MikroTik

Shadeofspirit

Crs326 - bonding stop working after update to 7.13
Disabling/enabling bonding interface, recreation doesn't help.
Traffic is just stop going after update. (Synology nas is in the other end)

Shadeofspirit

/ip dns set allow-remote-requests=yes cache-size=20480KiB max-concurrent-queries=300 \ max-concurrent-tcp-sessions=80 servers=8.8.8.8,8.8.4.4 to look for source of DNS traffic you can use torch. also, if you really had made firewall rules to block dns requests from outside, don't forget that the or...

Shadeofspirit

UAP requires untaged vlan for management. so, you shoud create one more vlan (untaged) for management, or change one of your vlans to be untaged on port to which UAP is connected

Shadeofspirit

this are not my routers, so i wouldn't check, but as i see in your post - they have old ROS. In 6.42.1 was fix for vulnerability in winbox yah not work with 6.42.1 you are rigth after my post someone shear this post viewtopic.php?t=133533 and talks about this bug That's great work from Mikrotik to ...

Shadeofspirit

this are not my routers, so i wouldn't check, but as i see in your post - they have old ROS. In 6.42.1 was fix for vulnerability in winbox

Shadeofspirit

public ip 80.249.83.171 opean port www and winbox 8291 sir Starting Nmap ( https://nmap.org ) at 2018-06-09 04:16 UTC NSE: Loaded 40 scripts for scanning. Initiating Ping Scan at 04:16 Scanning 80.249.83.171 [4 ports] Completed Ping Scan at 04:16, 0.22s elapsed (1 total hosts) Initiating SYN Stealt...

Shadeofspirit

public ip 80.249.83.171 opean port www and winbox 8291 sir Starting Nmap ( https://nmap.org ) at 2018-06-09 04:16 UTC NSE: Loaded 40 scripts for scanning. Initiating Ping Scan at 04:16 Scanning 80.249.83.171 [4 ports] Completed Ping Scan at 04:16, 0.22s elapsed (1 total hosts) Initiating SYN Stealt...

Shadeofspirit

public ip 80.249.83.171

Shadeofspirit

What POE?

In other thread you had written that you had tried "to power it up by Ethernet ". Hap lite doesn't support it. if you really tried to power it by Ethernet it looks like you had broken it

Shadeofspirit

I cant connect to the ethernet cause its not working And the is no wifi the ethernet also has no lights on it even if it is connected my device is a hap lite please help me fix this problem for details you can look on the photo i think, it is due to the fact that you had tried to power it up by POE.

Shadeofspirit

I only see winbox 3.13 on the download page. Is there some other location I should be looking to get 3.14?

https://www.mikrotik.com/download/share/winbox.exe

Shadeofspirit

I did read the release notes and I knew there were changes related to hashed passwords. I just upgraded another router and I can't login in using winbox/ssh/webfig when the router comes back up. It just says wrong password.

use winbox 3.14

Shadeofspirit

New hex will cpu mt7621a (2 core, 4 threads, 880mhz), no wifi, 5 1gb ports, 5th - poe out, the first - poe in, microSD card, usb type a, 1 sfp port, hardware encryption, support dude.
model called hEX S

Shadeofspirit

Hello, if we install a backup to another equipment(same model) all mac addresses are retained from the old one. Is this behaviour normal? If so why is this? SInce it will be another hardware.. look in wiki - it is normal. backup is for use with the same RB (not the same model etc.). use export/impo...

Shadeofspirit

Great, thank you! Hiw did you find these vars names?

From example in internet

Отправлено с моего Redmi 3S через Tapatalk

Shadeofspirit

hi to all here... i am trying to setup a mikrotik rb2011 router with an Unifi-AP.. The setup should be pretty simple... what i would like to get working is this: setup the mikrotik router for dual wan with failover ( backup line ) only.. So NO load balancer ... then i need 3 Wifi networks followed ...

Shadeofspirit

Hello, Does anyone have email alerts set up for temperature, if so how did you do it? I would prefer to do it from the Mikrotik itself, rather than from a third party tool. There is script for telegram (notification if temperature is more than 30 degrees). put it in scheduler. the same you can use ...

Shadeofspirit

I try to use rogue DHCP detector ( https://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server#Alerts ) to detect bad hosts within legacy network. I would like to use script to run on detection event but what I would like to know is how can I know MAC of rogue DHCP server found? I will set up sending mess...

Shadeofspirit

Hi, everybody! I ask for help in settings of monitoring of the interface of the lte-modem on a microtic 951ui 2HnD, in a case when it imperceptibly falls off, the notification message in telegrams or came to other monitorings. I found articles in the Internet on this occasion, but there monitoring ...

Shadeofspirit

i had found the logo, but in "partners" part of the start page. so, are they really partners or it is fake advert?

Shadeofspirit

Does MikroTik hEX works with USB 3G/4G Modems? -MikroTik hEX lite -MikroTik hEX -MikroTik hEX PoE lite you can use usb modem with hex and hex poe lite. with hex lite you cann't use - it doesn't have a usb port. but you should remember that some models of 4g usb modems will not work (but most will w...

Shadeofspirit

Does anyone know of any alternative casings for this AP? It doesn't look like Mikrotik provides any, nor have I been able to find anywhere else online, but thought I'd try my luck here in this forum..?

Thanks,
Geir

wait for new cap ac. there is some information that it will be with 2 enclosures

Shadeofspirit

I did follow the guide but there is no option to include the 'dude' permission when I try to change it in winbox so I still get locked out of The Dude

what version of dude do you use and what version of client? what kind of error message do you have?

Shadeofspirit

which version must i install and put it into router? it is a server.
In download section is more than 1 version

look the same version as your ROS

Shadeofspirit

@Shadeofspirit, Understood. So how can I use DHCP relay on a setup like this? how DHCP Relay can be useful to do such tasks? please state those tasks. Thanks Actually i don't understand why do you need dhcp relay. if you create on your main router bridges, config dhcp servers on them, config capsma...

Shadeofspirit

Hay @Shadeofspirit, Can you please give out the steps to configure DHCP Relay on my capsman router, where I have configured my hotspots? Thanks :) what is your current config? @Shadeofspirit, my current config is, I have main router configured with 3 hotspots(capsman running) and another mkt as a c...

