Community discussions

MikroTik App

Search found 261 matches

by boardman
Wed Jul 01, 2020 10:31 pm
Forum: RouterBOARD hardware
Topic: Powerbox Pro overload detection
Replies: 8
Views: 3521

Re: Powerbox Pro overload detection

I found a hacky fix to this problem, but it works and can be done remotely. The only catch is you have to have one spare PoE port. Set the spare port to have PoE output forced on, and set the PoE priority lower than the other ports. When overload is detected, it will disable PoE on the spare port a...
by boardman
Mon Dec 10, 2018 10:45 pm
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1985

Re: Renew IP address of PPPoE client

Hello friend, how have you managed to change the ip every so often to pppoe customers?
Haven't tried it yet...
by boardman
Sat Dec 08, 2018 10:56 pm
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1985

Re: Renew IP address of PPPoE client

Thanks, will try this.
by boardman
Sat Dec 08, 2018 4:42 am
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1985

Re: Renew IP address of PPPoE client

Thanks for your answer, What do you mean with "I tested before and its change" "divide your ip pool in many pool, I tested before and its change when device disconnect and connect again" Sorry, I don't understand what you mean, I understand on how to divide into many pools but the rest of the phrase...
by boardman
Thu Dec 06, 2018 7:29 pm
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1985

Re: Renew IP address of PPPoE client

Hello,

try to first remove his entry in the DHCP Lease, and then reconnect it.
Thanks for your reply, but this is PPPoE not DHCP, IP's are taken from an IP-pool, not DHCP

Still stuck on this one.

Best
by boardman
Thu Dec 06, 2018 12:28 am
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1985

Re: Renew IP address of PPPoE client

Hello,

Did you ever found the solution for this?

Best
by boardman
Wed Aug 01, 2018 9:43 pm
Forum: RouterBOARD hardware
Topic: Powerbox Pro Grounding
Replies: 12
Views: 4782

Re: Powerbox Pro Grounding

Hello,

PowerBoxPro metal grounding screw is only connected to SPF and DC negative! It is not connected to metal grounding of LAN ports! Design error?
Anybody? Same question here....
by boardman
Fri Apr 07, 2017 1:49 am
Forum: General
Topic: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)
Replies: 205
Views: 157358

Re: Suricata IDS/IPS integration with Mikrotik

Nice !!!

Thanks
by boardman
Tue Sep 13, 2016 1:24 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

MetaGeek, certainly can do the job. the problem is you have to climb a tower install the spectrum scanner, do your tests, select the best channel, next week all the wireless check-board has shifted, you have to climb again, install the scanner, do your tests, select best channel... 2 months later sa...
by boardman
Mon Sep 12, 2016 9:31 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Let's keep praying for this before the hell freezes over ... :lol: Can't be more agree Priority should be like: no. 1: Spectral scan / history on ac units. no. 2: Spectral scan / history in background for ANY wireless unit. no. 3: Sync no. 4; SSID (and other) identifying capability included in the s...
by boardman
Tue Aug 16, 2016 1:39 am
Forum: General
Topic: Can not Restore a Backup file
Replies: 8
Views: 22726

Re: Can not Restore a Backup file

If you leave an empty password, but you use encryption, the password is the encryption password (you password for admin access at moment of creating the backup). you must use at least the same version for recover it. Hello On "empty password" backup you need to use the password of the user who crea...
by boardman
Mon Aug 15, 2016 5:11 pm
Forum: General
Topic: 802.11ac spectral scan
Replies: 158
Views: 38206

Re: 802.11ac spectral scan

RB6.37 RC with wireless package, still no spectral history. Will probably join others in abandoning MikroTik. This feature is a necessity.
Me too.
by boardman
Mon Aug 08, 2016 10:36 pm
Forum: General
Topic: 802.11ac spectral scan
Replies: 158
Views: 38206

Re: 802.11ac spectral scan

Chirp .... Chirp ..... Chirp ......
by boardman
Wed Jun 22, 2016 5:24 pm
Forum: Wireless Networking
Topic: RX drop from 300Mbps to 6Mbps
Replies: 6
Views: 2986

Re: RX drop from 300Mbps to 6Mbps

Hello,

Did anybody ever found the cause / solution to this? We are experiencing the same behavior with two NetMetal 5 links, 

Best
by boardman
Sat May 14, 2016 3:44 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Totally agree, but don't forget 10MHz support for AC chipsets We can't install last products (Netmetal, mantbox, dynadish...), cause spectrum here is hardly congested, and we must use 10MHz channel on PtP and PTMP links "Isn't supported by hardware" isn't a convincent answer. The U brand supports s...
by boardman
Sat May 14, 2016 2:07 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Can't be more agree Priority should be like: no. 1: Spectral scan / history on ac units. no. 2: Spectral scan / history in background for ANY wireless unit. no. 3: Sync no. 4; SSID (and other) identifying capability included in the same spectral scan process. no. 5: Power output reading in ac units...
by boardman
Fri Mar 18, 2016 1:59 am
Forum: Forwarding Protocols
Topic: MPLS / VPLS and TE Tunnels
Replies: 7
Views: 3942

Re: MPLS / VPLS and TE Tunnels

Did anybody ever found a solution to this, I'm stuck at the same spot.
by boardman
Fri Mar 18, 2016 1:02 am
Forum: General
Topic: 802.11ac spectral scan
Replies: 158
Views: 38206

Re: 802.11ac spectral scan

Chirp chirp chirp .... Mikrotik anything to say ?
by boardman
Tue Mar 08, 2016 8:34 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Can't be more agree

Priority should be like:
no. 1: Spectral scan / history on ac units.
no. 2: Spectral scan / history in background for ANY wireless unit.
no. 3: Sync
no. 4; SSID (and other) identifying capability included in the same spectral scan process.
no. 5: Power output reading in ac units.
by boardman
Tue Mar 08, 2016 12:47 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Yes indeed !!!
by boardman
Sun Mar 06, 2016 6:18 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Should we keep dreaming ? !!!!
by boardman
Sat Mar 05, 2016 11:01 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

Absolutely !!!
by boardman
Sat Mar 05, 2016 2:52 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

by normis » Tue Nov 11, 2014 3:42 pm
It looks like we can implement Spectral Scan, but it will take some time. It is on our to-do list


Got to be a very loooooooong to-do list isn't it?
by boardman
Fri Feb 19, 2016 8:24 pm
Forum: General
Topic: 802.11ac spectral scan
Replies: 158
Views: 38206

Re: 802.11ac spectral scan

Mikrotik, Any comments?
by boardman
Wed Oct 28, 2015 4:02 am
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 32465

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS

I'm having the same problem here, but i'm connecting two CCR 1016, I saked about that to mikrotik's support and they told me to ground the ports property i did that and it stops to get FCS error, but a had to reboot the CCR and the FCS erros comes back. I Just try a sollution and it seems to stops ...
by boardman
Sun Oct 18, 2015 12:12 am
Forum: General
Topic: 802.11ac spectral scan
Replies: 158
Views: 38206

Re: 802.11ac spectral scan

It looks like we can implement Spectral Scan on existing devices, but it will take some time. It is on our to-do list
Will this row on the "to do" list, getting closer or getting farther? It's been a while ....isn't it?

Regards
by boardman
Fri Oct 09, 2015 1:39 am
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 32465

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS

If there are no (late) collisions we can probably exclude duplex mismatch and related stuff (maybe worth a double check anyway), so the most likely causes can be (copy/paste): FCS or File Check Sequence Errors, are one of the more common errors found in a network. When packets are transmitted and r...
by boardman
Thu Oct 08, 2015 12:49 am
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 32465

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS

We still having the FCS issues on this particular AF24 and CCR .... Any other experiencing the same? Any ideas?
by boardman
Tue Sep 08, 2015 8:35 pm
Forum: The Dude
Topic: Online petition for mikrotik release the Dude source code
Replies: 5
Views: 2960

Re:

OK, what should I do, delete it?

Perhaps more people share their vote this way ... ;)
Sure it is.
by boardman
Tue Sep 08, 2015 8:24 pm
Forum: The Dude
Topic: Online petition for mikrotik release the Dude source code
Replies: 5
Views: 2960

Re:

Don't know, is it?
Isn't this topic here twice?
by boardman
Tue Sep 08, 2015 7:47 pm
Forum: The Dude
Topic: Online petition for mikrotik release the Dude source code
Replies: 5
Views: 2960

Re: Online petition for mikrotik release the Dude source code

The Dude is a extremely powerfull application developed by Mikrotik to manage and monitor network devices running SNMP protocol. For years its development is stopped and mikrotik keep it for it self. This petition is at the same time a tribute and a ultimate request for Mikrotik to release the sourc...
by boardman
Tue Jul 21, 2015 10:26 pm
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 32465

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS

Same situation here,

I had enabled Tx and RX Flow control at the CCR, no RX FCS errors so far, few hours ... will see how it goes AF24 using version 2.0, CCR using version 6.24

JB
by boardman
Sun May 10, 2015 9:31 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 31835

Re: AC equipment and spectral scan problem

BUMP It looks like we can implement Spectral Scan, but it will take some time. It is on our to-do list Any Idea when this will be done (or on top of the todo list... it's causing us to look at other hardware for the AC gear) I put all ac purchase on a hold just because of that. How can I install dev...
by boardman
Tue Jun 24, 2014 2:17 am
Forum: General
Topic: CCR1036 - Queue Tree low speed
Replies: 13
Views: 6055

Re: CCR1036 - Queue Tree low speed

BUMP
by boardman
Wed Feb 26, 2014 9:40 pm
Forum: Wireless Networking
Topic: Off topic
Replies: 0
Views: 708

Off topic

Hello

Sorry if I am asking on the wrong site, but do any of you have work with Exalt ExtendAir Microwave licensed systems? Any reference? Are they good, bad, average?

Thanks

J. Boardman
by boardman
Wed Jan 22, 2014 9:41 pm
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

CCR 6.3 Anything else, 6.6 (based on personal testing and deployment) Our main CCR which is the gateway for our entire network has now been in production for around 1.2 years. We used 6.0 RC6, RC11 and 6.3 only. All were stable. We have 6.7 on our backup CCR and haven't seen any issues with it... h...
by boardman
Tue Jan 21, 2014 10:03 pm
Forum: General
Topic: CCR1036 - Queue Tree low speed
Replies: 13
Views: 6055

Re: CCR1036 - Queue Tree low speed

We had similar problem on CCR with 36cores. We have about 2000 SQ with PCQ defined. Internet speed and ping goes rapidly down when the traffic is huge, especially in the evening. One of the 36 cpu's had permanently 100% used in huge traffic. Support told me to use torrents with multiple connections...
by boardman
Tue Jan 21, 2014 9:18 pm
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

CCR collecting dust for now until a reliable ROS version ... our good old Dell Poweredge x86 ROS 5.25 back on duty .... no more issues no more angry customers ...

