Community discussions

Search found 549 matches

  • 1
  • 2
by maximan
Thu May 30, 2019 4:45 pm
Forum: Scripting
Topic: Script NTOP to stop DDOS
Replies: 4
Views: 898

Re: Script NTOP to stop DDOS

Does anyone have a good walk through on how to get fast net Mon working? Hello You have a quick start to using Fastnetmon Advanced (my advice is use this version) at https://fastnetmon.com/advanced-install-guide/ You can use a trial license to test it. Also, you can use our panel FNM Manager to con...
by maximan
Fri Jul 27, 2018 8:41 pm
Forum: General
Topic: Tools for checking RouterOS vulnerability
Replies: 0
Views: 1933

Tools for checking RouterOS vulnerability

We have a tool to check if your RouterOS is vulnerable. It will not show sensible information which could be used for bad purposes. https://checkmyrouter.mkesolutions.net/ Remember: 1. Use Input Firewall on all interfaces: https://wiki.mikrotik.com/wiki/Manual:Securing_Your_Router 2. Upgrade RouterO...
by maximan
Wed Jan 31, 2018 4:33 pm
Forum: General
Topic: Block/limit youtube
Replies: 13
Views: 7741

Re: Block/limit youtube

Google (Youtube) uses QUIC protocol not TCP.
"tls-host" is only to tcp applicable
Is true if you use Chrome (or Opera 16), if not, use TLS.

M.
by maximan
Tue Jan 30, 2018 6:27 pm
Forum: Wireless Networking
Topic: NV2 Qos Frame Priority
Replies: 4
Views: 804

Re: NV2 Qos Frame Priority

Check again. It's fixed the mapping.

M.
by maximan
Wed Jan 24, 2018 6:20 pm
Forum: Wireless Networking
Topic: NV2 Qos Frame Priority
Replies: 4
Views: 804

Re: NV2 Qos Frame Priority

From wiki:

https://wiki.mikrotik.com/wiki/Manual:N ... v2_network
priority 0 -> queue 0
priority 1 -> queue 1
priority 2 -> queue 2
priority 3 -> queue 3
priority 4 -> queue 4
priority 5 -> queue 5
priority 6 -> queue 6
priority 7 -> queue 7

M.
by maximan
Mon Jan 22, 2018 6:37 pm
Forum: General
Topic: FastNetMon - DDoS detection tool compatible with Mikrotik
Replies: 6
Views: 1309

Re: FastNetMon - DDoS detection tool compatible with Mikrotik

Thanks Pavel for your contribution!

M.
by maximan
Thu May 11, 2017 7:34 pm
Forum: Beginner Basics
Topic: How to Read Router backup File (.backup)
Replies: 5
Views: 21105

Re: How to Read Router backup File (.backup)

Hi

Import the .backup on temp router (like chr) and them export the config that you need.

Regards

M.
by maximan
Mon May 08, 2017 11:38 pm
Forum: RouterBOARD hardware
Topic: MAC address table size
Replies: 4
Views: 1983

Re: MAC address table size

Hello

are you talking about
 /ip settings> set max-neighbor-entries=
.

from wiki:

max-neighbor-entries (integer [0..4294967295]; Default: ) Maximum number of allowed neighbors in ARP table.


Regards.

M.
by maximan
Mon May 08, 2017 7:10 pm
Forum: General
Topic: Features Request: SYNPROXY
Replies: 2
Views: 1041

Re: Features Request: SYNPROXY

You can use FastNetMon for DDoS Sync attack. It has support for rOS.

https://github.com/pavel-odintsov/fastnetmon

M.
by maximan
Thu Apr 20, 2017 7:22 pm
Forum: General
Topic: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)
Replies: 183
Views: 79880

Re: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)

Hello to all I release 2 project at GitHub: https://github.com/elmaxid/ips-mikrotik-suricata : Module to connect Suricata / Barnyard2 to MikroTik for IPS on an eventual alert ** Features * Detect an Alert from Suricata and connect to RouterOS to block de Attack source IP Address * Notification: * Em...
by maximan
Mon Mar 27, 2017 10:26 pm
Forum: General
Topic: Maltrail + Mikrotik (IDS)
Replies: 10
Views: 2303

Re: Maltrail + Mikrotik (IDS)

Hello I use it creating a dummy interface and replay the tzsp traffic to it with tcpreplay. modprobe dummy ip link set name eth10 dev dummy0 ifconfig eth10 192.168.42.42 trafr -s | tcpreplay --topspeed -i eth10 - python sensor.py python server.py and chan chan chan chan....you can use maltrail using...
by maximan
Fri Mar 03, 2017 6:05 pm
Forum: General
Topic: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)
Replies: 183
Views: 79880

Re: Suricata IDS/IPS integration with Mikrotik

If you are using phpMyAdmin to define the trigger, you can't do it in an SQL window. Go to the "Triggers" tab on the iphdr table and add the new trigger. addtrigger.png Otherwise just put the code in a file and execute it from the command line: mysql -u username -p database_name < trigger_code.sql ...
by maximan
Fri Mar 03, 2017 5:43 pm
Forum: General
Topic: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)
Replies: 183
Views: 79880

Re: Suricata IDS/IPS integration with Mikrotik

Hello. Well, I update the manual on GIT. The new release support Telegram and Mail report. I commented on it, you need Snorby installed to work ( the script) , because i use the schema DB. Looks good. There are a couple of reasons I don't clean out the block_queue table: I do some analytics to see w...
by maximan
Thu Feb 02, 2017 8:38 pm
Forum: General
Topic: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)
Replies: 183
Views: 79880

Re: Suricata IDS/IPS integration with Mikrotik

Hello


Well, after working a few days, I used your post like base, to make this project

https://github.com/elmaxid/ips-mikrotik-suricata

Tell me if you have some suggestions

Regards

M.
by maximan
Tue Jan 31, 2017 5:36 pm
Forum: General
Topic: Suricata IDS/IPS integration with Mikrotik (now with OSSEC)
Replies: 183
Views: 79880

