Community discussions

MikroTik App

Search found 385 matches

  • 1
  • 2
by antonsb
Fri Mar 22, 2024 2:54 pm
Forum: Containers
Topic: Did veth <-> disk slowed down in 7.14?
Replies: 5
Views: 605

Re: Did veth <-> disk slowed down in 7.14?

there was one major change that may possible cause this, is it possible to reformat drive using latest versions and recreate everything from scratch?
by antonsb
Thu Mar 21, 2024 10:44 am
Forum: Containers
Topic: Did veth <-> disk slowed down in 7.14?
Replies: 5
Views: 605

Re: Did veth <-> disk slowed down in 7.14?

from which version did you upgrade?
is this arm64 device?
by antonsb
Thu Mar 07, 2024 2:42 pm
Forum: RouterBOARD hardware
Topic: knot GNSS antenna
Replies: 2
Views: 285

Re: knot GNSS antenna

Only active antenna - 3v3
by antonsb
Wed Mar 06, 2024 10:56 am
Forum: Containers
Topic: Homeassistant + Maria DB
Replies: 2
Views: 401

Re: Homeassistant + Maria DB

Im running MariaDB together with PhotoPrism and Caddy for https proxy on RB5009 I installer MariaDB: set up envs: /container envs add key=MARIADB_AUTO_UPGRADE name=mariadb2 value=1 add key=MARIADB_INITDB_SKIP_TZINFO name=mariadb2 value=1 add key=MARIADB_DATABASE name=mariadb2 value=database add key=...
by antonsb
Mon Mar 04, 2024 12:46 pm
Forum: Containers
Topic: Launch container with CPU limit
Replies: 11
Views: 4604

Re: Launch container with CPU limit

we are looking into adding swap and other features, but keep in mind that this is not docker running on RouterOS, not all options can be added that easily.
by antonsb
Tue Feb 20, 2024 11:20 am
Forum: Announcements
Topic: v7.14rc [testing] is released!
Replies: 176
Views: 47273

Re: v7.14rc [testing] is released!

So there definitely _is_ an issue with USB disks on hAP ax^3 in 7.14rc1.
Could you please reach out to me through support system? I cant recreate disk disappear issue. I will also give you modified version with different formatting tools, that will fix other mentioned problems.
by antonsb
Fri Feb 16, 2024 6:40 pm
Forum: Announcements
Topic: v7.14rc [testing] is released!
Replies: 176
Views: 47273

Re: v7.14rc [testing] is released!

v7.14rc1 (firmware v7.14rc1) on hAP ax^3 - USB disk handling is totally broken. Also, when displaying properties, the UUID of the partition changes while looking at it - a phenomenon that should never occur. I double checked the USB disk in my laptop and it's perfectly okay, got another one with th...
by antonsb
Mon Jan 22, 2024 2:58 pm
Forum: RouterBOARD hardware
Topic: RBM33G mPCIe#1 not detecting wireless module
Replies: 2
Views: 1968

Re: RBM33G mPCIe#1 not detecting wireless module

Hi,
could it be that board at some point has received more voltage than rated 11-28 V ? (For example used in automotive, where at car startup it got voltage spike)
Please check if there is stable 3v3 on port, if not U401 may be damaged.
by antonsb
Wed Dec 27, 2023 6:31 pm
Forum: Containers
Topic: Container publish or expose port (-p)
Replies: 2
Views: 1332

Re: Container publish or expose port (-p)

-p flag in docker maps ports in similar way as dst-nat does in MikroTik. Container should not care about -p parameter, as it's done on network layer above it.
by antonsb
Wed Dec 27, 2023 9:52 am
Forum: Containers
Topic: Not installed x86 OS
Replies: 7
Views: 1971

Re: Not installed x86 OS

Could you please give more information about exact V7 version you are using?
Are you using CD image or install image?
by antonsb
Tue Oct 31, 2023 9:52 am
Forum: RouterBOARD hardware
Topic: Burned SMD component
Replies: 7
Views: 2640

Re: Burned SMD component

FB1 CB04YTYH800 Viking Tech Corporation Ferrite Bead 80 Ohm 3A 1204
pic-selected-231031-0952-07.png
by antonsb
Thu Oct 12, 2023 3:56 pm
Forum: Containers
Topic: VETH addresses don't show in Winbox
Replies: 6
Views: 2769

Re: VETH addresses don't show in Winbox

Sometimes veth can be lost automatically.
please explain this in more detail, and if possible provide steps how to repeat this, as i haven't seen such issue.
by antonsb
Thu Oct 05, 2023 12:40 pm
Forum: Containers
Topic: Uptime-Kuma on Chateau
Replies: 4
Views: 2625

Re: Uptime-Kuma on Chateau

Could you please check with different USB drive?
by antonsb
Thu Oct 05, 2023 12:38 pm
Forum: Containers
Topic: VETH addresses don't show in Winbox
Replies: 6
Views: 2769

Re: VETH addresses don't show in Winbox

Should be fixed in upcoming beta versions.
There is still bug that addresses may be lost on interface name change, but this will be fixed in future releases as well.
by antonsb
Tue Sep 26, 2023 5:32 pm
Forum: Containers
Topic: Permissions regression starting with 7.10 and a question about about resource limits
Replies: 1
Views: 2558

Re: Permissions regression starting with 7.10 and a question about about resource limits

All linuxserver images do funky stuff with permission change: https://github.com/linuxserver/docker-baseimage-alpine/blob/master/root/etc/s6-overlay/s6-rc.d/init-adduser/run we are remapping users and setting folder permissions on startup, this would not always work correctly with linxuserver image ...
by antonsb
Thu Sep 21, 2023 12:45 pm
Forum: Containers
Topic: permission denied
Replies: 5
Views: 4194

Re: permission denied

Mounts should work on both containers
by antonsb
Tue Sep 19, 2023 2:29 pm
Forum: Containers
Topic: permission denied
Replies: 5
Views: 4194

Re: permission denied

Hello, if you are using linuxserver image - there are some steps where folder ownership is changed and Syncthing is ran under abc user. if you set PUID and PGID to 0 - everything will run as root, and you should have folder permissions. We will check why setting correct folder ownership fails. step ...
by antonsb
Tue Aug 08, 2023 2:13 pm
Forum: The Dude
Topic: Container with wine+Dude & X11 forwarding?
Replies: 1
Views: 2953

Re: Container with wine+Dude & X11 forwarding?

I have some luck of getting X11 Openbox menus working by using https://github.com/linuxserver/docker-baseimage-kasmvnc so X11 is possible, but there are some permission errors that has to be debugged before other apps could be accessed using this method. I don't get why would anyone use "instal...
by antonsb
Tue Aug 08, 2023 8:05 am
Forum: Announcements
Topic: NEW FEATURE: Back to Home VPN
Replies: 292
Views: 225504

Re: NEW FEATURE: Back to Home VPN

i wish if i can do that with laptop
You can. Configure it as regular wireguard on PC.
by antonsb
Tue Jul 18, 2023 3:19 pm
Forum: Announcements
Topic: v7.11beta [testing] is released!
Replies: 373
Views: 105626

Re: v7.11beta [testing] is released!

Can you please provide some instructions how to add dual-stack IPv4+IPv6 address to a container?
Thanks
dksoft
Done! Look under Tips and Tricks section.
by antonsb
Mon Jul 17, 2023 9:31 am
Forum: Containers
Topic: IPv6 in containers
Replies: 11
Views: 5526

Re: IPv6 in containers

Please, follow the steps below, then restart a container to reproduce error log messages we get.
Thanks, we will look into this.
by antonsb
Fri Jul 14, 2023 2:39 pm
Forum: Containers
Topic: IPv6 in containers
Replies: 11
Views: 5526

Re: IPv6 in containers

does not seem like veth bug to me - this is container that answers, that such entry is already in place.
by antonsb
Fri Jul 14, 2023 12:40 pm
Forum: Containers
Topic: IPv6 in containers
Replies: 11
Views: 5526

Re: IPv6 in containers

next beta will have ipv6 support for veth:
add address=172.17.0.3/16,fd8d:5ad2:24:2::2/64 gateway=172.17.0.1 gateway6=fd8d:5ad2:24:2::1
as well as multiple addresses
by antonsb
Thu Jul 13, 2023 1:14 pm
Forum: RouterBOARD hardware
Topic: M.2 modem for RBM33G
Replies: 1
Views: 2374

Re: M.2 modem for RBM33G

RBM33G m.2 slot has only PCIe connectivity. Most modems are USB peripherals, it will be hard to find supported modem with PCI connectivity with correct m-key, we have some PCI modem support in RouterOS, but it would much easier to use mPCIe or USB slot for modem.
by antonsb
Wed Jul 12, 2023 1:53 pm
Forum: Announcements
Topic: v7.11beta [testing] is released!
Replies: 373
Views: 105626

Re: v7.11beta [testing] is released!

it works as regular wireguard client - PCs can use existing wireguard clients to connect.
by antonsb
Thu Jul 06, 2023 4:11 pm
Forum: RouterBOARD hardware
Topic: GPS in Mikrotik
Replies: 41
Views: 5845

Re: GPS in Mikrotik

GPS data precision can be further improved by using smoothing techniques from raw data - for example Kalman filter:
https://en.wikipedia.org/wiki/Kalman_filter
GPS output You are seeing in RouterOS is just calculated from NMEA output without any filters applied.
by antonsb
Fri Jun 30, 2023 12:57 pm
Forum: RouterOS beta
Topic: Realtek RTL8156 2.5G USB Ethernet for ROS7?
Replies: 13
Views: 8706

Re: Realtek RTL8156 2.5G USB Ethernet for ROS7?

connect adapter to router, generate supout.rif file and send it to support@mikrotik.com with brief explanation. After that we can add it to RouterOS
by antonsb
Fri Jun 30, 2023 12:50 pm
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21730

Re: CubeSA 60Pro ac: 60Ghz clients flapping

@moly

what is AP used in this setup? all devices upgraded to 7.11beta2?
Could you please monitor signal levels for each station as well?
by antonsb
Thu Jun 15, 2023 1:03 pm
Forum: RouterBOARD hardware
Topic: Long term effects of SSD HDD connected to 5009 router?
Replies: 26
Views: 4850

Re: Long term effects of SSD HDD connected to 5009 router?

we have retested 5009 - USB specification will change to 1.5A
by antonsb
Tue Jun 13, 2023 5:16 pm
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21730

Re: CubeSA 60Pro ac: 60Ghz clients flapping

We will have additional fixes for 802.11ay devices in upcoming beta versions.
by antonsb
Fri Jun 09, 2023 12:14 pm
Forum: RouterBOARD hardware
Topic: Long term effects of SSD HDD connected to 5009 router?
Replies: 26
Views: 4850

Re: Long term effects of SSD HDD connected to 5009 router?

mostly container and rose tests - some heavy writes after that no use at all.

p.s. Just checked 5009 - it seems that inner power delivery circuit should support 1.5A, we will recheck if there is a mistake in spec sheet.
by antonsb
Thu Jun 08, 2023 2:47 pm
Forum: RouterBOARD hardware
Topic: Long term effects of SSD HDD connected to 5009 router?
Replies: 26
Views: 4850

Re: Long term effects of SSD HDD connected to 5009 router?