Shadeofspirit

Hay @Shadeofspirit, Can you please give out the steps to configure DHCP Relay on my capsman router, where I have configured my hotspots? Thanks :) what is your current config? @Shadeofspirit, my current config is, I have main router configured with 3 hotspots(capsman running) and another mkt as a c...

Shadeofspirit

Hay @Shadeofspirit, Can you please give out the steps to configure DHCP Relay on my capsman router, where I have configured my hotspots?

Thanks

what is your current config?

Shadeofspirit

Maybe you should see this. It has all the wifi you can need. https://mikrotik.com/product/RB962UiGS-5HacT2HnT Hap ac better than wap ac? yes, it has better wifi antena (look to the letters in model number) wap ac is: RBwAPG-5Hac T 2Hn D (tripal chain fo 5ghz and dual for 2.4) hap ac is: RB962UiGS-5...

Shadeofspirit

I first saw this after a reboot also... Trying to think of possible debug options. Mine is at a tower on the hill, so I can't physically test replug. I am glad you tried that. It seems the unit doesn't properly mount the drive some times, but there is no manual command to do that. I had tested it o...

Shadeofspirit

change port number in "probe" for Router OS
this is the first thing I tried - does not work
probe.jpg

8291.jpg

that was my mistake, i forgot that i monitor ROS as a separate service.

Shadeofspirit

Hello.

Help me please:
connect.jpg
On RouterOS port is not standard. Dude connects to port 8291, how to change port on Dude?

Best regards.

change port number in "probe" for Router OS

Shadeofspirit

What I am trying to do is configuring capsman in ip level, then create hotspots on the main router which is capsman(also has dhcp servers assigned) and using other cap aps to broadcast the ssid, as the this post was based on. Now ahat I want to do is, create a dhcp server on the cap ap and use that...

Shadeofspirit

Another quick question mate, Is that possible to configure a DHCP on the CAP AP and so the users connecting through the AP gets one of the addresses from configured DHCP Address pool? in this way every CAP AP (not clients on this APs) will be a user for hotspot. but as a variant you can try to setu...

Shadeofspirit

be careful with config with from this presentation - it works very good (no matter what torrent client, en-scripted or not). but it have one big minus - if your have a device with not enough memory (RAM) you will run out of it rather fast (at the end of presentation there is some information about u...

Shadeofspirit

Edit: Duplicate post, attempted to delete but it wouldn't let me. We're having problems blocking P2P traffic and I volunteered to help even though I'm much more familiar with IOS & Meraki than with RouterOS. ISPs are sending notifications that our wireless users are downloading movies from hone...

Shadeofspirit

/tool fetch url="https://api.telegram.org/botxxxxxxxxx:yyyyyyyyySMp2Oz7gyZOeNmq1pDcJ-o/sendMessage\?chat_id=-12121212&text=[Probe.Name] on [Device.Name] now [Service.Status] ([Service.ProblemDescription])" It work's when i try test, it send's message in chat, but when swich drop nothi...

Shadeofspirit

Hi hi, team. I'm stuck on same problem, or similar to this one. When i test dude notification all working ok, but when some switch in dude lost , the chat bot is silent. And i dont know where can be the mistake, because all is working but bot in the chat sleeping :) Any information needed ? did you...

Shadeofspirit

+1
also interested in device like ltap mini and some other RBs with din rail mount

Shadeofspirit

Another Question, Do you have any idea, one of my new RB, I used it for few days and once I reseted it, now I cant winbox it using mac (ip is 0.0.0.0), tried tried using connected to another RB and mac telnet the new router, but still the same issue. cant connect. Is this a faulty RB? I tried reset...

Shadeofspirit

Yes, I have my main RB with 3 hotspots configured and wlan1 interface shares all 3 SSID's of those 3 hotspots. So If I am going to use my APs to show those SSIDs, what should I do? and I also want users to login to the network using the portal page, which is already has on my current setup. but con...

Shadeofspirit

can you please explain 5)create provisioning rules: one "configuration" will be master, other add as slave ? why do we need this and what does this do please? I meant configuring as master and slave. And another confusing thing is, since I already have SSIDs for my hotspots, do I need to ...

Shadeofspirit

Directly connected through ethernet ports. so, you wil need smth like this: https://drive.google.com/open?id=0Bxq9Ym3e0mk-cVkwUlBlX0YySk0 1)create datapaths for all your SSIDs (like on image except vlan id) in "bridge" you should paste your hotspot bridges (don't use local forwarding) 2)c...

Shadeofspirit

Yes. Different bridges for each hotspot. So data paths along with the local forwarding will do the job? first of all you should look for your actual network setup and decide to use ore not local forwarding. when you use it you should have access from AP to all your three hotspot networks - all SSID...

Shadeofspirit

What does This MicroUSB Port really do in this board?
https://mikrotik.com/product/RBcAPL-2nD-307
Code: Select all
Number of DC inputs 	1 (PoE-IN)
says that there is 1 PoE IN for this board

cap lite is the same as map lite, so usb port can be used only for power. you can power it by poe or usb or both

Shadeofspirit

Yes. Different bridges for each hotspot. So data paths along with the local forwarding will do the job? first of all you should look for your actual network setup and decide to use ore not local forwarding. when you use it you should have access from AP to all your three hotspot networks - all SSID...

Shadeofspirit

so even if i got the backup i can't read it ?

yes, you can't read user password because of security reasons.
but if you have a backup (or config export) with last configuration you can rather fast reset your device and restore actual configuration

Shadeofspirit

[quote="darkoknght"] but lets say my router got hacked and they changed the password will it send the new password in the next backup ? /quote] no, there are no password in config export, password can be in backup, but you also can't look for it. as a variant you can send all *.rsc files t...

Shadeofspirit

Hi There, I already have a hotspot configured at my working place. but now I want to continue service, get better coverage using capsman. I got two other mikrto hap routers but still couldnt get it done. I want I have a basic understanding how capsman works and Can you please let me know how to do ...