Re: Suricata IDS/IPS integration with Mikrotik

Hello Thanks for your sharing. I'm try to implement this one but when i try to create trigger I have this issue: Error in query (1064): Syntax error near '' at line 3 Error in query (1064): Syntax error near 'DECLARE this_event_signature INT(10) default 0' at line 1 I try to fix it, but i can't. Can...
by maximan
Fri Nov 18, 2016 6:19 pm
Forum: Scripting
Topic: Mikrotik backup tool
Replies: 5
Views: 1311

Re: Mikrotik backup tool

Nice work.
This projects could helps you to improve your script

https://github.com/DmitriyLyalyuev/mikr ... /backup.sh
https://github.com/1sw/Mikrotik-autobac ... hbackup.sh

Regards

M.
by maximan
Mon Aug 22, 2016 4:47 pm
Forum: Wireless Networking
Topic: Wireless QoS Prioritization
Replies: 2
Views: 1120

Re: Wireless QoS Prioritization

Hi
Just use QOS (priority) with Nv2:

check the priorities on:

http://mum.mikrotik.com/presentations/IN12/soumil.pdf
http://wiki.mikrotik.com/wiki/Manual:Nv2

M.
by maximan
Mon Aug 22, 2016 4:40 pm
Forum: Scripting
Topic: Webfig with HTTPS support?
Replies: 22
Views: 16269

Re: Webfig with HTTPS support?

I use:

http://www.selfsignedcertificate.com/

just create the certs .key and .csr, then import it on rOS. After that enable https with this certs

M.
by maximan
Mon Feb 01, 2016 8:31 pm
Forum: Wireless Networking
Topic: icons snooper
Replies: 2
Views: 1051

Re: icons snooper

Frecuency
AP
Client
by maximan
Mon Feb 01, 2016 8:22 pm
Forum: Scripting
Topic: design a Winbox!
Replies: 6
Views: 1603

Re: design a Winbox!

by maximan
Tue Nov 17, 2015 4:38 pm
Forum: General
Topic: CapsMan AP limit [ANSWER: unlimited]
Replies: 8
Views: 2692

Re: CapsMan AP limit

EDIT: my fault for read fast. 32 for vAp and Radio. NOT AP.
by maximan
Fri Nov 13, 2015 4:40 pm
Forum: General
Topic: CapsMan AP limit [ANSWER: unlimited]
Replies: 8
Views: 2692

Re: CapsMan AP limit

CapsMan has this limitations:

32 Radios per CAP
32 Virtual interfaces per master radio interface

More info: http://wiki.mikrotik.com/wiki/Manual:CAPsMAN
by maximan
Mon Oct 19, 2015 7:42 pm
Forum: Announcements
Topic: MUM España LIVE VIDEO
Replies: 5
Views: 3843

Re: MUM España LIVE VIDEO

You can watch the videos on youtube. The presentation will be there on wiki.

M.
by maximan
Mon Jul 13, 2015 5:59 pm
Forum: General
Topic: Burst working example
Replies: 1
Views: 878

Re: Burst working example

by maximan
Mon Jun 08, 2015 5:05 pm
Forum: General
Topic: How Remove Calea Compele?????
Replies: 5
Views: 850

Re: How Remove Calea Compele?????

Hi
you must to do
system > package > calea then click on uninstall. To apply reboot the router.
by maximan
Wed Mar 11, 2015 8:16 pm
Forum: General
Topic: Calculating Bursts
Replies: 6
Views: 1728

Re: Calculating Bursts

excelent tool!. Is there source code available ?

M.
by maximan
Fri Feb 13, 2015 5:30 pm
Forum: Wireless Networking
Topic: Wireless TX/TX frames VS tx/rx Hardware Frames
Replies: 4
Views: 2654

Re: Wireless TX/TX frames VS tx/rx Hardware Frames

there aren't relation with HW Frames and reduce signal for extra pay.
You can use a radius to do accounting for your customers

M.
by maximan
Thu Feb 12, 2015 3:56 pm
Forum: Wireless Networking
Topic: Wireless TX/TX frames VS tx/rx Hardware Frames
Replies: 4
Views: 2654

Re: Wireless TX/TX frames VS tx/rx Hardware Frames

Hi

HW Frame: how many packets must to send in theory
Frame: How many packets are used to send the info in real life

the relation with this two values is CCQ

EX: you must to send 2 packet with info but are used 4 packet in real life (you have interference) so the ccq is 50%

HTH

M.
by maximan
Wed Jan 28, 2015 5:28 pm
Forum: General
Topic: IPSec between two CCR1036 poor performance
Replies: 17
Views: 3386

Re: IPSec between two CCR1036 poor performance

which encryption are you using? Are you using AES?
give more info
M.
by maximan
Fri Dec 26, 2014 4:28 pm
Forum: Wireless Networking
Topic: Apple wifi issues: data from unknown device, sent deauth
Replies: 13
Views: 6121

Re: Apple wifi issues: data from unknown device, sent deauth

are you using aes or tkip? what is the group update key?

check at the final of this topic

http://forum.mikrotik.com/viewtopic.php ... 0&start=50

M.
by maximan
Mon Dec 08, 2014 6:51 pm
Forum: General
Topic: SQL Abuse Report form ISP
Replies: 1
Views: 712

Re: SQL Abuse Report form ISP

by maximan
Fri Oct 24, 2014 11:24 pm
Forum: Wireless Networking
Topic: Interesting wireless links
Replies: 11
Views: 5695

Re: Interesting wireless links

This is another interesting implementation

Wifi Repeater GoPro on Kart Racing

http://forum.mikrotik.com/viewtopic.php ... 44&start=0
by maximan
Thu Oct 16, 2014 4:59 pm
Forum: General
Topic: Feature Request: EAP-TTLS/EAP-PEAP
Replies: 15
Views: 6344

Re: Feature Request: EAP-TTLS/EAP-PEAP

only EAP-TLS without radius

M.
by maximan
Fri Oct 10, 2014 5:25 pm
Forum: General
Topic: Feature Request: EAP-TTLS/EAP-PEAP
Replies: 15
Views: 6344

Re: Feature Request: EAP-TTLS/EAP-PEAP

RouterOS support a lot of type EAP with Radius. Only EAP-TLS is native on OS, the another can be used with external radius

M
by maximan
Mon Sep 01, 2014 7:15 pm
Forum: General
Topic: Certificate Creation for OpenVPN
Replies: 4
Views: 1066

Re: Certificate Creation for OpenVPN

grate!!!

remember, you can give me karma if the tip helps you. ;)

M.
by maximan
Mon Aug 25, 2014 5:50 pm
Forum: Beginner Basics
Topic: How to transfer files in winbox wine under OSX
Replies: 1
Views: 1216

Re: How to transfer files in winbox wine under OSX

you can't drag 'n drop with the combination of wine and winbox. You can copy the file with sftp or ftp. If you have webfig access, you can download from it.

