Community discussions

MikroTik App

Search found 8 matches

by davzar
Fri Nov 09, 2018 11:54 am
Forum: General
Topic: Switch Chip on CRS106-1C-5S
Replies: 19
Views: 2477

Re: Switch Chip on CRS106-1C-5S

I think that the problem could be that you've added switch-cpu in both VLAN: you should use it only on management VLAN.
Give it a try
by davzar
Thu Nov 08, 2018 1:46 pm
Forum: General
Topic: CRS212-1G-10S and VLAN
Replies: 5
Views: 909

Re: CRS212-1G-10S and VLAN

A little update:
i've tried the configuration above in a test environment in my lab
and it works, i can achive wire-speed with CPU that stays always under 20% while pushing traffic.
by davzar
Wed Nov 07, 2018 6:34 pm
Forum: General
Topic: Split PPPoE users on two servers
Replies: 0
Views: 368

Split PPPoE users on two servers

Hi everybody, i've a little question. I have a CCR1036 that collects VPLS tunnels, and send pppoe requests via VLANs to two pppoe servers It actually works fine. I would like to set it in this way, one server for collecting pppoe-clients with private subnets, and the other server for pppoe-clients w...
by davzar
Wed Nov 07, 2018 12:22 pm
Forum: General
Topic: CRS212-1G-10S and VLAN
Replies: 5
Views: 909

Re: CRS212-1G-10S and VLAN

Hi everyone, following mkx advices i've made this configuration, is that correct? /interface bridge add fast-forward=no name=bridge1 protocol-mode=none /interface ethernet set [ find default-name=ether1 ] speed=100Mbps set [ find default-name=sfp1 ] advertise=\ 10M-half,10M-full,100M-half,100M-full,...
by davzar
Tue Nov 06, 2018 11:51 am
Forum: General
Topic: CRS212-1G-10S and VLAN
Replies: 5
Views: 909

Re: CRS212-1G-10S and VLAN

You should use single bridge. If you want to have wire-speed data transfers without CRS' CPU burning out (e.g. to do it in switch chip rather than in software), then stick to /interface ethernet switch section when configuring it. This is a post-6.41 type of configuration despites some users around...
by davzar
Sat Nov 03, 2018 11:37 am
Forum: General
Topic: CRS212-1G-10S and VLAN
Replies: 5
Views: 909

CRS212-1G-10S and VLAN

Hi to all, i need to configure my CRS212 with this VLANs scenario: VLAN100 members sfp1,sfp2,sfp3 sfp1 tagged sfp2,sfp3 untagged VLAN110 members sfp1,sfp4 sfp1 tagged sfp4 untagged VLAN200 members sfp5,sfp6 sfp5 tagged sfp6 untagged VLAN210 members sfp5,sfp7 sfp5 tagged sfp6 untagged. This configura...
by davzar
Wed Sep 19, 2018 12:37 pm
Forum: General
Topic: RouterOS making unaccounted outbound winbox connections [SOLVED]
Replies: 65
Views: 54018

Re: RouterOS making unaccounted outbound winbox connections [SOLVED]

Another important check is:

check if you have static entrien on IP/DNS/Static

i found DNS A Record and CNAME to fake mikrotik download site

maybe for download an altered version of routeros
by davzar
Thu Sep 01, 2016 12:24 pm
Forum: Forwarding Protocols
Topic: MPLS/VPLS hang
Replies: 2
Views: 948

MPLS/VPLS hang

Hi everybody, i've a strange and annoying problem: we have one CCR1036, with ROS 6.36, that is connected with other routers (CCR1009, RB3011, RB2011 and so on), with OSPF routing. Customers pppoe is carried with BGP signalled VPLS with MPLS, every router has its proper loopback intefaces and its own...