: 316

Re: Possible routing issue - any suggestion?

are u totaly sure about the IPs and Subnets given ? /23 ? Yes... totaly sure pls provide full config or screenshot of firewall and NAT FW.png NAT.png Did you use Wizard ? Yes.. i did Lancom has DHCP-Server enabled on ETH4 ? No.. LANCOM has static IP address which i have given to the TCOM Technician...
by korg
Fri Dec 15, 2017 5:39 pm
Forum: General
Topic: Possible routing issue - any suggestion?
Replies: 2
Views: 316

Possible routing issue - any suggestion?

Hi, i have the following setup: Screen Shot 2017-12-15 at 16.25.44.png My MT 850 has gor two bridges: one for OFFICE users (192.168.0.x/24) and other for GUESTS user (10.5.50.0/23). MT Hotspot resp bridge guests has ip 10.5.50.1.MT is connected via Eth3 (which i put to bridge guests) to LANCOM route...
by korg
Wed Dec 13, 2017 7:00 pm
Forum: Wireless Networking
Topic: Disconnect if signal drops under -75 dB
Replies: 7
Views: 3043

Re: Disconnect if signal drops under -75 dB

Thank you, its working. So, no default authentication and Access list with those entries...

great

korg
by korg
Wed Dec 13, 2017 12:16 pm
Forum: Wireless Networking
Topic: Disconnect if signal drops under -75 dB
Replies: 7
Views: 3043

Disconnect if signal drops under -75 dB

Hi,

i have put this code to wireless tables - access list but it does not seem to work. I wanted to setup 'if the signal drops under -75 then this client should disconnect from wlan'.

Any other suggestion?

tx

korg
by korg
Mon Nov 06, 2017 5:05 pm
Forum: Wireless Networking
Topic: Automatic deletion from registration list WLAN
Replies: 1
Views: 240

Automatic deletion from registration list WLAN

Hi, i would like to MT automatically disconnect resp 'delete' all entries from a registration list on my WLAN AP if the client is for example 10 minutes inactive or if the signal drops under 78dB or,,, Where is my issue? i have set wireless - advanced - max station count 30 and it 'fills up' very qu...
by korg
Mon May 01, 2017 9:09 pm
Forum: General
Topic: Can i queue an interface resp WLAN?
Replies: 5
Views: 1015

Re: Can i queue an interface resp WLAN?

Sash7... tx... Do.. setup a new DHCP only on WLAN... different than the actual bridge.. and in the firewall forward from one to another subnet... I'll try... But what i've noticed... if i setup a virtual wlan and put a queing on this Virtual AP interface.. it works fine... so... it looks like softwa...
by korg
Mon May 01, 2017 3:51 pm
Forum: General
Topic: Can i queue an interface resp WLAN?
Replies: 5
Views: 1015

Re: Can i queue an interface resp WLAN?

Hi...

thank you for your reply...

I have also a bridge in my setup.... but...thats the point.. i dont want to put whole bridge to queing .. only WLAN interface....

korg
by korg
Mon May 01, 2017 11:25 am
Forum: General
Topic: Can i queue an interface resp WLAN?
Replies: 5
Views: 1015

Can i queue an interface resp WLAN?

i was trying to out simple queue on the WLAN interface but it was not working... if i out though on lets say bridge1.. its working... Does it mean that i can not activate queue on WLAN interface... resp interfaces at all? Or there can or could be another way to apply queing on WLAN interface? tx korg
by korg
Tue Jan 10, 2017 10:46 am
Forum: General
Topic: I want to see MAC address of the PC/Laptop
Replies: 5
Views: 621

Re: I want to see MAC address of the PC/Laptop

Hi Sob, correct... my code is wrong.. i am blocking from WAN (no need to block) in order to log... not very elegant :)... i've deleted it ... so... my issue.. or better to say.. my wish is.. to log the MAC address of the device (laptop/pc...) which is generating 'traffic' on port 53 resp which is tr...
by korg
Mon Jan 09, 2017 11:25 am
Forum: General
Topic: I want to see MAC address of the PC/Laptop
Replies: 5
Views: 621

Re: I want to see MAC address of the PC/Laptop

Hi Sob,

i have blocked also as you've said input part too... this line is only line with which i tried to log IP's into address list in order to block them.

Is there a way to log MAC addresses from local machines to see who is causing this DNS issue?