FYI: With windows virtualized on parallels you can use drag'n drop

Regards
M.
by maximan
Wed Aug 20, 2014 5:47 pm
Forum: Beginner Basics
Topic: mikrotik-6.18.iso : Loading system 01
Replies: 3
Views: 1792

Re: mikrotik-6.18.iso : Loading system 01

ok....
i know there are some problem with SATA cd-rom. I use IDE when i need use cd-rom if not I use USB boot image

M.
by maximan
Wed Aug 20, 2014 5:30 pm
Forum: Beginner Basics
Topic: mikrotik-6.18.iso : Loading system 01
Replies: 3
Views: 1792

Re: mikrotik-6.18.iso : Loading system 01

are you using IDE or SATA CD-rom?

M.
by maximan
Wed Aug 20, 2014 5:29 pm
Forum: General
Topic: Certificate Creation for OpenVPN
Replies: 4
Views: 1066

Re: Certificate Creation for OpenVPN

I recommend to you use this for quickly creating certificates:

http://www.selfsignedcertificate.com/

Then you can import it to rOS and use it on OpenVPN

HTH

M.
by maximan
Fri Aug 01, 2014 10:00 pm
Forum: Scripting
Topic: how to create .npk file
Replies: 6
Views: 9337

Re: how to create .npk file

You can check this:

http://routing.explode.gr/node/96


M.
by maximan
Tue May 13, 2014 3:14 pm
Forum: General
Topic: Auto login to hotspot when assign dhcp ???
Replies: 3
Views: 1534

Re: Auto login to hotspot when assign dhcp ???

add the mac address like user on hotspot users.

i guess, another thing is make a script to add the IP OR MAC on hotspot users via script when the IP address is leased

M.
by maximan
Wed May 07, 2014 5:32 pm
Forum: Scripting
Topic: Looking Glass
Replies: 8
Views: 3046

Re: Looking Glass

Nice work!!

I will use it. Nice source code, clean & simple (KISS). I like it!

I give your karma

M.
by maximan
Mon Jan 20, 2014 10:48 pm
Forum: Beginner Basics
Topic: Flash 90~100% CPU
Replies: 8
Views: 2437

Re: Flash 90~100% CPU

i had the same issue and the mikrotik's support recomend me to upgrade to v6.7 and it will fix. I don't try yet because the router can be reboot. You can try it.
M.
by maximan
Mon Jan 20, 2014 10:33 pm
Forum: Beginner Basics
Topic: router name
Replies: 4
Views: 1441

Re: router name

just change the static dns entry on
ip > dns > static
to the name that you want.
M.
by maximan
Tue Jan 14, 2014 5:32 pm
Forum: General
Topic: Winbox crashing / disappearing after 24-48 hrs?
Replies: 1
Views: 844

Re: Winbox crashing / disappearing after 24-48 hrs?

try with webfig to check long time the rOS.
M.
by maximan
Tue Dec 03, 2013 1:07 am
Forum: General
Topic: Mikrotik Partial Backup Procedure.
Replies: 3
Views: 1049

Re: Mikrotik Partial Backup Procedure.

You can use export command to do this
M.
by maximan
Thu Sep 05, 2013 8:42 pm
Forum: General
Topic: after upgrade to 6.3 cannot generate certificate-request
Replies: 33
Views: 26526

Re: after upgrade to 6.3 cannot generate certificate-request

is true! i have the same issue:

on 6.3:
[admin@MikroTik] /certificate> create-certificate-request 
template: 
Script Error: action cancelled
on 6.1
 /certificate> create-certificate-request 
key-passphrase: 
on 6.3 request a template¿?

M
by maximan
Wed Sep 04, 2013 5:33 pm
Forum: General
Topic: CCR BUG: All ports flap simultaneosly with mangle route mark
Replies: 18
Views: 6587

Re: CCR BUG: All ports flap simultaneosly with mangle route

Are you storing the proxy cache in the NAND, a microSD, or an USB disk? Have you tried the latest v6.3?
They are external proxys

M.
by maximan
Tue Sep 03, 2013 6:29 pm
Forum: General
Topic: CCR BUG: All ports flap simultaneosly with mangle route mark
Replies: 18
Views: 6587

Re: CCR BUG: All ports flap simultaneosly with mangle route

Hi. I have the same issue with a CCR1016-12G. I have about 200-300 mbps and suddenly all traffic on all interface is down a few seconds and return normally. I have a Webproxy on ether12 and some APs, servers, routers on anothers ports. I use routing mark to redirect the http traffic to the proxy ser...
by maximan
Wed Aug 28, 2013 6:18 pm
Forum: General
Topic: Feature Request: MTR
Replies: 72
Views: 25350

Re: Feature Request: MTR

ready on v6.3!!

M.
by maximan
Tue Jul 16, 2013 8:04 pm
Forum: The Dude
Topic: Visited websites list.
Replies: 1
Views: 1201

Re: Visited websites list.

with syslog

M:
by maximan
Tue Jul 16, 2013 8:02 pm
Forum: Beginner Basics
Topic: DNS cache has to be protected!!!!
Replies: 1
Views: 884

Re: DNS cache has to be protected!!!!

if you need open it on wan, you can use LIMIT on advanced too

M.
by maximan
Mon Jul 08, 2013 10:49 pm
Forum: Beginner Basics
Topic: RouterOS Console Cheat Sheet
Replies: 5
Views: 3613

Re: RouterOS Console Cheat Sheet

Very nice idea!!!
M.
by maximan
Wed May 29, 2013 9:10 pm
Forum: Beginner Basics
Topic: VLAN prioritization
Replies: 15
Views: 8524

Re: VLAN prioritization

you can use, set priority on action of mangle firewall rules / bridge firewall rules

M.
by maximan
Mon May 06, 2013 5:24 pm
Forum: General
Topic: Burst Time Calculation
Replies: 3
Views: 910

Re: Burst Time Calculation

It's in article section:

http://www.ip-pro.eu/articles.html

M.
by maximan
Wed Apr 10, 2013 7:11 pm
Forum: General
Topic: Burst Time Calculation
Replies: 3
Views: 910

Re: Burst Time Calculation

by maximan
Wed Mar 06, 2013 3:26 pm
Forum: General
Topic: I did it :(
Replies: 4
Views: 1014

Re: I did it :(

you can access via mac-telnet and remove the rule

M.
by maximan
Mon Feb 25, 2013 7:01 pm
Forum: General
Topic: RouterOS v6rc11
Replies: 115
Views: 36470

Re: RouterOS v6rc11

I have 4 CCR 6RC11 the core VRF with no problems.

