Community discussions

MikroTik App

Search found 130 matches

by ubikrotik
Mon Jul 20, 2020 2:53 am
Forum: General
Topic: RB4011 and RB1100 AHx4 "bricks" randomly
Replies: 156
Views: 31357

Re: RB4011 and RB1100 AHx4 "bricks" randomly

Hi, we have about 100 rb4011 deployed in our network.

THIS PROBLEM suck a lot you now that?


MIKROTIk team do you have a fix for us.?
by ubikrotik
Mon Feb 11, 2019 2:49 am
Forum: General
Topic: crs125-24g strange problem...
Replies: 3
Views: 760

Re: crs125-24g strange problem...

i guess, but the same config work in my crs112, but not in my crs125
by ubikrotik
Sun Feb 10, 2019 4:27 am
Forum: General
Topic: crs125-24g strange problem...
Replies: 3
Views: 760

crs125-24g strange problem...

hi, This is my setup : 1 x rb960pgs running ospf, vlan, mpls, vpls and at peak hour +- 90 mbps max this router is connected to a crs125-24g switch. Then we add vlan into that switch for ospf legs and APs. If i ping from the rb960 to the switch i get +-3% of lost. (so my ospf goes crazy and break) I ...
by ubikrotik
Sat Jan 12, 2019 2:51 am
Forum: RouterBOARD hardware
Topic: rbm33g and m.2 slot problem
Replies: 2
Views: 1009

rbm33g and m.2 slot problem

I received my rbm33g today. I tried to install a KingDian m.2 32gb NGFF ssd to the m.2 pcie slot but it doesnt work. I cant see the drive appear in /system/disk/. if i try a sd card it works like a charm. But the ssd never appear. What do i do wrong?
by ubikrotik
Wed Nov 07, 2018 6:23 pm
Forum: RouterBOARD hardware
Topic: ccr1036 board voltage
Replies: 1
Views: 752

ccr1036 board voltage

what is the dc power range for the ccr1036 board itself?

The actual powersupply is a 120/24vdc but I need to power it with a 28vdc source. Will the board accept this higher voltage?
by ubikrotik
Sat May 26, 2018 6:47 pm
Forum: Forwarding Protocols
Topic: understanding packets flow
Replies: 2
Views: 1174

Re: understanding packets flow

Hoo, I found : Condition -1 PC1 -192.168.1.5 PC2 192.168.1.3 Condition -2 PC1 192.168.1.5 PC2 192.168.2.3 Condition-1 When PC 1 one want o send packet to PC 2 it will first check for Source and Destination MAC as all Communication happens at Layer 2 or Data Link layer happens at MAC . Source MAC add...
by ubikrotik
Sat May 26, 2018 6:42 pm
Forum: Forwarding Protocols
Topic: understanding packets flow
Replies: 2
Views: 1174

understanding packets flow

noob question sorry : For exemple, my laptop want to reach www.google.com web site. How does packets flow from the pc to the Google's servers? Realy basic exemple : src :192.1y68.0.10 dst : 8.8.8.8 router : lan2 to lan5 in bridge lan 1 is our wan port. packet leave my computer lan card, then hit the...
by ubikrotik
Thu May 24, 2018 6:35 am
Forum: Forwarding Protocols
Topic: MPLS LDP neighbor problem
Replies: 4
Views: 3358

Re: MPLS LDP neighbor problem

same problem here. Any update about this?
by ubikrotik
Thu May 24, 2018 5:26 am
Forum: Forwarding Protocols
Topic: MPLS + LDP Logging
Replies: 12
Views: 3273

Re: MPLS + LDP Logging

And what about now? Still nothing?
by ubikrotik
Tue May 22, 2018 3:33 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

I have noticed hat LDP neighor of the next hops diapear and come back after 10 sec..


so the vpls interface disconnect from the router. Is there a way no troubbleshoot that behavior? LDP and MPLS on loggin dont work. FW : 6.4.1
by ubikrotik
Tue May 15, 2018 5:35 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

we have a simple path here on our network : main router ----- af5x--------af5x---------router2--------ap---------cpe. There is a vpls from main router to rtouter#2 and still have lost packets. If I ping the router2 from the main router. Everything is good, no more latecy, no more packet lost. On of ...
by ubikrotik
Tue May 15, 2018 4:55 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

wow.




We have airfiber, prism radios and we still see some packet lost in vpls and higher latency then outside vpls tunnel. I think mpls/vpls was a bad bad move.
by ubikrotik
Tue May 15, 2018 4:35 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

NickOlsen, your ubnt post looks like the exact same problem that i have. Did you find any fixe for this situation?
by ubikrotik
Tue May 15, 2018 3:43 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

I will try it tommorrow!


Not just my ICMP ping affected. Voip and gaming to. I never had this issue before with my old statics routes.



thx.
by ubikrotik
Mon May 14, 2018 5:48 pm
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

to the main router, all vpls are bridged together. We set split horizon value to 1 for all vpls interfaces. But yes they are in the same bridge.


Yes traffic crossing ubiquiti wireless links.
by ubikrotik
Mon May 14, 2018 5:45 am
Forum: Forwarding Protocols
Topic: VPLS leaking interface
Replies: 8
Views: 1141

Re: VPLS leaking interface

I also noticed that:

when I run Torch tool to specific VPLS interface I can see traffic comming from an other VPLS interface to dst internet side like I explain before. One other thing that I found today is that RX is always 0 bps but Tx is higher (+512 bps).
by ubikrotik
Sun May 13, 2018 4:18 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

we registered higher max latency when pingging devices that need to pass through VPLS.

and a lot of link down as well.