Shadeofspirit

Hi There, I already have a hotspot configured at my working place. but now I want to continue service, get better coverage using capsman. I got two other mikrto hap routers but still couldnt get it done. I want I have a basic understanding how capsman works and Can you please let me know how to do ...

Shadeofspirit

hello everybody ; is there a way to set a rule or something to send back up to email automatically like everyday ? and does it send a backup even if the password of mikrotik has changed ? in Tools-Email put credentials to e-mail create script: /export file="config" /tool e-mail send to=em...

Shadeofspirit

Shadeofspirit, i receive your message. Thanks for the help man, i´ll try it on a script as you said.

if you want, i can send you script that i used for sending message by skype, telegram, viber, e-mail
and i suggest you to delete your message on forum with your bot token

Shadeofspirit

What am i missing here ?

Please, write there if you get message in telegram.
If you get - all is correct in your config.
read my previous message - this command can be used in script, but not in command line

Shadeofspirit

first of all: /sendMessage? before chat_id the second is, that you can use it in script (create test scrip with only command to send message), because from command line on mikrotik it wouldn't work So the line should look like this ? /tool fetch url="https://api.telegram.org/bot<BOT_ID>:<BOT_T...

Shadeofspirit

the command to send is: /tool fetch url="https://api.telegram.org/botXXXXX:YYYYY/sendMessage?chat_id=ZZZZZ&text=Hello World" keep-result=no where XXXXX is your bot id YYYYY bot token ZZZZZ chat id Sorry man, i didn´t write it right on the last post, but that´s exactly what i typed... ...

Shadeofspirit

I have followed the instructions but it doesn´t work. To see what´s happening i tried the fetch command on the command line but i always receive the following error: [admin@Dude_x86] > /tool fetch url="https://api.telegram.org/bot<TOKEN_BOT>\?chat_id=348399094&text=HelloWorld!" keep-r...

Shadeofspirit

I have followed the instructions but it doesn´t work. To see what´s happening i tried the fetch command on the command line but i always receive the following error: [admin@Dude_x86] > /tool fetch url="https://api.telegram.org/bot<TOKEN_BOT>\?chat_id=348399094&text=HelloWorld!" keep-r...

Shadeofspirit

As I understand, if I see MAC adress, its mean I shoud connect to device. Is it? yes, if you see it's MAC in neighbors then you should connec't to it, but if you had disabled neighbor service or blocked it form this interface you will unable to connect by it. can you connect to it by any other serv...

Shadeofspirit

As I understand, if I see MAC adress, its mean I shoud connect to device. Is it? yes, if you see it's MAC in neighbors then you should connec't to it, but if you had disabled neighbor service or blocked it form this interface you will unable to connect by it. can you connect to it by any other serv...

Shadeofspirit

Try the "clear cache" option in Winbox loader menu. Hello Unfortunately no changes.... how do you power it up (poe or micro usb)? i have 2 map lite and 1 cap lite (it is the same as map lite) and i have problems with one map lite (one of the first revisions) and cap lite. the problem is t...

Shadeofspirit

hi
how do disable and enable interface in the mikrotik by script?

enable:
interface ethernet set ether1 disabled=no

disable:
interface ethernet set ether1 disabled=yes

Shadeofspirit

Hello, I have a SIP provider who has 8 servers. Then I created an addres-list called SIP_Provider I have three phones (one ip phone and two softphones) on my lan 192.168.1.0. Then I created an address-list called Phones I want to forward the voip traffic (sip+rtp) from SIP_Provider to Phones In the...

Shadeofspirit

according to your rif file you have Hap AC

ask your provider about the kind of connection.
in some countries you just need to create dhcp client (according to your file on interface lte1)
in other countries you need to create ppp connection on lte1

Shadeofspirit

Hi, I am trying to configure a newly purchased Mikrotik HAP Lite router with a ZTE USB modem supplied by a local suppler here in Zanzibar, the provider is Halotel. When connected the modem appears to be recognized but no port appears. Am I missing a step? As per forum suggestions I have attached a ...

Shadeofspirit

[quote="khialb32"][/quote]
i think that the problem in the mode of your AP. it works like a router (wifi clients get ip and other settings from it, not mikrotik).
Put it in ap mode (i don't know haw it is called in this particular AP)

Shadeofspirit

This way, even if the clouds suffer instability, dude server will not send false positive alerts. :) If there is instability/error in connection between server and collector there will be unstable/error message in dude server. Information about remote devices collects remote dude collector (agent),...

Shadeofspirit

Hi, Is there a way to install a remote collector or proxy to get the data from far devices. We get a lot of false positive in our infrastructure. This way it could facilitate and turn more reliable the monitoring process. :D Any ROS device can be a dude collector. For example i have one dude server...

Shadeofspirit

Hello, I'm looking for a switch with 8 to 24 10GBASE-T ports, and 2 or more SFP+ ports... and quiet cooling. Passive would be ideal. Preferably rackmounted. Do you guys have something like that in your plans for the future? :) Sorry if there was similar thread already - I couldn't find any. Regards...

Shadeofspirit

add one host to the list and export it

Shadeofspirit

OK, now what format? spaces, coma newline for next device? ipaddress, user, password, note ? 1.1.1.1, admin, admin, test some symbols i can't read (i don't know the format) but the other is (all letters with CAPS are the settings, other - made by app): ��" hostADDRESS keep-pwd loginYOURLOGIN p...

Shadeofspirit

Yea I got that... What format does the file need to be in?

it is a text file (passwords are also in clear text)

Shadeofspirit

anyone now how to import address and password into the app?

near the address field there is a button - it opens the least of connections. at this least the button (looks like spanner) opens menu with import and export.

Shadeofspirit

check if the port of your dude server and of Mikrotik (192.64.y.248) are the same (the default port is 8291)

Shadeofspirit

Thank you for your explanation. The router has some rules setup to block unusual behavior. And one client is block. I just need to unblock a specific IP :) And i just can't find it using the WinBox. Can somebody help me with this? //Sorry for being such a noob :) look at "ip-firewall- address ...

Shadeofspirit

according to mikrotik website: The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity there are 2 models ( actually 3, the third is for US) wAP LTE kit - with lte modem and wAP lte R - with out modem. try to find more ...