It's a shame such a nice piece of hardware not being used ...

Thanks

JB
by boardman
Mon Jan 20, 2014 10:41 pm
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

It depends on the platform... What I can tell you is, that on the CCR there is no Version, which is really stable. We had a lot of issues with flapping ports, Negotiation problems and unresponsive routers. Just yesterday we had a "locked up" CCR1016 again. - Mat It is a BIG shame FLAG Mikrotik's fl...
by boardman
Sun Jan 19, 2014 9:12 pm
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

It depends on the platform... What I can tell you is, that on the CCR there is no Version, which is really stable. We had a lot of issues with flapping ports, Negotiation problems and unresponsive routers. Just yesterday we had a "locked up" CCR1016 again. - Mat It is a BIG shame FLAG Mikrotik's fl...
by boardman
Sat Jan 18, 2014 2:49 am
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

[/quote] Do you have some Scheduled scripts running?[/quote] Yes, a few the ones that send by email auto-backup , export, export compact, a DNS cache cleaner ... exactly the same scripts that I have in 20 more routers, exactly the same scripts that have been running for the last 3 yrs. on the ROS 5....
by boardman
Sat Jan 18, 2014 12:33 am
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

We attempted 6.7 in our cloud cores yesterday and the results were a rolling disaster. Our core router locked up twice today requiring a power cycle and dns responses were erratic throughout our network. 3000 unhappy customers. Its been a long day. We rolled all the routers back to 6.3 and everythi...
by boardman
Sat Jan 18, 2014 12:32 am
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

This router has PPPoE, MPLS, OSPF, VPLS, BGP, several Mangle and Firewall rules, Queuetree for customer's bandwidth shaping, On ROS 6.7 unreliable, we used to have a Dell x86 with the same configuration with ROS 5.xx not a problem ever .... CCR + current ROS 6.x very disappointing so far. May need ...
by boardman
Sat Jan 18, 2014 12:28 am
Forum: General
Topic: CCR1036 - Queue Tree low speed
Replies: 13
Views: 6055

Re: CCR1036 - Queue Tree low speed

Currently we suggest to use simple queues - one per each customer on CCRs. We are continiusly improving our software performance on CCR devices, one of the things that we plan to improve in nearest futureis HTB Global performance. At this point we are finalizing ppp improvements that shows up to 16...
by boardman
Fri Jan 17, 2014 1:34 am
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

My router is an x86 PC with 6.6, and it's working fine so far, but it doesn't use most of the aforementioned features. Previous versions had a few minor issues that affected my setup, and were fixed at that version. Thanks for your reply, but it seems this seems to be affecting CCR router only ... ...
by boardman
Fri Jan 17, 2014 1:12 am
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Re: Currently best and stable V.6 ROS?

This router has PPPoE, MPLS, OSPF, VPLS, BGP, several Mangle and Firewall rules, Queuetree for customer's bandwidth shaping, On ROS 6.7 unreliable, we used to have a Dell x86 with the same configuration with ROS 5.xx not a problem ever .... CCR + current ROS 6.x very disappointing so far. May need t...
by boardman
Thu Jan 16, 2014 10:44 pm
Forum: General
Topic: Currently best and stable V.6 ROS?
Replies: 21
Views: 6427

Currently best and stable V.6 ROS?

Hi there, Currently which one is the best or the "more stable" version of ROS 6.X for a CCR1036-12G-4S, currently running 6.7 but we have had some issues, router became unresponsive one time, other day all interfaces, queues, firewall rules disappeared from winbox and console, we rebooted but the ru...
by boardman
Wed Jul 31, 2013 7:54 pm
Forum: Forwarding Protocols
Topic: VPLS one end up, one end down.. not working
Replies: 6
Views: 3412

Re: VPLS one end up, one end down.. not working

Glad it is resolved - sorry I didn't see the original post sooner.

Thanks !!!!
by boardman
Mon Jul 22, 2013 7:52 pm
Forum: Forwarding Protocols
Topic: VPLS one end up, one end down.. not working
Replies: 6
Views: 3412

Re: VPLS one end up, one end down.. not working

Thanks, this issue is solved, it was a LDP interface on router A, I forgot to add it. Exact as you mentioned ...

Jorge
by boardman
Tue Jul 16, 2013 1:33 am
Forum: Forwarding Protocols
Topic: VPLS one end up, one end down.. not working
Replies: 6
Views: 3412

Re: VPLS one end up, one end down.. not working

Few things Are the remote peer adresses routable to each other and have you verified with pings? Have you configured and enabled LDP? Is the MPLS MTU the same on all devices? Thanks for the reply. Here are the traces from each direction ... From MAIN to B [admin@APL Mainrouter] /tool> trace 172.16....
by boardman
Mon Jul 15, 2013 8:49 pm
Forum: Forwarding Protocols
Topic: VPLS one end up, one end down.. not working
Replies: 6
Views: 3412

VPLS one end up, one end down.. not working

Weird things happening …. Hello guys, we have a setup of routers, connected using ospf, mpls, BGP and vpls, a segment of that network goes from router MAIN to router B passing through a "Core" router and a "A" router through two point to point links. Connectivity from MAIN to B appears to be perfect...
by boardman
Fri Jun 28, 2013 4:42 pm
Forum: General
Topic: rb133c NOT responding after upgrade to 6.0rc3
Replies: 19
Views: 5212

Re: rb133c NOT responding after upgrade to 6.0rc3

Ok, thanks
by boardman
Fri Jun 28, 2013 12:20 am
Forum: General
Topic: rb133c NOT responding after upgrade to 6.0rc3
Replies: 19
Views: 5212

Re: rb133c NOT responding after upgrade to 6.0rc3

Too late, few RB133c unuseable after ROS6.1 installed ... replaced some by RB411 and some with NSM5.

Cost, crew, time, upset customers involved ..... Next time please ADVICE on download or changelog.

JB
by boardman
Thu May 02, 2013 4:53 am
Forum: General
Topic: Wierd problems with Winbox
Replies: 6
Views: 3945

Re: Wierd problems with Winbox

Did you found the solution to this issue?

I am experiencing it on every router that is connected thru a VPLS .... any ideas?

J. Boardman
by boardman
Sun Mar 03, 2013 8:23 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

I should have reported what we found. It was a rogue router on the network generating that traffic. When we disconnected it, the traffic disappeared. From memory it was a D-link, apparently a firmware upgrade fixed the issue. Sorry to be so vague, that's all I really recall. Thanks a lot for the he...
by boardman
Sun Mar 03, 2013 8:21 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

Little PPPoE discovery traffic. PPPoE session traffic dominated by exchanges involving a Dell, Fortinet and TP-Link device. Does that make sense? Use my email if easier to explain situation. Hi, thanks for offering your help, Yes I, somehow found what you are mentioning, a Dell, a Fortinet and TP-L...
by boardman
Sat Mar 02, 2013 8:34 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

Can you grab some of the traffic to a pcap file? Here is a Packet Sniffer file pcap_all.zip with all MAC protocol filter disabled on ether1 pcap_pppoe_disc.zip is a a Packet Sniffer file with all MAC protocol filter enabled except pppoe-discovery on ether1 pcap_pppoe_sess.zip is a a Packet Sniffer ...
by boardman
Sat Mar 02, 2013 8:05 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

complicated? just run Packet Sniffer on necessary interface with saving to file :) Oh, not technically complicated, what is complicated is this network segment is inside Mexico's customs building, in a very sensitive area, what's complicated is to obtain all the necessary permits to access the prem...
by boardman
Sat Mar 02, 2013 8:03 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

complicated? just run Packet Sniffer on necessary interface with saving to file :) Oh, not technically complicated, what is complicated is this network segment is inside Mexico's customs building, in a very sensitive area, what's complicated is to obtain all the necessary permits to access the prem...
by boardman
Sat Mar 02, 2013 7:43 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

It's going to be complicated but I'll try.

JB
by boardman
Sat Mar 02, 2013 6:59 pm
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

Anyone?

Regards

J. Boardman
by boardman
Sat Mar 02, 2013 5:02 am
Forum: General
Topic: eth. protocol 8864 (pppoe) hitting physical interface
Replies: 22
Views: 7002

Re: eth. protocol 8864 (pppoe) hitting physical interface

Does anybody found an answer to this issue? We are experiencing exactly the same...

Regards

J. Boardman
by boardman
Fri Jan 11, 2013 6:45 pm
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

Any idea why? prepend=3 not enough? maybe prepend=10 should do it? ... I am not receiving full routes from ISP's should I ask them to forward those to me? I'd suggest that you need to advertise your allocated /20 route (216.150.32.0/20). If your router will handle it, you can also ask your provider...
by boardman
Fri Jan 11, 2013 6:44 pm
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

If you peer With an AS'nr you should always get the full Internett BGP table from Your peer. Its a bit memory consuming, but to one peer 1 gig would do. 2 peer, should be ok with about 2gig memory. The bgp route, would always take the AS path with shortest distance. If you have a default route (0.0...
by boardman
Fri Jan 11, 2013 2:56 am
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

Thanks for your kind reply samsun172 If you see the first post, my router configuration is exactly as the example you are mentioning, I used precisely that one. But for some reason I can't find there's traffic on both ISP links; I have sixteen /24 networks, first set of 8 I want to get feed by ISP1 ...
by boardman
Fri Jan 11, 2013 2:25 am
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

Anyone ?

Thanks
by boardman
Wed Jan 09, 2013 8:14 pm
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

Yep. Default expected behaviour. You are receiving two routes, with equal path length and cost. If you want to distribute your traffic between your two peers, you will need to receive full routing tables from both your providers. BGP will then use AS Path length to determine which provider to use f...
by boardman
Wed Jan 09, 2013 8:13 pm
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

I dont see the problem, this is the behavior I would expect with two default routes received via BGP. You cannot have two active routes to the same prefix with BGP, it does not support ECMP natively. Thanks, that is what I had in mind but wanna be sure, what's the best way you recommend to balance ...
by boardman
Wed Jan 09, 2013 12:50 am
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

Re: BGP Multihomed - One route INACTIVE

BUMP
by boardman
Tue Jan 08, 2013 9:50 pm
Forum: Forwarding Protocols
Topic: BGP Multihomed - One route INACTIVE
Replies: 14
Views: 7334

BGP Multihomed - One route INACTIVE

Hello, I a trying to do BGP peering with two bandwidth providers, according to example http://wiki.mikrotik.com/wiki/Manual:Simple_BGP_Multihoming en el setup que se llama “Load Sharing”. My problem is one of the dynamic obtained routes is inactive /ip route> print Flags: X - disabled, A - active, D...
by boardman
Fri Jun 15, 2012 8:05 pm
Forum: General
Topic: latency in PPPoE connections
Replies: 3
Views: 1072

Re: latency in PPPoE connections

Hi Fabricio, did you found an answer to this issue? We are experiencing the same here.

