Community discussions

MikroTik App

Search found 35 matches

by learnyee
Thu Aug 04, 2022 9:23 am
Forum: Announcements
Topic: v7.4 [stable] is released!
Replies: 226
Views: 55248

Re: v7.4 [stable] is released!

those who runs Site to Site IPSEC VPN with Microtik device as their edge device, please stay away from this version. I had quite a numbers of old RB2011, HEX and some Fortigate firewall used to connected to my CCR1009 running on v6.48, everything is running fine without a single issue for ages, once...
by learnyee
Mon Jun 14, 2021 8:12 pm
Forum: General
Topic: Next-hop and NAT
Replies: 4
Views: 1355

Re: Next-hop and NAT

alright bro, that is clear and straight forward. Thanks for the help. Would test your solution on it soon


Lee
by learnyee
Mon Jun 14, 2021 10:59 am
Forum: General
Topic: Next-hop and NAT
Replies: 4
Views: 1355

Re: Next-hop and NAT

If you don't need any filtering of traffic between different subnets (which would require firewall rules), then you don't need 4 VLANs on the connection between mikrotik and fortigate. Instead you should use fifth subnet for that connection. It can have longer subnet mask if you wish, e.g. 192.168....
by learnyee
Mon Jun 14, 2021 7:42 am
Forum: General
Topic: Next-hop and NAT
Replies: 4
Views: 1355

Next-hop and NAT

alright I had a network that require consolidation/revamp. assume I have 4 subnet, 192.168.0.0/24, 192.168.1.0/24, 192.168.2.0/24 and 192.168.3.0/24 all connected to Eth1-4 on a mikrotik device, with all the GW of individual subnet of 192.168.x.254/32 The Eth5 of this mikrotik device then connect to...
by learnyee
Mon Apr 22, 2019 4:29 pm
Forum: General
Topic: Any plans for SD WAN?
Replies: 21
Views: 24110

Re: Any plans for SD WAN?

I'm using Mikrotik. The Cisco doc just explains it really well. In my situation I configured the HA or SDWAN mikrotik router and then connected their existing Mikrotik router to it. I just assumed the gateway position and was in between the ISP connections and their router. HA - SDWAN Router Ether1...
by learnyee
Sat Feb 02, 2019 5:54 pm
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

1 last question, because your website is non-english, I am wondering upon purchasing the program, is the license granted to be used in 1 terminal only or I can use the same license code in multiple terminal/customer?
by learnyee
Thu Jan 31, 2019 12:46 pm
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

To run it directly without installing the service you must use: hotspotauto.exe -run The executable is a service wrapper so calling it without params will not do anything. If you want to run it directly from java.exe you'll have to declare all dependencies manually on the command line. If you want ...
by learnyee
Thu Jan 31, 2019 12:42 pm
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

ok it works now but I observe the following problem: when it was importing from your file, the import process just kinda hang half way for some error. This happen when there are already some pre-generated users inside the user manager, the only way to resolve it is to remove all users then the impor...
by learnyee
Thu Jan 31, 2019 11:42 am
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

it seems the error started at "Injection of autowired dependencies failed". Alright basically there is nothing much I can do now. I would suggest you to get a freshly installed PC to try run that, if it works, let me know what I should do next.
by learnyee
Thu Jan 31, 2019 11:35 am
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

ok I had retry running the program as your instruction, the HotspotAuto.exe way doesnt seems to show anything at all, even the log is not generating at all. I run it with the command line java -jar HotSpotAuto-1.0.jar, still the same.
by learnyee
Thu Jan 31, 2019 11:26 am
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

I just double click on the jar file to run it
by learnyee
Thu Jan 31, 2019 10:30 am
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

hotspotauto.log
ok, getting tons of error.....do I need a specific version of J2RE to run?
by learnyee
Mon Jan 28, 2019 7:51 pm
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

ok got the file, will do some test later today. just a quick question, after you do the query from external DB and had the result, before you write those lines into the user manager DB, do you do a comparison whether the existing username already exist in the user manager? E.g. in the existing Userm...
by learnyee
Mon Jan 28, 2019 12:43 pm
Forum: The User Manager
Topic: Generate User Manager users from an external data base
Replies: 16
Views: 15910

Re: Generate User Manager users from an external data base

ok tried to download from the mentioned site but apparently there is no link on the file. Can help?
by learnyee
Sun Dec 23, 2018 10:13 am
Forum: General
Topic: Wishlist for the new version of RB2011
Replies: 1
Views: 646

Wishlist for the new version of RB2011

there are many good points about the current RB2011 which makes it a device I carry in my backpack all the time for onsite usage or testing/configuration purposes, some of these good points are: 1. Good form factor 2. LCD screen, I can always see whether my WIFI bridge is connected or not 3. Tons of...
by learnyee
Fri Sep 14, 2018 6:49 am
Forum: Announcements
Topic: Newsletter #84
Replies: 47
Views: 31548

Re: Newsletter #84

I wish the LCD panel still there for the 4011 and the antenna is detachable, then I can just carry that around....
by learnyee
Sat Aug 18, 2018 4:57 pm
Forum: Beginner Basics
Topic: Tag vlan or forward traffic to port or VLAN based on IP
Replies: 2
Views: 884