I personally have been using 1.7A rated Micron 5200 SSD via USB to SATA close to year with RB5009 - no issues so far.
by antonsb
Tue Jun 06, 2023 9:14 am
Forum: RouterBOARD hardware
Topic: USB reboot
Replies: 3
Views: 2375

Re: USB reboot

system/routerboard/usb/power-reset duration=5
will reset USB power for 5 seconds.
you can use this in scripts to do power reset at 50GB mark.
by antonsb
Mon Jun 05, 2023 10:38 am
Forum: Containers
Topic: USB Access from Container
Replies: 4
Views: 10058

Re: USB Access from Container

Currently not possible, but this in our to do list.
by antonsb
Wed May 31, 2023 11:50 am
Forum: General
Topic: Wrong bandwidth result by BT
Replies: 2
Views: 291

Re: Wrong bandwidth result by BT

sorry it's bit hard to understand your question, but my guess would be that you are doing btest from router to it's own IP address. In such case traffic is not leaving router.
by antonsb
Tue May 30, 2023 4:29 pm
Forum: Containers
Topic: Launch container with CPU limit
Replies: 11
Views: 4604

Re: Launch container with CPU limit

what would be the use case for such limitation?
by antonsb
Thu May 25, 2023 1:01 pm
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21730

Re: CubeSA 60Pro ac: 60Ghz clients flapping

Could we please get a bit more feedback before we include this fix in upcoming stable version? Thanks!
by antonsb
Thu May 25, 2023 11:52 am
Forum: Containers
Topic: Netflix over Tailscale (ExitNode)
Replies: 4
Views: 4169

Re: Netflix over Tailscale (ExitNode)

path issues should be fixed in latest beta versions
by antonsb
Fri May 12, 2023 8:33 am
Forum: Containers
Topic: Failed to connect to bus: Host is down
Replies: 1
Views: 3265

Re: Failed to connect to bus: Host is down

container is not a virtual machine, do not use it as one.
by antonsb
Wed Apr 19, 2023 12:56 pm
Forum: Containers
Topic: import adguard dns container image problem Topic is solved
Replies: 61
Views: 17130

Re: import adguard dns container image problem Topic is solved

Yes fixes will come with 7.10 branch - otherwise it will slow down existing 7.9 development.
by antonsb
Wed Apr 19, 2023 12:53 pm
Forum: Containers
Topic: RTOS v7.8 hAP ax3 fails to launch a Docker container
Replies: 2
Views: 3148

Re: RTOS v7.8 hAP ax3 fails to launch a Docker container

I tried building with your Dockerfile, but unfortunately build time outs during bundle install for me. quick guess is that some PATH variable may be missing, could you please check if this works with: container/envs/add key="PATH" value="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/b...
by antonsb
Mon Apr 17, 2023 6:09 pm
Forum: Containers
Topic: RB5009 Hello World
Replies: 10
Views: 4649

Re: RB5009 Hello World

Now hello-world should work. Thanks @dynek and @tangent for helping solving this. Fix will be included in upcoming beta version.
by antonsb
Fri Apr 14, 2023 10:49 am
Forum: Containers
Topic: import adguard dns container image problem Topic is solved
Replies: 61
Views: 17130

Re: import adguard dns container image problem Topic is solved

beta will be released immediately after stable release. Probably next week.
by antonsb
Thu Apr 13, 2023 2:35 pm
Forum: Announcements
Topic: v7.9rc is released!
Replies: 253
Views: 75748

Re: v7.9rc is released!

@dynek we found what is causing this and we will try to address this in upcoming versions.
by antonsb
Thu Apr 13, 2023 12:49 pm
Forum: Announcements
Topic: v7.9rc is released!
Replies: 253
Views: 75748

Re: v7.9rc is released!

Are you seriously? containers are broken, but there is no fix. importing remote image: adguard/adguardhome, tag: latest was unable to import, container 71e2cc5c-abf7-415c-b63a-45036240aa61 not "containers", but particular ones imported that are OCI schema based. This is due to change in d...
by antonsb
Thu Apr 13, 2023 10:36 am
Forum: RouterOS beta
Topic: 100 G Network Cards // Driver
Replies: 13
Views: 6781

Re: 100 G Network Cards // Driver

previously mentioned cards were tested on bare x86 installation, if you can send exact hypervisor used and steps taken to support@mikrotik.com i can take a look.
by antonsb
Wed Apr 12, 2023 5:05 pm
Forum: RouterOS beta
Topic: 100 G Network Cards // Driver
Replies: 13
Views: 6781

Re: 100 G Network Cards // Driver

Mellanox and Chelsio adapters work with v7.
I have personally tested Mellanox CX516A and CX515A as well as Chelsio T62100-SO-CR
others should work as well. Keep in mind that only Ethernet mode is supported, if adapter is in Infiband mode, it has to be "switched" to Ethernet mode beforehand.
by antonsb
Wed Apr 12, 2023 4:48 pm
Forum: RouterOS beta
Topic: 100 G Network Cards // Driver
Replies: 13
Views: 6781

Re: 100 G Network Cards // Driver

If this is Intel 100HFA016LS or other similar Intel OmniPath - this card supports OmniPath only - no support for Ethernet at all. This card will not be supported in RouterOS.
by antonsb
Wed Apr 12, 2023 3:56 pm
Forum: Containers
Topic: import adguard dns container image problem Topic is solved
Replies: 61
Views: 17130

Re: import adguard dns container image problem Topic is solved

Hello, fix hopefully will come with next beta release.
by antonsb
Tue Apr 11, 2023 3:26 pm
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21730

Re: CubeSA 60Pro ac: 60Ghz clients flapping

Next beta (after RC and stable) release, should address some of x3 issues as well. Hopefully mdmg-fix could be switched to off onward.
by antonsb
Fri Mar 31, 2023 11:40 am
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21730

Re: CubeSA 60Pro ac: 60Ghz clients flapping

Fix should improve stability to 802.11ad line as well. Unfortunately we will not have it ready to next stable release cycle.
by antonsb
Fri Mar 31, 2023 9:45 am
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21730

Re: CubeSA 60Pro ac: 60Ghz clients flapping

We have potential fix for PtMP issues. We are still testing, but it should be ready in next beta releases.
by antonsb
Tue Mar 21, 2023 9:20 am
Forum: Containers
Topic: import adguard dns container image problem Topic is solved
Replies: 61
Views: 17130

Re: import adguard dns container image problem Topic is solved

Thanks! Well, I hope that a new release is coming soon, at least as a beta!
Fix is included in upcoming beta
by antonsb
Thu Mar 09, 2023 11:05 am
Forum: Containers
Topic: DNS not working in containers with DNS over HTTPS setup on router
Replies: 7
Views: 3971

Re: DNS not working in containers with DNS over HTTPS setup on router

Thanks for report. This is known issue - automatically "servers" field is passed to container, but in case of DOH this field does not exist, for quick fix set/change DNS in container setup to Routers DNS IP address -
/container/set <your container> dns=192.168.88.1
by antonsb
Mon Mar 06, 2023 9:14 am
Forum: General
Topic: ROSE storage
Replies: 18
Views: 5419

Re: ROSE storage

NVME-tcp has nothing to do with physical NVME disks. Target can be USB drive, NVME drive, SATA drive or even part of RAM on the device. Same goes for iSCSI and all other mentioned protocols. ARM based RB1100Dx4 Dude edition supports 4 SATA drives, making it a good candidate for ROSE package testing ...
by antonsb
Tue Feb 28, 2023 12:20 pm
Forum: RouterBOARD hardware
Topic: RB5009 USB drive oddity (USB2 vs USB3)
Replies: 5
Views: 1713

Re: RB5009 USB drive oddity (USB2 vs USB3)

is it possible to get supout.rif files from this case? Please send it to support@mikrotik.com with reference to this thread.
by antonsb
Tue Feb 28, 2023 12:17 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 138670

Re: v7.8 [stable] is released!

ROSE-MANAGER still cannot mount iscsi devices from QNAP/Synology NAS to CHR: Thanks we will check this Can you please advice how to rename the disk? I habe usb1 or nvme1 and if I change the name, the error "can not change device type (6)" appears. thanks, this is Winbox bug, should work f...
by antonsb
Fri Feb 24, 2023 8:58 am
Forum: Containers
Topic: import adguard dns container image problem Topic is solved
Replies: 61
Views: 17130

Re: import adguard dns container image problem Topic is solved

thanks for reporting this, we will check how to fix this in upcoming versions
by antonsb
Mon Feb 13, 2023 10:03 am
Forum: Announcements
Topic: v7.8rc is released!
Replies: 125
Views: 44711

Re: v7.8rc is released!

USB Gb ethernet adapter (Techole UH411) with Realtek RTL8153
This chipset was never fully supported. we will check if we can add it properly.
by antonsb
Mon Feb 06, 2023 3:03 pm
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 73139

Re: v7.8beta [testing] is released!

What is the reason for that slow transfer?
SFTP is slow single connection protocol, run multiple instances parallel to get faster results.
For rsync - please read rose manual page.
by antonsb
Wed Feb 01, 2023 5:27 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

@rameex43
make raid1 with tcp-nvme drives

@Babujnik
Thanks we will try to fix this.