Regards

J. Boardman
by boardman
Thu Feb 16, 2012 6:48 pm
Forum: General
Topic: Netinstall on RB411R and RB750
Replies: 38
Views: 13470

Re: Netinstall on RB411R and RB750

My router board 750 seems totally bricked. Booted with the reset button pressed do nothing, none beep, no blink, all the leds get on, only act is off. Any suggestion is welcome, thanks. Our's too, was fine, upladed 5.13 .npk file, reboot ... then bricked ... connected port LED is ON, then all LED t...
by boardman
Wed Feb 15, 2012 8:07 pm
Forum: General
Topic: Netinstall on RB411R and RB750
Replies: 38
Views: 13470

Re: Netinstall on RB411R and RB750

My router board 750 seems totally bricked. Booted with the reset button pressed do nothing, none beep, no blink, all the leds get on, only act is off. Any suggestion is welcome, thanks. Our's too, was fine, upladed 5.13 .npk file, reboot ... then bricked ... connected port LED is ON, then all LED t...
by boardman
Sat Feb 11, 2012 8:42 pm
Forum: General
Topic: How to limit PPPoE connection request attack?
Replies: 35
Views: 11399

Re: How to limit PPPoE connection request attack?

BUMP !!!
by boardman
Fri Aug 05, 2011 1:52 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 7495

Re: will work this PTP 50km link?

Cool, subelas ...!!!! -- Upload those images... very helpfull for everybody ... Thanks
by boardman
Fri Aug 05, 2011 12:15 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 7495

Re: will work this PTP 50km link?

Good post.
by boardman
Thu Aug 04, 2011 12:41 am
Forum: The Dude
Topic: 3.5 Syslog stop working?
Replies: 7
Views: 2405

Re: 3.5 Syslog stop working?

Hi roadracer96

Were you able to fix this?

Regards
by boardman
Sat Jul 09, 2011 5:20 pm
Forum: The Dude
Topic: cpu & memory probes
Replies: 8
Views: 2160

Re: cpu & memory probes

We had similar sort of problems when we were monitoring 300-400 devices with a single Dude machine (Win XP - I think). We tried to figure out the problem and couldn't pin it down to CPU, Memory or network throughput. It was a problem that was very intermittent and we could not pin-point what the ca...
by boardman
Sun Jun 26, 2011 8:38 pm
Forum: General
Topic: QoS nat limiting with pcq and QT
Replies: 10
Views: 6024

Re: QoS nat limiting with pcq and QT

I find it easier to just use different chains and interface directions. To me it Is also easier and cheaper on the CPU to just mark packets if queues are the only purpose of marking, and you have few qualifiers. I use this on NAT routers, and speeds are correctly shaped both ways. Technically you c...
by boardman
Sun Jun 12, 2011 8:00 pm
Forum: The Dude
Topic: cpu & memory probes
Replies: 8
Views: 2160

Re: cpu & memory probes

Local and Remotes, no difference.
by boardman
Sun Jun 12, 2011 4:18 pm
Forum: The Dude
Topic: cpu & memory probes
Replies: 8
Views: 2160

Re: cpu & memory probes

mmmmmmmmmmmm



Go to control panal >>> System >>> advanced >>> performense >>> Then choose adjust the best performense


Try It

Hi, thanks for your reply, that's the way it is, and the way it was ... any other idea ?
by boardman
Fri Jun 10, 2011 7:17 pm
Forum: The Dude
Topic: cpu & memory probes
Replies: 8
Views: 2160

Re: cpu & memory probes

The dude is running on a dedicated Dell Poweredge 650 server / win XP.

The monitored gear we are having issues with those two probes are routerOS different hardware, X86 & Routerboards


Regards
by boardman
Thu Jun 09, 2011 10:44 pm
Forum: The Dude
Topic: cpu & memory probes
Replies: 8
Views: 2160

cpu & memory probes

cpu & memory probes sometimes (more than desired) give false positives.


J. Boardman
by boardman
Sat May 07, 2011 10:27 pm
Forum: General
Topic: QoS nat limiting with pcq and QT
Replies: 10
Views: 6024

Re: QoS nat limiting with pcq and QT

Nice


Thanks
by boardman
Fri Oct 01, 2010 7:11 pm
Forum: SwOS
Topic: Dumb question?
Replies: 4
Views: 2763

Re: Dumb question?

For example, 32k f/s means that this port will not forward more than 32'000 broadcast frames per second. Unicast option means whether unicast frames without MAC address entry in host table will be treated as broadcast frames. Thanks again for the answer, ok 32k f/s understood, but which one should ...
by boardman
Tue Sep 28, 2010 6:06 pm
Forum: SwOS
Topic: Dumb question?
Replies: 4
Views: 2763

Re: Dumb question?

http://wiki.mikrotik.com/wiki/SwOS#Forwarding_Tab[quote]Storm Rate - Limit the number of broadcast packets transmitted by an interface Include Unicast - Include unicast packets without an entry in host table in Storm Rate limitation [/quote] Thanks for the reply, I know the definitions of the terms...
by boardman
Tue Sep 28, 2010 6:03 pm
Forum: SwOS
Topic: SwOS version 1.2 released!
Replies: 41
Views: 18532

Re: SwOS version 1.2 released!

For the ping issue, I added static arp entries for the switches in the RB450G and I have not missed a ping since that time using netwatch.

This may help other access issues as well?
Thanks for the TIP, I'll do that... but that should be fixed by MTIK, I guess... isn't it?

JB
by boardman
Tue Sep 28, 2010 2:16 am
Forum: SwOS
Topic: SwOS version 1.2 released!
Replies: 41
Views: 18532

Re: SwOS version 1.2 released!

We can confirm Dude still loosing SMNP connection to RB250GS devices continously. We can confirm loosing ability to ping TO devices at random times, the devices still reachable via http, only pings stop responding, and after a few minutes they start responding again, bridged plain network, not a NA...
by boardman
Mon Sep 27, 2010 10:19 pm
Forum: SwOS
Topic: Dumb question?
Replies: 4
Views: 2763

Dumb question?

Hi guys, probably a dumb question;

What settings to put @ Broadcast Storm Control - Storm Rate

1k? 2k? 16k? 32k? 512k? 1m? f/s ? How's this value calculated or estimated?

Include or not include unicast?

Sorry if this is too dumb, but I just don't know it and want to learn it.

J. Boardman
by boardman
Mon Sep 27, 2010 10:12 pm
Forum: SwOS
Topic: SwOS version 1.2 released!
Replies: 41
Views: 18532

Re: SwOS version 1.2 released!

We can confirm Dude still loosing SMNP connection to RB250GS devices continously. We can confirm loosing ability to ping TO devices at random times, the devices still reachable via http, only pings stop responding, and after a few minutes they start responding again, bridged plain network, not a NAT...
by boardman
Fri Jan 08, 2010 4:38 am
Forum: General
Topic: RouterOS 4.4 released
Replies: 40
Views: 8117

Re: RouterOS 4.4 released

Upgraded 10 radios RB133 w/o issues, number 11 wireless connection erratic, it registers to the AP for a second or two then disconnects, downgrade to 3.28 working fine, upgrade it again to be sure same results, why? No idea, same RB133, same Wireless card as all previous 10 but this one not working....
by boardman
Mon Jul 13, 2009 6:48 pm
Forum: General
Topic: Proxylizer reports not being generated
Replies: 3
Views: 1763

Re: Proxylizer reports not being generated

Yeah I guess that's it, it just started working OK after the next day it was installed... weird. Thanks.


JB
by boardman
Sun Jul 12, 2009 7:30 pm
Forum: General
Topic: Proxylizer reports not being generated
Replies: 3
Views: 1763

Proxylizer reports not being generated

Hi, I finally made Proxylizer work, but still having a small issue, USER STATISTICS reports are working flawless, but DOMAIN STATISTICS reports are not. History : 0 and [GO BACK] Report not generated yet, click "Check Status" after few moments. Report will strart to generate at 2009-07-11 18:01:00 [...
by boardman
Sat Jul 11, 2009 7:19 pm
Forum: General
Topic: syslog-ng not working on Ubuntu OS Proxylizer Installation
Replies: 7
Views: 2025

Re: syslog-ng not working on Ubuntu OS Proxylizer Installation

Exactly same situation here, anybody with an idea?

Thanks

JB
by boardman
Sat Jul 11, 2009 7:18 pm
Forum: General
Topic: Proxylizer is not working
Replies: 17
Views: 5749

Re: Proxylizer is not working

Everybody having problems, including me, does anybody has an answer?


Regards

JB
by boardman
Wed Jun 17, 2009 12:57 am
Forum: General
Topic: Core Router Hardware
Replies: 62
Views: 15794

Re: Core Router Hardware

Actually we're largely running HP/Compaq servers because our server admin prefers them over Dell. The last Dell we have running has at one time had a HDD fail and we were able to identify it and replace it without service interruption. It's a pretty old box now (PowerEdge 2950?) I think we bought i...
by boardman
Tue Jun 16, 2009 10:51 pm
Forum: General
Topic: best practice for lightning protection
Replies: 24
Views: 5452

Re: best practice for lightning protection

The tires.... huh? -- The water on the tires is not conductive because is clean !!!! K'mon are the tires sterilized or what? --- Nah I don't think so.... Check this video clip: http://www.youtube.com/watch?v=eX6Xk0DRVvE Check the distance between the airplane and the ground and compare it to the "st...
by boardman
Tue Jun 16, 2009 7:58 am
Forum: General
Topic: best practice for lightning protection
Replies: 24
Views: 5452

Re: best practice for lightning protection

I call that lucky Tim, There are ground paths through your ethernet and power supply. Or are you running fiber on the ethernet and an isolation transformer for the power? Tom 10 years of radio and lightning experience and I have tried it all. I don't think tires will insulate you at all... first, t...
by boardman
Thu May 21, 2009 9:48 pm
Forum: The Dude
Topic: Bug? The Dude 3.2 - Notifications - Email CC field not w....
Replies: 10
Views: 1993

Re: Bug? The Dude 3.2 - Notifications - Email CC field not w....