Re: Tag vlan or forward traffic to port or VLAN based on IP

Why dont you tag the Vlan on the U port on ONU we cant do that simply because there is a dumb poe switch sitting between the OLT and the ONU. And we cannot change those switches because the customer refuse to pay for extra for a VLAN aware switch. So we had no choice but to look at is there a way o...
by learnyee
Thu Aug 16, 2018 2:04 pm
Forum: Beginner Basics
Topic: [Wiki] Mikrotik Telekom Malaysia UniFi Setup Guide
Replies: 18
Views: 10805

Re: [Wiki] Mikrotik Telekom Malaysia UniFi Setup Guide

Hi Soon Wai, Thank you for this guide. I have successfully configured my Mikrotik HEX POE router using you guide. However i am having difficulties trying to get the voip phone on the maxis router to work. I have configured the HEX POE router as my primary router and the Maxis router as secondary. D...
by learnyee
Thu Aug 16, 2018 1:50 pm
Forum: Beginner Basics
Topic: [Wiki] Mikrotik Telekom Malaysia UniFi Setup Guide
Replies: 18
Views: 10805

Re: [Wiki] Mikrotik Telekom Malaysia UniFi Setup Guide

hello thank you for your guide. i have successfully change my unifi modem with mikrotik rb750r2. please guide me to add vlan on port 2-5. i'm not using iptv. i have follow this post but no luck. tq. https://forum.mikrotik.com/viewtopic.php?t=86635 if port 2-5 work like a switch, then you just creat...
by learnyee
Thu Aug 16, 2018 1:46 pm
Forum: Beginner Basics
Topic: [Wiki] Mikrotik Telekom Malaysia UniFi Setup Guide
Replies: 18
Views: 10805

Re: [Wiki] Mikrotik Telekom Malaysia UniFi Setup Guide

Hi soonwai, This is Mastor from Nichia Malaysia. I purchased MikroTik hEX router to replace standard DIR-615 Unifi router. I followed all your setup for Unifi and it can work perfectly. But our Unifi package comes with 5 Fixed IP addresses whereby one IP is assigned at the gateway and the other 4 w...
by learnyee
Thu Aug 16, 2018 1:18 pm
Forum: Beginner Basics
Topic: Tag vlan or forward traffic to port or VLAN based on IP
Replies: 2
Views: 884

Tag vlan or forward traffic to port or VLAN based on IP

ok, I had been looking high and low for this but seems cant really find a way doing this. I had couple of CCR with the 10G port, which is connected to a PON (OLT) uplink, which connects to hundreds of SIP phone and WIFI AP. The issue now is these devices was not VLAN aware as there are some intermed...
by learnyee
Thu May 10, 2018 4:49 pm
Forum: General
Topic: Need Help on NAT on WAN link with Multiple Public IP
Replies: 17
Views: 5113

Re: Need Help on NAT on WAN link with Multiple Public IP

If router has public ip of 1.1.1.2/24 on its “WAN” interface and you have been given public addresses 2.2.2.0/29 (the “WAN” address is irrelevant to you as the isp only uses it to route to your subnet) Create bridge (effectively LAN side of your router) with ip 2.2.2.1/29 Connect servers to what wo...
by learnyee
Thu May 10, 2018 4:42 pm
Forum: General
Topic: Need Help on NAT on WAN link with Multiple Public IP
Replies: 17
Views: 5113

Re: Need Help on NAT on WAN link with Multiple Public IP

If the final addresses are public then you don’t need NAT. The “LAN” devices simply become static IP routing through the routers “LAN” address. erm...dont quite get that. how do you route through the router without any NAT as all the server has the internal IP, sitting behind the LAN Interface, and...
by learnyee
Thu May 10, 2018 4:35 pm
Forum: General
Topic: Need Help on NAT on WAN link with Multiple Public IP
Replies: 17
Views: 5113

Re: Need Help on NAT on WAN link with Multiple Public IP

/ip firewall nat add action=src-nat chain=srcnat src-address=<internal server 1> to-addresses=1.2.3.x1 add action=src-nat chain=srcnat src-address=<internal server 2> to-addresses=1.2.3.x2 add action=src-nat chain=srcnat to-addresses=1.2.3.x5 comment="everything else not covered by previous ru...
by learnyee
Tue May 08, 2018 4:23 am
Forum: General
Topic: Need Help on NAT on WAN link with Multiple Public IP
Replies: 17
Views: 5113

Re: Need Help on NAT on WAN link with Multiple Public IP

If the final addresses are public then you don’t need NAT. The “LAN” devices simply become static IP routing through the routers “LAN” address. erm...dont quite get that. how do you route through the router without any NAT as all the server has the internal IP, sitting behind the LAN Interface, and...
by learnyee
Mon May 07, 2018 5:41 pm
Forum: General
Topic: Need Help on NAT on WAN link with Multiple Public IP
Replies: 17
Views: 5113