But once again. the pysical link is good since I have 0 packet lost from the main router to the tower's router.
by ubikrotik
Sun May 13, 2018 4:14 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

Re: packets lost inside VPLS but not outside

You need to problem shoot all links between the VPLS sites. Do you use MPLS? - have you checked your l2mtu on all links? Its not common to drop packed in a VPLs, and not a regular ICMP ping or something like this. Is there anny different in recived packed MPLS compared to ICMP? - IF ICMp is good - a...
by ubikrotik
Sat May 12, 2018 7:52 pm
Forum: Forwarding Protocols
Topic: VPLS leaking interface
Replies: 8
Views: 1141

Re: VPLS leaking interface

mmm, not sure,

for exemple
scr: 10.10.10.100 (cpe of an other vpls)
dst: 66.75.26.58 (internet address)
by ubikrotik
Sat May 12, 2018 3:52 pm
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

Hey guys i think its now fixed. Since this monday, i removed the switch and installed the lastest version in my af5x. No more drops/down. if it come back again I will let you know[emoji2] thank you very much for your help.!!! there is an other issue in our network now. If you want to take a look[emo...
by ubikrotik
Sat May 12, 2018 5:34 am
Forum: Forwarding Protocols
Topic: VPLS leaking interface
Replies: 8
Views: 1141

Re: VPLS leaking interface

If they are in same l2 domain, you can try to ping host in different VPLS. Dump it and see what you got.
not working. I cant ping from different VPLS interface.
by ubikrotik
Sat May 12, 2018 5:29 am
Forum: Forwarding Protocols
Topic: VPLS leaking interface
Replies: 8
Views: 1141

Re: VPLS leaking interface

I dcided to creat an other post for the second problem.
by ubikrotik
Sat May 12, 2018 5:28 am
Forum: Forwarding Protocols
Topic: packets lost inside VPLS but not outside
Replies: 16
Views: 1969

packets lost inside VPLS but not outside

we have a problem. We have multiple tower connected in a WISP. OSPF/MPLS/VPLS. This is strange, we lost packets inide vpls but not outside: for exemple : rt1 to rt2 = /29 rt2 to rt3 = /29 and so.... if i launch a ping from rt1 to rt3 there is no packets lost. That mean that the physical link is good...
by ubikrotik
Fri May 11, 2018 3:09 pm
Forum: Forwarding Protocols
Topic: VPLS leaking interface
Replies: 8
Views: 1141

Re: VPLS leaking interface

Maybe it's VPLS management signaling packets? You should dump this and watch in a wireshark. Also, check all interfaces have the same horizon value. And make sure you have latest ROS version. yes they have the same horizon value. All set to 1. routeros and routerboard == 6.4.2 yes i'm not familiar ...
by ubikrotik
Fri May 11, 2018 2:48 pm
Forum: Forwarding Protocols
Topic: VPLS leaking interface
Replies: 8
Views: 1141

VPLS leaking interface

Hi, we have 2 problems here that we can't find the source. we have a network running ospf/mpls/vpls. In the main router there are 30 VPLS interfaces. each interfaces have horiszon value set to 1. They are in the same bridge. When i run torch tool on specific interface, sometime I can see traffic com...
by ubikrotik
Fri May 11, 2018 5:03 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

and should i use auto isolate (port setting)?

Envoyé de mon Pixel XL en utilisant Tapatalk

by ubikrotik
Fri May 11, 2018 4:59 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

yes this is default /bridge/stp

protocol mode : rstp

on all bridge. should i use none?

Envoyé de mon Pixel XL en utilisant Tapatalk

by ubikrotik
Fri May 11, 2018 4:57 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

10.10.10.4 is the switch - what kind of switch=? Doeas it use rstp? . Then dissable it on all devices. You dont need it if you have control to your networkm and ypu dont have loop.
crs112


rstp? not sure?

Envoyé de mon Pixel XL en utilisant Tapatalk

by ubikrotik
Thu May 10, 2018 1:57 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

well, I can share to you the diagram. But this is really simple. our main router has a cable that is connected to an airfiber. At the other end, we have the remote airfiber, a cable, a switch a cable and the router #2. /29 for all of this devices eg: 10.10.10.1 is the main router 10.10.10.2 is the f...
by ubikrotik
Tue May 08, 2018 6:25 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

exactly, and also unable to reach the remote PTP radio. But it's still up and running because, when i'm logged in the first PTP radio, I can see the other one running and connected. The link uptime does not reset too. So im sure that the PTP link is good without any problems. We tried NBMA without s...
by ubikrotik
Mon May 07, 2018 5:08 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

It's hard to say. When it happens I don't have enough time to remote acces my main router and do that. The only thing I can say, is that I can't ping the remote router from the main router. (of course if ospf is down). My wireless link Is very stable and strong. No worries about the link. any idea :S?
by ubikrotik
Fri May 04, 2018 2:15 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

we also tried authentification to simple. no cha ges.

Envoyé de mon Pixel XL en utilisant Tapatalk

by ubikrotik
Fri May 04, 2018 2:14 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

broadcast do the same. thats why we switch to ptp.