What you guys been experiencing problems?
Are you using OSPF with VRF ?

M.
by maximan
Mon Feb 18, 2013 7:09 pm
Forum: General
Topic: When Open VPN with UDP support and compression comes
Replies: 2
Views: 1731

Re: When Open VPN with UDP support and compression comes

this topic was discussed a lot of time.

read this

http://forum.mikrotik.com/viewtopic.php?f=2&t=46133

M.
by maximan
Mon Feb 18, 2013 7:04 pm
Forum: General
Topic: set minimum bandwidth and maximum bandwidth for the client
Replies: 4
Views: 1386

Re: set minimum bandwidth and maximum bandwidth for the clie

Read about LIMIT-AT and MAX-LIMIT. Another issue is PCQ

M.
by maximan
Wed Feb 06, 2013 8:16 pm
Forum: General
Topic: Dynaic Simple Queues before Static?
Replies: 1
Views: 363

Re: Dynaic Simple Queues before Static?

you can do it with script

M.
by maximan
Tue Feb 05, 2013 4:46 pm
Forum: General
Topic: v6.0rc8 not work OpenVPN
Replies: 3
Views: 1374

Re: v6.0rc8 not work OpenVPN

rc8 has problem with certificates, try rc8 or back to rc7
M.
by maximan
Tue Jan 29, 2013 6:38 pm
Forum: General
Topic: Prevent accidental deletion.
Replies: 32
Views: 4411

Re: Prevent accidental deletion.

We can also make something like this -

1. click any rule or item
2. click "lock" icon
3. removing of rule now impossible, shows "item locked"
4. click "unlock" to modify this item

Is anybody else interested in such functionality?
lock.jpg
Nice +1

M
by maximan
Tue Jan 15, 2013 6:02 pm
Forum: Wireless Networking
Topic: EXTREME WiFi Testing..... What have you done?
Replies: 5
Views: 1969

Re: EXTREME WiFi Testing..... What have you done?

Normis:

Where is the presentation of airplane implementation ?, i can't find it on wiki.

M.
by maximan
Tue Dec 04, 2012 1:42 am
Forum: General
Topic: problem with RB 751u-2Hnd
Replies: 2
Views: 609

Re: problem with RB 751u-2Hnd

try to access on port 2 to 5.
Or just push reset button (when you power on) to clean the config and back to default config

M.
by maximan
Tue Dec 04, 2012 1:38 am
Forum: General
Topic: Pass webfig username and password
Replies: 1
Views: 1302

Re: Pass webfig username and password

You can do it. Just set the user admin without password.

M.
by maximan
Mon Nov 05, 2012 6:32 pm
Forum: General
Topic: Web proxy (SQUID) - change Via or X-forwarded-for header
Replies: 2
Views: 1405

Re: Web proxy (SQUID) - change Via or X-forwarded-for header

You can't modify this option on mikrotik's proxy
M.
by maximan
Tue Oct 23, 2012 8:43 pm
Forum: General
Topic: Recommended hardware
Replies: 2
Views: 613

Re: Recommended hardware

try to use BCP

M.
by maximan
Fri Sep 07, 2012 6:44 pm
Forum: General
Topic: MagicPacket (WOL) from Internet not working
Replies: 3
Views: 1520

Re: MagicPacket (WOL) from Internet not working

I guess you must to use EoIP or BCP to make Wol over internet.

M.
by maximan
Tue Feb 14, 2012 4:56 pm
Forum: Forwarding Protocols
Topic: VPN Tunnels with DNS Resolve
Replies: 1
Views: 759

Re: VPN Tunnels with DNS Resolve

IPSec use hostname FQDN...
M.
by maximan
Mon Feb 06, 2012 3:56 pm
Forum: General
Topic: Register 5.12 to Level 1 for testing purpose before purchase
Replies: 2
Views: 717

Re: Register 5.12 to Level 1 for testing purpose before purc

create account on www.mikrotik.com and then you can login and take a demo key

M.
by maximan
Tue Jan 31, 2012 8:15 pm
Forum: Scripting
Topic: Regex to validate SOFT-ID
Replies: 0
Views: 598

Regex to validate SOFT-ID

Hi. I'm writing an aplication and some work of this tool is validate the new format of SOFT-ID . So i write the regex to do it, the expression is: ^[A-Z0-9]{4}-[A-Z0-9]{4}$ This matches with the new format (8 digit A1B2-C3D4 format) with numbers or words on 4 digit - 4 digit I share it if you need i...
by maximan
Mon Jan 30, 2012 8:40 pm
Forum: The Dude
Topic: RouterOS + Dude Web Interface problems...
Replies: 33
Views: 23929

Re: RouterOS + Dude Web Interface problems...

the dude works with rOS 4.17 and dude 4.0beta3....if not this combination the web access is not available

(on RB450G and microSD 2GB)

M.
by maximan
Mon Jan 30, 2012 8:18 pm
Forum: General
Topic: https
Replies: 1
Views: 307

Re: https

you can do it....just create or buy the certificates, import it and configure the hotspot for https login.