@sirbryan
Simple partitioning will be available in upcoming versions. We will check what we can do about LVM or ZFS.

@issme
RDMA is different beast, currently its not planned.
by antonsb
Wed Jan 25, 2023 6:49 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

Feel free to suggest other protocols and features that should be supported.
by antonsb
Tue Jan 24, 2023 7:04 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

The rose-storage module also has command additions in /file/sync.
However that is completely undocumented and not so easy to figure out...
this is rsync, i will add documentation tomorrow for this
by antonsb
Tue Jan 24, 2023 5:57 pm
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 73139

Re: v7.8beta [testing] is released!

please comment ROSE package in designated topic viewtopic.php?t=192888
by antonsb
Tue Jan 24, 2023 3:17 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

Hello,

please fix this (SUP-104510) . Thank you
this issue is not related to new ROSE package. SMB in ROSE package currently will only support SMB2.1 SMB3.0, SMB3.1.1 dialects
by antonsb
Tue Jan 24, 2023 12:49 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

macOS fix for SMB will be available in next release
by antonsb
Mon Jan 23, 2023 6:14 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

simple "/" should work as path. Currently nfs/smb is applied to disk. If only exact folder is required on client side - use "slot/folder"
f.e. on linux initiator:
sudo mount -t nfs 10.155.166.7:/sata2/stuff /mnt/files
by antonsb
Mon Jan 23, 2023 5:23 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

Re: 7.8beta2 adds new package ROSE-storage

Windows users be aware that default built in NFS client does not support NFS v4 mode.
https://learn.microsoft.com/en-us/windo ... s-overview

maybe anyone more competent in windows systems may comment on this. Is there any good third party tools or workarounds?
by antonsb
Mon Jan 23, 2023 4:06 pm
Forum: RouterOS beta
Topic: 7.8beta2 adds new package ROSE-storage
Replies: 67
Views: 26918

7.8beta2 adds new package ROSE-storage

What's new in 7.8beta2 (2023-Jan-20 12:27): !) storage - added new "rose-storage" package support for extended disk management and monitoring functionality (ARM, ARM64, Tile and x86) (CLI only) What's new in 7.8beta3 *) rose-storage - added support for GPT partitioning (CLI-only) *) rose-s...
by antonsb
Mon Jan 23, 2023 12:48 pm
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 73139

Re: v7.8beta [testing] is released!

mount -t nfs server:/path /mountpoint
nfs-share=...
documentation is still in progress
by antonsb
Mon Jan 23, 2023 11:19 am
Forum: RouterBOARD hardware
Topic: CCR2116-12G-4S+ DOESNT RECOGNISE M.2 SSD FROM MY OLD RB1100AHX4 DUDE EDITIONS
Replies: 10
Views: 5388

Re: CCR2116-12G-4S+ DOESNT RECOGNISE M.2 SSD FROM MY OLD RB1100AHX4 DUDE EDITIONS

ROSE package includes different formatting tools, please check formatting with ROSE package enabled.
by antonsb
Mon Jan 23, 2023 11:11 am
Forum: RouterOS beta
Topic: SMB on hAP lite TC?
Replies: 4
Views: 2322

Re: SMB on hAP lite TC?

no, only power is connected to USB port for this model.
by antonsb
Mon Jan 23, 2023 10:46 am
Forum: Containers
Topic: Minio container is ready
Replies: 10
Views: 4250

Re: Minio container is ready

Free package, available for arm,arm64,Tile and x86
by antonsb
Mon Jan 23, 2023 10:08 am
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 73139

Re: v7.8beta [testing] is released!

Several comments:
Thanks noted.
by antonsb
Fri Jan 20, 2023 4:49 pm
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 73139

Re: v7.8beta [testing] is released!

Nice changelog, I don't know how to find that "rose-storage" ..
documentation draft:
https://help.mikrotik.com/docs/display/ROS/ROSE-storage

you need to install rose-storage package first
by antonsb
Fri Jan 20, 2023 10:03 am
Forum: RouterOS beta
Topic: Feature Request: Zero Trust Tunnel - Cloudflare Version
Replies: 28
Views: 9596

Re: Feature Request: Zero Trust Tunnel

So my point is if Mikrotik is going to be promoting container usage...they should try to make available on all platforms.
Please show us tools for building containers for those platforms and working example.
by antonsb
Fri Jan 20, 2023 8:09 am
Forum: Containers
Topic: Minio container is ready
Replies: 10
Views: 4250

Re: Minio container is ready

Thanks, this will be especially useful very soon :)
Edit:
https://help.mikrotik.com/docs/display/ROS/ROSE-storage
by antonsb
Tue Jan 17, 2023 2:25 pm
Forum: RouterBOARD hardware
Topic: What m2 to add to a CCR2216 switch
Replies: 5
Views: 1695

Re: What m2 to add to a CCR2216 switch

' WD Red SA500 M.2 ' will work, any SATA m.2 should work.
by antonsb
Mon Jan 16, 2023 5:05 pm
Forum: RouterBOARD hardware
Topic: CCR2116-12G-4S+ DOESNT RECOGNISE M.2 SSD FROM MY OLD RB1100AHX4 DUDE EDITIONS
Replies: 10
Views: 5388

Re: CCR2116-12G-4S+ DOESNT RECOGNISE M.2 SSD FROM MY OLD RB1100AHX4 DUDE EDITIONS

we have tested drives up to 1TB, but i don't see why larger drives would not work. From software side there is nothing that blocks larger drive use.
by antonsb
Mon Jan 16, 2023 5:03 pm
Forum: RouterBOARD hardware
Topic: What m2 to add to a CCR2216 switch
Replies: 5
Views: 1695

Re: What m2 to add to a CCR2216 switch

i have already answered this question previously.
viewtopic.php?p=953660#p953567
by antonsb
Mon Jan 16, 2023 3:35 pm
Forum: RouterBOARD hardware
Topic: What m2 to add to a CCR2216 switch
Replies: 5
Views: 1695

Re: What m2 to add to a CCR2216 switch

CCR2216-1G-12XS-2XQ supports only SATA drives in M.2 form factor slot. none of mentioned NVMe drives will work. You should look for M.2 2280 SATA III. SATA III drives support up to 6Gbps As it goes for throttling - this greatly depends on use case. For light Container use - this shouldn't be noticea...
by antonsb
Mon Jan 16, 2023 9:58 am
Forum: Containers
Topic: uptime kuma docker Topic is solved
Replies: 15
Views: 6728

Re: uptime kuma docker Topic is solved

we would need step by step how this can be repeated.
For me files always stay with correct uid,gid when upgrading from 7.6 to 7.7
by antonsb
Fri Jan 13, 2023 2:03 pm
Forum: Containers
Topic: uptime kuma docker Topic is solved
Replies: 15
Views: 6728

Re: uptime kuma docker Topic is solved

@elico
looks much better, newer versions (7.8 brach) will allow to change .type permissions without extra steps.

@TheNetworkBerg
Thanks for your videos! I will try to repeat upgrade issue.
by antonsb
Thu Jan 12, 2023 4:25 pm
Forum: Containers
Topic: uptime kuma docker Topic is solved
Replies: 15
Views: 6728

Re: uptime kuma docker Topic is solved

fix for .type will be available in next releases.
by antonsb
Thu Jan 12, 2023 1:48 pm
Forum: Containers
Topic: uptime kuma docker Topic is solved
Replies: 15
Views: 6728

Re: uptime kuma docker Topic is solved

@elico .type file inside mounts is for RouterOS to mark folder contents as not to be listed inside RouterOS. Correct fix would be not changing permissions for this file from uptime-kuma side, or allowing permission change or change the way of listing/not listing folders from RouterOS side. Deleting ...
by antonsb
Mon Jan 02, 2023 1:53 pm
Forum: Containers
Topic: uptime kuma docker Topic is solved
Replies: 15
Views: 6728

Re: uptime kuma docker Topic is solved

Thanks, i just tried, and yes, there is small bug that would not allow to start this unless you do few extra steps (fix will be available soon) Setup container setup as explained in our help page (add registry url, add installation medium, set tmpdir if not enough memory on main disk) setup mounts: ...
by antonsb
Fri Dec 30, 2022 11:11 am
Forum: Containers
Topic: D-bus Connection ERROR on Container
Replies: 4
Views: 2835

Re: D-bus Connection ERROR on Container

RouterOS is not based on systemd
by antonsb
Wed Dec 28, 2022 11:06 am
Forum: Containers
Topic: Mikrotik CCR2004-1G-12S+2X's container
Replies: 15
Views: 6949

Re: Mikrotik CCR2004-1G-12S+2X's container

So what exactly is broken? Use of the RAM disk for container storage?
In this case, cause is not related to tmpfs
by antonsb
Tue Dec 27, 2022 5:01 pm
Forum: Containers
Topic: Mikrotik CCR2004-1G-12S+2X's container
Replies: 15
Views: 6949

Re: Mikrotik CCR2004-1G-12S+2X's container

Thanks, I managed to repeat this issue. This was broken somewhere from stable 7.6 to rc, release. You can use 7.6 for now, as bare Openwrt uses only 8.8MB on arm64 systems / # cat /etc/banner _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_...
by antonsb
Fri Dec 23, 2022 2:54 pm
Forum: Containers
Topic: Mikrotik CCR2004-1G-12S+2X's container
Replies: 15
Views: 6949

Re: Mikrotik CCR2004-1G-12S+2X's container

You can use armvirt target -
docker import https://downloads.openwrt.org/snapshots/targets/armvirt/64/openwrt-armvirt-64-default-rootfs.tar.gz openwrt-arm64
docker save openwrt-arm64 > openwrt_arm64.tar
by antonsb
Wed Dec 14, 2022 3:17 pm
Forum: Announcements
Topic: v7.7rc is released!
Replies: 259
Views: 89176

Re: v7.7rc is released!

This issue brings in problem in starting containers. All I need are to re create and do some minor configurations Please elaborate. Name(slot) does not change on previously added/formatted disks. On newly done formats slot will assume new name based on physical slot. If name was "disk1", ...
by antonsb
Wed Dec 14, 2022 1:51 pm
Forum: Announcements
Topic: v7.7rc is released!
Replies: 259
Views: 89176

Re: v7.7rc is released!