Envoyé de mon Pixel XL en utilisant Tapatalk

by ubikrotik
Wed May 02, 2018 7:29 pm
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

Re: OSPF full to down for no reason?

yes, routeros and routerboard have the latest fw.

in every routers i can see all of my lsa and neighbors. hello, dead interval are set to default. i got a new log last days :


OSPF - init bit set in middle of an exchange
by ubikrotik
Sat Apr 28, 2018 5:01 am
Forum: Forwarding Protocols
Topic: OSPF full to down for no reason?
Replies: 23
Views: 4035

OSPF full to down for no reason?

Hi, We have an issue with OSPF. OSPF : interfaces network type PTP CCR1009 ---- AF5x#1 ---- AF5x#2 ---- CRS125 ---- RB960 10.10.10.0/29 Netwatch pinging : AF5x#1 AF5x#2 RB960 RB and CRS == V6.4.1.4 CCR == V6.4.2 AF5x == V3.2.3 AF5x = never had issues since at least 1 year. Only since OSPF is running...
by ubikrotik
Sat Mar 31, 2018 5:27 am
Forum: The Dude
Topic: Dude v6 - Feature request list
Replies: 78
Views: 36398

Re: Dude v6 - Feature request list

Graphs :



Need average rate when scrolling from minutes to all.


It can be helpfull.


thx
by ubikrotik
Thu Mar 29, 2018 5:14 pm
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 26
Views: 16099

Re: Dude - Device RouterOS on no-standard Port

any update here?


My winbox port is now 28291, I cant connecte the dude to routerOS service.
by ubikrotik
Thu Mar 29, 2018 2:29 am
Forum: Announcements
Topic: Urgent security advisory
Replies: 110
Views: 103206

Re: Urgent security advisory

hi all,

We are running our main router on 6.37.1 (stable). This is a CCR1009. What happens if I upgrade to the current? I know master port will be disabled and A bridge will be created. And also P2P in firewall will no longer work.


Anything else?
by ubikrotik
Mon Mar 26, 2018 6:04 am
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 12336

Re: script send email as user login into routerboard

i realized that there is not much information when it stored to the disk. So the solution is not very usefull.
by ubikrotik
Mon Mar 26, 2018 12:03 am
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 12336

Re: script send email as user login into routerboard

yes, just creat a new action under logging like our friends said in this post. But instead of email the rule, store it to the disk. Now I would like to email this file only if it's new (maybe by looking at ''creation date'') Actually I run both, email when rule is triggered it send an email, plus, s...
by ubikrotik
Sun Mar 25, 2018 11:01 pm
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 12336

Re: script send email as user login into routerboard

I have a new way to do that without full script.

Is it possible to send by eamil only new files once written?
by ubikrotik
Sun Mar 25, 2018 10:37 pm
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 12336

Re: script send email as user login into routerboard

thanx i just did it. i just have to select in topics "critical" and put to prefix "login failure".
very nice without script!
Also working fine, but there is no body and subject :(
by ubikrotik
Sun Mar 25, 2018 10:35 pm
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 12336

Re: script send email as user login into routerboard

I made the script for you.... :) Schedule that script every appropriate time, like 10 seconds? Syntax is for RouterOS 6.7+ :log info message=("Start Check Failed Login"); :local currentLoginFailureArray value=[/log find where message~"login failure"]; :if ($currentLoginFailureArray != $previosLogin...
by ubikrotik
Sun Mar 25, 2018 8:38 pm
Forum: General
Topic: notify us when someone try to log into a router
Replies: 2
Views: 760

Re: notify us when someone try to log into a router

Hey thank you very much my friend! 8) 8) 8)


@JB172
by ubikrotik
Sun Mar 25, 2018 4:20 am
Forum: General
Topic: notify us when someone try to log into a router
Replies: 2
Views: 760

notify us when someone try to log into a router

Is there a way to know by email when someone try to log into a router?

for exemple,I would like to be notify if someone try to log into my router with bad credentials.


is it possible by using a script?
by ubikrotik
Mon Mar 19, 2018 12:32 am
Forum: Scripting
Topic: email script doesn't work, but test email
Replies: 3
Views: 735

Re: email script doesn't work, but test email

Stupid compiler :S:S:S loll


it works. Thank you very much.
by ubikrotik
Sun Mar 18, 2018 9:44 pm
Forum: Scripting
Topic: email script doesn't work, but test email
Replies: 3
Views: 735

Re: email script doesn't work, but test email

i'm running 6.41.3
by ubikrotik
Sun Mar 18, 2018 9:17 pm
Forum: Scripting
Topic: email script doesn't work, but test email
Replies: 3
Views: 735

email script doesn't work, but test email

hi,



tool/email
send email (for test purposes)
Everything is fine, email sent as supposed



But When i run a simple test email script nothing happens.

here is my script:
/tool e-mail send 
to="myemail@domain.com"
subject="test"
body="test"

any idea?
by ubikrotik
Tue Feb 27, 2018 4:17 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 56770

Re: wAP 60G experience

mesh implement in the future?
by ubikrotik
Wed Feb 14, 2018 5:54 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 56770

Re: wAP 60G experience

Not realy, urban deployment. from neighbors to neighbors.
not for backhauling.
by ubikrotik
Sat Feb 10, 2018 11:06 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 56770