Was the Email CC issue fixed in version 3.3 or 3.4? I am using 3.4 right now and I still am unable to recieve a email no matter what I put in the CC line.

It is working OK now.


Regards

J. Boardman
by boardman
Wed May 13, 2009 9:41 pm
Forum: Wireless Networking
Topic: A new bug in 3.22?!
Replies: 14
Views: 2192

Re: A new bug in 3.22?!

3.23 did fix it...but it fix the problem by having a 'blank' field of TX :(
It should be blank. It will only show the TX info if on the other end will be RouterOS, as the other end sends this info.
Or Nanostation


Regards

JB
by boardman
Thu Apr 16, 2009 7:49 pm
Forum: The Dude
Topic: Bug? The Dude 3.2 - Notifications - Email CC field not w....
Replies: 10
Views: 1993

Re: Bug? The Dude 3.2 - Notifications - Email CC field not w....

fixed in next version, please hold on

Thanks, waitting ... counting minutes...

Regards from Mexico !!

J. Boardman
by boardman
Wed Apr 15, 2009 8:19 pm
Forum: The Dude
Topic: Bug? The Dude 3.2 - Notifications - Email CC field not w....
Replies: 10
Views: 1993

Re: Bug? The Dude 3.2 - Notifications - Email CC field not w....

Anybody else experiencing this issues? Yes! I just upgraded to 3.2 today, and didn't notice that the CC had disappeared from the email notifications until I read your post. This is really annoying, as now I am the only person receiving alerts on network equipment failures! Welcome to my world .... ...
by boardman
Wed Apr 15, 2009 7:35 pm
Forum: The Dude
Topic: CPU at 150% :)
Replies: 5
Views: 1206

Re: CPU at 150% :)

but it says rb-500 ROS 2.9.50..
Dual core RB532? that's hot! :lol:
LMAO !!!

JB
by boardman
Wed Apr 15, 2009 7:30 pm
Forum: The Dude
Topic: Bug? The Dude 3.2 - Notifications - Email CC field not w....
Replies: 10
Views: 1993

Re: Bug? The Dude 3.2 - Notifications - Email CC field not w....

Anybody else experiencing this issues?


Regards

JB
by boardman
Thu Apr 09, 2009 8:37 pm
Forum: The Dude
Topic: Bug? The Dude 3.2 - Notifications - Email CC field not w....
Replies: 10
Views: 1993

Bug? The Dude 3.2 - Notifications - Email CC field not w....

Upgraded from 3.1 to 3.2, all CC fields at notifications are gone; Now I am trying to manually add a CC email address but at the time of click on Apply or OK the field goes blank again, ... is it just me or someone else is experiencing this? Tested on two different The Dude production servers. Regar...
by boardman
Thu Feb 26, 2009 1:07 am
Forum: The User Manager
Topic: email after user sign-up
Replies: 8
Views: 4303

Re: email after user sign-up

Any new on this topic?

Thanks

J. Boardman
by boardman
Thu Feb 26, 2009 1:02 am
Forum: The Dude
Topic: Dude SMTP Error - Invaid Body
Replies: 1
Views: 1893

Re: Dude SMTP Error - Invaid Body

I am having exactly the same issue, any ideas?

Thanks

Jorge Boardman
by boardman
Wed Jan 28, 2009 9:06 pm
Forum: General
Topic: BGP Prefixes Problem
Replies: 18
Views: 3526

Re: BGP Prefixes Problem

.
by boardman
Sat Sep 13, 2008 2:30 am
Forum: The Dude
Topic: The Dude 3 RC2
Replies: 35
Views: 8857

Re: The Dude 3 RC2

Mmmh ... I guess web server still not working at least not for me.... it worked for about half an hour after that .... Error 504: failed to connect to server (xxx.xxx.xxx.xxx): Connection timed out This is for RC3 If a new log is created "Syslog" , port 514 enabled on Syslog settings, syslog rules ...
by boardman
Sat Sep 13, 2008 2:10 am
Forum: The Dude
Topic: The Dude 3 RC2
Replies: 35
Views: 8857

Re: The Dude 3 RC2

Mmmh ... I guess web server still not working at least not for me.... it worked for about half an hour after that .... Error 504: failed to connect to server (xxx.xxx.xxx.xxx): Connection timed out
by boardman
Mon Aug 25, 2008 3:44 am
Forum: RouterBOARD hardware
Topic: Help! 433 I did something really stupid!
Replies: 8
Views: 2507

Re: Help! 433 I did something really stupid!

Don't forget about CTRL-X (Safe Mode feature) for next time, if you screw things up, just power-cycle your Mikrotik and it will be just as it was before you started to mess with it. =)


Best Regards


Jorge Boardman
by boardman
Mon Aug 25, 2008 3:20 am
Forum: General
Topic: Ros v3.x : WInbox question
Replies: 5
Views: 2015

Re: Ros v3.x : WInbox question

That's good to know, Does anybody knows how to keep those settings when "in" The Dude /Tool/Winbox is used?


Best Regards

Jorge Boardman
by boardman
Sun Jun 29, 2008 6:22 pm
Forum: General
Topic: Two BUGS *** I Believe *** in configuration exporting engine
Replies: 9
Views: 1630

Re: Two BUGS *** I Believe *** in configuration exporting engine

He made a valid point... What's new in 3.10: *) added Multilink PPP to PPPoE client - just specify multiple interfaces to enable it; *) added ability to add dynamicly PPTP, L2TP & PPPoE client addresses to firewall address-list, specified in ppp profile, or via RADIUS in Mikrotik:19; *) added addre...
by boardman
Sat Jun 28, 2008 8:10 pm
Forum: General
Topic: Two BUGS *** I Believe *** in configuration exporting engine
Replies: 9
Views: 1630

Re: Two BUGS *** I Believe *** in configuration exporting engine

The only bugs I find are on my dog.... maybe I'm just too stupid... I just do a backup off the old stuff and restore on the new stuff (ie: RB600 from RB500) and haven't had ONE issue... Like I said - maybe a little dim.... but thing I can tell you is I DO NOT go LOOKING for the tinyest weeenyest li...
by boardman
Mon Jun 23, 2008 9:08 pm
Forum: Wireless Networking
Topic: NStream 2, Redundancy?
Replies: 9
Views: 3348

Re: NStream 2, Redundancy?

What happened with the results of these thread....


Best

Jorge Boardman
by boardman
Thu Jun 12, 2008 4:34 am
Forum: General
Topic: Radius Manager Pro 3.3.0
Replies: 8
Views: 1953

Re: Radius Manager Pro 3.3.0

kool
by boardman
Wed Jun 11, 2008 10:43 pm
Forum: General
Topic: Radius Manager Pro 3.3.0
Replies: 8
Views: 1953

Re: Radius Manager Pro 3.3.0

Not sure... probably running several instances of Radius Manager each one with different databases ... don't know ask Viktor at RM support.
by boardman
Wed May 21, 2008 8:37 pm
Forum: General
Topic: Two BUGS *** I Believe *** in configuration exporting engine
Replies: 9
Views: 1630

Re: Two BUGS *** I Believe *** in configuration exporting engine

Jorge, Do you have any idea how many "bug" topics you have started? Starting to wonder about user error, seriously! Yes, three (including this one) for RouterOS and one for The Dude... From those, one for RouterOS turned to be actually a bug (bios), and the one for The dude was and still a bug. I r...
by boardman
Wed May 21, 2008 2:07 am
Forum: General
Topic: Two BUGS *** I Believe *** in configuration exporting engine
Replies: 9
Views: 1630

Two BUGS *** I Believe *** in configuration exporting engine

I Believe there is a bug in version 3.x (tested in v 3.9), while exporting configuration in queues simple if there are any queues with unlimited settings in Burst Limit or Burst threshold or 0 in seconds this is what's gets exported: add burst-limit=/1536000 burst-threshold=/256000 burst-time=/32s c...
by boardman
Sat May 03, 2008 2:28 am
Forum: General
Topic: BUG - I guess in v3.7
Replies: 3
Views: 965

Re: BUG - I guess in v3.7

Jorge, it is because there should not be passthrough for mark-connecction rule. I did not understand what you mean... If I am marking different connections then marking packets packets or routing, I need to set passthrough = yes or am I wrong? Example: add action=mark-connection chain=prerouting co...
by boardman
Wed Apr 30, 2008 9:21 pm
Forum: General
Topic: Radius Manager Pro 3.3.0
Replies: 8
Views: 1953

Re: Radius Manager Pro 3.3.0

no problem, see ya.
by boardman
Wed Apr 30, 2008 8:59 pm
Forum: General
Topic: BUG **** RB150 + V3.7 Firmware Upgrade
Replies: 3
Views: 1108

Re: BUG **** RB150 + V3.7 Firmware Upgrade

From now on, it is going to be SCARY to upgrade firmware on remote equipment... 50Km away from here and 300' up in the tower.... can't believe this kind of things happening .... Hard to explain to the boss he need to pay truck ride to remote location and probably tower climbing expenses.... just can...
by boardman
Wed Apr 30, 2008 8:54 pm
Forum: General
Topic: better pcq or pfifo?
Replies: 7
Views: 2485

Re: better pcq or pfifo?

The way the queues handle the packets its different, pcq or pfifo, please read the manual it is explained there, and according to that different handling of packets you will choose which kind of queue type to use.

Best

Jorge Boardman
by boardman
Wed Apr 30, 2008 8:50 pm
Forum: General
Topic: Radius Manager Pro 3.3.0
Replies: 8
Views: 1953

Re: Radius Manager Pro 3.3.0

We use it and it does work well with mikrotik.
by boardman
Wed Apr 30, 2008 8:49 pm
Forum: General
Topic: BUG **** RB150 + V3.7 Firmware Upgrade
Replies: 3
Views: 1108

Re: BUG **** RB150 + V3.7 Firmware Upgrade

I believe I found a bug in V3.7 for RB150
http://forum.mikrotik.com/viewtopic.php?f=2&t=23184
(RB150 failure after BIOS Upgrade on 3.7)

Thanks...