Currently I have done the test on a hAP ac3 (arm) and the same thing happens, the global variables disappear from the environment after a few minutes of closing the winbox.
Thanks, we repeated the issue
by antonsb
Tue Dec 13, 2022 12:48 pm
Forum: RouterOS beta
Topic: USB ethernet NIC is reported as LTE interface
Replies: 9
Views: 4819

Re: USB ethernet NIC is reported as LTE interface

What's new in 7.7rc1 (2022-Dec-08 16:38):

*) interface - show RTL8153 CDC Modem Device as ethernet;
by antonsb
Tue Dec 13, 2022 12:03 pm
Forum: Announcements
Topic: v7.7rc is released!
Replies: 259
Views: 89176

Re: v7.7rc is released!

I can't set or get the disk name on my hap ac3.
Disks now have slot, as their name. This will be included in Winbox in future releases.

/disk set 0 slot=...
by antonsb
Mon Dec 12, 2022 1:31 pm
Forum: Announcements
Topic: v7.7rc is released!
Replies: 259
Views: 89176

Re: v7.7rc is released!

*) disk - added support for manual RAM file system (TMPFS) creation (CLI only); Great news! But this means we will not see the default behavior to change on devices that did not use a RAM file system till now? So to have consistent behavior (and paths in scripts) on all devices I create a disk of t...
by antonsb
Mon Dec 12, 2022 10:23 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

You need to add the variables for your container before you pull it down: /container/envs/add key=cap-add name=MYCONTAINER value=NET_ADMIN /container/envs/add key=device name=MYCONTAINER value=/dev/net/tun Where MYCONTAINER is the name of your container. /dev/net/tun access was added in 7.5beta4 an...
by antonsb
Wed Dec 07, 2022 3:31 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 123407

Re: v7.7beta [testing] is released!

Maybe it could be combined with a new feature to have RAMdisk on ALL devices with sufficient RAM (not only those with insufficient flash) and a compatible
and predictable way to store persistent and nonpersistent files?
maybe in next release :)
by antonsb
Tue Dec 06, 2022 10:05 am
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 123407

Re: v7.7beta [testing] is released!

Should I expect the file system on RouterOS to go from using "disk1" to "sata1-part1" as the "root" directory name? Disks will now carry names where they are physical connected - it will make finding physical disk much easier. After formatting, there will be no issues ...
by antonsb
Wed Nov 16, 2022 11:13 am
Forum: Containers
Topic: openspeedtest mikrotik ready container Topic is solved
Replies: 18
Views: 11294

Re: openspeedtest mikrotik ready container Topic is solved

nice job! Thanks for sharing!
by antonsb
Tue Nov 15, 2022 1:53 pm
Forum: Containers
Topic: /dev/stdout and /dev/stderr permission denied on many containers
Replies: 2
Views: 2956

Re: /dev/stdout and /dev/stderr permission denied on many containers

/dev/stdout and /dev/stderr permissions are fixed in latest beta releases (starting from 7.7beta6)

mounting files instead of folders are not yet implemented.
by antonsb
Mon Oct 31, 2022 2:21 pm
Forum: Containers
Topic: Error in container (Pi-hole)
Replies: 7
Views: 6263

Re: Error in container (Pi-hole)

there will be fix for similar issue in upcoming versions.
by antonsb
Mon Oct 31, 2022 11:48 am
Forum: Containers
Topic: /container: Permission denied (13) Topic is solved
Replies: 7
Views: 5948

Re: /container: Permission denied (13) Topic is solved

Fix for this will be available in next upcoming versions
by antonsb
Mon Oct 31, 2022 11:23 am
Forum: RouterOS beta
Topic: Broken x86 after upgrade to v7.1
Replies: 5
Views: 4542

Re: Broken x86 after upgrade to v7.1

Is this 32bit CPU?
x86 32bit only is not supported by RouterOS v7
by antonsb
Thu Oct 27, 2022 8:16 am
Forum: Containers
Topic: Setup Ubuntu on Docker Container Topic is solved
Replies: 4
Views: 6475

Re: Setup Ubuntu on Docker Container Topic is solved

openssh isn't installed in ubuntu containers by default. You can use shell to access your container -
/container/print
/container/shell 0
by antonsb
Mon Oct 24, 2022 10:56 am
Forum: Containers
Topic: /container: Permission denied (13) Topic is solved
Replies: 7
Views: 5948

Re: /container: Permission denied (13) Topic is solved

Thank you for reporting this, we found main cause for this issue, but it will take same time until fix will be available. Currently as workaround please mount /var/log as explained by previous posters.
by antonsb
Tue Sep 27, 2022 6:51 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

The same way tun/tap access was enabled in containers under RouterOS maybe access to usb devices can be enabled too, with a proper feature request.
this is in our to do list.
by antonsb
Thu Aug 25, 2022 11:24 am
Forum: RouterBOARD hardware
Topic: CCR2116-12G-4S+ DOESNT RECOGNISE M.2 SSD FROM MY OLD RB1100AHX4 DUDE EDITIONS
Replies: 10
Views: 5388

Re: CCR2116-12G-4S+ DOESNT RECOGNISE M.2 SSD FROM MY OLD RB1100AHX4 DUDE EDITIONS

1100AHx4 had SATA drives, CCR2116-12G-4S+ uses PCIe drives
by antonsb
Wed Aug 24, 2022 5:24 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

Thanks for detailed reports, we will look into it.
by antonsb
Mon Aug 01, 2022 8:45 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

I tried on a RB5009 and this zabbix/zabbix-proxy-sqlite3:alpine-6.0-latest tag has linux/arm64 in it: https://hub.docker.com/layers/zabbix-proxy-sqlite3/zabbix/zabbix-proxy-sqlite3/alpine-6.0-latest/images/sha256-44a5cdd64302b2a061415a3f31a31704b8aa4a15d2c31a0ae5084d20c0271a22?context=explore remot...
by antonsb
Thu Jul 28, 2022 6:00 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

I see the mounts, but I want to write to them, which is not possible (permission error).
I can't reproduce this. Please write to support with exact steps how are you getting this error and reference to this forum thread.
by antonsb
Thu Jul 28, 2022 1:37 pm
Forum: Announcements
Topic: v7.5beta [testing] is released!
Replies: 138
Views: 46162

Re: v7.5beta [testing] is released!

stop/start newly created and started container and mounts should appear. We will fully fix this in next releases.
by antonsb
Thu Jul 28, 2022 1:36 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

I'd like to see IPv6 support. thanks, noted. - The CT can't write to the mounted dirs - is that normal? Is there a way to write to them or to any place that's visible on the host? I need the container to write logs and status files. mount folders are not browsable from RouterOS, but you can access ...
by antonsb
Wed Jul 27, 2022 6:42 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

i think i got where it goes wrong. As a workaround currently you can after adding container start it, stop it and start again. Mounts should appear. we will try to fix this in next releases
by antonsb
Wed Jul 27, 2022 5:25 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

I'm running RouterOS 7.5beta4 on my hAP ac³ and: 1- mounts still doesn't work for me; 2- I noticed that a default route is not being added to my container, even though gateway is defined in interface/veth . 1. mounts needs to be removed and created again if upgraded from version with broken mounts....
by antonsb
Wed Jul 27, 2022 10:34 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

Could you allow systemd to work inside container?
NO!
That sounds good! How will it be supported?
/dev/net/tun device now is available for container use
by antonsb
Tue Jul 26, 2022 10:02 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

tun/tap support will be added in next release. Anything else to consider adding before stable release?
by antonsb
Thu Jul 21, 2022 11:38 am
Forum: Wireless Networking
Topic: CUBE 60PRO AC
Replies: 28
Views: 3784

Re: CUBE 60PRO AC

5GHz interface is designed as backup for 0.001% of time when main 60GHz interface is unavailable. it's not designed as Access point for other wireless clients or other uses.
by antonsb
Fri Jul 15, 2022 10:06 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

Mount issues should be fixed in next release. Will it be possible to add capabilities to containers? For instance, cap NET_ADMIN is required to create/use TUN/TAP virtual network devices for various functions. OpenVPN or other VPN solutions, like OpenConnect requires this functionality. currently th...
by antonsb
Mon Jul 11, 2022 10:15 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

Is it fair to assume that the MT containers do not support the equivalent of Docker bridge mode networking?

And if that is correct, is future support for bridged mode on the roadmap?
how is "bridge mode" any different from current implementation?
by antonsb
Mon Jul 11, 2022 10:12 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

mount issues are still not fully fixed - but we are working on this issue.
is there any more functionality we should consider adding before container goes to stable release?
by antonsb
Fri Jul 08, 2022 9:36 am
Forum: General
Topic: x86 Interfaces Missing
Replies: 15
Views: 1502

Re: x86 Interfaces Missing

My laptop is old though, nothing recent about it.. Two mPCIe ports and two other ports that I'm not using (one is another mPCIe, do not remember the fourth's form factor right now).. MC7355 is from 2012.. It had a MC7455 but it died a few years ago, so I put the MC7355 back.. Yes, it is time to loo...
by antonsb
Fri Jul 08, 2022 8:49 am
Forum: General
Topic: x86 Interfaces Missing
Replies: 15
Views: 1502

Re: x86 Interfaces Missing

is this still repeatable in v7? if yes - please contact support with supout.rif file.
information here is not all correct. Modems should be supported on all systems equally.
X86 installation is still supported.
by antonsb
Tue Jun 21, 2022 9:13 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

specifying directory will be possible in next release
by antonsb
Mon Jun 20, 2022 4:28 pm
Forum: RouterOS beta
Topic: 7.4beta4 Testing Docker containers
Replies: 4
Views: 3377

Re: 7.4beta4 Testing Docker containers

have you added this mount entry to container as well?
/container set 0 mounts=config
Please use main container thread for questions regarding containers.
viewtopic.php?t=178342
by antonsb
Mon Jun 20, 2022 2:13 pm
Forum: Useful user articles
Topic: Running linux server on ROS7.4 (using docker containers)
Replies: 25
Views: 23229

Re: Running linux server on ROS7.4 (using docker containers)

for lazy Bobs, there is remote-dist to dockerhub, where you can be sure that what you see is what you get.