Re: wAP 60G experience

MESH wap 60 possible in the future? Sounds like more appropriate for this band. Short range, large spectrum space. What do you think ?
by ubikrotik
Mon Dec 04, 2017 5:38 am
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

not sure, you suggest to make lower queue size for voip? Priority already set to 1 for voip an 8 for generic data.
by ubikrotik
Wed Nov 29, 2017 4:01 am
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

p2p option was capturing lots of false positives, so it was removed, i suggest to get rid of any configuration that uses those options.
no I don't use p2p


Bigger Queue size fix my problem.
by ubikrotik
Mon Nov 27, 2017 4:59 am
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

no more dropped packets. I'm trying queue size to 1000 pckts.
by ubikrotik
Sun Nov 26, 2017 4:18 am
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

thank you

@checito
@stoser

for helpfull comment. I though that smaller pkts help voip for low jitter and less delay. Ill give it a try and post results here.
by ubikrotik
Sat Nov 25, 2017 10:01 pm
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

50 to 5000 , are you talking about bucket size?
by ubikrotik
Sat Nov 25, 2017 4:46 pm
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

please see the code and the picture : https://docs.google.com/document/d/e/2PACX-1vS4Th2WC8AaH4J_umCVInZ7ZKYk7APwFvjbaW0qYg7WG6zckPZeFiUVRT3X-W7KWSuAIXjt0putyJ8C/pub Not a very usefull picture ... You could at least have enlarged the column widths so that the statistics could be read. Too many "......
by ubikrotik
Fri Nov 24, 2017 6:01 pm
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

As you can see, SIP-VOIP child queue has dopped packets and that is normal since I maxed it earlier. But RTP-VOIP is not normal. IT's actualy impossible to max this cap, since I only have 10 voip phone here. 80kbs x 10 != 10M or more.
by ubikrotik
Fri Nov 24, 2017 5:57 pm
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

please see the code and the picture :



https://docs.google.com/document/d/e/2P ... utyJ8C/pub
by ubikrotik
Fri Nov 24, 2017 4:05 am
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Re: Simple queue drop question

no body?
by ubikrotik
Wed Nov 22, 2017 5:02 am
Forum: General
Topic: Mark packages for VoIP and QoS
Replies: 1
Views: 1040

Re: Mark packages for VoIP and QoS

hello, you sould mark the new conn at first , then mark the packet in this conexion to save cpu usage. then add queue for maked packet.

hope this help
by ubikrotik
Sun Nov 19, 2017 10:09 pm
Forum: General
Topic: Simple queue drop question
Replies: 18
Views: 2919

Simple queue drop question

Hi, I made something simple in my network. I made A queue for a specific ip followed by 2 child queue. The Parent is set to 50 MBPS up and down . Voip child queue to 2mps up and down Another child queue for other trafic. Wich is set to 45M up and down. I made a simple mangle rule to identify voip da...
by ubikrotik
Tue Nov 14, 2017 3:38 pm
Forum: Wireless Networking
Topic: looking for the best wifi router (ISP)
Replies: 9
Views: 2926

Re: looking for the best wifi router (ISP)

backhaul are airfiber (ubiquiti)

AP are airprism + hor 30deg 18dbi (rf element)

CPE are litebeam AC or Powerbeam AC

20mhz width, but we only install client in 5km far from the AP to keep 8x modulation and Good CINR.
by ubikrotik
Mon Nov 13, 2017 7:12 pm
Forum: General
Topic: mark packet in a switch possible?
Replies: 5
Views: 975

Re: mark packet in a switch possible?

thx for fast reply, In layer 2, What can I do roughly to make voip quality better using mikrotik gears? For exemple, I have 1 client with a 941 router and 1 x ATA cisco SPA112. That goes to A 750upr2 (switching mode) follow a crs112 switch then to my ccr1009 that is connected to my internet provider...
by ubikrotik
Mon Nov 13, 2017 5:47 pm
Forum: General
Topic: mark packet in a switch possible?
Replies: 5
Views: 975

Re: mark packet in a switch possible?

thank you.


Need I consider VLAN in my network? Make voip trafic in vlan would help Quality (voice cutting, delay, etc.) Am I right?

Some engineer here told me that there is almost no effect on voice quality, VLANs only make it more secure and easier for trouble shooting. I'm a bit confused.
by ubikrotik
Mon Nov 13, 2017 3:35 pm
Forum: Wireless Networking
Topic: looking for the best wifi router (ISP)
Replies: 9
Views: 2926

Re: looking for the best wifi router (ISP)

sorry for this big delay!


Yes I mean INDOOR router. All the structure and wireless network is made. We can test 100mbps+ to the CPE antenna, and now we want to keep this speed at home for a descent signal.
by ubikrotik
Fri Nov 10, 2017 8:01 pm
Forum: General
Topic: mark packet in a switch possible?
Replies: 5
Views: 975

mark packet in a switch possible?

hi, we have a rb3011 as our main routeur, we ran cables to a rb750 upr2, then to antoher and finaly to a rb941 2nd. in the 941, we have a voip phone that is connected to. We made simple qos rule in both routers, (queue tree, mangle rules to mark packet that goes to the VOIP provider). So that is fin...
by ubikrotik
Sun Sep 10, 2017 8:56 pm
Forum: Wireless Networking
Topic: looking for the best wifi router (ISP)
Replies: 9
Views: 2926

Re: looking for the best wifi router (ISP)