Korg
by korg
Sun Jan 08, 2017 2:42 pm
Forum: General
Topic: I want to see MAC address of the PC/Laptop
Replies: 5
Views: 621

I want to see MAC address of the PC/Laptop

Hi, i have put a line in the FW to track weather 'someone' is trying to use port 53 in order to send SPAM messages. add action=add-src-to-address-list address-list=53Drop17 address-list-timeout=1d chain=input comment="Deny openDNS relay" dst-port=53 in-interface=pppoe-out1 log-prefix=53_drop protoco...
by korg
Wed Dec 14, 2016 6:43 pm
Forum: General
Topic: How to? Need to allow unrestricted internet access for one certain IP (device) from Hotspot
Replies: 1
Views: 289

How to? Need to allow unrestricted internet access for one certain IP (device) from Hotspot

Hello, i need to allow to one certain device within the hotspot DHCP range.. resp one certain IP address to connect to the internet without this login page... I've read it here in one topic that i should enter something like this /ip firewall mangle add src-mac-address=<MAC here> disabled=no but.. c...
by korg
Mon Oct 03, 2016 4:05 pm
Forum: Wireless Networking
Topic: Poor speed on Wireless Repeater
Replies: 3
Views: 795

Re: Poor speed on Wireless Repeater

Thank you jarda...

maybe I should concider this...

good point on two radios... i am havig like 20 AP's connected via LAN ... and i have set them all to the same frequency in a sense to have a 'roaming' WLAN.

is that correct?

tx

korg
by korg
Mon Oct 03, 2016 1:54 pm
Forum: Wireless Networking
Topic: Poor speed on Wireless Repeater
Replies: 3
Views: 795

Poor speed on Wireless Repeater

Hi all, i have setup the connection on a 951 taking the SSID from another 951. i got immediately the connection and 'i have an internet speed' but very very poor. on the 951 from which I am taking the 'connection' is connected with LAN to the network and has BW like 750 Mb/s (both send receive). if ...
by korg
Mon Oct 03, 2016 1:50 pm
Forum: General
Topic: Mikrotik and VDSL Connection in Germany
Replies: 8
Views: 2249

Re: Mikrotik and VDSL Connection in Germany

Hi,

sorry for a late answer... i did not manage to have it operational. i have used the telekom router and have put dhcp client on a port.
by korg
Sun Jul 03, 2016 12:09 pm
Forum: Wireless Networking
Topic: Wireless Rep - DHCP issue
Replies: 6
Views: 948

Re: Wireless Rep - DHCP issue

Hi, so .. yes .. i've connected them as station bridge/ap bridge (wlan1/virtual ap) and on the other device also the same station bridge/ap bridge (wlan1/virtual ap). What i did also is that I used the same SSID for both 'parts'.. station bridge/ap bridge (wlan1/virtual ap) on both devices.  in brid...
by korg
Thu Jun 30, 2016 12:11 am
Forum: Wireless Networking
Topic: Wireless Rep - DHCP issue
Replies: 6
Views: 948

Re: Wireless Rep - DHCP issue

This is what i did... on the first 951 i defined two wlan networks: first is ap bridge and the second is station bridge and on the second 951 vice versa.. first wlan is station bridge and the second is ap bridge... 
by korg
Wed Jun 29, 2016 10:20 pm
Forum: Wireless Networking
Topic: Wireless Rep - DHCP issue
Replies: 6
Views: 948

Re: Wireless Rep - DHCP issue

No one? 

korg
by korg
Wed Jun 29, 2016 12:13 am
Forum: Wireless Networking
Topic: Wireless Rep - DHCP issue
Replies: 6
Views: 948

Wireless Rep - DHCP issue

Hi, i have connected two routers 951 (first is a Gateway.. second should be as a repeater) via wireless-rep to one another (first 951: wlan1 station pseudo/wlan2 internet - second 951 wlan1 station pseudo/wlan2 internet), have put in the second 951 in bridge wlan1, wlan2, eth2, eth3 and as dhcp-clie...
by korg
Tue May 31, 2016 11:28 pm
Forum: General
Topic: Mikrotik and VDSL Connection in Germany
Replies: 8
Views: 2249

Re: Mikrotik and VDSL Connection in Germany

Again.. many thanks!

korg
by korg
Tue May 31, 2016 5:46 pm
Forum: General
Topic: Mikrotik and VDSL Connection in Germany
Replies: 8
Views: 2249

Re: Mikrotik and VDSL Connection in Germany

Thanks a lot...

Do you know maybe does T COM Deutschland uses VLAN 7 resp. do i need to set it up manualy in the MT or does the VDSL Modem does that?

tx

korg
by korg
Tue May 31, 2016 11:14 am
Forum: General
Topic: Mikrotik and VDSL Connection in Germany
Replies: 8
Views: 2249

Mikrotik and VDSL Connection in Germany

Hi, i need to connect a Mikrotik 850Gx2 with german VDSL connection with Annex J via PPPOE connection. Is it possible to get mikrotik connected to 'any' VDSL Annex J modem with PPPOE connection like .. for example with Annex B? is it like... i enter user: 81747372734732742#t-online.de pass.. as it i...
by korg
Wed Apr 27, 2016 9:57 am
Forum: General
Topic: Rapidgator and proxy settings
Replies: 2
Views: 2305

Re: Rapidgator and proxy settings

No one?

:(

korg
by korg
Tue Apr 26, 2016 4:16 pm
Forum: General
Topic: Rapidgator and proxy settings
Replies: 2
Views: 2305

Rapidgator and proxy settings

Hello, I have activated proxy on my 951ui, and have added for ip -web proxy - access *rapidgator.net* host (in order to 'avoid' proxy) but everytime i try to download something from rapidgator (for example i am clicking on a link like this... http://rapidgator.net/file/60824e3ba6799a68c49913df3e6fa7...