Shadeofspirit

Normis will it support sms? Because I just bought an SXT LTE to use to send SMSes but it is not working. Also are you planning to support SMS in the SXT LTE? are you sure that your 4g provider support sms via 4g? most of operators doesn't (4g is for traffic and video calls). sxt lte, wap lte (versi...

Shadeofspirit

Anyone can confirm... ip>>cloud not working on 6.40
Blank
Only you can force update date/time

Sent from my iPhone using Tapatalk Pro

yes, i have problems with ip-cloud on three rb3011 with ROS 6.40

Shadeofspirit

good news! it looks like solution not only for your problem! in Belarus is the same situation

Shadeofspirit

hi I use the dude and need a way to monitor ping if it exceeds (50 ms) the color of the link it transfer from green to red

look at this thread viewtopic.php?t=121992

Shadeofspirit

I have MikroTik RB2011UI AS-RM my I.T guy said THEDUDE doesn't support my router because it's old, so please help me out. it is not supported for dude. there is a list of supported systems (from wiki): Tile - CCR series hardware ARM - RB3011, RB1100AHx4 Dude Edition (RB1100Dx4) mmips - hEX (RB750Gr...

Shadeofspirit

Hi, is it possible to use mAP lite plugged with USB LTE modem while powering by a 5V USB portable battery? I know some of 7V/8V RBs works under 5V with no USB voltage output(or too less ampere). However, mAP lite supports 5V officially. How about it's USB? now, you can not use it in such way. mapLi...

Shadeofspirit

According to information in internet, 865-867 Mhz band in India is not for wireless networks, it is for RFID tags. So, you should look for other kind of devices, not routers and APs

Shadeofspirit

nobody?

actually, you should have it. check your firewall rules. i think you have smth like "HiLink" modem. It has it's own DHCP that gives ip gw and dns to LTE interface in RB. Check if there is a route to 192.168.8.* subnet

Shadeofspirit

in wiki there is instruction how to recover db. in my case i usually stop dude before update (it helps to prevent such error) THanks for the suggestions. I will do that next time before updating. I used the wiki to repair the database. Thanks Also it is useful to stop dude if you want to reboot rou...

Shadeofspirit

I recently upgrade my ccr 1009-8G-1S-1S+ from v6.37.5 bugfix to v6.38.8 bugfix. on doing so I get an error a few minutes after the router booted 20:42:34 echo: dude,critical db failure: database disk image is malformed . I can create a new db and it works fine. I have tried backing up the database ...

Shadeofspirit

I have a script that is scheduled to run every 15mins on my CPE's but the problem ones give 96 emails per day like this one below ( note - the email subject line has all the data i need ) "AP Identity : CPE Identity : 16:21:54: jul/10/2017: XXX ping avg: 134-ms Sent:200 Received:200 SNR: 37 Si...

Shadeofspirit

I just received a new RB750Gr3, and am having issues installing the Dude Server. I uploaded the package multiple times, updated to 6.39.2, and tried multiple Dude server versions with no success. Other packages are updating/installing fine, but The Dude will not install. Am I missing something? wha...

Shadeofspirit

i can't help with checking send email (i didn't have to setup this). in my cases i usually setup logging to remote servers and for critical systems have telegram alerts This setup work if the device is supposed to be constantly connected. If the connection stops, the message to syslog server are lo...

Shadeofspirit

Thanks very clear and it works ;) I'm a beginner of RouterOs and after many research i found that from script i have to save any messages about topics we select (es. warning or info or..) and after (download, email..) filter it to select the messages that interest us. In my mind, working on linux s...

Shadeofspirit

In log i want write a string like "PC1 is down". I don't understand how to use "action" and "rule" of logging system to obtain a file only dedicated to netwatch message. I don't understand how to log only netwatch log because script can write only on 4 topics.. "d...

Shadeofspirit

I'm a beginner of RouterOS ;) I would like to set up a lan monitoring tool that send me the log daily. Email is already configured. Using netwatch i want log only if a host is down. But how can i write a specific log only dedicated to netwatch and send it only daily by email ? How can i "reset...

Shadeofspirit

Are you running my BlackList? It will help protect you from many attacks. If this is a DDoS attack, and you have a dynamic IP, the simple solution is to change your MAC address on the WAN port and reboot the modem to get a new IP address. https://forum.mikrotik.com/viewtopic.php?f=9&t=98804 My ...

Shadeofspirit

Are you running my BlackList? It will help protect you from many attacks. If this is a DDoS attack, and you have a dynamic IP, the simple solution is to change your MAC address on the WAN port and reboot the modem to get a new IP address. https://forum.mikrotik.com/viewtopic.php?f=9&t=98804 My ...

Shadeofspirit

Hello, Very frequently I am getting attacked by some attackers with random port. It causes to make jam into my network. If anyone have good solution to protect from the attack, please share here. Here, 103.239.5.32/27 is my routing IP block. [img]Random%20Port%20Attack.JPG[/img] the connection is f...

Shadeofspirit

using this script with telegram ?

yes, you can add (or replace e-mail) notification to telegram. i use it with my RBs

Shadeofspirit

Hi, I'm playing with The Dude now and I'm not 100% sure I understand if I can do this: I have multiple RBs, hAPs, RB951s, etc placed at various locations in my city. I have access to all of them via WAN with Winbox. I use the Mikrotik Cloud service because they're on different ISPs and most of them...

Shadeofspirit

Is it possible to copy a packet passing through Mikrotik and forward to another host for analysis? I mean the original packet still goes through to its intended host and its copy goes to another host. I know the packet sniffer can do that but it's in TZSP. The analysis software is custom, not WireS...

Shadeofspirit

You reinstall the router with RouterOS and then you have a clean install without Dude but also without any own configuration. You will have to restore your backup config and if you don't have one then you have do it manual for each rule and setting. u mean that i need to reinstall the RouterOS for ...

Shadeofspirit

Can you just tell me about Dude. Does it possible to get an alert for maybe ping to create alarms? Just ask because of much queries to router... yes, you can use it. for example i use it to send e-mail for warnings and not very critical events. and most important are also send to telegram. but if y...