Don't think you'll ever see the (real world) speeds you want on point to multi-point connections... Definitely no where near those speeds with a -80 signal. @ -60 I can certainly reach up to 100mbps. If you read my previous post : I said that is not important to reach this speed at -80. We consider...
by ubikrotik
Sun Sep 10, 2017 8:49 pm
Forum: Wireless Networking
Topic: RouterBoard hAP AC Slow wireless performance.
Replies: 35
Views: 13448

Re: RouterBoard hAP AC Slow wireless performance.

same thing here.

tried a lot of config, different mobile device.
last fw version.
I'm in rural, so 5g is crlea (-109db)
never got mor than 55 mbps on 20/40/80 ceee @ -70
by ubikrotik
Sun Sep 10, 2017 6:15 pm
Forum: Wireless Networking
Topic: looking for the best wifi router (ISP)
Replies: 9
Views: 2926

looking for the best wifi router (ISP)

Hi, can someone point me at the best Wireless home router setup? We plan to give 100/100 mbps internet connection to our customers. We want 5 and 2.4 band (5g 3 chains are not important since almost mobile device are 2 chains max) all ports 1gb Poe ports Router OS We need a good wifi coverage, not i...
by ubikrotik
Mon Aug 28, 2017 4:53 am
Forum: Wireless Networking
Topic: WAP AC wirelles perfo
Replies: 2
Views: 638

Re: WAP AC wirelles perfo

thanks.


i will clean up the air and let you know
by ubikrotik
Thu Aug 24, 2017 4:32 am
Forum: Wireless Networking
Topic: WAP AC wirelles perfo
Replies: 2
Views: 638

WAP AC wirelles perfo

Hello, Who already tried Wap AC device? Did you get good speed over Ac wireless? Just to give you an exemple : My ISP : 100/100 (tested from a connected Computer to the routeur (750upr2) 91.5mbps/89.9mbps) The Wap AC is connected to the routeur directly with the POE injector that come with. My phone...
by ubikrotik
Fri Aug 18, 2017 1:59 am
Forum: SwOS
Topic: SWOS to ROS
Replies: 7
Views: 4031

Re: SWOS to ROS

Is rb260gs + SWO more powerfull than all other (hybrid device) ?
by ubikrotik
Fri Aug 18, 2017 12:26 am
Forum: SwOS
Topic: SWOS to ROS
Replies: 7
Views: 4031

Re: SWOS to ROS

okay. Thank you friends. So now I can pretend that I hate SWOS :P
by ubikrotik
Thu Aug 17, 2017 11:48 pm
Forum: SwOS
Topic: SWOS to ROS
Replies: 7
Views: 4031

Re: SWOS to ROS

crs112 are switchs too, and I can use Winbox and it is running ROS.... I'm confused
by ubikrotik
Thu Aug 17, 2017 5:18 pm
Forum: SwOS
Topic: SWOS to ROS
Replies: 7
Views: 4031

SWOS to ROS

HI, I have a RB260GS with SWOS. It looks like a BASIC version of ros then I would like to know if it's possible to upload RouterOS inside the RB260 then used winbox and all other features.


thank you
by ubikrotik
Sun Jul 23, 2017 4:44 am
Forum: General
Topic: VLAN VLAN VLAN and VLAN
Replies: 9
Views: 2056

Re: VLAN VLAN VLAN and VLAN

thank you all guys, it helps a lot.

I will try some different scenario and let you know.


Thank you again for your help and support!
by ubikrotik
Tue Jul 18, 2017 2:21 am
Forum: General
Topic: VLAN VLAN VLAN and VLAN
Replies: 9
Views: 2056

Re: VLAN VLAN VLAN and VLAN

thank you idlemind


but if i do vlan correctlyi still cant understand, why i cant acces to my dhcp server.


I will try to reset all devices and start over.
by ubikrotik
Mon Jul 17, 2017 5:10 am
Forum: General
Topic: VLAN VLAN VLAN and VLAN
Replies: 9
Views: 2056

VLAN VLAN VLAN and VLAN

Still have question about VLANs. I search on the forum but never found answer. Maybe I don't understand how vlan work. Let say, I have a router, 3011. The router is connected to a crs125-24 then to crs109-8. VLAN1 : 100 VLAN2 : 200 VLAN3 : 300 VLAN4 : 400 VLAN5 : 500 VLAN6 : 600 At the switch side I...
by ubikrotik
Mon Jul 17, 2017 2:01 am
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

Thank you sir for your help. Do you know how to have a good jitter ? I know it depends about a lot of things, but are VLANs help to prevent hight jitter? Is it true that separate ''generic internet" from VOIP data help for jitter to get low since the moment the packets are treated at the same ''bott...
by ubikrotik
Sun Jul 16, 2017 9:33 pm
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

I see. Let say I have a perfect Layer 2 trunk (fiber) from my Voip Provider and my network. What is the next step to setup my Voip ? Already Done : Mangle rule that spot DSCP 46 and mark those packets. Queue tree wich give enough BW at those marked packets, considering 80k per active lines. And prio...
by ubikrotik
Sun Jul 16, 2017 6:26 am
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

I don't understand, Big carrier in the usa, mobile carrier,big entreprise, hospital etc are able to make Voip work realy good. If I can control all in my network, why should i not be able to make it work good too?
by ubikrotik
Sat Jul 15, 2017 6:25 am
Forum: General
Topic: Graphs reading
Replies: 3
Views: 548

