(Edited) For debugging, maybe it can help if you change ESP to AH at IPsec policy.
If the packet lose persist, you can at least use Wireshark to look into the packet.
Using Radius Attribute "Mikrotik-Rate-Limit" you can assign a queue dynamically. https://wiki.mikrotik.com/wiki/Manual:R ... AttributesI'm using radius and the way u do just will assign to simple queues.
We have provided online courses during Spanish lock down, but certification exams should be in person.Any Plan for Online Training/Certifications???
[ironic]I became a Trainer just for using the coffe-machine in Latvia offices[/ironic]In general, attending a MUM or any other conference is about knowledge transfer and networking, also for you ?
I didn't read you were using a CRS. You can consider using RB4011 as BRAS. It's affordable and can handle several hundreds of sessions.Do you have a good tip for a Linux BRAS router?
/ppp profile add name="pppoe-profile" local-address=10.1.1.1 remote-address=pppoe-pool dns-server=184.108.40.206
NetFlow does not have sampling rate.Google took me here.
cant find a setting for sampling rate.
In the link you provide, it is stated that mikrotik is not affectedHello !
Is Router OS vulnerable to the CVE-2020-8597 ?
Then you should put here complete configuration, not only the one you stated.Fast forward is no use, its a switch with more than 2 interfaces
interface ethernet switch set switch1 cpu-flow-control=no
Check IP address (/32) of both ends appears on routing tablevpls one side is up and other end is down help please, i have checked LDP and MTU on both routers but still its the same and i m stuck
Well, not exactly because this is not OSPF-v3... it is (sorry for the mistake):
/routing ospf interface add interface=all passive=yes
/routing ospf interfaces add interface=all area=backbone passive=yesNot as easy when you have a few hundred vlans. Not bad to script but would be nice to have a simple checkbox to automatically have all interfaces as passive and then add the ones you want.
Isn't it the existing Session -> Close Windows?A feature I would like to see in Winbox is a new selection to close all winbox windows
Example - many many windows open in winbox , click close-all and presto they all close and you still have your connected winbox session
North Idaho Tom Jones
Sorry @maznu but I don't get the same md5sum you expected. Maybe mine is a different but correlated attackThis sounds almost exactly the same as what MikroTik will be fixing on Monday.
What would be characters 9, 10, 11, 12 of the md5sum?
/ip firewall mangle add action=set-priority chain=output new-priority=5 out-interface=vlan2
/ip address add interface=ether1 address=220.127.116.11 network=18.104.22.168 /ip route add dst-address=0.0.0.0/0 gateway=22.214.171.124
/ip route add gateway=[ip_default_gateway]
Code: Select all
/ip route add dst-address=10.10.11.0/24 gateway=192.168.60.2
/ip route add dst-address=10.10.11.0/24 gateway=192.168.60.6