Shadeofspirit

in agent is only default. it means that you have only one ROS device in dude. so, ping rtt from your dude server to 8.8.8.8 is also >100 when you test? I can choose instead of default a device which is in the Device. But it is the same. to device. Problem is when server has higher ping. i can't tes...

Shadeofspirit

in agent is only default. it means that you have only one ROS device in dude. so, ping rtt from your dude server to 8.8.8.8 is also >100 when you test? I can choose instead of default a device which is in the Device. But it is the same. to device. Problem is when server has higher ping. i can't tes...

Shadeofspirit

in agent is only default.

it means that you have only one ROS device in dude.
so, ping rtt from your dude server to 8.8.8.8 is also >100 when you test?

Shadeofspirit

very strange. on history tab of the service you can see graph with values. what values does it get (when ping is > 100ms)? This is a graphgra.png I cant see there is more than 100ms? ok. and our "default" agent is the mikrotik from that site (it also will have >100ms to 8.8.8.8) or it is ...

Shadeofspirit

very strange. on history tab of the service you can see graph with values. what values does it get (when ping is > 100ms)? This is a graphgra.png I cant see there is more than 100ms? ok. and our "default" agent is the mikrotik from that site (it also will have >100ms to 8.8.8.8) or it is ...

Shadeofspirit

very strange. on history tab of the service you can see graph with values. what values does it get (when ping is > 100ms)?

Shadeofspirit

i found it, and response with a bit delay notification popup. But it works. Thanks glad to help you can try to change "probe interval", "probe down count", "probe timeout" to have faster response also notifications to telegram come faster than e-mail i putted notificat...

Shadeofspirit

sorry for that, but again parse error.. in error line - you deleted ) at the end i found it, and response with a bit delay notification popup. But it works. Thanks glad to help you can try to change "probe interval", "probe down count", "probe timeout" to have faster r...

Shadeofspirit

sorry for that, but again parse error.. in error line - you deleted ) at the end i found it, and response with a bit delay notification popup. But it works. Thanks glad to help you can try to change "probe interval", "probe down count", "probe timeout" to have faster r...

Shadeofspirit

sorry for that, but again parse error..

in error line - you deleted ) at the end

Shadeofspirit

Is this that? How can I decide on which device this working? Or that work on all devices in Dude? look this: https://drive.google.com/open?id=0Bxq9Ym3e0mk-bXptQXRXX2JCYkk i modified this probe to your needs. add it to all devices from which you want to monitor ping to 8.8.8.8 actually, i don,t know...

Shadeofspirit

Is this that? How can I decide on which device this working? Or that work on all devices in Dude? look this: https://drive.google.com/open?id=0Bxq9Ym3e0mk-bXptQXRXX2JCYkk i modified this probe to your needs. add it to all devices from which you want to monitor ping to 8.8.8.8 actually, i don,t know...

Shadeofspirit

Is this that? How can I decide on which device this working? Or that work on all devices in Dude? look this: https://drive.google.com/open?id=0Bxq9Ym3e0mk-bXptQXRXX2JCYkk i modified this probe to your needs. add it to all devices from which you want to monitor ping to 8.8.8.8 actually, i don,t know...

Shadeofspirit

Can you just tell me about Dude. Does it possible to get an alert for maybe ping to create alarms? Just ask because of much queries to router... yes, you can use it. for example i use it to send e-mail for warnings and not very critical events. and most important are also send to telegram. but if y...

Shadeofspirit

Can you just tell me about Dude. Does it possible to get an alert for maybe ping to create alarms? Just ask because of much queries to router... yes, you can use it. for example i use it to send e-mail for warnings and not very critical events. and most important are also send to telegram. but if y...

Shadeofspirit

Can you just tell me about Dude. Does it possible to get an alert for maybe ping to create alarms? Just ask because of much queries to router... yes, you can use it. for example i use it to send e-mail for warnings and not very critical events. and most important are also send to telegram. but if y...

Shadeofspirit

Same problem here. Is there anything that must be done on the CAPsMAN machine EXFCEPT pressing Upgrade?

what RB do you use as CAPsMAN and what as CAPs?
it looks like that they have different architecture. if it is so, it can be solved very easy

Shadeofspirit

i want to show u something but i cant add the attachments .. Please explain me it step by step .. I have below doubts .. Tools>Email Server: Port: From: user: Password: Tools>Email>Send Email> Address: Port: user: Password: To: CC: From: Subject: System>Schedule > what should I enter in these above...

Shadeofspirit

I have 10 mikrotik's and i want take the backup automatically into my gmail . please suggest me the steps . make script and add it ti sheduler script is smth like (you can add to it any information you need: date, identity and so on): /export file="filename" /tool e-mail send to=yourmail@...

Shadeofspirit

Ok, I get it now, thanks! this is my scenario: A >>> B >>>> C A: external ruoter with dhcp and AP B: the mAp should connect to A by wifi C: a pc without wireless that should connect to A To connect C to A I can use: CPE - Short for "Customer Premises Equipment"? yes, CPE is mode when RB i...

Shadeofspirit

Dear Sirs, just bought a mAP lite, connected to his power supply and to ethernet port (the Link led on switch is ON and the Act Led is OFF ) From winbox no neighbour is detected and no direct access to 192.168.88.1. I've set my pc to 192.168.88.100 and no ping back from 192.168.88.1. I've used mAP,...

Shadeofspirit

Hello, I want to buy more pieces of CRS125-24G-1S-2HnD-IN but I see they NOT have rack mount kit. Does anybody know if exist and what is the part number for buy ? Regards, why this? it is not for rack, use CRS125-24G-1S-RM https://mikrotik.com/product/CRS125-24G-1S-RM it is the same (but only witho...

Shadeofspirit

got a weird question - the M.2 slots on the RB3011, any chance they could take (and the the board/software use) something other than an SSD/storage? ie, something like an M.2 LTE card?

can you make a foto? a have 3 rb3011 and there are no m.2 slots in them.

Shadeofspirit

Is there any information about the release date of wsAP ac lite ? and it's price
also it will interesting to know about the release date of other products introduced on MUM in Milan.