Re: Graphs reading

realy? nobody know ?
by ubikrotik
Sat Jul 15, 2017 6:23 am
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

ok, the higher dscp level, the higher the priority?



packet with 46 value will be sent before dscp 26?


am i right?
by ubikrotik
Thu Jul 13, 2017 4:37 am
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

It is actually possible to design a network on which QoS is not really possible and VoIP will never work reliably. Be careful not to do that! In the meantime, make sure your VoIP traffic is DSCP EF (46) and all equipment along the link is handling that. (e.g. enable WiFi multimedia support when req...
by ubikrotik
Wed Jul 12, 2017 4:29 am
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

Hi, I made my works. Here my Mangle rule: DSCP_MANGLE chain=postrouting action=mark-packet new-packet-mark=voip-1 passthrough=yes dscp=46 log=yes log-prefix="DSCP-VOIP" Here my Queue Tree for upload part: 0 ;;; --- Upload --- name="UPLOAD" parent=ether1-WAN packet-mark="" limit-at=50M queue=default-...
by ubikrotik
Tue Jul 11, 2017 5:26 am
Forum: General
Topic: Graphs reading
Replies: 3
Views: 548

Re: Graphs reading

bump
by ubikrotik
Thu Jul 06, 2017 3:39 am
Forum: General
Topic: Graphs reading
Replies: 3
Views: 548

Re: Graphs reading

ohhh, maybe daily graphs is based on 24 hours ..? :shock:
by ubikrotik
Thu Jul 06, 2017 3:37 am
Forum: General
Topic: Graphs reading
Replies: 3
Views: 548

Graphs reading

Hi, How do i read graphs stats? Ether-1 is my WAN. If i take a look to my network during 7:00pm to 11:00pm I can see a lot of peak of 120Mbps and an average of 60 Mbps. When I read graphs (myip\graphs) I only see fore exemple : max in : 72; avr in : 31.22 and current in : 44.52. Isn't supposed to sh...
by ubikrotik
Tue Jun 27, 2017 10:47 pm
Forum: General
Topic: Parent Queue stop working with packet marks
Replies: 4
Views: 688

Re: Parent Queue stop working with packet marks

problem solved. Thx
by ubikrotik
Tue Jun 27, 2017 2:06 am
Forum: General
Topic: Parent Queue stop working with packet marks
Replies: 4
Views: 688

Re: Parent Queue stop working with packet marks

Up.[img][/img]
by ubikrotik
Sun Jun 25, 2017 10:37 pm
Forum: General
Topic: Parent Queue stop working with packet marks
Replies: 4
Views: 688

Re: Parent Queue stop working with packet marks

any expert here? :P
by ubikrotik
Sun Jun 25, 2017 10:32 pm
Forum: General
Topic: SWITCH crs112
Replies: 10
Views: 1389

Re: SWITCH crs112

thanks !
by ubikrotik
Sat Jun 24, 2017 4:41 am
Forum: General
Topic: Parent Queue stop working with packet marks
Replies: 4
Views: 688

Re: Parent Queue stop working with packet marks

simple queue tab-
by ubikrotik
Fri Jun 23, 2017 3:51 am
Forum: General
Topic: Parent Queue stop working with packet marks
Replies: 4
Views: 688

Parent Queue stop working with packet marks

Need help. Parent Queue add dst=ether1-WAN1 limit-at=200M/200M max-limit=200M/200M name="clients-" packet-marks=no-mark queue=synchronous-default/synchronous-default target=10.12.1.10/32 Child Queue add limit-at=2M/2M max-limit=2M/2M name=Voip packet-marks=voip-46 parent="client-1" priority=1/1 targ...
by ubikrotik
Thu Jun 22, 2017 5:26 am
Forum: General
Topic: SWITCH crs112
Replies: 10
Views: 1389

Re: SWITCH crs112

why mikrotik give us this tool?
by ubikrotik
Wed Jun 21, 2017 5:06 am
Forum: General
Topic: SWITCH crs112
Replies: 10
Views: 1389

Re: SWITCH crs112

750upr2, ccr1009 crs125 show me the true speed.


CRS112 have dificulty to handle 100mbps without burning is cpu to 25%.
by ubikrotik
Tue Jun 20, 2017 4:58 am
Forum: General
Topic: SWITCH crs112
Replies: 10
Views: 1389

Re: SWITCH crs112

No routing, ether1 master port.


Even tried the quick setup tab to set it up as a switch. Same result.
by ubikrotik
Mon Jun 19, 2017 4:56 am
Forum: General
Topic: DSCP need help
Replies: 2
Views: 520

DSCP need help

Hi, Can someone explain what is DSCP ? WIKI : Differentiated services or DiffServ is a computer networking architecture that specifies a simple and scalable mechanism for classifying and managing network traffic and providing quality of service (QoS) on modern IP networks. DiffServ can, for example,...
by ubikrotik
Mon Jun 19, 2017 4:32 am
Forum: RouterBOARD hardware
Topic: switch to use ..?
Replies: 2
Views: 617

Re: switch to use ..?

by ubikrotik
Mon Jun 19, 2017 4:31 am
Forum: General
Topic: SWITCH crs112
Replies: 10
Views: 1389

SWITCH crs112

Hi, i ordered 3 crs112, im disapointed of the bad performance. I know cpu is only 400mhz, but even for switching purposes the cpu running high 2 x crs112 linled together: I cant use the embeded speed test because the cpu is runing to 100% quickly. only 39mbps of troughput. If i plug my laptop to the...
by ubikrotik
Mon Jun 19, 2017 12:37 am
Forum: RouterBOARD hardware
Topic: switch to use ..?
Replies: 2
Views: 617

switch to use ..?