Jorge
by boardman
Tue Apr 29, 2008 6:45 pm
Forum: General
Topic: BUG **** RB150 + V3.7 Firmware Upgrade
Replies: 3
Views: 1108

BUG **** RB150 + V3.7 Firmware Upgrade

Hi there, I believe I found a bug in V3.7 for RB150 I Upgraded one RB150 from v3.6 to v3.7 all went fine until I upgraded firmware from 2.12 to 2.13, after initial reboot, the Routerboard 150 became unaccessible, it didn't boot anymore, I tried power cycle it several times without success, (the yell...
by boardman
Sat Apr 26, 2008 7:57 pm
Forum: General
Topic: BUG - I guess in v3.7
Replies: 3
Views: 965

BUG - I guess in v3.7

Hi there,

MTik guys, in firewall Mangle Detailed mode: Passthrough is not showed for mark connection and for mark routing, only for mark packet rules.

Best


Jorge Boardman
by boardman
Wed Apr 23, 2008 11:34 pm
Forum: General
Topic: Help with public subnet
Replies: 21
Views: 2355

Re: Help with public subnet

good news,, and how can i accomplish that??? thank you very much Very easy.... a little reading, a little typing and you should be done: http://wiki.mikrotik.com/wiki/TransparentTrafficShaper Best Jorge Boardman *** Very easy.... a little reading, a little typing and you should be done: http://wiki...
by boardman
Wed Apr 23, 2008 11:19 pm
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1662

Re: PPPoE Server + Layer 7 CRASH!!!

found it :

/system hardware
set multi-cpu=no


It was = no
by boardman
Wed Apr 23, 2008 11:13 pm
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1662

Re: PPPoE Server + Layer 7 CRASH!!!

Where do you setup multicpu option = no?
by boardman
Wed Apr 23, 2008 8:37 pm
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1662

Re: PPPoE Server + Layer 7 CRASH!!!

Almost same situation here except my CPU does go all the way UP to 100%, It keeps that way and the router starts to loose connectivity; not responding to pings, webmin can't connect or if it gets connected it only last for a few seconds, and suddenly the system reboots by itself (probably due to wat...
by boardman
Wed Apr 23, 2008 1:54 am
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1662

Re: PPPoE Server + Layer 7 CRASH!!!

v3.8? where did you get it? :)
Sorry, typo = 3.7
by boardman
Tue Apr 22, 2008 10:18 pm
Forum: General
Topic: Help with public subnet
Replies: 21
Views: 2355

Re: Help with public subnet

good news,, and how can i accomplish that??? thank you very much
Very easy.... a little reading, a little typing and you should be done: http://wiki.mikrotik.com/wiki/TransparentTrafficShaper


Best

Jorge Boardman
by boardman
Tue Apr 22, 2008 9:43 pm
Forum: General
Topic: Layer 7
Replies: 10
Views: 6491

Re: Layer 7

Yes, but Normis says:

p2p can be filtered just like that, without using l7. example:

Code:
/ip firewall filter add chain=forward p2p=all-p2p action=drop


l7 is for other advanced applications.
by boardman
Tue Apr 22, 2008 9:33 pm
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1662

Re: PPPoE Server + Layer 7 CRASH!!!

Happening the same here.... V. 3.8...

Any ideas?
by boardman
Fri Jan 18, 2008 4:53 am
Forum: General
Topic: Layer 7
Replies: 10
Views: 6491

Re: Layer 7

Anybody having an explanation for this?

Best

Jorge Boardman
by boardman
Wed Jan 16, 2008 12:05 am
Forum: General
Topic: Layer 7
Replies: 10
Views: 6491

Re: Layer 7

Anybody?
by boardman
Tue Jan 15, 2008 7:17 pm
Forum: General
Topic: Layer 7
Replies: 10
Views: 6491

Re: Layer 7 - Layer 3 - RouterOS 3.0RC14 Something wrong

p2p can be filtered just like that, without using l7. example: /ip firewall filter add chain=forward p2p=all-p2p action=drop l7 is for other advanced applications. In a new-fresh installed RouterOS 3.0RC14 just doing NAT, nothing else configured in it except the obvious IP's for interfaces public a...
by boardman
Sun Jan 13, 2008 6:49 pm
Forum: General
Topic: Performance Question: PPPoE or Hotspot for Wireless Clients
Replies: 7
Views: 2646

Re: Performance Question: PPPoE or Hotspot for Wireless Clients

Hi, I'm running a WISP with wireless (802.11b) distribution based on bridged rb532 boards (4 with client dist and backbone conn, 2 with only distribution and 2 for only backbone) about and a concrete and not-very-well-supported-and-stable software for clients AAA, bandwidth throtling and so on. Now...
by boardman
Sun Jan 13, 2008 12:09 am
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 4410

Re: RouterOS RC13 stop working

tried without Layer 7 Rafael Lore How I can disable Layer 7? If you have firewall rules that are using the L7 matcher, disable these rules to make CPU usage smaller. So, what's the point for him on having Layer-7 capabilities if he HAD to disable or not use them ....? The IBM server he mentioned lo...
by boardman
Sat Nov 03, 2007 9:57 pm
Forum: The Dude
Topic: The Dude not discovering WAPs
Replies: 4
Views: 1697

Re: The Dude not discovering WAPs

I am getting frustrated at the lack of response. I thought the idea of these forums was to help each other out?

Lately this Dude forum has been a little abandoned .... or we all still stuck with the same questions....
by boardman
Sat Nov 03, 2007 9:55 pm
Forum: The Dude
Topic: Motorola Canopy, RSSI and Jitter
Replies: 12
Views: 8446

Re: Motorola Canopy, RSSI and Jitter

yes. I have snmp runnig, and I can get The Dude to show traffic across a link, however I do not know how to extract any other info. Canopy uses SNMP v2. Your assistance would be greatly appreciated. Thanks... Download canopy Mibs, put them into dude then do a SNMP walk and make probes/functions as ...
by boardman
Sat Nov 03, 2007 9:52 pm
Forum: The Dude
Topic: moving devices to submaps
Replies: 1
Views: 1619

Re: moving devices to submaps

You can Copy - Paste using The Dude tool bar commands on server only and this is new on beta version
by boardman
Sat Nov 03, 2007 9:48 pm
Forum: The Dude
Topic: Dude 3.0 beta7 service hangs/stop monitoring
Replies: 33
Views: 8490

Re: Dude 3.0 beta7 service hangs/stop monitoring

Hi anybody else experimenting this issues? Mikrotik guys any recommendation?

This Dude server is running only for that purpose on a Dell Poweredge 350 server, 850Mhz P3 CPU w/512M Ram on windows XP.

Most of unnecessary services turned off, all resources dedicated toi The Dude.

Best Regards
by boardman
Wed Oct 31, 2007 10:16 pm
Forum: The Dude
Topic: Dude 3.0 beta7 service hangs/stop monitoring
Replies: 33
Views: 8490

Re: Dude 3.0 beta7 service hangs/stop monitoring

BUMP !!!

Any comments from developers ?
by boardman
Tue Oct 30, 2007 4:38 am
Forum: The Dude
Topic: Notifications for Excessive Bandwidth Usage using SNMP
Replies: 16
Views: 8523

Re: Notifications for Excessive Bandwidth Usage using SNMP

Hi, i was motivated by this thread to implement bandwidth warnings for our smart switches, I got it to generate an alert if the port used 9Mbps of traffic for a period of 10 minutes. Is this what you were looking to do?
Can you please post how you did it?


Thanks
by boardman
Tue Oct 30, 2007 4:22 am
Forum: The Dude
Topic: Dude 3.0 beta7 service hangs/stop monitoring
Replies: 33
Views: 8490

Dude 3.0 beta7 service hangs/stop monitoring

Hi there, Anybody experimenting Dude 3.0 beta 7 hangs (stops monitoring) after around 20-24 hours working? Maps still "working" I mean you can edit devices, move them around, create links etc. but all the data and services monitoring is dead, stopped, showing exactly the same values forever until SE...
by boardman
Fri Oct 12, 2007 6:28 am
Forum: Wireless Networking
Topic: Bonded NStreme vs. NStreme2
Replies: 15
Views: 3389

Bonded NStreme vs. NStreme2

Dual nstream is more "driver related". I had problem with dual nstreaming SR5 and 684HA cards (SR5,HA from one side, and SR5, HA from the other, I didn't have more cards to use 4 equal cards in both PCs :/). Soo I choose bonding 2 nstreams. Problem with the bonding is that one link can get up to 48...
by boardman
Fri Oct 12, 2007 6:10 am
Forum: The Dude
Topic: When is V3 Beta 7 available
Replies: 17
Views: 4886

Re: When is V3 Beta 7 available

BTW, On large networks (I believe - 27M export backup) Dude 2.2 suddenly starts showing a few devices as unknown, all graphing data for that device get´s lost, right click - settings = nothing happends , all links and submaps below that unknown device get lost. Any ideas on this issue? Should we wai...
by boardman
Fri Aug 24, 2007 1:50 am
Forum: Wireless Networking
Topic: High and unstable ping and disconnections at 5Ghz
Replies: 13
Views: 2896

Re: High and unstable ping and disconnections at 5Ghz

I just wanted to thank for your precious replies, my link is now pinging 6ms to 12ms, with just some very rare 17ms peaks :)

Bandwidth was/is also a problem, but I'm working on it as well :D

No problem, glad you figure it out....


Jorge
by boardman
Wed Aug 22, 2007 7:10 pm
Forum: Wireless Networking
Topic: Bonding or dual nstreme asking for suggestions/recommendatio
Replies: 5
Views: 1357

Re: Bonding or dual nstreme asking for suggestions/recommendatio

i suggest 1 option
we done that....with 5 miles, we use 2 cm9,2 mini pci to PCI, 2 antennas grid 27 dbi, and 1,8 Ghs mobo.
and it's work verrrryyyyyyy good, till now its 1st year.
bw.....no problem, rate transfer ..the best we have till now.
Thks for your reply ... anybody else...
by boardman
Tue Aug 21, 2007 6:40 pm
Forum: Wireless Networking
Topic: 25Km 125Mbps FDX Link
Replies: 24
Views: 10942

Re: 25Km 125Mbps FDX Link

<Blush>Thank you George that's very kind</Blush> You CAN do this in MT with high performance x86 hardware, and we build boxes that can do that all-in-one with up to 5 radio cards in a system. Each card can do 72-80Mbps throughput, and you can bond them together in various ways to give you the aggre...
by boardman
Tue Aug 21, 2007 6:09 pm
Forum: Wireless Networking
Topic: anybody with wireless bonded links ?
Replies: 5
Views: 1344

Re: anybody with wireless bonded links ?

