Hi, I currently have a setup like this: Ether1 - IPMPLS Lan (Intercompany traffic) Ether2 - LAN Ether3 - Antenna (INTERNET) All traffic from LAN(192.168.1.0/24) to Public IP in my Core are routed using Ether1. I have done a Mangle as such: - mark routing - prerouting - src addr (192.168.1.0/24) - De...

Thank you,

I just left the Office.

I’ll test it tomorrow.

I have assymetric routing because if I do a Download and Upload speetest using fast.com. I’ll see on Router 1 only see Upload Traffic flowing in the IPIP and Download traffic will flow on ether4 while IPIP is 0 kbps.

Router 1: (192.168.1.1)
0.0.0.0/0 192.168.2.1
10.0.1.0/24 192.168.2.6

Router 2: (10.0.1.150)
0.0.0.0/0 10.0.1.151
192.168.1.0/24 10.0.1.151

Router 3: (10.0.1.151)
0.0.0.0/0 196.xxx.xxx.xxx (IP Gateway Internet)
192.168.1.0/24 192.168.2.6

Hi,

Added IPs and some comments about Physical Link or IPIP Tunnel.

If there is any question let me know.

Hi, I'm having some issue trying to route a specific subset of traffic between 3 routers using an IPIP Tunnel. I would like for Traffic from LAN on Router 1 to go trough the IPIP Tunnel for Internet. Some traffic goes to the IPIP Tunnel and the other comes back trough the Physical Link. I did some t...

Hi,

In my company I have 3 APs for SSID (Company) and 2 for SSID (Company-guest).

How in Capsman can I tell the APs that Company ones will go against an Access List and guest ones anyone can connect ?

Hi, I'm trying to run an Open VPN Server alongside my already running SSTP Server in the Mikrotik 450G. I tried this tutorial: https://systemzone.net/mikrotik-openvpn-setup-with-windows-client/ I'm getting an error on OpenVPN about Certificate verification error, like a mismatch. I tried creating ne...

I factory-reseted a 450G which my ISP used as CPE.

I updated to the latest version some days ago, 6.35.2.

When trying to login to WebFig it seems to be broken and with a different design (See screenshot).

Can I reinstall webfig ?

I'm trying to set a IPIP Tunnel over an already running IPIP Tunnel but it isn't working. Mik1 ------(Tunnel) Mik2 -----(Route to Mik3) Mik3 There is an IPIP Tunnel Between Mik1 and Mik2 and I would like to set one between Mik1 to Mik3 but it isn't working. I cannot ping Mik3 with the new Tunnel I c...

Hi, Sorry for the misunderstanding. This is the diagram: Mikrotik --- Fortigate --- Internet --- 192.168.1.6 (Fortigate) remote site Both are on the same LAN: Port 1 to Fortigate Port 2 is LAN Both are in a bridge. Mikrotik is 10.0.1.1 Fortigate 10.0.1.6 I have a static route as following: Dst Addre...

I would like to use a static route as the default gateway but I'm getting unreachable. Scenario 10.0.1.0/24(LAN) ---- Mikrotik .1 ----- .6 FortiGate Router I created a static route Dst Address 192.168.1.1 Gateway 10.0.1.6 I would like the 192.168.1.1 to be the Default Gateway (0.0.0.0/0) but I get u...