Community discussions

Search found 12 matches

by gipfelgoas
Mon Nov 28, 2016 6:37 pm
Forum: General
Topic: routerOS automatic update
Replies: 0
Views: 356

routerOS automatic update

Hi, I have set up one router as main CAPsMAN (RB3011) and 10 other as CAPs (all wAP). now is there a possibility to update one and all the other will update automatically?? I know about CAPsMAN > Remote CAP > Upgrade but with this solution I need to download and copy manually the file to the main ro...
by gipfelgoas
Sat Oct 15, 2016 10:38 am
Forum: General
Topic: L2TP+IPSec with LAN Access
Replies: 10
Views: 3882

Re: L2TP+IPSec with LAN Access

You don't need second masquerade rule. Do you accept on client option for create a default route to l2tp server? Remove l2tp interface from bridge(option in ppp profile), change network for l2tp server and client like 192.168.1.0/24(l2tp-pool). Add accept forward filter rule where incoming interfac...
by gipfelgoas
Fri Oct 14, 2016 6:25 pm
Forum: General
Topic: L2TP+IPSec with LAN Access
Replies: 10
Views: 3882

Re: L2TP+IPSec with LAN Access

[admin@router.dh] > export # oct/14/2016 17:17:28 by RouterOS 6.37.1 # /interface l2tp-server add name=l2tp-in1 user=user1 /interface bridge add name=bridge_lan /interface ethernet set [ find default-name=ether2 ] name=sw1-eth2-master set [ find default-name=ether3 ] master-port=sw1-eth2-master nam...
by gipfelgoas
Fri Oct 14, 2016 5:12 pm
Forum: General
Topic: L2TP+IPSec with LAN Access
Replies: 10
Views: 3882

Re: L2TP+IPSec with LAN Access

Rb3011
PPPoE on eth1 (WAN)
Bridge LAN (eth2-10) 192.168.0.0/24 Dhcp server
NAT to eth1
Some firewalls
by gipfelgoas
Thu Oct 13, 2016 6:35 pm
Forum: General
Topic: L2TP+IPSec with LAN Access
Replies: 10
Views: 3882

Re: L2TP+IPSec with LAN Access

You may need to update the L2TP profile you are using (profile=default-encryption in your case) and select the bridge you would like this client to be attached to, based on the below being part of the same network subnet. Example: /ppp profile add bridge=VPN-Bridge comment="Default L2TP Profile" na...
by gipfelgoas
Wed Oct 12, 2016 5:31 pm
Forum: General
Topic: L2TP+IPSec with LAN Access
Replies: 10
Views: 3882

L2TP+IPSec with LAN Access

Hello, I wanted to configure something like this with L2TP+IPsec: http://i.imgur.com/fkeBL4r.png /interface l2tp-server server set enabled=yes ipsec-secret=123 max-mru=1500 max-mtu=1500 mrru=1600 use-ipsec=yes /ppp secret add local-address=192.168.0.1 name=123 password=123 profile=default-encryption...
by gipfelgoas
Sun Oct 09, 2016 11:54 am
Forum: General
Topic: Adding UDP ON OPENVPN
Replies: 3
Views: 1721

Re: Adding UDP ON OPENVPN

Please stop posting multiple times, we see your one topic already. OpenVPN UDP support is implemented in v7, which is currently in private alpha testing. Do you also plan to integrate OpenVPN with cert + key authentification only? (without username + password) as it is used in more and more service...
by gipfelgoas
Wed Sep 14, 2016 9:39 pm
Forum: General
Topic: SOLVED: NAT and internal Webserver access from internal IP with Domainname
Replies: 5
Views: 1504

Re: NAT and internal Webserver access from internal IP with Domainname

got it working. solution for me: [admin@router.dh] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade out-interface=Eolo_eth1 1 chain=srcnat action=masquerade out-interface=bridge_lan 2 chain=srcnat action=masquerade src-address=192.168.0.0/24 dst-...
by gipfelgoas
Wed Sep 14, 2016 2:30 pm
Forum: General
Topic: SOLVED: NAT and internal Webserver access from internal IP with Domainname
Replies: 5
Views: 1504

Re: NAT and internal Webserver access from internal IP with Domainname

Have a look at http://wiki.mikrotik.com/wiki/Hairpin_NAT already tried.... not working (or bad configured) [admin@router.dh] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; Webaccess for Nas chain=dstnat action=dst-nat to-addresses=192.168.0.192 protocol=tcp in-interface...
by gipfelgoas
Tue Sep 13, 2016 9:54 pm
Forum: General
Topic: SOLVED: NAT and internal Webserver access from internal IP with Domainname
Replies: 5
Views: 1504

SOLVED: NAT and internal Webserver access from internal IP with Domainname

Hello, I have my NAS attached to my RB and made nat and forwarding so I can access it from https://home.mydomain.com:4003. Everything works fine. But if I want to access it from my LAN with the domain name (not the internal IP) I got error not reachable.. See image. https://home.danielhinterlechner....
by gipfelgoas
Tue Sep 06, 2016 9:16 am
Forum: Scripting
Topic: Webfig with HTTPS support?
Replies: 22
Views: 16233

Re: Webfig with HTTPS support?

Mmmmh, no problems here since Jears with CaCert.org & ROS current. Just switched to: 6.37rc27 -> https webfig login is fine as ever :D I've generated a .p12 file for import to my Tikl. ~$ openssl pkcs12 -export -inkey mikrotik_example_com.key -in mikrotik_example_com.crt -certfile CAcert.org.crt -o...
by gipfelgoas
Wed Aug 31, 2016 1:13 pm
Forum: Scripting
Topic: Webfig with HTTPS support?
Replies: 22
Views: 16233

Re: Webfig with HTTPS support?

I use:

http://www.selfsignedcertificate.com/

just create the certs .key and .csr, then import it on rOS. After that enable https with this certs

M.
how have you done?

Mine is still not working...