PS: Search on this forum, this topic was talked
M.
by maximan
Mon Nov 28, 2011 11:44 pm
Forum: General
Topic: Feature Request: Ability to change port in TELNET/SSH client
Replies: 1
Views: 1162

Re: Feature Request: Ability to change port in TELNET/SSH cl

you can do it with terminal

> /system telnet 
port  routing-table  address

M.
by maximan
Mon Nov 28, 2011 11:36 pm
Forum: General
Topic: Problem with HTTPS
Replies: 2
Views: 546

Re: Problem with HTTPS

Just check the MTU / MSS

M.
by maximan
Sat Oct 29, 2011 2:11 am
Forum: General
Topic: IP address change without control
Replies: 4
Views: 608

Re: IP address change without control

do you have universal client enabled?

M.
by maximan
Mon Oct 17, 2011 6:32 pm
Forum: General
Topic: How do I add PPPoE Sessions to Parent Queue
Replies: 1
Views: 467

Re: How do I add PPPoE Sessions to Parent Queue

you can't do it with simple queue. But you have a workarround using queue tree and address list .

M.
by maximan
Thu Oct 13, 2011 5:08 pm
Forum: Wireless Networking
Topic: CCQ signal competition winner
Replies: 9
Views: 1420

Re: CCQ signal competition winner

this is our best link...

M.
by maximan
Thu Sep 29, 2011 8:40 pm
Forum: Scripting
Topic: [SOLVED] Ping Via API
Replies: 22
Views: 5546

Re: Ping Via API

if it works, give me karma :P

M.
by maximan
Thu Sep 29, 2011 4:24 pm
Forum: Scripting
Topic: [SOLVED] Ping Via API
Replies: 22
Views: 5546

Re: Ping Via API

Just add src-address option
  $API->write('=src-address=192.168.1.1',false);
M.
by maximan
Thu Sep 29, 2011 2:12 am
Forum: Scripting
Topic: [SOLVED] Ping Via API
Replies: 22
Views: 5546

Re: Ping Via API

Try This:
...init and conect ....
$API->write('/ping',false);
$API->write('=address=8.8.8.8',false); 
$API->write('=count=3',false);
$API->write('=interval=1');
$ARRAY4 = $API->read(false);
echo "<pre>". print_r($ARRAY4) ." </pre>";
$API->disconnect();
M.
by maximan
Tue Sep 27, 2011 10:51 pm
Forum: General
Topic: 5.7 sniffer bug?
Replies: 1
Views: 461

Re: 5.7 sniffer bug?

Make supout.rif file and send to support.

M.
by maximan
Tue Aug 23, 2011 6:07 pm
Forum: Beginner Basics
Topic: Can't add ports in ROS 5.5
Replies: 2
Views: 506

Re: Can't add ports in ROS 5.5

Do you have user with full privileges or write policy?

M.
by maximan
Mon Jul 18, 2011 1:08 pm
Forum: The User Manager
Topic: WAN eat alot bandwidth while LAN doesn't eat anything
Replies: 4
Views: 1911

Re: WAN eat alot bandwidth while LAN doesn't eat anything

do you have webproxy enabled?, check the wan with torch
M.
by maximan
Mon Jul 18, 2011 12:21 pm
Forum: General
Topic: Interface
Replies: 1
Views: 479

Re: Interface

upgrade to v5.5 and check again

M.
by maximan
Mon May 16, 2011 7:58 pm
Forum: General
Topic: Winbox + Wine = Black Borders
Replies: 20
Views: 9630

Re: Winbox + Wine = Black Borders

Hello, i'm using Ubuntu 11.04 and for solve my problem I added to the registry of Wine: [HKEY_CURRENT_USER\Software\Wine\X11 Driver] "ClientSideWithRender"="N" Create a file test.reg with this key, and on terminal: regedit test.reg My problem was solved. Thanks!!! This was the solution. I give your...
by maximan
Wed May 11, 2011 5:06 pm
Forum: General
Topic: Winbox + Wine = Black Borders
Replies: 20
Views: 9630

Re: Winbox + Wine = Black Borders

I have the same issue. I install ubuntu 10.10 about 1 month ago and since it I have the black wine. I try to reinstall fonts, configuration of registry, themes and it don't work.

M.
by maximan
Mon Apr 04, 2011 9:53 pm
Forum: General
Topic: Can we customise?
Replies: 2
Views: 390

Re: Can we customise?

just edit webproxy/error.html on the router

M.
by maximan
Wed Mar 16, 2011 8:45 pm
Forum: General
Topic: Installation problem? Loading E....
Replies: 1
Views: 574

Re: Installation problem? Loading E....

is SATA the cd-rom ? change to IDE connector

M.
by maximan
Tue Mar 01, 2011 8:53 pm
Forum: General
Topic: SIP Attack?
Replies: 12
Views: 4700

Re: SIP Attack?

by maximan
Tue Feb 22, 2011 3:33 pm
Forum: General
Topic: How to Get Tranning of mikrotik In Pakistan Karachi
Replies: 4
Views: 967

Re: How to Get Tranning of mikrotik In Pakistan Karachi

you can take some training at

http://www.mikrotik.com/training/?train ... t_training

looking for the nearest
M.
by maximan
Tue Feb 15, 2011 6:44 pm
Forum: General
Topic: Policy-Routing in v4.90
Replies: 5
Views: 481

Re: Policy-Routing in v4.90

the v4.90 doesn't exist

move to: /ip route
M.
by maximan
Tue Feb 15, 2011 6:37 pm
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 12277

Re: v3.X uptime challenge

uptime.jpg
Uptime 5Days

Peer Uptime 352day

is it possible?

M.
by maximan
Tue Feb 01, 2011 6:11 pm
Forum: Scripting
Topic: SIP Attack protection for RouterOS
Replies: 4
Views: 2545

SIP Attack protection for RouterOS

There are a project to make a list of IP that are attacking with bruteforce some PBX SIP. Site: http://infiltrated.net/ Project: http://infiltrated.net/voipabuse/ List: http://www.infiltrated.net/vabl.txt RouterOS Import Format: http://mikrotikexpert.com/sip_attack/ I create an script to import this...
by maximan
Tue Feb 01, 2011 4:47 pm
Forum: General
Topic: router has no software key
Replies: 2
Views: 672

Re: router has no software key

contact to support@mikrotik.com

M.
by maximan
Tue Jan 25, 2011 4:38 pm
Forum: General
Topic: logging visited url with source IP address
Replies: 7
Views: 16389

Re: logging visited url with source IP address

are you masking the request for proxy?