In few weeks will try a new setup. Two RBs (A & B) connected by lan to a single RB (C). A & B Have wireless-lan bridges, C only lan. C will do lan bonding for A & B. Same setup on remote side. It is more likely that Wireless cards fail than lan ports on RBs. So, this way, if a wlan card fails, and ...
by boardman
Tue Aug 21, 2007 6:05 pm
Forum: Wireless Networking
Topic: Bonding or dual nstreme asking for suggestions/recommendatio
Replies: 5
Views: 1357

Bonding or dual nstreme asking for suggestions/recommendatio

Hi there We have the necessity of upgrade one of our links, that link carry our main internet feed, this link is about 3 miles long, this is due we are currently topping up it available bandwidth. This links consists of two RB532's w/SR5's an 27 dBi hyperlink's grids, usually connected @54Mbps, the ...
by boardman
Sun Aug 19, 2007 7:42 pm
Forum: Wireless Networking
Topic: High and unstable ping and disconnections at 5Ghz
Replies: 13
Views: 2896

Re: High and unstable ping and disconnections at 5Ghz

- If you are planning to use two antennas one for TX and one for RX, then you will have to use Dual-Nstreme, but for dual-nstreme you will need a bigger CPU, I have read some post of people being able to use RB532's to achieve daul-nstreme but according to the manual and to my own personal experien...
by boardman
Sun Aug 19, 2007 6:22 pm
Forum: Wireless Networking
Topic: High and unstable ping and disconnections at 5Ghz
Replies: 13
Views: 2896

Re: High and unstable ping and disconnections at 5Ghz

Hi, I believe you are pointing your energies to the wrong direction, - If you are planning to use two antennas one for TX and one for RX, then you will have to use Dual-Nstreme, but for dual-nstreme you will need a bigger CPU, I have read some post of people being able to use RB532's to achieve daul...
by boardman
Tue Aug 14, 2007 4:43 am
Forum: Wireless Networking
Topic: High and unstable ping and disconnections at 5Ghz
Replies: 13
Views: 2896

Re: High and unstable ping and disconnections at 5Ghz

Almost forgot: do you need any more information? Have you already "unpluged" your customers from the network and did some btest tests through your link do you have the same performance issues? If yes you have interference problems. Switch frequencies. If not some of your customers are "killing" you...
by boardman
Tue Aug 14, 2007 4:36 am
Forum: Wireless Networking
Topic: 1.5km link 108mbps
Replies: 8
Views: 1745

Re: 1.5km link 108mbps

nstreme-dual, 2x core2duo, 4x wmia123ag = 70-80mbps both way, 5gturbo
if add one more card each side we can get over 100-110mbps
Hi there, how are you "bonding" and powering those wmia123ag's ?

Best

Jorge
by boardman
Tue Aug 14, 2007 4:30 am
Forum: Wireless Networking
Topic: Dual polarity antenna with Nstream2?
Replies: 5
Views: 1407

Re: Dual polarity antenna with Nstream2?

K'mon 20+ Mbps full duplex !!!!! on RB133's !!!! You got to be kidding us. That is impossible as far as I know, read and according to the test I have already made... even RB532A w/400Mhz will be on its knees with that amount of data passing through it. Please explain.... How are your CPU's at that s...
by boardman
Tue Aug 14, 2007 4:17 am
Forum: Wireless Networking
Topic: v2.9.45 5ghz band with country setting
Replies: 50
Views: 22470

Re: v2.9.45 5ghz band with country setting

So for anyone wanting to use those extra frequencies the only way is to buy and install MikroTik RouterOS Custom Frequency License, am I right?

Best

Jorge Boardman
by boardman
Tue Aug 14, 2007 4:14 am
Forum: General
Topic: 5GHz-turbo
Replies: 16
Views: 10025

Re: 5GHz-turbo

So in order for people that want to use those extra frequencies the only way to is to buy and install the MikroTik RouterOS Custom Frequency License am I right?

Best

Jorge Boardman
by boardman
Sat Jul 21, 2007 3:54 am
Forum: Wireless Networking
Topic: 240Km link with RB532 @ 20Mbits
Replies: 62
Views: 42257

Re: 240Km link with RB532 @ 20Mbits

is it 2.4 or 5GHz?

poster has "p2p link 5ghz" then "sr2 for 2.4ghz" and "i send 5ghz result"

then there's a config with "frequency=5220"

:?
Check the config of the MASTER side, "frequency=5220 band=5ghz" the slave radio self-adjust to MASTER frequency.

Best

Jorge Boardman
by boardman
Fri Jul 20, 2007 2:12 am
Forum: Wireless Networking
Topic: 240Km link with RB532 @ 20Mbits
Replies: 62
Views: 42257

Re: 240Km link with RB532 @ 20Mbits

Could you pls export the script of Links and share with us. MASTER: / interface ethernet set ether1 name="ether1" mtu=1500 mac-address=00:0C:42:0A:6B:91 arp=enabled disable-running-check=yes auto-negotiation=yes \ full-duplex=yes cable-settings=default mdix-enable=yes speed=10Mbps comment="" disabl...
by boardman
Tue Jul 10, 2007 3:54 am
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

If you need any help - feel free to ask... I've gotten fairly proficient in RMW over the past year of using it, and it's almost always helped me improving the quality of my links... Pre-prepared antenna pattern files and free topographical data can be a bit of a schlep to find on the web, but there...
by boardman
Tue Jul 10, 2007 3:48 am
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

It seems he would get more benefit crowding in the top of the left tower with a smaller dish.
Hi, thks for your comment but please explain why.

Best

Jorge Boardman
by boardman
Mon Jul 02, 2007 10:42 am
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

I'll go through Radio Mobile learning curve.... thks for the advice's.

Jorge
by boardman
Sun Jul 01, 2007 8:21 am
Forum: Wireless Networking
Topic: misteriously happends randomply... SOLVED!
Replies: 5
Views: 1166

Re: misteriously happends randomply... SOLVED!

What was the actual problem? problem solved with bigger dishes, sr5 replaced with xr5 and nstreme removed from link. thank you for interest. regards, C. G. Any idea why nstreme was causing that behaviour? Did you tested the setup with the bigger dishes, XR5´s but WITH nstreme enabled? - We are expe...
by boardman
Sun Jul 01, 2007 8:13 am
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

After a few hours, a lot of patience with a guy on each tower, struggling with the aiming of the 4ft. dishes, the link was a success, 54Kms, linked at 24-36Megs, with a TCP throughput of around 15M-16M UP and DN. -78dBm Signal Strength, 21-22 SNR, 70-71 CCQ. -78dBm seems rather low for 50 k and 4ft...
by boardman
Sat Jun 30, 2007 7:41 pm
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

Well thanks a lot, that info may become handy for sure...

Best

Jorge Boardman
by boardman
Wed Jun 20, 2007 3:32 am
Forum: General
Topic: Spammer can not catch it.
Replies: 1
Views: 786

Spammer can not catch it.

Hi, I have our e-mails servers hosted in Dallas Tx USA, we have customers with public IP,s and customers nated behind our mikrotik router. My NATED public IP (routeros WAN IP) has been blocked recently a few times due spamming the hosting smtp server, I believe it is one of our nated customers causi...
by boardman
Wed Jun 20, 2007 3:23 am
Forum: General
Topic: A good syslog server
Replies: 0
Views: 594

A good syslog server

Hi guys, I have been using for a few days SolarWinds syslog Monitor in order to "catch" the log file of my mikrotiks, but I have noticed the info displayed on the syslog software is not complete, for example let`s say mi router logs: " MAIL: forward: in:LAN out:WAN , src-mac xx:xx:xx:xx:xx:xx proto ...
by boardman
Fri Jun 15, 2007 2:11 am
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

Well, Here appears to be a success story; After a few hours, a lot of patience with a guy on each tower, struggling with the aiming of the 4ft. dishes, the link was a success, 54Kms, linked at 24-36Megs, with a TCP throughput of around 15M-16M UP and DN. -78dBm Signal Strength, 21-22 SNR, 70-71 CCQ....
by boardman
Fri Jun 15, 2007 2:08 am
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

Thks for sharing Frank. That´s the way we have been trying but no luck, we just installed those last week, we will try again this week with one guy on each tower; we were usng googleearth , gps , compass to pre-align dish on point A and we were only moving dish on point B but I guess point A was no...
by boardman
Mon Jun 11, 2007 6:01 am
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

Thks for the tips guys, I really appreciate it.

Best

Jorge
by boardman
Mon Jun 11, 2007 12:33 am
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

I have found the best way to align antennas on a long link is to use a compass. You have the GPS co-ordinates, so can work out the azimuth. An inclinometer will give you the correct downtilt. We have a high 'first hit' success rate on 40-50km links using these tools, and once the signal has been sp...
by boardman
Mon Jun 11, 2007 12:29 am
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

Have you tried the link at a short distance to make sure they link in that scenario? We tried it only on bench test. But I just found out something; On the Motorola PtP Link Estimator there is a table to add ground elevations and obstructions on a per distance basis, so I used google earth to take ...
by boardman
Sun Jun 10, 2007 9:56 pm
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

Antenna A is only 100' in the middle of what looks like a city. Do you have line of sight out of the city with no obstructions? Yes, no obstruction. The Site A is almost at the border of the city with short building in the area, and on the path direction practically next door there is an airport, a...
by boardman
Sun Jun 10, 2007 9:52 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 3673

Re: Stupid Link!!!

Hi I polorised the antennas to HP and have enabled nstream.Does it cost anything when i do th upgrade on OS?Is 12 megs tcp the best i can get Or is the PC based router board going to be a better option not interested in going dual nstream so please advise on best way forward. What is best way to up...
by boardman
Sun Jun 10, 2007 8:24 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 3673

Re: Stupid Link!!!