Hi, i ordered 3 crs112, im disapointed of the bad performance. I know cpu is only 400mhz, but even for switching this device looks like to be bad. 2 x crs112 linled together: I cant use the embeded speed test because the cpu is runing to 100% quickly. only 39mbps of troughput. I i plug my laptop to ...
by ubikrotik
Tue May 02, 2017 4:26 am
Forum: Beginner Basics
Topic: 2 network, 2 ISP, Failover need help
Replies: 11
Views: 2139

Re: 2 network, 2 ISP, Failover need help

yeah, this is a sharp question and I gave you a simple diagram of a part of my network. So sorry. Yes in blue these are switchs. I add to my routers a lot of subnet. The reason is to put together all devices related to this section of thenetwork. For exemple , 10.13.1.0/24 are all for the city A and...
by ubikrotik
Sun Apr 23, 2017 8:20 pm
Forum: Beginner Basics
Topic: 2 network, 2 ISP, Failover need help
Replies: 11
Views: 2139

Re: 2 network, 2 ISP, Failover need help

Maybe it should look like this ?? : new route : Dst add : 10.12.1.0/24 DG : ether-5 (where eth-5 is connected to the backup link, it's also connected to 10.8.1.20 switch) Distance : 10 Pref source : 10.12.1.2 Correct me if i'm wrong : Let say device (PC1) want to reach www.google.com : The packet wi...
by ubikrotik
Sun Apr 23, 2017 7:49 pm
Forum: Beginner Basics
Topic: 2 network, 2 ISP, Failover need help
Replies: 11
Views: 2139

Re: 2 network, 2 ISP, Failover need help

good let say: RT1 (at&T) RT2 (Comcast) Both RT1 RT2 have those ip add subnet : 10.3.1.0/24 10.8.1.0/24 10.12.1.0/24 10.13.1.0/24 DG for all subnet is : xxx.xxx.xxx.1 (ex: 10.12.1.1 is the DG of the subnet 10.12.1.0/24) For exemple RT1 Routes for 1 subnet : ///////////////////////////////////////////...
by ubikrotik
Sun Apr 23, 2017 6:11 am
Forum: Beginner Basics
Topic: 2 network, 2 ISP, Failover need help
Replies: 11
Views: 2139

Re: 2 network, 2 ISP, Failover need help

hey guys! Thx for supporting me!

I didnt set static routes with different cost. I need to read more about this. I don't know how this mecanism work.

How it works? A route with the lower cost is the prefered one?
by ubikrotik
Fri Apr 21, 2017 4:05 am
Forum: Beginner Basics
Topic: 2 network, 2 ISP, Failover need help
Replies: 11
Views: 2139

Re: 2 network, 2 ISP, Failover need help

Any idea
by ubikrotik
Fri Apr 21, 2017 4:02 am
Forum: Beginner Basics
Topic: Product recomandation
Replies: 12
Views: 1677

Re: Product recomandation

Thank you very much all.
by ubikrotik
Wed Apr 19, 2017 2:58 pm
Forum: Beginner Basics
Topic: Product recomandation
Replies: 12
Views: 1677

Re: Product recomandation

wonderfull.


But i still dont understand why switching result page show lower value :

Switching Non blocking Layer 1 capacity 37,202.4 50,000.0 5,874.1 50,000.0 2,031.9 50,000.0


thank you
by ubikrotik
Wed Apr 19, 2017 4:07 am
Forum: Beginner Basics
Topic: 2 network, 2 ISP, Failover need help
Replies: 11
Views: 2139

2 network, 2 ISP, Failover need help

Hi all, I'm looking for help here in mikrotik forum. I want to make a ''simple failover system'' between 2 networks. I said simple because it's easy for you but not for me ;) Here is my draw of the simple network : https://drive.google.com/file/d/0B80b4_G1gNq2VFdRUkx0dTZOZlk/view?usp=sharing At the ...
by ubikrotik
Wed Apr 19, 2017 3:00 am
Forum: Beginner Basics
Topic: Product recomandation
Replies: 12
Views: 1677

Re: Product recomandation

It helps. Thx


Do you mean for exemple that the crs125 24 ports can handle up to 1gbps per port at the same time?
by ubikrotik
Tue Apr 18, 2017 5:50 am
Forum: Beginner Basics
Topic: Product recomandation
Replies: 12
Views: 1677

Re: Product recomandation

thank you.

I only need a switch that can handle enought BW.

switch need to work well with VLAN.

At the moment there is no VLAN on the network, but for future services : VoIP and IPtv we certainly need VLAN.