running sshd into container is bad practice from start and is not correct use of containers all-together.
by antonsb
Mon Jun 20, 2022 11:39 am
Forum: Virtualization
Topic: 7.4 beta 4 - Container --- imported OK but will not start
Replies: 14
Views: 7038

Re: 7.4 beta 4 - Container --- imported OK but will not start

it runs for a moment (<1s) and then stops. same with debian image. in my case disk1 is an 8gb usb2 flash drive freshly formatted in winbox as ext4, but same behavior if I try to it on the device's storage are you running any command inside container? If not this is how it should behave. try runnign...
by antonsb
Mon Jun 20, 2022 10:38 am
Forum: Useful user articles
Topic: Running linux server on ROS7.4 (using docker containers)
Replies: 25
Views: 23229

Re: Running linux server on ROS7.4 (using docker containers)

why would anyone download image from unknown source when this can be done in few minutes locally and safely and to any supported architecture? make Docker file with contents - FROM ubuntu:latest RUN \ apt-get update && \ apt-get install --no-install-recommends --yes openssh-server &&...
by antonsb
Sat Jun 18, 2022 10:19 pm
Forum: RouterOS beta
Topic: Container: Way to specify working directory for remote registry work? [SOLVED]
Replies: 2
Views: 3593

Re: Container: Way to specify working directory for remote registry work? [SOLVED]

currently you can follow instructions b and c. Next releases will make pull directory configurable.
by antonsb
Fri Jun 17, 2022 4:20 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

We repeated
sudo: effective uid is not 0, is /usr/bin/sudo on a file system with the 'nosuid' option set or an NFS file system without root privileges?
issue and found the main cause. We will check what can be done.
by antonsb
Fri Jun 17, 2022 1:46 pm
Forum: Virtualization
Topic: 7.4 beta 4 - Container --- imported OK but will not start
Replies: 14
Views: 7038

Re: 7.4 beta 4 - Container --- imported OK but will not start

probably not enough memory for downloading and extracting layers. Use pre-build or pre-fetched image instead. Variant B or C in docs
by antonsb
Fri Jun 17, 2022 11:23 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

Looks like all permission issues are caused by accessing previously created containers, containers are and should be isolated from each other - if same files are required for multiple containers use mounts. Do not put mount src in root-dir either. root-dir should be on external memory for now.
by antonsb
Thu Jun 16, 2022 11:39 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161548

Re: v7.1rc3 adds Docker (TM) compatible container support

sudo: effective uid is not 0, is /usr/bin/sudo on a file system with the 'nosuid' option set or an NFS file system without root privileges? Please check that the disk is mounted as disk1, also check if reformatting from RouterOS helps. I have similar setup, only difference my disk is formatted with...
by antonsb
Thu Jun 16, 2022 11:35 pm
Forum: RouterOS beta
Topic: posts not strictly related to: v7.4beta [testing]
Replies: 165
Views: 12294

Re: v7.4beta [testing] is released!

@bma and others, regarding container - please use other threads to discuss container in detail
by antonsb
Thu Jun 16, 2022 11:00 pm
Forum: RouterOS beta
Topic: posts not strictly related to: v7.4beta [testing]
Replies: 165
Views: 12294

Re: v7.4beta [testing] is released!

set environmental variables as per docs DNSMASQ_USER should be root
by antonsb
Thu Jun 16, 2022 5:02 pm
Forum: Announcements
Topic: v7.4beta [testing] is released!
Replies: 189
Views: 60993

Re: v7.4beta [testing] is released!

Two quick questions about containers:

1) are veth interfaces mandatory, or can host networking be used?
2) the docs state that ext4 is supported, is this new? Any plans to add ext4 support to Disks > Format Drive?
1) Yes
2) Disks are formatted from RouterOS as ext4 for a while now.
by antonsb
Thu Jun 16, 2022 11:13 am
Forum: RouterBOARD hardware
Topic: CCR2004-1G-2XS-PCIe Not Showing Up in lspci
Replies: 17
Views: 1816

Re: CCR2004-1G-2XS-PCIe Not Showing Up in lspci

CCR2004-1G-2XS-PCIe is istalled in first PCIe3.0 slot?
by antonsb
Thu Jun 16, 2022 10:46 am
Forum: RouterBOARD hardware
Topic: Cube 60G ac - rattling noise?
Replies: 4
Views: 1846

Re: Cube 60G ac - rattling noise?

If there is slight rattling - this does not affect functionality, devices will work fine.
If there is part loose inside shell - return it to RMA.
Shells are welded, they are not designed to be taken apart.
by antonsb
Tue Jun 14, 2022 8:39 am
Forum: Wireless Networking
Topic: 60g Nray random lockup
Replies: 5
Views: 781

Re: 60g Nray random lockup

next v7 beta version will have potential fix for this issue. Do you know the cause of this behaviour? We have dozen of nray link in production since months/years and only this specific link has this trouble. We even replaced both nray and tried to swap a nray by a wap60. Knowing the cause would hel...
by antonsb
Mon Jun 13, 2022 1:25 pm
Forum: Wireless Networking
Topic: 60g Nray random lockup
Replies: 5
Views: 781

Re: 60g Nray random lockup

next v7 beta version will have potential fix for this issue.
by antonsb
Mon Jun 13, 2022 11:03 am
Forum: Wireless Networking
Topic: CubeG-5ac60ad Test report error?
Replies: 1
Views: 471

Re: CubeG-5ac60ad Test report error?

that table explains 802.11ad standard available rates.
those devices does not support MCS 5 and 9 and other MCS's are disabled to improve stability.
by antonsb
Fri Jun 10, 2022 3:44 pm
Forum: RouterBOARD hardware
Topic: CCR2004-1G-2XS-PCIe network chip
Replies: 45
Views: 7869

Re: CCR2004-1G-2XS-PCIe network chip

@antonsb is there any planning for other OS/hypervisor support, e.g. VMware ESXi 7.x ?
we will look into it
by antonsb
Fri Jun 10, 2022 1:14 pm
Forum: RouterBOARD hardware
Topic: CCR2004-1G-2XS-PCIe network chip
Replies: 45
Views: 7869

Re: CCR2004-1G-2XS-PCIe network chip

@tensioncore @pe1chl
this card currently has drivers in Linux latest Linux kernels and BSD.

@ns88ns
no bifurcation required, Linux system will see 4 network devices
by antonsb
Wed Jun 08, 2022 10:49 am
Forum: RouterBOARD hardware
Topic: Cube 60G ac - rattling noise?
Replies: 4
Views: 1846

Re: Cube 60G ac - rattling noise?

5GHz antenna holder allows some play on early models - this is fixed in later revisions.
Devices can't be opened without destroying outer case.
by antonsb
Wed Jun 08, 2022 10:47 am
Forum: Announcements
Topic: v7.4beta [testing] is released!
Replies: 189
Views: 60993

Re: v7.4beta [testing] is released!

return container support
soon! just some minor things left.
by antonsb
Wed Mar 09, 2022 12:43 pm
Forum: RouterBOARD hardware
Topic: RBM33G with two WifiCards
Replies: 9
Views: 6014

Re: RBM33G with two WifiCards

Using two PCIe cards or USB based (LTE modems) are supported, but there are some limitations. To use two LTE modems - USB lines has to be switched by removing jumper near USB port. If two pcie (wireless) cards needs to be used - there are some limitations to bus speeds that may cause performance iss...
by antonsb
Mon Nov 15, 2021 12:23 pm
Forum: RouterBOARD hardware
Topic: case design files for rb435g
Replies: 2
Views: 3084

Re: case design files for rb435g

https://mikrotik.com/product/RB435G#fndtn-downloads
Under Downloads you will find dimensions pdf that will help you to design enclosure.
by antonsb
Wed Nov 10, 2021 12:12 pm
Forum: Scripting
Topic: tool fetch http post txt [SOLVED]
Replies: 4
Views: 4716

Re: tool fetch http post txt [SOLVED]

you are missing http-method
by antonsb
Tue Sep 28, 2021 9:28 am
Forum: Wireless Networking
Topic: nRAY vs LHG 60G
Replies: 29
Views: 6446

Re: nRAY vs LHG 60G

judging from signal strength - your alignment is way off.
by antonsb
Mon Sep 27, 2021 4:18 pm
Forum: Announcements
Topic: v6.49rc [testing] is released!
Replies: 36
Views: 19331

Re: v6.49rc [testing] is released!



This is due low gain antenna? WHich is the difference from LHG60?
nRay and LHG 60G is supposed to be capable same link lengths. Why to lower power limit for the nRay and not for LHG 60G? How that will play out?
This power limit is active when "region=eu" is used
by antonsb
Fri Sep 10, 2021 4:27 pm
Forum: Wireless Networking
Topic: Find specific SSID using Scan function [SOLVED]
Replies: 7
Views: 4441

Re: Find specific SSID using Scan function [SOLVED]

sure, sorry i gave v7 compatible code v6 will look like this foreach i in=([/interface wireless scan wlan1 duration=5 as-value]) do={if (($i->"ssid")="Test_Network") do={:put $i}} so what does this do: /interface wireless scan wlan1 duration=5 as-value does scan for 5 seconds and...
by antonsb
Wed Sep 08, 2021 4:12 pm
Forum: Wireless Networking
Topic: Find specific SSID using Scan function [SOLVED]
Replies: 7
Views: 4441

Re: Find specific SSID using Scan function [SOLVED]

yes, you can in multiple different ways: 1) if you can connect to network - you can check interface status (running or not) and based on that write a script 2) if you can't connect you can check log messages when interface tries to connect, but fails 3) You can run scan and check if ssid is present ...
by antonsb
Mon Aug 30, 2021 8:23 am
Forum: Wireless Networking
Topic: LHG60 Signal Value [SOLVED]
Replies: 2
Views: 1689

Re: LHG60 Signal Value [SOLVED]

Signal is representation of signal quality in percents. It depends on MCS used and crc error rate.
by antonsb
Tue Jun 01, 2021 4:44 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11940

Re: 60g new frequencies since 6.82

802.11ad works worse in cold weather not becouse it is freezing. Cold air becomes more dense and amount of oxigen per squere mitter increases.
This is True, but we had some software improvements regarding this as well:
6.49beta46:
*) w60g - improved stability in low temperature environments
by antonsb
Tue Jun 01, 2021 4:40 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11940

Re: 60g new frequencies since 6.82

Antonsb with the New regulations in the UK coming into force in November 30th, do you think Mikrotik will add a power control to turn down the output of the Nray to 40dBm to comply? https://www.ofcom.org.uk/__data/assets/pdf_file/0023/218129/2021-LE-exemption-statement-final.pdf Regards Paul we wil...
by antonsb
Tue Jun 01, 2021 10:57 am
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11940

Re: 60g new frequencies since 6.82

this will be available on new 802.11ay hardware.
Unfortunately this cannot be used reliably on our existing 802.11ad devices - that is why this frequency support is removed
Antonsb it works well.... what we are missing?
stability in raised ambient temperatures
by antonsb
Mon May 31, 2021 2:49 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11940

Re: 60g new frequencies since 6.82

this will be available on new 802.11ay hardware.
Unfortunately this cannot be used reliably on our existing 802.11ad devices - that is why this frequency support is removed
by antonsb
Tue Apr 20, 2021 8:00 am
Forum: Wireless Networking
Topic: w60g link stability and erratic rate selections since ROS 6.47
Replies: 24
Views: 7106

Re: w60g link stability and erratic rate selections since ROS 6.47

Next beta version will have possible fixes for some disconnection issues.
by antonsb
Mon Apr 19, 2021 11:19 am
Forum: Wireless Networking
Topic: Mikrotik 60Ghz Link Question is it possible?
Replies: 1
Views: 840

Re: Mikrotik 60Ghz Link Question is it possible?