Shadeofspirit

In dude change log I saw: *) Server package is now made smaller. Client side content upgrade is now removed from it and is downloaded straight from our cloud. So workstations on which client is used will require access to wan. Alternatively upgrade must be done by reinstalling the client on each ne...

Shadeofspirit

why you don't use RoMON? it is made for that. With it you can access any RB behind your RB gateway without port forwarding

Shadeofspirit

Hi , I am not able to see a nice option for an image for the device HapLite in Dude . So I need to upload an image for my new device Mikrotik Hap Lite . From where can I get an .svg file for my Haplite Device . You can use not only svg but also other graphic files (but it will be better if they wil...

Shadeofspirit

Wake up at RDP connection is easily possible with this: /ip firewall nat add chain=dstnat dst-address=<public address> protocol=tcp dst-port=3389 \ action=add-src-to-address-list address-list=rdp address-list-timeout=<time> add chain=dstnat dst-address=<public address> protocol=tcp dst-port=3389 \ ...

Shadeofspirit

I can suggest you to use vpn, at first it is more secure and the second - you can run scripts on user log in/out Not exacly what I want. I can connect from my work office or from any point of Internet to my Home LAN, but not in every connection need to wake laptop :( look at this Wiki post, i think...

Shadeofspirit

Hello everybody. I want to make automatic of procedure waking up my laptop, when I connecting to it via RDP. I have a port forwarding and script, which waking up my device: tool wol interface=ether5 mac=90:E6:BA:9D:**:** Can I make some rule, which running this script after NAT-Rule is run? Thanks ...

Shadeofspirit

You need to upload the same version dude as your RouterOS version on the CCR (which is 6.36.4). Or upload the new RouterOS version (including all installed optional packages) as well so they will be updated when the reboot is done. which version i must download and install ? Main package or Extra p...

Shadeofspirit

Looks like old good SNMP poller on PC will do better this way! It depends on what do you want to have. I use it for "fast" look on network and services. It sends me telegram notifications on critical events. It is easy to setup and use. for working with logs it is better (at least for me)...

Shadeofspirit

Oh, thank you! But then, how big the database become over a time? What size of card should be used/planned? All depends on how many devices and services you want to monitor, will you save logs in dude or in other log server and so on. For example in my setup about 200 (mostly servers), 3-15 probes ...

Shadeofspirit

on last 3 or 4 versions it was so This is only in connection with The Dude? I mean, may this be due to way The Dude uses disk? if it is, then it is useful to fix The Dude, which is not the case considering the efforts MT put into The Dude during last time. "AHx4 with The Dude" edition fea...

Shadeofspirit

you can try ... try to reboot Will definitely do that but right now I have no spare CCR and I need this info to plan The Dude deployment. Simple to say, do I need to setup separate Dude server or I'll be able to go with CCR. Considering your USB stick, did you tried to use different sticks? If othe...

Shadeofspirit

Yes, after rebooting 3011 even doesn't see this disk in usb devices. There are no problems with plugin other devices. 3011 start to work with this particular usb disk only after low level format of the disk (usual format doesn't help). As for SD card (if i don't make a mistake it is microsd) i think...

Shadeofspirit

Is it possible to have Dude to store its database on external storages, like SD card or USB stick connected to USB port? The device is CCR1009 , it has no dedicated SSD storage but I also don't want to wear out built-in flash with Dude data, so which is the best approach ? Another question is how t...

Shadeofspirit

No, dude server is only on x86, mmips, arm and ccr. Metal is mipsbe

Отправлено с моего Redmi 3S через Tapatalk

Shadeofspirit

Okay, will try it when I get back to the location where the switch is. Should limiting an interface speed work if it's within a bridge group, or could that be causing problems? can you show one of rules? ( /queue simple print) there is one of my and it works good: name="2029" target=192.1...

Shadeofspirit

Thanks for your message. Could you please explain bit more, I can't imagine exactly how can I filter clients by RX level. I suppose groove will be better for any parameter if considering radio, RX will be better just because it has much better antena. About max client number it dosen't sound realis...

Shadeofspirit

I just received the Powerbox - a POE router/switch. If I plug a POE cable into the Powerbox into Port 1 from a POE enabled switch. the Powerbox is not powered up. Although Mikrotik did provide an ethernet splitter, the plug for the power will not fit the power plug in the Powerbox. It does fit into...

Shadeofspirit

The office is currently on one floor. The cables are laid out in every room, and the AP will be at the central office. About 15 people will work (95% of employees prefer wifi) So, as Bonz had said - hap ac or wap ac but if employees (15 people) realy should work with big files very soon they will b...

Shadeofspirit

How many clients and how many rooms, how large a they? As someone on this forum had sad - the first rule while creating wireless network - to be sure that it is impossible to use cabel. I had setup WiFi in 2 small offices with programmers (20-25 developers in each) - i convinced to use wireless only...

Shadeofspirit

Nothing.... The campsman not work... i see the device, see the ssid but wen i try to connect, my client not connect to it... I don't understend were is the problem. For the moment, i set all the access Point with old configuration, (bridge Ethernet+Wi-Fi) but the system don't respond very well. I'v...

Shadeofspirit

About 5ghz: the priority defined only by client - you can't influence on it. Groove has better range, but don't forget that connection has two sides: not only from ap to client, but also from client to ap, so you can try to make access list rules to disconnect usert with particular signal level and ...

Shadeofspirit

looks good.

Shadeofspirit

Hello friends for help me and replay. I test the capsman in my house. I've a RB2011L to set the capsman and i connect it an cAP Lite for test. The system is work very fine. I've set the access list in caps-man ( Rb2011), It's ok this setting rule? In the Hotel, you can recommend me to use the same ...

Shadeofspirit

Hi, in my house i have the following configuration of RB. first... sorry for my bad english 1xRB3011 Rackmount caps manager 1x hAP Lite ac for the half indoor sleeping room etc. as a cap dualwifi 1x hAP ac for the other indoor site living room etc. as a cap dualwifi this APs are mounted 4 Meters ne...

Shadeofspirit

Sorry for late replay. The rules are like signal ranger -79..120 action accept and signal ranger -120..-80 action reject. you should create them in access list. Allow rule will allow to connect users only with good signal and reject rule disconnect with low. Try to test with different ranges - Best ...