Hi I have the same distance link and have about -77, i got: Atheros AR5413 mini pci card, 5ghz 31db grids, lmr400 3 meter cable, 532 router boards and version 2.9.30 . i am also only getting 12 megs.i do have line of sight. Please explain what settings i have to change from default to ? to receive ...
by boardman
Sun Jun 10, 2007 8:15 pm
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Re: Aligning tips - share -

Expand on what hardware you are using. Radios, antennas, tower heights both AGL and AMSL on both sides and frequencies. Also GPS coordinates if you have them. A 52km link is something that takes some preplanning and I'm not sure your issue isn't LOS, fresnel, etc. Ok thks for the reply, here's the ...
by boardman
Sun Jun 10, 2007 5:28 pm
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

Thks for sharing Frank. That´s the way we have been trying but no luck, we just installed those last week, we will try again this week with one guy on each tower; we were usng googleearth , gps , compass to pre-align dish on point A and we were only moving dish on point B but I guess point A was not...
by boardman
Sun Jun 10, 2007 6:25 am
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3778

Aligning tips - share -

Hi, Can you share aligning tips for a 52Kms PtP link ... Pointing the dishes ... ideas how to start how to "find" the narrow beam on such a long link. Settings on the routerOS start in aligning mode or just move the dishes over and over and wait until the radios get registered to fine tune them? Ple...
by boardman
Sun Jun 10, 2007 6:01 am
Forum: Wireless Networking
Topic: Mikrotik VS Trango battle.
Replies: 28
Views: 7896

Re:

We started service in 2004 without supporting of local authorities. Now, with more than 200 customers, the municipal goverment (only for electoral intentions) has supported a big company to make a wireless network in our city. The company use 2.4 Canopy stuff, so we have a lot of troubles now. The ...
by boardman
Sun Jun 10, 2007 5:27 am
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3484

Re: about 50Km link p2p

Please keep us posted about how this link went, we are currently deploying a 52Km one, having a hard time aligning those 4ft dishes...

Any ideas, technics, method to align those narrow beam big buckets...


Best

Jorge
by boardman
Sun Jun 10, 2007 4:16 am
Forum: Wireless Networking
Topic: 240Km link with RB532 @ 20Mbits
Replies: 62
Views: 42257

Re: 240Km link with RB532 @ 20Mbits

if i have radio with 200mw output and hyperlink 24 db grid antena in a both side how far i can link this stuff....thnks before......and wow salute for 240 km sucess link

http://www.electro-comm.com/rfcalculations.html
by boardman
Mon May 14, 2007 9:59 pm
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

Are we still in LIMBO regarding this?

Best

Jorge
by boardman
Mon Apr 23, 2007 5:13 pm
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

yeah it seems that they haven't found it yet, anyway no answer from mikrotik support... I found that this problem appears only when i add devices manually, unfortunately what i wanted to do... So now to pass through this bug i use the "discover" button and scan only the IP @ of the device that i wa...
by boardman
Mon Apr 16, 2007 6:49 pm
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

Yeap, but seems mikrotik guys has not found the solution for this... yet.
by boardman
Sat Mar 31, 2007 9:07 pm
Forum: Wireless Networking
Topic: RB112 + SR2 + 15db omni +48v POE .4a = bad pinging
Replies: 33
Views: 5568

[quote="taloot"]the antenna is about 23 meter than the ground the area is totally flat i can connect to the ap directly from the laptop for 9km away from the ap (which is very strong)] Please read and understand the radiation pattern of your omi.- Omnis does not radiate in an "sphere" like pattern t...
by boardman
Fri Mar 30, 2007 9:03 pm
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

Are we still stuck on this?

Best

Jorge
by boardman
Fri Mar 30, 2007 9:02 pm
Forum: Wireless Networking
Topic: RB112 + SR2 + 15db omni +48v POE .4a = bad pinging
Replies: 33
Views: 5568

You mentioned earlier or at least that is what I understood a remote WDS link was working OK but not on your laptop ...... - How close to the antenna is the laptop? - Whats the elevation AGL where the omni is located? I am trying to see if you are under the blind area of the radiation pattern of the...
by boardman
Wed Mar 21, 2007 4:41 am
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

Is there a way to send a "bug" report or file to suuport@mikrotik.com ?

Best

Jorge
by boardman
Fri Mar 16, 2007 8:12 pm
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

Anybody? Is this a bug?

Any ideas how to avoid this... ?
by boardman
Tue Mar 13, 2007 6:27 am
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

The bug ghost appeared again - this time it appeared in a different sequence of steps but the error is the same, these were more or less the steps I did before the bug appeared: 1- Create device (Right click on map, click on add device) 2- Fill address and select RouterOS check mark 3- Discover serv...
by boardman
Tue Mar 06, 2007 2:38 am
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

could you please describe precisely how to reproduce the problem, what to do,
when and where to click, step by step?
Very easy, just create some probe via SNMP, add it to an EXISTING device with at least ping probe already on it.

Best

Jorge
by boardman
Thu Feb 22, 2007 9:47 pm
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

I believe it is a bug ... it is easy to repeat .... and it always behave the same way .... any ideas guys?

Best


Jorge
by boardman
Thu Feb 22, 2007 12:27 am
Forum: The Dude
Topic: Bug or only wrong setting? - Dude crash
Replies: 36
Views: 12476

Hi, Did someone got an answer for this one? For me the Dude do not actually crashes, it only took forever to open the "General" screen and if I let it ride for a while till it opens the screen, I can see there are 4.3G services in an unknown state on the apple pie chart of the general tab. In servic...
by boardman
Sat Oct 28, 2006 1:16 am
Forum: General
Topic: Somethig interesting for all of us P2P trafic
Replies: 18
Views: 3558

routeros can `drop` any kind of torrent traffic. encrypted traffic cannot be slowed down with queues, but it can be effectively dropped with firewall. Can RouterOS drop P2P for certain periods of time like during business hours then allow for nights then back drop during next day? Or does it works ...
by boardman
Fri Oct 27, 2006 2:52 am
Forum: General
Topic: Somethig interesting for all of us P2P trafic
Replies: 18
Views: 3558

Somethig interesting for all of us P2P trafic

Hi,

I received this from the spanish Mikrotik phorum and consider ti to be of interest to everybody, so I decided to post it here:

http://www.tippingpoint.com/pdf/resourc ... raffic.pdf

Best Regards

Jorge Boardman
by boardman
Fri Oct 06, 2006 3:28 am
Forum: The Dude
Topic: Request add link, mouse right click over map
Replies: 0
Views: 1297

Request add link, mouse right click over map

Be able to add a link from MAP right click on the mouse...
by boardman
Fri Oct 06, 2006 3:14 am
Forum: The Dude
Topic: 2.0beta10 issues
Replies: 5
Views: 2886

Well I installed it just a few hours and I am glad to tell it is working just perfect, a lot better in performance that version 2.0b9. I am running it in a WinXP pro server poweredge 350 w/256K ECC RAM and a P3 850Mhz engine. Only running dude server, nothing else, winblows optimized; less graphics,...
by boardman
Sun Sep 24, 2006 2:22 am
Forum: The Dude
Topic: Email notification test bug?
Replies: 2
Views: 1705

Same error here, the email TO: is correct user@domain.ext

Any ideas?
by boardman
Sat Aug 05, 2006 4:25 am
Forum: Scripting
Topic: Anybody willing to help me with a script I need
Replies: 3
Views: 1349

Thks a lot men, that´s what I needed...


Jorge
by boardman
Fri Aug 04, 2006 9:01 pm
Forum: Scripting
Topic: Anybody willing to help me with a script I need
Replies: 3
Views: 1349

Anyone?
by boardman
Fri Aug 04, 2006 9:00 pm
Forum: General
Topic: Interesting --- Upsidedown Internet
Replies: 1
Views: 1113

Interesting --- Upsidedown Internet

Guys read this, seems like a fun thing to do:

http://www.ex-parrot.com/%7Epete/upside ... ernet.html

And if someone knows hoe to do it with routeros please let all us now.


Best

Jorge Boardman
by boardman
Fri Aug 04, 2006 1:53 am
Forum: Scripting
Topic: Anybody willing to help me with a script I need
Replies: 3
Views: 1349

Anybody willing to help me with a script I need

Hi I am configuring two routers with VRRP, VRRP appears to be working ok, but since each server will have a PPPoE server running with the same service name, I am guessing that will make trouble. What I want to do is a script under VRRP/scripts to disable PPPoE service on router being VRRP BACKUP, an...
by boardman
Wed Jul 05, 2006 12:06 am
Forum: Wireless Networking
Topic: What am I be doing wrong ? RB532 as AP and 2 RB112 as wds st
Replies: 7
Views: 2055

Hi, I fixed this, the wlan1 on AP was not added as a port on the bridge, I have already tried that one before... no success, this time I reboot de AP so the bridge settings get applied.

Now everything is working as it should be, thks guys...


Jorge Boardman
by boardman
Tue Jul 04, 2006 10:45 pm
Forum: Wireless Networking
Topic: What am I be doing wrong ? RB532 as AP and 2 RB112 as wds st
Replies: 7
Views: 2055

Hi, I fixed this, it was as jarosoup says, the wlan1 on AP was not added as a port on the bridge, but I have already tried that one before , but this time I reboot de AP so the bridge settings get applied.

Now everything is working as it should, thks guys...


Jorge Boardman
by boardman
Tue Jul 04, 2006 9:02 pm
Forum: Wireless Networking
Topic: What am I be doing wrong ? RB532 as AP and 2 RB112 as wds st
Replies: 7
Views: 2055

Hi Sten,

Ethernet interfaces already have disable-running-check=yes , or did I missunderstood what you mean?

Any other idea?


Best

Jorge Boardman
by boardman
Tue Jul 04, 2006 6:34 pm
Forum: Wireless Networking
Topic: What am I be doing wrong ? RB532 as AP and 2 RB112 as wds st
Replies: 7
Views: 2055

Any on these guys?
by boardman
Tue Jul 04, 2006 5:17 am
Forum: Wireless Networking
Topic: What am I be doing wrong ? RB532 as AP and 2 RB112 as wds st
Replies: 7
Views: 2055

What am I be doing wrong ? RB532 as AP and 2 RB112 as wds st

Hi guys, (and girls) :lol: Can anybody please point me in the right direction? This is weird... (My english is not very good, but I'll try to explain myself) This is all going on a benchtest: One RB532 w/CM9, 2.9.26 as an ap-bridge, lets call it AP. Two RB112 w/CM9, 2.9.26 as station-wds, lets call ...
by boardman
Tue Jul 04, 2006 2:00 am
Forum: General
Topic: ZX346Q supported?
Replies: 2
Views: 888

Thks for the answer, I already new that one..., but sometimes some hardware not listed there works ok, because some else driver supports it.

Anyway thks for the answer, I was asking if somebody already tested those....


Best Regards

Jorge
by boardman
Fri Jun 30, 2006 6:45 pm
Forum: General
Topic: ZX346Q supported?
Replies: 2
Views: 888

ZX346Q supported?

Can anybody please tell me if these hardware is supported by routerOS ? http://www.znyx.com/products/hardware/zx340q.htm
Especifically ZX346Q Quad port NIC

Thks

Jorge Boardman
by boardman
Sun Jun 18, 2006 8:41 pm
Forum: General
Topic: PRISM cards...
Replies: 4
Views: 2406

I support this !!! SNR for prism...