M:
by maximan
Wed Jan 19, 2011 3:49 pm
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 12277

Re: v3.X uptime challenge

not all 3.xx but nice.....

Image
The CPU load is very high.

M.
by maximan
Fri Jan 14, 2011 3:56 pm
Forum: General
Topic: PPTP Logs
Replies: 2
Views: 427

Re: PPTP Logs

7332 Second = Time of connection

The another value are TX / RX bytes and packets

M.
by maximan
Mon Dec 27, 2010 9:16 pm
Forum: General
Topic: RouterOS v5 RC6 hotspot bug
Replies: 2
Views: 1215

Re: RouterOS v5 RC6 hotspot bug

by maximan
Mon Dec 27, 2010 8:57 pm
Forum: Forwarding Protocols
Topic: storage
Replies: 3
Views: 762

Re: storage

If your router is RB450G , you can use a micro-sd for cache on it.


M.
by maximan
Mon Dec 27, 2010 8:54 pm
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 1000

Re: What this "webproxydebug" error means?

Like Normis say, you enabled the logging for webproxy.

Disable it from System > Logging.

M.
by maximan
Mon Oct 04, 2010 6:07 pm
Forum: Beginner Basics
Topic: Winbox on Linux?
Replies: 47
Views: 131361

Re: Winbox on Linux?

If you need to connect to a RouterOS device with the mac address of a microtik from linux without using wine and terminal.exe, you could try a tool I just created:
http://github.com/haakonnessjoen/MAC-Telnet
That look great!. Good Work
M.
by maximan
Fri Oct 01, 2010 7:31 pm
Forum: Scripting
Topic: Using /import with API
Replies: 4
Views: 844

Re: Using /import with API

You can use fetch with auto for autoimport

M.
by maximan
Mon Sep 13, 2010 8:20 pm
Forum: Beginner Basics
Topic: Drivers
Replies: 2
Views: 3882

Re: Drivers

No se pueden subir drivers al RouterOS. La lista de drivers soportados la puedes chequear desde el wiki.

Este foro es en inglés.

EN: You can't upload drivers. You can check the drivers supported at the wiki.

M.
by maximan
Sat Jul 17, 2010 2:20 am
Forum: Scripting
Topic: RouterOS PHP API class
Replies: 37
Views: 9597

Re: RouterOS PHP API class

the source of class has 404 (not found). Where i can find this php class?

M.
by maximan
Thu Jul 15, 2010 3:01 am
Forum: Beginner Basics
Topic: Mikrotik Installing Error
Replies: 7
Views: 1111

Re: Mikrotik Installing Error

are you try with the last version of RouterOS ?

M.
by maximan
Tue Jul 13, 2010 6:10 pm
Forum: Scripting
Topic: Solved Script to recreate the load balance mangle rules
Replies: 12
Views: 17742

Re: Solved Script to recreate the load balance mangle rules

chapex
bro waht picture
are u too small or anttena so big nice one
chapex is gordero

M.
by maximan
Tue Jul 13, 2010 6:09 pm
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 13594

Re: Wireless interface - Slave

export /interface wireless

Yes. I know, it's (S)lave and (R)unning... but i don't know why it's (S)lave :)

Anyway... thanks for trying :)

Regards
M.
by maximan
Thu Jul 08, 2010 9:21 pm
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 13594

Re: Wireless interface - Slave

I guess

R = running
S = Slave

On the screenshot appear "slave" on black letters

M.
by maximan
Thu Jun 24, 2010 7:22 pm
Forum: Scripting
Topic: Email not being sent
Replies: 11
Views: 1749

Re: Email not being sent

I guess you must to enable TLS for use gmail

M.
by maximan
Mon Jun 07, 2010 5:07 pm
Forum: Beginner Basics
Topic: Mikrotik and SATA hard drive
Replies: 1
Views: 527

Re: Mikrotik and SATA hard drive

since v3

M.
by maximan
Fri Jun 04, 2010 9:59 pm
Forum: Beginner Basics
Topic: Old versions od routerOS for RB 200
Replies: 3
Views: 717

Re: Old versions od routerOS for RB 200

use X86 version and reinstall with netinstall if finish the time of upgrade

M.
by maximan
Thu Jun 03, 2010 5:00 pm
Forum: General
Topic: ROS on x86 - Backup Everything (system, config, license)?
Replies: 9
Views: 2683

Re: ROS on x86 - Backup Everything (system, config, license)

You can do backup binary and restore again on the router. But if the HD was formated to install another SO you lose the key.

M.
by maximan
Thu Jun 03, 2010 4:24 pm
Forum: General
Topic: ROS on x86 - Backup Everything (system, config, license)?
Replies: 9
Views: 2683

Re: ROS on x86 - Backup Everything (system, config, license)

You can't backup the license or move to another disk (directly). You must to keep the hd if you don't want lose the license.


M.
by maximan
Wed May 12, 2010 1:47 pm
Forum: Beginner Basics
Topic: blocking specific address from going outside
Replies: 1
Views: 469

Re: blocking specific address from going outside

Sure you can do it, check the firewall on wiki

http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Filter


M.
by maximan
Tue May 11, 2010 7:46 pm
Forum: Beginner Basics
Topic: Firewall issue / HTTPS
Replies: 1
Views: 550

Re: Firewall issue / HTTPS

change the MTU

M.
by maximan
Tue May 11, 2010 7:43 pm
Forum: Wireless Networking
Topic: need a help
Replies: 1
Views: 577

Re: need a help

add more interfaces on vmware

M
by maximan
Tue May 11, 2010 7:40 pm
Forum: General
Topic: Comunidad Mikrotik en Español [SOLVED]
Replies: 8
Views: 15792

Re: Comunidad Mikrotik en Español [SOLVED]

Hay varios foros en español sobre MikrotTIk. Este es oficial y solo en inglés.