Yes, devices can be used in routing mode as well.
by antonsb
Fri Apr 16, 2021 3:03 pm
Forum: Wireless Networking
Topic: 60g new frequencies since 6.48.2
Replies: 48
Views: 11940

Re: 60g new frequencies since 6.82

this change was target to testing branch.
but now when cat is out of the bag:
Do not expect much from devices without significant antenna gain (wAP and SXT series)
Performance should be similar to 66000MHz channel.
by antonsb
Mon Dec 28, 2020 2:24 pm
Forum: Wireless Networking
Topic: Terragraph
Replies: 15
Views: 4277

Re: Terragraph

official announcements will be released only after product will be closer to finishing stage.
Hardware and software currently is close to that point.
by antonsb
Mon Dec 07, 2020 12:00 pm
Forum: RouterBOARD hardware
Topic: Wireless wire cube, what should I do?
Replies: 4
Views: 2191

Re: Wireless wire cube, what should I do?

As usualy I'm lucky to get broken hardware... Check this vid: https://drive.google.com/file/d/1kMckHbHpJ3C90IOOFgmKvybpNl2YpoUR/view?usp=sharing In short, there is something loose inside. Should I RMA it? or open and fix by myself? does opening voids waranty? Thanks for advice. Opening this device ...
by antonsb
Tue Dec 01, 2020 12:21 pm
Forum: RouterBOARD hardware
Topic: CubeG-5ac60ad
Replies: 23
Views: 6912

Re: CubeG-5ac60ad

Mikrotik guys, could you answer please? Will this bonding failover work properly in a PtMP setup, when done only on the station side? (Cube as station, connected to separate 5GHz and 60GHz sector APs on the same switch.) Yes, this can be reconfigured to work in such way. On 60GHz AP side add VLAN, ...
by antonsb
Tue Dec 01, 2020 12:19 pm
Forum: RouterBOARD hardware
Topic: CubeG-5ac60ad
Replies: 23
Views: 6912

Re: CubeG-5ac60ad

Looks like it will use bonding for failover https://help.mikrotik.com/docs/display/ROS/Fail-over+PtP+CLIexample Bonding failover is waaaaaaaaaaaaay too slow. Modern day failover times should be less than a second Only 1 way I know of to accomplish this in the MikroTik world, and thats with OSPF and...
by antonsb
Wed Oct 28, 2020 7:31 pm
Forum: Wireless Networking
Topic: LHG60GHz PTP 1,1km
Replies: 1
Views: 698

Re: LHG60GHz PTP 1,1km

This product is designed as PtP device or as CPE in PtMP setups, radiation is too narrow to be used for PtMP setups as AP.
High distance calibration for ap-bridge mode doesn't even exist on this device.
For AP please select appropriate device - wAP60G AP, or wAP60Gx3 AP.
by antonsb
Thu Oct 22, 2020 1:57 pm
Forum: RouterBOARD hardware
Topic: new hardware Wireless Wire nRAY 60 ghz
Replies: 76
Views: 23691

Re: new hardware Wireless Wire nRAY 60 ghz

I have seen that NRAY can be mounted rotated 90° changing antenna polarization this can help with rain and colocation?
Yes for experimental purposes, that's why we used horizontal Ethernet gland. Please keep in mind that dish design has drain hole, that needs to be sealed if used like that.
by antonsb
Thu Oct 15, 2020 5:29 pm
Forum: Wireless Networking
Topic: w60g link stability and erratic rate selections since ROS 6.47
Replies: 24
Views: 7106

Re: w60g link stability and erratic rate selections since ROS 6.47

this is fixed in 6.48beta48, fix will also be merged in next stable release
by antonsb
Thu Oct 15, 2020 4:37 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

Latest testing build includes some stability fixes, that will be put in upcoming current version.
by antonsb
Thu Oct 15, 2020 4:36 pm
Forum: Announcements
Topic: v6.48beta [testing] is released!
Replies: 184
Views: 114677

Re: v6.48beta [testing] is released!

May we expect the 60G devices to still be broken? I have talked with Mikrotik's support about this problem for some time. They have applied a fix in 6.48beta48, which fixed the issues for me. My 3,7km Link is stable again with 6.48beta48. It had massive stability issues (very frequent disconnects) ...
by antonsb
Mon Oct 12, 2020 5:13 pm
Forum: RouterOS beta
Topic: Wireguard not working behind internet facing router with DSTNAT v7.1beta2
Replies: 57
Views: 18618

Re: Wireguard not working behind internet facing router with DSTNAT v7.1beta2

we have possible fix for this issue, that will be included in upcoming version.
by antonsb
Wed Aug 26, 2020 1:41 pm
Forum: Wireless Networking
Topic: MikroTik RBwAPG-60adkit Wireless Wire - Disconnect issues
Replies: 11
Views: 2059

Re: MikroTik RBwAPG-60adkit Wireless Wire - Disconnect issues

From picture it seems, that nearby trees may be covering line of sight during winds, please try with higher frequencies as well.
by antonsb
Wed Aug 26, 2020 9:49 am
Forum: General
Topic: RBM33g. two miniPCIe and USB port used.
Replies: 3
Views: 919

Re: RBM33g. two miniPCIe and USB port used.

Yes you can. Only USB lines are shared between mPCIe slot 1 and USB port. If lte card is installed in mPCIe2 and wireless card in mPCIe1 (wireless cards utilize PCI lines) USB can be used for LTE modem.
by antonsb
Wed Aug 26, 2020 9:43 am
Forum: RouterBOARD hardware
Topic: Can the USB interface of the mAP lite be used with a powered hub?
Replies: 7
Views: 3113

Re: Can the USB interface of the mAP lite be used with a powered hub?

USB data lines are not connected on mAP lite.
Please consider mAP:
https://mikrotik.com/product/RBmAP2nD
as it has full USB functionality.
by antonsb
Tue Aug 25, 2020 10:41 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

Device goes through pre-calibrated data over 3 degree span showing offset from center. Expecting that this will work outside calibrated span is ridiculous. If device is turned 20 degrees of, there is no way it's using main lobe, but is connected by side lobe that disturbs normal beamforming operatio...
by antonsb
Mon Aug 24, 2020 3:28 pm
Forum: Wireless Networking
Topic: MikroTik RBwAPG-60adkit Wireless Wire - Disconnect issues
Replies: 11
Views: 2059

Re: MikroTik RBwAPG-60adkit Wireless Wire - Disconnect issues

everything seems to be in order, are devices aligned correctly? Is there anything blocking path?
by antonsb
Mon Aug 24, 2020 1:08 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

I disagree. MikroTik engineers don't need to talk about customers individual deployments and environmental conditions. Just clarify how exactly it works For instance nobody seems to know anything about the sector numbers Are the sector numbers arrange in a grid like 1 2 3 4 5 6 7 8 9 Or maybe its 1...
by antonsb
Mon Aug 24, 2020 12:52 pm
Forum: Wireless Networking
Topic: MikroTik RBwAPG-60adkit Wireless Wire - Disconnect issues
Replies: 11
Views: 2059

Re: MikroTik RBwAPG-60adkit Wireless Wire - Disconnect issues

Hello,

RSSI is too low, set tx-sector to auto and check if that improves situation.
by antonsb
Fri Aug 21, 2020 10:02 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

And what about if its rapidly changing but the mount is solid? This should only happen after reboot or lost connection. Can reflection from a device behind it be the cause? Since its mounted directly behind a AF24HD Internal frequencies may overlap. For test you may try to move it a bit further if ...
by antonsb
Thu Aug 20, 2020 12:27 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

frequency=auto picks first free channel (checks available SSIDs, in channel before selection) frequent tx-sector changes indicate, that there is issue related to devices moving in wind or alignment issues. In theory tx-sector should only change on very rare occasions - during first minutes of establ...
by antonsb
Thu Jun 18, 2020 1:21 pm
Forum: Wireless Networking
Topic: SXTsq Lite60 Point-to-Point link [SOLVED]
Replies: 2
Views: 2782

Re: SXTsq Lite60 Point-to-Point link [SOLVED]

"Connected clients are treated as individual interfaces, after successful connection new station interface is created. "
https://wiki.mikrotik.com/wiki/Manual:Interface/W60G

Put wlan60-station-1 interface into bridge on master device side.
by antonsb
Tue May 05, 2020 11:43 am
Forum: Useful user articles
Topic: USB Outdoor temperature sensor
Replies: 17
Views: 18011

Re: USB Outdoor temperature sensor

This can be done from RouterOS as well. Make simple Arduino||STM32 board with temperature sensor attached (DHT22 for example), that listens to serial input and answers with sensor data. In RouterOS if serial device is attached - disabled ppp-client is created. Make simple script, that does at-chat t...
by antonsb
Mon Apr 27, 2020 10:06 am
Forum: Announcements
Topic: v6.47beta [testing] is released!
Replies: 269
Views: 179716

Re: v6.47beta [testing] is released!

thanks for reply. but it's not working
What device are you using? Is reset button acting as WPS button on this device as well?
by antonsb
Fri Apr 24, 2020 6:06 pm
Forum: Announcements
Topic: v6.47beta [testing] is released!
Replies: 269
Views: 179716

Re: v6.47beta [testing] is released!

system routerboard reset-button set on-event=??????
OK. now how to set event ?