Need Help on NAT on WAN link with Multiple Public IP

ok I am currently working on a case with a WAN link with Multiple Public IP, e.g. 1.2.3.x/29, which I would end up with 1.2.3.x1-1.2.3.x5 usable public IP. Now I need to: 1. DEST Port NAT traffic from 0.0.0.0/0 to 1.2.3.x1 port 80, 443 to an Internal Server IP 2. All full IP DEST NAT Traffic from 0....
by learnyee
Mon May 07, 2018 5:29 pm
Forum: General
Topic: approximating wifi "reach" (how many AP's to install)
Replies: 11
Views: 2386

Re: approximating wifi "reach" (how many AP's to install)

based on my experience, if you need to have bigger coverage, get those with the "H" mark (high powered), e.g. RB951-2Hnd, and avoid those Lite model. A single, RB951-2Hnd basically can cover an open area as huge as 45ft x 60ft (or more or less around that) and you would still get half the ...
by learnyee
Sun Apr 08, 2018 6:18 pm
Forum: General
Topic: Mikrotik Rack-mounted Devices Visio Stencils
Replies: 58
Views: 91601

Re: [ATTACHED] Mikrotik Rack-mounted Devices Visio Stencils

there you go the AHx4...take note that you need to manually import this into Visio and the font type used is about the look of the actual wordings.
by learnyee
Mon Sep 04, 2017 11:07 am
Forum: Wireless Networking
Topic: WAP AC vs HAP AC
Replies: 4
Views: 3600

Re: WAP AC vs HAP AC

Omni is 5GHz only. hAP AC is 2.4 and 5 GHz. Lernyee, do you need internal or outdoor device ? Indoor. I am building a 3 x WIFI AP for a 3 floor building, and what I planned was using the RB260GSP<-(POE)->hAP AC or RB260GSP<-(POE)->hAP<-(POE)->wAP AC The reason of using the RB260GSP is I need a VLAN...
by learnyee
Sun Sep 03, 2017 4:50 pm
Forum: Wireless Networking
Topic: WAP AC vs HAP AC
Replies: 4
Views: 3600

WAP AC vs HAP AC

I am in the midst of deciding between these 2 device, for the usage of WIFI AP. Let's take away the factors of cost, number of GBit Interfaces and the processing power of the unit, and under optimum circumstances, which unit would had the larger WIFI coverage? I used to setup the WIFI AP using the R...
by learnyee
Tue Jun 20, 2017 9:10 pm
Forum: General
Topic: mmAP & WAP AC Bricked when Firmware Update to 6.39.2
Replies: 0
Views: 982

mmAP & WAP AC Bricked when Firmware Update to 6.39.2

Ok this happened in both my mAP & WAP AC. What happened: 1. Whenever I received a new unit, I would 1st upgrade it with firmware version 6.38.5, by manually downloading the routeros-mipsbe-6.38.3.npk and all_packages-mipsbe-6.38.3.zip, and transfer it to the router using WinBox 2. During the tra...
by learnyee
Sun Nov 13, 2016 6:49 pm
Forum: Beginner Basics
Topic: Need help-replacing Peplink Load balancer with Mikrotik-Part2
Replies: 1
Views: 1009

Need help-replacing Peplink Load balancer with Mikrotik-Part2

Drawing1.jpg ok, I actually posted previously on the similar topic but I had got myself into more issue since then. http://forum.mikrotik.com/viewtopic.php?f=13&t=114418 The RB951 essentially was a peplink configured as drop-in mode (meaning the IP:175.x.x.124 is the peplink IP, as replaced by ...
by learnyee
Fri Nov 11, 2016 9:24 pm
Forum: Forwarding Protocols
Topic: PCC & NTH Qestion
Replies: 0
Views: 1143

PCC & NTH Qestion

ok, I know this is a beaten to death topic as there are many question on it but I need some help still. I am trying to setup a load balancing for 2 WAN link, 10Mbps + 3Mbps (it is odd, I know) and I need to use PCC to have persistent HTTPS connection (meaning same WAN out all the time for a session ...
by learnyee
Tue Nov 08, 2016 10:23 am
Forum: Beginner Basics
Topic: Need help-replacing Peplink Load balancer with Mikrotik
Replies: 1
Views: 1398

Need help-replacing Peplink Load balancer with Mikrotik

alright, current config: WAN1 (drop in) + WAN2 (PPOE) <-> Peplink <-> Firewall The peplink is configured as a drop-in meaning that the WAN1 IP (175.xxx.x.124/29) is actually sitting on the peplink and the firewall is connect to the peplink with IP:175.xxx.xxx.123. There are several public IP assigne...
by learnyee
Fri May 20, 2016 9:59 pm
Forum: Beginner Basics
Topic: Getting really confuse - Swith vs Bridge
Replies: 0
Views: 711

Getting really confuse - Swith vs Bridge

I came from the environment using routers and firewalls from Cisco, Juniper and Checkpoint. Recently I had bought a unit of RB2011UiAS-2HnD-IN & CRS125-24G-1S-RM for testing purposes. Read through the wiki and google, and I started to get real confuse with the term "Layer 3 switch", es...