Thank you guys!
by ubikrotik
Tue Apr 18, 2017 3:07 am
Forum: Beginner Basics
Topic: Product recomandation
Replies: 12
Views: 1677

Re: Product recomandation

Well, i think its buffer problem, flow control. About my littles towers: https://routerboard.com/CRS112-8G-4S-IN Is the crs112 can do the job in for my little tower? Spec sheet : 400mhz cpu and 128 of RAM. Is it enought ? What does the switching result and ethernet test result mean? And our bigs tow...
by ubikrotik
Mon Apr 17, 2017 5:40 am
Forum: Beginner Basics
Topic: Product recomandation
Replies: 12
Views: 1677

Product recomandation

Hi, I'm running a little WISP network. About 10 towers, total 300 customers. And a total BW of 600/600 Mbps at the moment. We use Ubiquiti AC gear and AirFiber and ccr1009 router at the head end. The big problem is pointing at our switchs . We use ToughSwitch from Ubiquiti and it comes with performa...
by ubikrotik
Mon Apr 03, 2017 4:30 pm
Forum: General
Topic: Request help in ubnt forum(Mikrotik gear)
Replies: 5
Views: 910

Re: Request help in ubnt forum(Mikrotik gear)

You are right. I will take a look this week with more result. I'll let you know!
by ubikrotik
Sat Apr 01, 2017 12:38 am
Forum: Beginner Basics
Topic: Ethernet test results
Replies: 0
Views: 400

Ethernet test results

HI, How do I read this : https://routerboard.com/RB3011UiAS-RM (at ethernet test results) RB3011UiAS-RM IPQ-8064 All port test Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 325.0 3,946.8 939.8 3,849.4 1,530.2 783.5 Bridging 25 bridge filter rul...
by ubikrotik
Thu Mar 23, 2017 1:57 am
Forum: General
Topic: Request help in ubnt forum(Mikrotik gear)
Replies: 5
Views: 910

Re: Request help in ubnt forum(Mikrotik gear)

I have the same problem when i use the mikrotik public btest. Looks like my firewall. But everything looks ok....any idea want a screenshot?
by ubikrotik
Wed Mar 22, 2017 2:11 am
Forum: General
Topic: Request help in ubnt forum(Mikrotik gear)
Replies: 5
Views: 910

Re: Request help in ubnt forum(Mikrotik gear)

Hi!

Yeah it is a 951Ui-2HnD


Yes toughswitch arnt the best . What mikrotik gear do you suggest instead?
by ubikrotik
Thu Jan 26, 2017 6:06 am
Forum: General
Topic: VLAN setup need help
Replies: 0
Views: 310

VLAN setup need help

Hi guys, Click to the link below : https://docs.google.com/document/d/1xXts8fpmG7ggUDzb12pbbox5aT30ADmU8G7uFBN_XAA/pub I want to manage VLAN but i'm not sure how to do. I want to creat a VLAN ID 100 for my ISP DISH on port 8 and the SFP port wich is number 9. So all the data will pass through the fi...
by ubikrotik
Wed Aug 24, 2016 6:05 am
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

Re: VOIP QOS

thank you for your quick reply.

Yeah i can give you more details, what do you want to know?

The goal for the moment is to make priority on VoIP packets when other clients are using internet BW.
by ubikrotik
Tue Aug 23, 2016 9:51 pm
Forum: General
Topic: VOIP QOS
Replies: 18
Views: 3546

VOIP QOS

Hi, can someone help me, we are using a ccr1009 and we want to add a QOS rule on our router to help Voip service on our network.

I saw a lot of posts on this but it looks like there are more than one way to achive that.


Step by step solution with explication will help us a lot. Thank you .
by ubikrotik
Fri May 27, 2016 3:03 pm
Forum: Beginner Basics
Topic: Monitoring ip traffic
Replies: 3
Views: 986

Re: Monitoring ip traffic

Ip accounting looks like what i was looking for. Thank you sir!
by ubikrotik
Fri May 27, 2016 2:49 pm
Forum: Beginner Basics
Topic: Monitoring ip traffic
Replies: 3
Views: 986

Re: Monitoring ip traffic

Hi thank you for you quick reply.

At the moment, what i want is to see the traffic of each device. I dont want to store data or do something special with that.


Regards,
by ubikrotik
Fri May 27, 2016 12:31 am
Forum: Beginner Basics
Topic: Monitoring ip traffic
Replies: 3
Views: 986

Monitoring ip traffic

HI everyone, I would like to know if it's possible to see/monitor, each ''clients'' traffic on a network using mikrotik router? For exemple, I have 105 devices on a network with static ip, and i want to know the real traffic of each devices : ip : 192.168.3.120 --> tx : 12.4 Mbps, rx : 16.1 ip : 192...
by ubikrotik
Thu May 26, 2016 4:37 am
Forum: Beginner Basics
Topic: Syslog Watche + CCR1009
Replies: 4
Views: 915

Re: Syslog Watche + CCR1009

I advise you to read again what I replied.

That's what i've done and now it works. :lol: haha so sorry , i read it too fast first time.
by ubikrotik
Wed May 25, 2016 3:50 pm
Forum: Beginner Basics
Topic: Syslog Watche + CCR1009
Replies: 4
Views: 915

Re: Syslog Watche + CCR1009

not working.

system--logging--actions--syslog

remote adress should be the syslog server machine address right?

And source should be the router address?

Need i setup something here :

system--logging--actions--remote ?



thank you for your help
by ubikrotik
Wed May 25, 2016 4:17 am
Forum: Beginner Basics
Topic: Syslog Watche + CCR1009
Replies: 4
Views: 915

Syslog Watche + CCR1009

Hi guys, I'm a new user of Mikrotik gears. I just turn on my first CCR1009 yesterday as the main Router of my tiny WISP network. I would like to know how to setup a syslog server with Mikrotik. I use Syslog watcher running on win7. My syslog watcher software is ready and listen on default por (514/u...