Have on installed at 759m with the past few weeks, very impressed but went down a few times in very heavy rain the other day, no problems with light rain, fog or mist. I do notice that if change frequencies on it the the alignment can move around. Man O Man it took some fiddling around to get it lin...

Check CPU load (per-CPU)

Thanks Chupaka, I have multi-queue-ethernet-default enabled for the interfaces combo1 and ether1-local "mq piffo" 100 packets.

CPU's included in screenshots below

UDP test
https://imgur.com/h84JwYJ
TCP Test
https://imgur.com/4LcP4k1

Firstly thanks to Tom for providing this Service I dunno if you guys can help me out, we have a 360Mb connection here based in Europe. I believe that we are having a few issues on the network where as we don't seem to be able to max out the connection from normal internet use, I am unsure if the iss...

Bump.
Any help or advice here would be appreciated thanks.

Hi have CCR1009-7G-1C here, installed since last FEB WAN ether1, ether 3,4,5,6,7 are in Bridge. ether2 is redundant, however the logs show that ether2 is auto negotiating. It seems to happen at sporadic times for 20-30 mins or so, then it calms down again for a few hours. I have check the physical p...

This is how I achieved it.

https://ibb.co/h6RPW5

HI we area a small community wisp and have Ubiquiti radios and a Mikrotik RB1100 managing our network, all our clients get a static IP address on the Ubiquiti radio and we would like to implement a daily quota on our system as we have the few that go customers that go completely over the top. To use...

That didn't work for me, i found that the below did.

:global macaddy [get [find address=172.16.1.11] mac-address]]
:put $macaddy