Update: event on scripts must be entered.
wiki is also updated:
https://wiki.mikrotik.com/wiki/Manual:R ... et_buttons
by antonsb
Fri Dec 06, 2019 11:37 am
Forum: Wireless Networking
Topic: Wireless Wire 60GHz Issues
Replies: 2
Views: 2284

Re: Wireless Wire 60GHz Issues

Please make sure that you are using latest software releases - there a lot of quality improvements between older and newer software versions.
Alignment LEDs should be followed when alignment mode is on:
/interface w60g align wlan60-1
by antonsb
Thu Nov 07, 2019 5:50 pm
Forum: Wireless Networking
Topic: Current operator MCC+MNC
Replies: 6
Views: 3691

Re: Current operator MCC+MNC

/interface lte at-chat lte input="AT+COPS\?"
should give back active PLMN
by antonsb
Thu Nov 07, 2019 5:45 pm
Forum: General
Topic: R11e-LTE-US Frequency Lock
Replies: 3
Views: 1453

Re: R11e-LTE-US Frequency Lock

Unfortunately this is not supported on US modems
by antonsb
Tue Sep 17, 2019 2:57 pm
Forum: Wireless Networking
Topic: r11e-lte-us band locking
Replies: 5
Views: 4276

Re: r11e-lte-us band locking

this feature is currently not available for US modems
by antonsb
Thu Aug 08, 2019 11:58 am
Forum: Wireless Networking
Topic: Bondig WIFI links 60G and 5G
Replies: 15
Views: 4546

Re: Bondig WIFI links 60G and 5G

bounding with active backup will switch over in less than 0.3 seconds if 60GHz link is lost
by antonsb
Fri Jul 26, 2019 1:15 pm
Forum: Wireless Networking
Topic: Connecting ASUS ROG phone to WAP60G
Replies: 4
Views: 1894

Re: Connecting ASUS ROG phone to WAP60G

Currently only MikroTik to MikroTik communication is supported.
by antonsb
Wed Jul 03, 2019 10:57 pm
Forum: Wireless Networking
Topic: Performance Microtik Wireless Dish
Replies: 48
Views: 9638

Re: Performance Microtik Wireless Dish

Well I'm out of ideas. Try a different channel? The 23% packet error rate isn't great. Still makes me think the signal's too hot. @antons? Signal may be too hot, but in this case it seems that this is caused somewhere else. Is there any other devices in between PCs and Wireless Wire dishes? My firs...
by antonsb
Mon Jul 01, 2019 5:23 pm
Forum: Wireless Networking
Topic: Performance Microtik Wireless Dish
Replies: 48
Views: 9638

Re: Performance Microtik Wireless Dish

please add multiple parallel streams with -P option, for UDP, you have to set transfer speed as well.
by antonsb
Fri Jun 28, 2019 4:51 pm
Forum: Wireless Networking
Topic: Performance Microtik Wireless Dish
Replies: 48
Views: 9638

Re: Performance Microtik Wireless Dish

Btest is limited by device resources. Please run Btest on other, powerfull devices through created 60GHz link
by antonsb
Wed Jun 19, 2019 2:39 pm
Forum: Wireless Networking
Topic: Great news: Terragraph
Replies: 12
Views: 5195

Re: Great news: Terragraph

While Terragraph is still in development - Similar networks can be already made by using our devices, as explained by Attila Bologh in MUM Hungary 2019 https://mum.mikrotik.com/presentations/HU19/presentation_6777_1559506180.pdf This approach is a bit different - currently unavailable feature of AP ...
by antonsb
Fri Jun 14, 2019 4:36 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

max L2MTU for w60g is 7882
by antonsb
Thu May 02, 2019 1:36 pm
Forum: Wireless Networking
Topic: RBwAPG-60ad wireless wire troubleshooting
Replies: 1
Views: 1297

Re: RBwAPG-60ad wireless wire troubleshooting

could you please post configuration from both sides of the link?

please paste output from:
/interface w60g export hide-sensitive
by antonsb
Fri Mar 15, 2019 6:38 pm
Forum: Beginner Basics
Topic: 'Modem Unsupported!' AirCard 815S Firmware NTG9X40C_11.14.08.35
Replies: 3
Views: 1786

Re: 'Modem Unsupported!' AirCard 815S Firmware NTG9X40C_11.14.08.35

Those are capabilities not supported by this modem.
by antonsb
Fri Feb 15, 2019 2:50 pm
Forum: Virtualization
Topic: PCI passthrough and USB passthrough not working [SOLVED]
Replies: 6
Views: 18528

Re: PCI passthrough and USB passthrough not working [SOLVED]

Intel wireless adapters are not supported under RouterOS
by antonsb
Fri Feb 08, 2019 2:18 pm
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 39309

Re: v6.43.11 [stable] is released!

I have a MIKRO TIK RBwAPG-60ad KIT.
Data is only updated when beamforming is working - we will fix this in upcoming versions
by antonsb
Fri Feb 08, 2019 1:58 pm
Forum: Wireless Networking
Topic: Wireless Wire - expected throughput?
Replies: 8
Views: 4013

Re: Wireless Wire - expected throughput?

In 50m distance - there will be no issues getting full speed in all weather conditions
by antonsb
Fri Feb 08, 2019 10:17 am
Forum: General
Topic: Bandwidth Test maximum speed
Replies: 4
Views: 2751

Re: Bandwidth Test maximum speed

please make sure that you are using latest RouterOS versions. Btest has gone from single core process to multicore.
by antonsb
Fri Feb 08, 2019 10:14 am
Forum: RouterBOARD hardware
Topic: LtAP Mini GPS useless without antenna
Replies: 82
Views: 27895

Re: LtAP Mini GPS useless without antenna

Hi All,

so disappointed with Mikrotik, after those years and ...
Looks like wrong baud rate.
by antonsb
Fri Feb 08, 2019 9:04 am
Forum: Wireless Networking
Topic: How to Configure (settings) Multiple Wireless Wire bridges (two wAP60G)s on Same Network
Replies: 15
Views: 3860

Re: How to Configure (settings) Multiple Wireless Wire bridges (two wAP60G)s on Same Network

Thanks Great and Easy but a couple other questions. 1. Devices are in transparent bridge (Layer 2) mode - this won't cause any issues, by exception if you are using same 192.168.88.0/24 network and trying to access the devices. To access the devices set correct IP addresse to the bridge interface. ...
by antonsb
Thu Feb 07, 2019 2:53 pm
Forum: Wireless Networking
Topic: Wireless Wire - expected throughput?
Replies: 8
Views: 4013

Re: Wireless Wire - expected throughput?

Hello, most of the tests are done by using internal traffic generating tool - bandwidth test. This tool runs on internal device resources - and before latest updates utilized only one core of 4 core ARM CPU. With latest RouterOS releases this test runs on all cores, but we still recommend testing by...
by antonsb
Thu Feb 07, 2019 10:24 am
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 41455

Re: Significant improvement for 60 GHz solutions

please show us exactly how are you testing this. We get full speed on much higher distances by using same testing tools.
make sure that testing PCs has enough power, if possible run test in multi core mode, use multiple streams as well.
by antonsb
Wed Feb 06, 2019 1:27 pm
Forum: Wireless Networking
Topic: How to Configure (settings) Multiple Wireless Wire bridges (two wAP60G)s on Same Network
Replies: 15
Views: 3860

Re: How to Configure (settings) Multiple Wireless Wire bridges (two wAP60G)s on Same Network

out of box devices are configured as transparent bridge (think of them as replacing existing cable). Addresses are static and you won't be able to access devices by using IP address if you are not in same subnet (traffic will still be passed through this wireless bridge). Other than that everything ...
by antonsb
Wed Feb 06, 2019 1:11 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

we try alignment many times but this is best, why rssi not below -49... whats your suggestions for this distance ?
Signal is fine. is this PtP or PtMP setup? Is latest version used on both sides? Are devices mounted on fixed / stable pole?
by antonsb
Wed Feb 06, 2019 8:27 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

how can fixed it
frequency-list was renamed to scan-list in one of beta releases.
by antonsb
Tue Feb 05, 2019 1:31 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

All links works stable in heavy snow in Poland, our customers have 400mm and 600mm alu dishes. They use ros 6.42.11, 6.43.8 is not stable... what exactly is not stable? thank you for replay when test it it put frequency=auto and no connection ?? what you think about it "auto" does not inc...
by antonsb
Tue Feb 05, 2019 9:03 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93128

Re: wAP 60G experience

Hello. We have a strange problem. We made a PtMP on wAP 60G (v6.44beta40) with 5 clients (4 LHG and 1 wAP same ROS version). Everything is working fine, but when anyone will shutdown MT (or reboot it) then we get disconnect on all stations and they don't want to connect again. We have to manually d...
by antonsb
Thu Jan 31, 2019 6:37 pm
Forum: Wireless Networking
Topic: WAP60G-AP
Replies: 13
Views: 4454

Re: WAP60G-AP

please send supout.rif files from both of the devices to support@mikrotik.com
by antonsb
Thu Jan 31, 2019 4:50 pm
Forum: Wireless Networking
Topic: What is the best ROS version for 60Ghz now?
Replies: 2
Views: 1466

Re: What is the best ROS version for 60Ghz now?

this issue will be addressed in upcoming releases (already fixed in beta70 - that will be released in upcoming days)
by antonsb
Thu Jan 31, 2019 4:44 pm
Forum: Wireless Networking
Topic: Problems cell locking
Replies: 1
Views: 1572

Re: Problems cell locking

Hi, Im using a R11e-LTE in which im trying to use the cell locking feature in the newest os V6.44. However, i cannot send a AT chat command while the modem is in use and if i reset the modem the cell lock is removed as noted by the wiki. https://wiki.mikrotik.com/wiki/Manual:Interface/LTE#Using_Cel...
by antonsb
Tue Jan 15, 2019 12:26 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

LEDs in your picture show that it's still connected
by antonsb
Thu Dec 27, 2018 1:35 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 82702

Re: v6.43.8 [stable] is released!