There are some forum on spanish. This is oficial and only on english

M.
by maximan
Tue May 11, 2010 7:01 pm
Forum: Beginner Basics
Topic: 'sp' after data rate. What does it mean?
Replies: 4
Views: 908

Re: 'sp' after data rate. What does it mean?

short preambule

M.
by maximan
Tue May 11, 2010 6:55 pm
Forum: Beginner Basics
Topic: wifi setup
Replies: 1
Views: 527

Re: wifi setup

Yes, you can but you will lose gain or damage the card

M.
by maximan
Tue May 11, 2010 6:53 pm
Forum: General
Topic: Question to Forum admin or moderator
Replies: 4
Views: 552

Re: Question to Forum admin or moderator


2. Each time I open the forum in browser, I check tickbox for keep me connected, but still need to log-in again after I closed browser?
Cookies are enabled in browser.
Are you using balanced lines?

M.
by maximan
Tue May 04, 2010 5:18 pm
Forum: General
Topic: version 3.31????????????
Replies: 2
Views: 501

Re: version 3.31????????????

search on this forum, this topic was talked

M.
by maximan
Tue May 04, 2010 5:14 pm
Forum: Beginner Basics
Topic: WEB server
Replies: 1
Views: 572

Re: WEB server

use different ports

M.
by maximan
Tue May 04, 2010 5:14 pm
Forum: General
Topic: "error creating backup file"
Replies: 1
Views: 458

Re: "error creating backup file"

try with export to save the config.


M.
by maximan
Tue May 04, 2010 5:13 pm
Forum: Beginner Basics
Topic: Giving WinBox access to a secondary PC from another network
Replies: 1
Views: 454

Re: Giving WinBox access to a secondary PC from another netw

Use firewall with address list

M.
by maximan
Mon May 03, 2010 9:02 pm
Forum: General
Topic: Moving license to another media
Replies: 1
Views: 407

Re: Moving license to another media

Contact to support support@mikrotik.com

M.
by maximan
Fri Apr 23, 2010 1:46 am
Forum: RouterBOARD hardware
Topic: RB450G microSD card issue
Replies: 4
Views: 3191

Re: RB450G microSD card issue

I have the same issue. I reboot and doesn't appear. I will remove and put again the microSD and try again. I can't do this now because is a remote router.
The micro SD is markvision 8gb

M.
by maximan
Tue Apr 20, 2010 2:39 am
Forum: General
Topic: Winbox comment selection bug?
Replies: 3
Views: 702

Re: Winbox comment selection bug?

in which version? i try the step and all work fine
M.
by maximan
Mon Apr 12, 2010 8:10 pm
Forum: Beginner Basics
Topic: What is the difference between the access and connect lists?
Replies: 3
Views: 4516

Re: What is the difference between the access and connect li

connect list works with station mode
access list works with ap mode

M.
by maximan
Mon Apr 12, 2010 7:31 pm
Forum: General
Topic: pppoe dropping connections
Replies: 2
Views: 663

Re: pppoe dropping connections

check the keep-alive-timeout setting on pppoe

M.
by maximan
Thu Apr 08, 2010 1:01 am
Forum: Scripting
Topic: Solved Script to recreate the load balance mangle rules
Replies: 12
Views: 17742

Re: Solved Script to recreate the load balance mangle rules

Hi
I try to use this script and appear
syntax error (line 49 column 14)
I try to looking for the bug but i can't. Can you check the sintaxis? (i try with v3 and v4)

Regards

M.
by maximan
Tue Apr 06, 2010 9:50 pm
Forum: General
Topic: Queues doesnt see upload traffic (possible bug ?)
Replies: 14
Views: 2210

Re: Queues doesnt see upload traffic (possible bug ?)

is there any rule on queue tree?
M.
by maximan
Wed Mar 31, 2010 7:08 pm
Forum: General
Topic: 5.0beta1
Replies: 10
Views: 1884

Re: 5.0beta1

near of April's fool, just one day ;)
by maximan
Mon Mar 22, 2010 9:02 pm
Forum: The Dude
Topic: Dude for Linux
Replies: 49
Views: 36656

Re: Dude for Linux

use wine

M.
by maximan
Thu Mar 04, 2010 6:28 pm
Forum: General
Topic: Package Combiner
Replies: 2
Views: 448

Re: Package Combiner

you need to download the all-packages on some directory? how the script get the packages?, you have some readme to implement it.
M.
by maximan
Thu Feb 04, 2010 9:53 pm
Forum: General
Topic: New sweet version of MikroTik RouterBOARD 750
Replies: 4
Views: 2945

Re: New sweet version of MikroTik RouterBOARD 750

i want this for me 31. Nice idea
M.
by maximan
Sat Nov 07, 2009 1:08 am
Forum: Beginner Basics
Topic: Inconsistent Counter Filter! :(
Replies: 5
Views: 881

Re: Inconsistent Counter Filter! :(

Rafa búscate un exorcista.

Maybe could be a bug, wait to official answer.
M.
by maximan
Mon Mar 30, 2009 9:45 pm
Forum: General
Topic: /interface ethernet mirror
Replies: 3
Views: 1127

Re: /interface ethernet mirror

You right!... I don't know what is this....maybe port mirroring

M.
by maximan
Mon Mar 30, 2009 9:28 pm
Forum: Beginner Basics
Topic: Attached: Mikrotik Visio Stencils
Replies: 29
Views: 78787

Re: Attached: Mikrotik Visio Stencils

Thanks this is that i'm looking for..

M.
by maximan
Wed Mar 25, 2009 8:23 pm
Forum: General
Topic: /interface ethernet mirror
Replies: 3
Views: 1127

Re: /interface ethernet mirror

by maximan
Wed Mar 18, 2009 2:18 am
Forum: RouterBOARD hardware
Topic: RB616
Replies: 17
Views: 6799

Re: RB616

this is a 16 ethernet port to work like switch or routing (like catalyst)

i hope that!

M.
by maximan
Fri Mar 13, 2009 5:50 pm
Forum: General
Topic: Custom .npk
Replies: 3
Views: 1508

Re: Custom .npk

I guess that Mikrotik doesn't will allow this..


Max
by maximan
Fri Mar 13, 2009 3:49 am
Forum: The Dude
Topic: RouterOS + Dude Web Interface problems...
Replies: 33
Views: 23929

Re: RouterOS + Dude Web Interface problems...

i have the same problem, but we have to wait to the next release. Normis say that they know this issue.

