Hello, it is the status of IPv6 available in SNMP? I look through the MIB files but do not find any relevant OID /ipv6/settings> print disable-ipv6: yes forward: yes accept-redirects: yes-if-forwarding-disabled accept-router-advertisements: yes-if-forwarding-disabled I am interested in disable-ipv6 ...

Hi, where is possible to get the antenna diagrams for wireless products? On some devices is possible to download *.ant file but not on every product. I need exact specifications if we plan bigger systems. Thanks.

OK thanks so solution is add every connected sub net as accept rule (you don't need combinations) 8 ;;; LB - connected subnets chain=prerouting action=accept dst-address=192.168.50.0/24 log=yes log-prefix="" 9 ;;; LB - connected subnets chain=prerouting action=accept dst-address=192.168.70...

Hi, I try create PPC load balancing but I got multiple subnets at a local network and I'm unable to get it to work. For example, if PC 192.168.150.30 try to ping the 192.168.50.5 the connection gets to mark by PPC to_starnet/to_videon and it's routed out. ISP1 starnet : 10.27.104.234/30 ISP2 videon:...

Hi guys, thanks for the help. I decided to move the secondary router to a separate VLAN. Now it works but I got another question, how mark the packet on the main router to preserve as much resource as possible? Because if I run the speediest over the VPN it killing the main router (100% CPU usage) m...

Hi, I got the setup. 192.168.150.1/24 <- main router 192.168.150.251/24 <- secondary router (secondary gateway) all devices in 150.0/24 got 150.1 as a gateway, at this gateway is a mangle rule to route some traffic specific traffic (for example all traffic from 192.168.150.60) out through secondary ...

Hi, in the last days I discover my usage of Mikrotik VLANS was really bad. Now I study whole VLANs again and experimenting with different settings. Could somebody confirm if this setup is ok? My problem: I want to send VLAN20 and VLAN30 to two different ethernet ports. So I created 4 interfaces, 2 f...

Hi, I probably found a bug in CAPsMAN. I got this setup NVR (100.10 ) --MAIN ROUTER ---> VLAN 100 ---> SECONDARY ROUTER ---> IP CAM 100.16 and IP CAM 100.17 at ether2 and ether5 but if I log to the main router the traffic to IP CAM looks like it goes through the CAPsMAN interface. It is normal? The ...

Thanks so my best option is search by comment. Not the most elegant way how to do it but it probably will works.

Hi, it is possible to find items by .id? I'm unable to get any results. Example: [admin@FireHouse] /ip ipsec peer> print detail where .id=1 Flags: X - disabled, D - dynamic, R - responder but there is a peer with number 1. or how you target specific rules/peer/policy etc with script? I need to check...

Hi, thanks. I will have to tune priorities. It all works with basic RSTP but on dude, I notice some pings timeouts on one switch in the network. It looks like this switch changing root bridge randomly.

Hi, I got quite big network 5 switch in circle topology. How it is the right way to create circle bridge with redundancy. ( If one switch die I need route path from the opposite direction ) all switches are in one big bridge all is one big network. Just point me to the right technology. Thanks.

Hi , it is possible to setup for example to send just one email notification in 10 minutes ? Because If some core switch dies it send notification for every device what is connected to that. Thanks a lot

bumb, no answer ? Any official support ?

Hi, it is possible to keep Dude pooling device, but do not propagete error notification ? For example I got device what is periodicaly turned off, so my dude is "red" (pooling timeout), but it is normal state for me. But I want to keep pooling if device is on. Thanks .

Hi guys, I got a strange problem every day about 15:20:00 (+- 10seconds ) I got the same error in my main router. 192.168.50.1 - main router sep/20/2018 15:22:54 system,error,critical login failure for user admin from 192.168.150.250 via dude sep/21/2018 15:22:58 system,error,critical login failure ...

Hi, I want make some logic in labels in the Dude but if I enter this code It is just "part evaluated" .. Variables are replaced by values but if is not evaluated .. Please help .. Or post some examples of functions in label .. Thanks

Ok. so there is no automated way how remove duplicity in config ( one in pool and one in address list ) so If that IP changes I will have to change it at two places.

Hi, It is possible to make something as dynamic filter rule ? I get gateway from dhcp-client, I want create rule what will be block all communication exept communication to gateway.. If gateway change by DHCP client this rule should reflect it. Thanks for info.

Hi , it is possible to use pool (ip/pool) as condition in filter ? I want add rule to all VPN users whats get IP from pool.

Thanks

Hi, what is difference between Firewall accept rule and NAT accept ?

Hi, guys, I got the big problem with my PPTP VPN, I use it to connect to my local server. But if I run RDP it randomly disconnects for 10-20sec. I run ping on VPN gateway and local server simultaneously. Pings on VPN gateway with no packet loss, but on the local server, it randomly drops 3-4 packets...

Hi guy, I want create server what will have no access to Internet and will be accessible trought L2TP/IPSec. I create seperate network for it. 192.168.66.0/24 Server IP 192.168.66.100 GW 192.168.66.1 Separate network bridge IP: 192.168.66.1 Server is connected to MK via. port eth4 So what I did. /ip...

Hi, thanks for response but do not help.. I try It now, import cert. to local computer storage but still same error.

Hi, I'm in dead end. I got MK with L2TP/IPSec VPN with rsa authorization .. It works fine with Android device. Bud I'm unable connect with Windows client. https://i.imgur.com/vd0irGt.png 1) I downloaded cert CA and User 2) merge it with openssl 3) import it. But it not works, on android I can select...

Thanks a lot. I have so much to learn. Your solution is much cleaner.

Hi, I was looking for a solution how to make easy hairpin without the need to make a rule for every NAT, or specify public IP in every NAT. It looks it works. Could please some one check it? Do you see some problem with this config? 1) I make mangle rule to mark hairpin packets (193.165.xxx.xxx is m...

Hi , I created PPTP tunel for two office branch ( MK - MK ) tunel is ok. Routing from MKs is ok, and ping works from booth sides .. But if I want ping from PC1 ( Office 1 ( 192.168.88.0/24 )) to PC2 Office 2 (192.168.1.0/24 ) I have to manualy add route (route add 192.168.1.0 MASK 255.255.255.0 192....