Best

Jorge Boardman
by boardman
Wed Jun 14, 2006 1:37 am
Forum: Wireless Networking
Topic: Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9
Replies: 7
Views: 2096

Netgear is atheros on th 5ghz chip I guess, and I'll check on channel 5260, thks.
by boardman
Tue Jun 13, 2006 6:54 pm
Forum: Wireless Networking
Topic: RB112 useless after upgrade to 2.9.25 broken package I guess
Replies: 9
Views: 2238

Well ... it was upgraded using a FTP client....
The Netinstall method was used after the routerOS got screwed up by the damaged .npk file.

Best

Jorge Boardman
by boardman
Mon Jun 12, 2006 8:44 pm
Forum: Wireless Networking
Topic: RB112 useless after upgrade to 2.9.25 broken package I guess
Replies: 9
Views: 2238

Thks sergejs, but I guess you mean the "all packages" file isnt it? And I guess the file that is or was damaged was the one hosted at Mikrotiks USA server; because I downloaded it again and upgrade again the RB112 and had the same result, then I tried to netinstall that same .npk and netinstall cras...
by boardman
Mon Jun 12, 2006 8:25 pm
Forum: Wireless Networking
Topic: Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9
Replies: 7
Views: 2096

All defaults on the mikrotik and defaults on the netgear, If replace the CM9 with a NL-2511 (Prism) it works perfectly.

I´ll post my wireless configuration later...

Best

Jorge Boardman
by boardman
Sun Jun 11, 2006 6:13 pm
Forum: Wireless Networking
Topic: Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9
Replies: 7
Views: 2096

anybody?

mikrotik guys?

I tried with a prism nl-2511mp on the RB and it worked flawless, why the CM9 does not, perhaps something in the driver?

Best

Jorge
by boardman
Sun Jun 11, 2006 6:09 pm
Forum: Wireless Networking
Topic: RB112 useless after upgrade to 2.9.25 broken package I guess
Replies: 9
Views: 2238

Why mikrotik does not ZIP the .npk?

Does anybody has an idea why Mikrotik guys does not ZIP .npk files in order to avoid this "damaged" packages downloads in the future?

Is a lot easier to re-download a damaged ZIP that netinstall again a router, dont you think so?

Best

Jorge
by boardman
Sat Jun 10, 2006 11:36 pm
Forum: Wireless Networking
Topic: RB112 useless after upgrade to 2.9.25 broken package I guess
Replies: 9
Views: 2238

Thks sergejs that did the trick

Thks a lot sergejs, that did the trick.
by boardman
Sat Jun 10, 2006 8:15 pm
Forum: Wireless Networking
Topic: RB112 useless after upgrade to 2.9.25 broken package I guess
Replies: 9
Views: 2238

RB112 useless after upgrade to 2.9.25 broken package I guess

I upgraded one RB112 from 2.9.24 to 2.9.25 and now its not working any suggestions how to fix this mess? I guess the package was broken, now how do I fix it? Here's the terminal output Reboot, yes? [y/N]: system will reboot shortly Rebooting... Stopping services... ERROR: installation of routeros-rb...
by boardman
Sat Jun 10, 2006 6:17 pm
Forum: Wireless Networking
Topic: Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9
Replies: 7
Views: 2096

Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9

Hi, Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9 not talking to each other... I am trying to connect a mikrotik station with a CM9 to a Netgear WAB102 access point, the WAB102 has two radios inside of it, one 5G-802.11a and one 2.4G-802.11b. First I setted up the mikrotik w/CM9 to be a ...
by boardman
Sat Jun 10, 2006 6:16 pm
Forum: General
Topic: Help on wireless issue, Netgear WAB102 and Mikrotik w/CM9
Replies: 0
Views: 554

sorry wrong forum,,, copied to wireless forum
by boardman
Wed Apr 12, 2006 7:20 pm
Forum: General
Topic: Problem with http-downloads via loadbalanced lines
Replies: 51
Views: 13924

I would agree with change ip. I spent ages trying to get that to work like you described using NAT I never succeded! I now use policy routing as next best option. I wish somebody from MT would commect on this issue though as I never got to the bottom of it? Can you post an example of your Policy ro...
by boardman
Sun Mar 19, 2006 6:10 am
Forum: General
Topic: .npk to .zip
Replies: 4
Views: 1492

Thks John, Does the ´all packages´ can be installed on RB500´s ?

Best
by boardman
Sat Mar 18, 2006 7:20 pm
Forum: General
Topic: .npk to .zip
Replies: 4
Views: 1492

.npk to .zip

Hi Mikrotik guys, we have a request: We want to be able to download .npk files contained into a .zip file, because a couple of times .npk's have downloaded damaged and when we upgraded our routers we have had kernel panics, so we needed to reinstall again keeping old configuration. In zip format, ev...
by boardman
Thu Feb 23, 2006 11:46 pm
Forum: Wireless Networking
Topic: Holes in bottom of outdoor box supplied with rb500
Replies: 38
Views: 5828

it's for condensation. if there is no hole, water will start to appear inside the box after temperature changes. even hdd enclosures have small holes for `breathing`
Throw some silica bags inside of the box...

Best
by boardman
Thu Feb 23, 2006 11:13 pm
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 80282

Re: whats is q3 2006

Sorry for bad English, but whats is q3 2006 ?
That means third quarter 2006, third part of the year, july-september.

Bytes....
by boardman
Mon Jan 30, 2006 11:35 pm
Forum: General
Topic: Please hlp needed Strange Routing problem, routes not advert
Replies: 5
Views: 1292

Tested

Hi, I tested this as Christian suggested, (without the wireless link).... results the same....

What am I missing here guys.... please help


Best

Jorge
by boardman
Mon Jan 30, 2006 5:53 pm
Forum: General
Topic: Please hlp needed Strange Routing problem, routes not advert
Replies: 5
Views: 1292

Thks for answering

Hi Christian, Thks for answering...

Let me try this setup without the wireless link and see what happens, thks for the advice.

Best

Jorge
by boardman
Mon Jan 30, 2006 5:15 pm
Forum: General
Topic: Please hlp needed Strange Routing problem, routes not advert
Replies: 5
Views: 1292

Anybody please -....

Anybody .... please ?
by boardman
Sun Jan 29, 2006 8:26 pm
Forum: General
Topic: Please hlp needed Strange Routing problem, routes not advert
Replies: 5
Views: 1292

Please hlp needed Strange Routing problem, routes not advert

Hi, I have the following simple setup, experiencing strange routing issues, dont know if Im doing something wrong or its a bug on MT boxes. Router MT1 Wan IP- Public 216.XXX.XXX.XXX (internet) LAN IP´s ether1: 192.168.127.1/24 , 10.10.0.1/24 , 10.0.0.1/24 - 192.168.127.0/24 Nated users on MT1 - 10.1...
by boardman
Fri Nov 11, 2005 6:13 pm
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

What going on, anybody willing to help?

Please.... I have been waitting for help a long time.....


Jorge
by boardman
Mon Oct 24, 2005 9:16 pm
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

Answers

What exactly is the problem, caching is not working for any user? Or is it working for the non-NAT'd users but not the NAT'd? or vise-versa? No it is not working for any user. Also what interfaces are bridged? - EXT & INT are part of bridge1. - APL-LAN is NAT'd and NOT part of the bridge. - APL-LAN ...
by boardman
Sat Oct 22, 2005 1:16 am
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

any?

anyone?
by boardman
Sat Oct 15, 2005 10:16 pm
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

Any Help?

Any help, please .... ?
by boardman
Fri Oct 14, 2005 11:02 pm
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

anyone?

Hi, any ideas or suggestions on the Cisco-Mikrotik as bridge , transp web-proxy issue?
by boardman
Thu Oct 13, 2005 3:10 am
Forum: General
Topic: [REQ]HELP config Transparant Web-proxy
Replies: 7
Views: 1799

mmmm

Ok, I guess I am starting to understand what you want...... You want to block porno-offensive sites and also display a deny page.... Ok I did that once, but I left it aside because those test were made at the time when mikrotik was version 2.X and I was unable to properly control the bandwidth .... ...
by boardman
Thu Oct 13, 2005 1:16 am
Forum: General
Topic: [REQ]HELP config Transparant Web-proxy
Replies: 7
Views: 1799

try this

your web-proxy conf looks good, but leave the src-address: 202.22.90.44 blank. and If you are using mikrotik version 2.9.x just do the following and it will work: /ip firewall nat add in-interface=ether1 dst-port=80 protocol=tcp action=redirect to-ports=3128 chain=dstnat if you are using 2.8.X do a ...
by boardman
Thu Oct 13, 2005 12:41 am
Forum: General
Topic: [REQ]HELP config Transparant Web-proxy
Replies: 7
Views: 1799

Try this

/ip firewall nat add in-interface=PUBLIC dst-port=80 protocol=tcp action=redirect to-ports=3128 chain=dstnat

assuming your webproxy is up and running in port 3128 with transparent mode enabled, replace the PUBLIC for your actual interface name.

Hope this help.


Best

Jorge
by boardman
Thu Oct 13, 2005 12:34 am
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

I do not know what you mean...

Hi, I do not understand what you mean,,,, please try to explain further.

Paste some of your configuration in order to help u.


Best

Jorge
by boardman
Wed Oct 12, 2005 8:28 pm
Forum: General
Topic: Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque
Replies: 8
Views: 2327

Help needed, Cisco-Mikrotik-Bridged w/web-proxy & masque

Hi, guys. I need your help... how to configure the web-proxy in our mikrotik 2.9.5 box, but this is not a regular scenario or at least it is not behaving like a regular one. We receive our 4 T1's in a cisco router in 4xT1 fashion, this cisco is also the gateway for all of our customers. We have a mi...
by boardman
Wed Oct 12, 2005 7:43 pm
Forum: Wireless Networking
Topic: messenger problem
Replies: 8
Views: 3444

Solution for this.

The final end for this disscusion was: The hotspot did not correctlly (or not at all, i dont remember) created the masquerade srcnat rule in the firewall, that was the problem.

Thks for all the help.
by boardman
Wed Oct 12, 2005 7:39 pm
Forum: General
Topic: Problem with 2.9.5 hotspot and local area shares
Replies: 8
Views: 1792

aja

I really dont know, we did not did that test because all the shares were on a server, and that server did not log into the hotspot.

As soon as you plug the mikrotik w/hotspot enabled into the network, all the problems start appearing.

We downgraded to 2.8 everything started to work flawless.

Thks.