Shadeofspirit

1)to set up APs i recommend to use capsman - it will help you to manage/update/etc all points in one place
2) you should make 2 rules: one allow signal better than... second to disconnect with low signal

Отправлено с моего Redmi 3S через Tapatalk

Shadeofspirit

I use 3 DS-2CD3135F-IS cameras with my Hex. I think your camera will be working too. But you should pay attention - Mikrotik recommends for stable POE: Maximum power output of each Ethernet port in this mode is 1A (total maximum for all ports is 2A). To reach maximum output power it is recommended ...

Shadeofspirit

Hello all! I'have a lot of point of sale where we use the mikrotik routers. Some shops have dual WAN interfaces for failover by recursive routing. I want to monitor each of WAN interface thru ping to google DNS. How can i do that by dude? In other words, it is necessary to start the ping from the d...

Shadeofspirit

Hello all! I'have a lot of point of sale where we use the mikrotik routers. Some shops have dual WAN interfaces for failover by recursive routing. I want to monitor each of WAN interface thru ping to google DNS. How can i do that by dude? In other words, it is necessary to start the ping from the d...

Shadeofspirit

solved
(6.39 to 6.39.1 on CHR
dude stoped to see any devices
"connection to agent CHRDUDE not ready (not connected, next attempt at 08:09:18), next attempt at 08:10:20")

Shadeofspirit

Hi, my first topic to post in MT land. I've been doing alot of homework on the setup at my house which I've had since March. Everything is running great. I'm sure my config could be better, and am probably looking at it too much instead of leaving well enough alone. I use winbox remotely to look at...

Shadeofspirit

I have 3 Hikvision POE cameras connected to my RB960PGS. RB960PGS has 2 options to provide POE (Interface->POE->POE out): 1. Auto on 2. Force on My Hikvision cameras worked very unstable with "Auto on" so now I use option "Force on". With this option cameras work good within 6 m...

Shadeofspirit

I first saw this after a reboot also... Trying to think of possible debug options. Mine is at a tower on the hill, so I can't physically test replug. I am glad you tried that. It seems the unit doesn't properly mount the drive some times, but there is no manual command to do that. I had tested it o...

Shadeofspirit

I first saw this after a reboot also... Trying to think of possible debug options. Mine is at a tower on the hill, so I can't physically test replug. I am glad you tried that. It seems the unit doesn't properly mount the drive some times, but there is no manual command to do that. I had tested it o...

Shadeofspirit

Excellent, thanks for the suggestions. The probe tip, the example above and the SNMPWALK tip I found on the internet I was able to add 3 Probes, one for each ADSL line. Perfect. Now I should get a Telegram message when one of the lines are down. I will do a test when at the premises again. Thanks. ...

Shadeofspirit

check log after rebooting and what is in system/packages ?

Отправлено с моего Redmi 3S через Tapatalk

Shadeofspirit

there is a little cheme
https://drive.google.com/open?id=0Bxq9Y ... TRaR0tsVzA
tested it on one of my nets (there are 2 uplinks, l2tp and static address )

Shadeofspirit

you should find sonicwall snmp oid for link state (up or down). Create probe in dude. add it to sonicwall in dude or create a new device in dude (for each adsl link) without ping, just with this new probe. Try to google "dude snmp link state", there are some examples in internet Отправлено...

Shadeofspirit

I'm setting up a Dude server to monitor all the Mikrotik devices in the network, it works really great and I even get Telegram notifications. Next challenge, if possible, is that I want The Dude to monitor my three outgoing ADSL lines. The dude is installed on a local Mikrotik device within the net...

Shadeofspirit

so, i have this problem again. 3011 doesn't see disk (unpluging/pluging doesn't help, as i know from experiments only LOW levwl format of the disk will help) the problem appeared after rebooting RB. the dude was running, the base was on CF card in USB3.0 cardreader Does anybody have the idea how to ...

Shadeofspirit

Thanks for your reply. Below are my configurations. I noticed, that the CAPsMAN forwarding channel shuts down if I connect to the 2.4GHz network. When I connect to 5GHz, the channel works and the display "channel: 2412/20-Ce/gn(20dBm), SSID: MTIK-24, CAPsMAN forwarding" and "channel:...

Shadeofspirit

Please, give capsman config for 2.4

Отправлено с моего Redmi 3S через Tapatalk

Shadeofspirit

Hi, in which format is exported Dude backup?
In the old version (4.x) i know it was TGZ. But now?

Thank you.

it is the same - targz
in archive there is db file and folder "files" (with images, mibs and so on)
you just need to write file extension to backupfile (in windows client)

Shadeofspirit

i have CCR1009-7g Router and i made hotspot bridge and i connected router with d-link DGS-1008D and i connected AP in switch ports and everything is okay, and my phone connected with AP well and there is no problem , ut when i changed d-link DGS-1008D to d-link DGS-1024D and connected AP in switch ...

Shadeofspirit

https://wiki.mikrotik.com/wiki/Manual:T ... _db_repair

Отправлено с моего Redmi 3S через Tapatalk

Shadeofspirit

I'm running Dude on a CCR1036-12G-4S with ros 6.38.5. This system has been running for many months monitoring a fairly large campus. Yesterday I started the Dude client on WIndows and connected to the server. I receive the following message at the bottom of the screen: server status: db failure: da...

Shadeofspirit

When you have a working setup for this would you be so kind as to post it. I had tries to do something similar with a trio of networks as VLANs and VirtualAPs (employee / secure POS / customer and guest Hotspot) and it doesn't really seem to function as I would expect. I set it aside until I could ...

Shadeofspirit

Hello Everyone, I am searching for a very very simple tool that can generate vouchers and send them to my hex no user manager needed, I came across this one http://www.fps-freepossoftware.com/downloads/download-hotspot-pos/ , its what I need but cannot change the printing layout, can anyone help wi...

Shadeofspirit

Noticed Mikrotik is hiring an Android and iOS developer. Wonder if this means we will soon be seeing a Winbox or Dude app on these platforms?

https://mikrotik.com/jobs

there is TikkAPP for android. it is nativ app (not api)
but it is in ALPHA
you can find it in google play

Shadeofspirit

Actually i didn't test it, but when unblock phone it doesn't need to reconnect and the sreen is of all notifications from internet come to the phone У меня пропадает ping при блокировке экрана. Не приходят мессаги из Viber пока не включишь экран. От wi-fi Не отключается, но и не работает. Техсап мо...

