Community discussions

MikroTik App

Search found 21 matches

by Hamsterman
Mon Jun 10, 2019 1:47 am
Forum: General
Topic: Feature Request: GUI supported Let's Encrypt with SSL Offloading
Replies: 3
Views: 1250

Re: Feature Request: GUI supported Let's Encrypt with SSL Offloading

Thanks for the reply.

Could you recommend an alternative - maybe some simple SSL offloading firewall I can route all 443 traffic throu?
by Hamsterman
Sun Jun 09, 2019 8:54 pm
Forum: General
Topic: Feature Request: GUI supported Let's Encrypt with SSL Offloading
Replies: 3
Views: 1250

Feature Request: GUI supported Let's Encrypt with SSL Offloading

I am a big fan of Let's encrypt mainly because the certificate administration is so much easier. I propose that RouterOS gets on the Let's Encrypt bandwagon and support easy certificate handling with SSL offloading capabilities directly from the GUI. I think the feature should work like this 1) In t...
by Hamsterman
Mon Mar 04, 2019 11:09 pm
Forum: Beginner Basics
Topic: 2 firmware update locations ?
Replies: 7
Views: 790

Re: 2 firmware update locations ?

For some reason my firmware won't upgrade - any ideas?

Model RouterBOARD 3011UiAS
Serial Number 689A05E7C324
Firmware Type ipq8060
Factory Firmware 3.27
Current Firmware 6.44
Upgrade Firmware 6.44

I tried both UI and Terminal.
Yes I have rebooted :)
by Hamsterman
Mon Mar 04, 2019 8:47 pm
Forum: Beginner Basics
Topic: 2 firmware update locations ?
Replies: 7
Views: 790

Re: 2 firmware update locations ?

99% of the time, the Firmware has no effect on existing devices. But keeping it up to date is good, in case there is something that really affects your device.
Thank you!
by Hamsterman
Mon Mar 04, 2019 9:26 am
Forum: Beginner Basics
Topic: 2 firmware update locations ?
Replies: 7
Views: 790

2 firmware update locations ?

I got a MikroTik RouterBOARD 3011UiAS and have been updating to the Stable channel here: http://x.x.x.x/webfig/#System:Packages.Check_For_Updates Installed Version 6.43.8 Latest Version 6.44 But I have noticed that there is another place as well http://x.x.x.x/webfig/#System:Routerboard Factory Firm...
by Hamsterman
Sun May 07, 2017 9:07 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

This issue was never solved but - when I asked my Internet Provider for two IPs within the same network it worked almost out of the box. They had to do some stuff (which I never found out) before it worked. So there are two possiblities. Either it would never have worked with two IPs in two differen...
by Hamsterman
Tue May 02, 2017 10:04 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

change

dst-address=2.2.98.193

to

dst-address=2.2.98.206
Still no luck I am afraid
by Hamsterman
Tue May 02, 2017 9:22 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

2 chain=dstnat action=dst-nat to-addresses=192.168.5.15 dst-address=2.2.98.193 in-interface=ether1 log=no Hamsterman: In the above rule, you are forwarding all traffic directed at the gateway 2.2.98.193 to 192.168.5.15. I think that what you really want to do is forward traffic directed to your IP ...
by Hamsterman
Tue May 02, 2017 8:28 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

Hamsterman: Please post /ip route print detail This way I can see routemarks/routing tables [admin@MikroTik] > /ip route print detail Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf> B - blackhole, U - unreachable, P - prohibit 0 A S dst-address=0.0...
by Hamsterman
Tue May 02, 2017 10:52 am
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

Thanks for your reply. This is now my current configuration. Still no luck with either incomming or outgoing traffic. [admin@MikroTik] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; defconf 192.168.5.1/24 192.168.5.0 ether2-master 1 D 1.1.194.166/...
by Hamsterman
Sat Apr 29, 2017 7:23 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

HI there the reason is that you are addressing next hop router with wrong src IP as told you before: the reason is that gateway because spoofing avoidance reason will normally check the src public ip address of packets they receive to route (according with interface) My humble suggestion is to impl...
by Hamsterman
Thu Apr 27, 2017 11:13 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

You do not have to make different subnet You need to make src and dst NATS manually # traffic from the particular PC goes via new public IP # all others go via old public ip add action=src-nat chain=srcnat src-address=192.168.5.15 out-interface=ether1 to-addresses=2.2.98.193 add action=src-nat chai...
by Hamsterman
Wed Apr 26, 2017 9:00 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

@BartoszP Should remove the masquerade and the custom routes ?
by Hamsterman
Wed Apr 26, 2017 1:52 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Re: Addition public IP

Alright - could you be more explicit in what commands I need to try out. It's like I have tried everything.
by Hamsterman
Tue Apr 25, 2017 2:03 pm
Forum: Beginner Basics
Topic: Addition public IP
Replies: 19
Views: 1953

Addition public IP

I got an extra public IP from my internet provider. Basically I want to route traffic to and from that new IP to a specific computer on my local network. I have tried all kind of different stuff and guides but it seems I can't get it right. Below is my setup Both old and new public IP have been chan...
by Hamsterman
Sun Nov 27, 2016 8:00 pm
Forum: Beginner Basics
Topic: Setup of ntop
Replies: 1
Views: 1583

Setup of ntop

I am having some issues setting up ntop and getting proper flow stats. I have setup my router to enable Traffic_Flow. And I have setup a Target: 192.168.5.15, port: 2055, version 9 On my traffic host (192.168.5.15) I have installed nprobe: nprobe.exe /i nProbe --zmq "tcp://*:5556" -i 0 -n 192.168.5....
by Hamsterman
Mon Jul 18, 2016 3:18 pm
Forum: General
Topic: [Feature Request] 1-click iphone VPN server setup
Replies: 6
Views: 1624

Re: [Feature Request] 1-click iphone VPN server setup

And BTW RouterOS does not support letsencrypt yet.
I guess that would be a required feature before my "magic one click" feature.
Any time frame on the letsencrypt support?
by Hamsterman
Mon Jul 18, 2016 3:17 pm
Forum: General
Topic: [Feature Request] 1-click iphone VPN server setup
Replies: 6
Views: 1624

Re: [Feature Request] 1-click iphone VPN server setup

What about asking Apple for minimal click support?
Uhhh. I forgot they don't give a damn if it pertains 3-rd party products.
I could not agree with you more. But thats the world we live in I am afraid.
by Hamsterman
Mon Jul 18, 2016 3:16 pm
Forum: General
Topic: [Feature Request] 1-click iphone VPN server setup
Replies: 6
Views: 1624

Re: [Feature Request] 1-click iphone VPN server setup

Everyone wants single click magic wand tools to do whatever they do not understand - a pure magic...
I agree. But I can settle for less. I just wanted to put the idea out there. Maybe others would like it as well.
by Hamsterman
Thu Jun 30, 2016 9:16 pm
Forum: General
Topic: [Feature Request] 1-click iphone VPN server setup
Replies: 6
Views: 1624

[Feature Request] 1-click iphone VPN server setup

I wanted to use my iphone as a VPN client and the RouterOS as the VPN server. I googled a bit and found rather complex guides to do this. What I really would like is a very simple way to setup the VPN server (eg. by using letsencrypt.org to generate the certificate). This feature should also auto up...