Where can one find the new snmp values ? "snmp - added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values;" Its not listen under "interface wireless" or "interface wireless registration-tabel". Checked both Ap a...
by antonsb
Thu Dec 27, 2018 10:26 am
Forum: Wireless Networking
Topic: RB4011 Wireless rack ears?
Replies: 1
Views: 978

Re: RB4011 Wireless rack ears?

Rack "ears" can only be attached to non wireless version.
by antonsb
Mon Dec 17, 2018 11:47 am
Forum: RouterBOARD hardware
Topic: LtAP Dual SIM Setup
Replies: 6
Views: 4184

Re: LtAP Dual SIM Setup

Add APN profile selection line together with changing SIM slot line:
/interface lte set lte1 apn-profiles=...
by antonsb
Mon Dec 10, 2018 8:45 am
Forum: Wireless Networking
Topic: Raspberry Pi3 Mod.B and 2.4 WiFi on hAP with Band 2GHz-Only-N don't work together"
Replies: 4
Views: 1457

Re: Raspberry Pi3 Mod.B and 2.4 WiFi on hAP with Band 2GHz-Only-N don't work together"

6.43rc3
*) wireless - improved compatibility with BCM chipset devices

Would it not be better to recommend 6.43.7 stable that would have all the RC stuff inn it?
Does this looks like suggesting older versions?
Are you running latest RouterOS versions?
by antonsb
Mon Dec 10, 2018 8:06 am
Forum: Wireless Networking
Topic: Raspberry Pi3 Mod.B and 2.4 WiFi on hAP with Band 2GHz-Only-N don't work together"
Replies: 4
Views: 1457

Re: Raspberry Pi3 Mod.B and 2.4 WiFi on hAP with Band 2GHz-Only-N don't work together"

Similar issues was fixed some time ago:
6.43rc3
*) wireless - improved compatibility with BCM chipset devices

Are you running latest RouterOS versions?
by antonsb
Wed Dec 05, 2018 8:24 am
Forum: General
Topic: Feature requests
Replies: 1740
Views: 631688

Re: Feature requests

Multithread support for btest is already added:
Version 6.44beta39 has been released.
*) btest - added multithreading support for both UDP and TCP tests;
by antonsb
Tue Dec 04, 2018 12:21 pm
Forum: Beginner Basics
Topic: How to configure wAP 60G? [SOLVED]
Replies: 2
Views: 3310

Re: How to configure wAP 60G? [SOLVED]

If you are using Wireless Wire kit - devices are pre-configured as transparent bridge and this usage case will work without any extra configuration.
In your case devices has not linked together, check if power is supplied to both of them.
by antonsb
Tue Dec 04, 2018 11:40 am
Forum: Wireless Networking
Topic: passive scan
Replies: 1
Views: 1347

Re: passive scan

Scan without sending out probe requests from device running passive scan.
by antonsb
Thu Nov 29, 2018 12:46 pm
Forum: Wireless Networking
Topic: Wap 60G problems in winter, disconnects
Replies: 5
Views: 1936

Re: Wap 60G problems in winter, disconnects

is there any snow on front cover? Maybe device has alignment problems?
by antonsb
Wed Nov 28, 2018 7:31 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 169148

Re: v6.44beta [testing] is released!

Finally test uses all cores of the routerboard... Have you checked BTest? MT Staff: why create speed-test? You already have BTest - develop it! :) I gave up on btest long time ago, and iperf is not always possible :( Please read carefully through change log: *) btest - added multithreading support ...
by antonsb
Tue Nov 27, 2018 12:25 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

Yup also using the latest beta. On two separate links of +-1800m and 2000m cannot even make a single link. Using 64800 and 66000. You would think after aiming for a while there would at least be a connection - a bad one at least. please check if scan-list on "station-bridge" device includ...
by antonsb
Tue Nov 27, 2018 8:14 am
Forum: General
Topic: RBLHGG-60adkit IP address change problem
Replies: 4
Views: 1164

Re: RBLHGG-60adkit IP address change problem

Thank you for reporting this - this Quickset issue will be fixed in upcoming releases. Currently you can change address from IP menu
by antonsb
Mon Nov 26, 2018 2:50 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

66GHz is mandatory on 2200+ meters!
Not exactly true -

connected: yes
frequency: 64800
remote-address: 04:D6:AA:AF:D3:C6
tx-mcs: 8
tx-phy-rate: 2.3Gbps
signal: 80
rssi: -57
distance: 2409.94m
by antonsb
Wed Nov 21, 2018 6:20 pm
Forum: Wireless Networking
Topic: wAP60G AP disconnects
Replies: 4
Views: 1869

Re: wAP60G AP disconnects

Hello,
Is this issue reproducible in latest beta version?
by antonsb
Wed Nov 21, 2018 10:40 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

Each version of RouterOS includes a lot of changes, it would help us, if you write versions you are using.
by antonsb
Fri Nov 16, 2018 4:05 pm
Forum: Wireless Networking
Topic: Lhg60G microinterruption
Replies: 4
Views: 1403

Re: Lhg60G microinterruption

What RouterOS version are you using? Are you moving open Winbox screen around? Do you have stable connection to the device you are monitoring?
by antonsb
Fri Nov 16, 2018 12:43 pm
Forum: Wireless Networking
Topic: Lhg60G microinterruption
Replies: 4
Views: 1403

Re: Lhg60G microinterruption

First five to ten minutes device is "learning" - there will be some drops in traffic during this period. We would recommend testing with traffic generated outside testing system (BTest is not the best tool to be used on device under test) If this issue repeats please send us supout.rif fil...
by antonsb
Fri Nov 16, 2018 9:48 am
Forum: Wireless Networking
Topic: Nonstandard 60GHz channel, why 66000 and not 66960 MHz?
Replies: 6
Views: 7269

Re: Nonstandard 60GHz channel, why 66000 and not 66960 MHz?

Anyone care to share with the less enlightened how exactly you go about enabling it in the CLI, and which beta version of the software you have to use? Is it under interface/wireless/channels/add?? On station make sure that frequency-list (or scan-list depending on used RouterOS version) includes d...
by antonsb
Fri Nov 09, 2018 1:52 pm
Forum: Wireless Networking
Topic: LHG 60, DROPS OUt
Replies: 8
Views: 2994

Re: LHG 60, DROPS OUt

yes, align mode currently is only in latest beta versions.
by antonsb
Fri Nov 02, 2018 9:35 am
Forum: RouterBOARD hardware
Topic: 60Ghz Perplexed
Replies: 6
Views: 2448

Re: 60Ghz Perplexed

upgrade you wAP60G devices and performance will be similar.
by antonsb
Wed Oct 24, 2018 12:44 pm
Forum: Wireless Networking
Topic: LHG 60, DROPS OUt
Replies: 8
Views: 2994

Re: LHG 60, DROPS OUt

please provide versions used on those links and make sure you are running latest ones - there a lot of changes and improvements in latest releases. Antonsb latest FW 6.43.4 is not usable during the alignment the RSSI value update after several seconds (>30) or it don't update, I wasted 3 hours befo...
by antonsb
Wed Oct 24, 2018 12:37 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

New beta versions has alignment mode included (it will update information much faster)
to use run from CLI:
/interface w60g align wlan60-1
by antonsb
Tue Oct 23, 2018 4:29 pm
Forum: Wireless Networking
Topic: LHG 60, DROPS OUt
Replies: 8
Views: 2994

Re: LHG 60, DROPS OUt

please provide versions used on those links and make sure you are running latest ones - there a lot of changes and improvements in latest releases.
by antonsb
Mon Oct 22, 2018 8:22 pm
Forum: General
Topic: LHG60 Link goes down when it rains
Replies: 21
Views: 4712

Re: LHG60 Link goes down when it rains

Form supout.rif files - RSSI signal on one side is way off. Latest beta version includes align mode - for easier alignment. it would help us improve, if we get some user feedback. To use align mode run on both sides: /interface w60g align wlan60-1 RSSI and sector information will change rapidly, adj...
by antonsb
Mon Oct 22, 2018 11:15 am
Forum: General
Topic: LHG60 Link goes down when it rains
Replies: 21
Views: 4712

Re: LHG60 Link goes down when it rains

Hello,
Those signal levels are too low for such distance.
What RouterOS version are you using? Are the dishes perfectly aligned?
Can you please send us supout.rif files from both sides to support@mikrotik.com ?
by antonsb
Fri Oct 12, 2018 12:38 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

66000 GHz is non standard freq for this band? Will You implement 66960 GHz and 69120 GHz?
it's not a standard channel
by antonsb
Thu Oct 11, 2018 1:58 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192027

Re: LHG 60G experience

typo of 66GHz

Much higher distances are available by using 64800 and 66000 MHz frequencies
by antonsb
Fri Oct 05, 2018 5:14 pm
Forum: Wireless Networking
Topic: IPQ4019 chipsets - random capacity loss
Replies: 8
Views: 3349

Re: IPQ4019 chipsets - random capacity loss

please provide us more detailed info and send a support output file to support@mikrotik.com What wireless protocol you are using? How are you testing the speed/capacity? How often do you see this problem? I am using 802.11 speed/capacity - just looking on winbox and pinging other side. MKs are link...
by antonsb
Fri Oct 05, 2018 4:13 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93128

Re: wAP 60G experience

All 60GHz devices in AP mode currently supports up to 8 clients.
by antonsb
Fri Oct 05, 2018 4:05 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 169148

Re: v6.44beta [testing] is released!


*) wireless - improved stability for 802.11ac;
Any description of improve? Thanks
This fix should provide better rate selection at higher rates and at higher load.
by antonsb
Fri Oct 05, 2018 4:01 pm
Forum: Wireless Networking
Topic: W60G tx-power setting gone in latest firmware
Replies: 8
Views: 4478

Re: W60G tx-power setting gone in latest firmware

Can we get access for this link or similar with such issue to run some tests and debug?
Please write to support@mikrotik.com
  • 1
  • 2