Shadeofspirit

https://www.youtube.com/watch?v=nH-nN4Y_dvs Video this problem the only difference between our configs that i had found is that i don't use "superchanel" on my config i use manual for 2.4 and regulatory domain (usa) for 5ghz Your ping vanishes to iphone when the screen is switched off? Ac...

Shadeofspirit

https://www.youtube.com/watch?v=nH-nN4Y_dvs
Video this problem

the only difference between our configs that i had found is that i don't use "superchanel"
on my config i use manual for 2.4 and regulatory domain (usa) for 5ghz

Shadeofspirit

Thanks for the suggestion, I never even knew what CAPSMAN is. Will try it. Unfortunately I can't utilize the PoE out because wAP on the second floor has to connect to the ethernet cabling embedded into the house, which was constructed in 2006 and doesn't have PoE support. But that's not a problem, ...

Shadeofspirit

i never had much luck with the roaming between lower powered devices... i probably did not manage to get the configuration working quite right i would consider going down the route of multiple lower powered ap's but quite afraid of the roaming bit. the only high throughput 5ghz device i have is my ...

Shadeofspirit

as JohnTRIVOLTA had sad, the best way is to use capsman. it will allow to have one place for managing all wifi APs. I suggest to connect wap to the 5-th port of hap ac (on 5th port there is poe out, it will allow to power wap by ethernet). in capsman there will be 2 configs: one for 2,4ghz and one f...

Shadeofspirit

Not helped. Iphone with Mikrotik not work normally a have hap ac lite, there were problems with ipad on 2.4ghz and with iphone 5s both 2.4 and 5ghz but with this config all works good /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-type...

Shadeofspirit

Anyone here have the new wAP ac and UAP AC Pro? How do they compare? Is the wAP ac more like the UAP-AC-Lite? In terms of range and speeds. Been using the UAPs for a while, but the price of the wAP ACs are really good. i think that wap ac is more like uap-ac-lite (but in weatherproof enclosure). th...

Shadeofspirit

For the latest dude manager, i cannot find where is the web setting, anyone can share ?

dude 6.* doesn't have web interface

Shadeofspirit

Experts are requested to kindly guide me through to setup a mikrotik wAP connected to RB3011 on ether1 for a hotspot and a private wifi. what do you want to have? capsman or any other setup? as a variant, you can bridge wlan to your private network and virtual ap to hotspot network but you should r...

Shadeofspirit

add reject and accept rules to access list this can help. (for exmple: signal ranger -79..120 action accept an signal ranger -120..-80 action reject) you can try to find range that will be the best for you I suppose you mean i have to setup CAPsMAN in order to use access lists ? I haven't setup CAP...

Shadeofspirit

General knowledge says that the same frequency and ssid is the fastest for roaming. But to spread in the available spectrum is the best for link quality for small cost of slower roaming. Same Frequency and SSID and using CAPsMAN ? The problem i have noticed is when a client is connected to one AP, ...

Shadeofspirit

as i know export doesn't export MAC (only if you had changed it), also there are no system users and their passwords. if you need mac and users you should use backup, but in this way you can import it only to the device where it was made, even on the same device you can have problems

Shadeofspirit

i have the same problem. but on my 3011 dude works good about mounth. after that usb drive doesn't recognized by mikrotik (only low lewel format of the drive helps) on PC all is ok with flash. I had tested about 8 flashe drivers (both 2.0 and 3.0) - the same problem. The other problem is that i trie...

Shadeofspirit

you can try to use command :log to log event. in log settings make action to log to file and rule that uses this action

Shadeofspirit

the default dude port is 8291, try it

Shadeofspirit

did you start the dude? what is the error of client connection?

Shadeofspirit

What about InWall AP? we have map lite, cap lite with the same board, mb to make based on this board? it can be the ideal solution for places where we should wired network by wifi. there are some solutions from ubiquiti and zyxel, but the "perfect" idea is in noname china ap's - they have ...

Shadeofspirit

try to repair like dude data base
https://wiki.mikrotik.com/wiki/Manual:T ... _db_repair

Shadeofspirit

Hello! I have a lot CAP deployed in my infrastructure, all work fine (Thanks Mikrotik for great solution)!! Now i want to add them to monitoring system! The problem is that i monitor via DUDE for example PING, but there are many cases where ping responds, device works fine but CAP isnt working for ...

Shadeofspirit

yes, that was correct advice - you create hotspot on interface, so you should add open wlan to that interface

Shadeofspirit

There are som local services that are not very secure that should be available from both offices, that is why i should make a tunnel or smth like this

Shadeofspirit

Hi, can anybody help to solve the problem. I have 2 offices, both of them have rb3011, 2 wan (simple failover, different distance in routes). all wans have have static "white" ips. I have ipip tunnel from one office to other and all works good, but this tunnel is managed by one ISP (in ipi...

Shadeofspirit

thank you verymuch... its work. I would like to ask another question, is possible to do this on viber also ?

Thanks.

yes you can. +37544five44340five

Shadeofspirit

Hi,

what should be the chat_id= ??

thanks

after creating the bot you can write to him. from browser you can see the id of this chat (you can use https://api.telegram.org/botXXXXXXXXXXX ... getUpdates )
You should find "«chat»:{«id»:YYYYYYY"
YYYYYYY - is your chat_id

Shadeofspirit

You can delete in "settings" all subnets in Auto scan list and add all networks you need, also you can change the list of services.
https://drive.google.com/open?id=0Bxq9Y ... k01MHl4Mk0

Shadeofspirit

Does anybody have an idea how to change the map or submap of the device? The idea is that i have a map with devices, a little bit later a had made submaps and wont to move some devices from main map to submaps and i can't find where anf how to do that At the moment it's not possible to move devices...

Shadeofspirit

dude v 6.38.1 on rb3011, dude clien on windows 10x64, windows 8.1x64

Search found 204 matches