M.
by maximan
Fri Mar 13, 2009 3:47 am
Forum: General
Topic: Blocking VoIP with Content Filtering
Replies: 4
Views: 973

Re: Blocking VoIP with Content Filtering

tell us how you can detect this traffic sip. I mean, layer7 can work with sip pattern but with layer3 (osi) only you can work with IP, so, you know the sipserver?. You must to know to detect this service.
I guess you can use a mix with tarpit and sip connection type suppose.

M.
by maximan
Fri Mar 13, 2009 3:39 am
Forum: General
Topic: LOG all HTTP traffic
Replies: 1
Views: 519

Re: LOG all HTTP traffic

you can use syslog or calea

Max
by maximan
Mon Mar 09, 2009 5:33 pm
Forum: General
Topic: To limite the monthly bandwidth
Replies: 3
Views: 659

Re: To limite the monthly bandwidth

with user manager. Mikrotik is a Router not an accounting or Radius.

Max.
by maximan
Mon Mar 09, 2009 4:49 pm
Forum: General
Topic: Messenger, Facebook (Texas Holdem Poker) Skype problem
Replies: 6
Views: 1453

Re: Messenger, Facebook (Texas Holdem Poker) Skype problem

yes, use policy routing..


M.
by maximan
Mon Mar 09, 2009 4:47 pm
Forum: General
Topic: Does packet sniffer trip QOS/DSCP Values?
Replies: 2
Views: 798

Re: Does packet sniffer trip QOS/DSCP Values?

if the traffic marked with DSCP ?? default is best effort

M
by maximan
Thu Mar 05, 2009 8:06 pm
Forum: General
Topic: RB44GV or RB44G
Replies: 14
Views: 3450

Re: RB44GV or RB44G

when i use rb44gv sometime the pc reboot suddenly. I change it and problem resolved.
Max
by maximan
Mon Feb 23, 2009 7:05 pm
Forum: General
Topic: Phantom "device change" entries in v3.15 log
Replies: 1
Views: 441

Re: Phantom "device change" entries in v3.15 log

some script??

Max
by maximan
Mon Feb 23, 2009 6:58 pm
Forum: General
Topic: Blocking SIP traffic
Replies: 15
Views: 3665

Re: Blocking SIP traffic

you can use l7 and drop the protocol sip

Max
by maximan
Wed Feb 18, 2009 1:49 am
Forum: General
Topic: install RouteOS on DG33BU
Replies: 3
Views: 581

Re: install RouteOS on DG33BU

what was the problem?

M.
by maximan
Mon Feb 16, 2009 9:04 pm
Forum: General
Topic: ipsec vpn between mikrotik 3.0 and juniper ssg350
Replies: 1
Views: 1183

Re: ipsec vpn between mikrotik 3.0 and juniper ssg350

try with 3.20, work for me (IPSEC)

M.
by maximan
Thu Jan 29, 2009 10:01 pm
Forum: General
Topic: Can MT OS serve as VPN Server
Replies: 1
Views: 419

Re: Can MT OS serve as VPN Server

yes, mt can be VPN Server. L2tp,pptp,openvpn,ipsec,etc
check the manual and wiki for examples

M.
by maximan
Mon Jan 26, 2009 11:36 pm
Forum: General
Topic: RE routing P2P
Replies: 9
Views: 1474

Re: RE routing P2P

You can not use layer7 for routing, because you can't re routing an estableshied conection AND layer7 work with flow on estableshied conection.

M.
by maximan
Mon Jan 26, 2009 11:02 pm
Forum: Beginner Basics
Topic: 411 as access point with dhcp
Replies: 1
Views: 714

Re: 411 as access point with dhcp

www.mikrotik.com
wiki.mikrotik.com

there are manuals and examples on this pages

M.
by maximan
Fri Jan 23, 2009 10:21 pm
Forum: Wireless Networking
Topic: an interesting MikroTik based link in Estonia forest
Replies: 5
Views: 1902

Re: an interesting MikroTik based link in Estonia forest

the drawing is genius :D the pigs especially
For some special tattoo

M.
by maximan
Fri Jan 16, 2009 10:29 pm
Forum: General
Topic: Outbound connections
Replies: 1
Views: 413

Re: Outbound connections

Use Firewall. Log all the output chain.
/ip firewall filter add chain=output action=log
Something like this

M.
by maximan
Fri Dec 26, 2008 10:56 pm
Forum: Wireless Networking
Topic: can i change the OS on routerboard ?
Replies: 7
Views: 1691

Re: can i change the OS on routerboard ?

Are you talking about OS or level of license.?
If OS: upgrade via netinstall or another ways
if Level of license. Purchase a new level.

M.
by maximan
Fri Dec 26, 2008 10:55 pm
Forum: Beginner Basics
Topic: What size of Maximum RAM I can use?
Replies: 21
Views: 10734

Re: What size of Maximum RAM I can use?

v2.9 = 1GB
V3 = 2GB

Max
by maximan
Mon Dec 22, 2008 8:54 pm
Forum: Wireless Networking
Topic: interferance reduction
Replies: 20
Views: 2767

Re: interferance reduction

You can't do nothing with interference. Just change the channel or band.

M.
by maximan
Mon Dec 22, 2008 8:53 pm
Forum: General
Topic: RANT - Configuration management: .backup is a joke
Replies: 34
Views: 7000

Re: RANT - Configuration management: .backup is a joke

Would a "/system reset-configuration file=name.rsc" do what you want? It would reset, and then apply the config in the RSC file so that your CPE could connect to the AP for example.
+1, this could be great feature.

M.
by maximan
Thu Dec 18, 2008 8:50 pm
Forum: General
Topic: Winbox: could not get index: missing file!
Replies: 11
Views: 19433

Re: Winbox: could not get index: missing file!

Uncheck load previous and secure mode
M.
by maximan
Sat Dec 13, 2008 1:22 am
Forum: General
Topic: Please Help Me
Replies: 1
Views: 387

Re: Please Help Me

Upgrade to the last version and try again
M.
by maximan
Tue Dec 09, 2008 6:28 pm
Forum: General
Topic: Feature request - Fetch tool
Replies: 2
Views: 1292

Re: Feature request - Fetch tool

this not help you?
/tool fetch
M.
by maximan
Tue Dec 09, 2008 5:05 pm
Forum: General
Topic: howto give all sip and skype traffic high priority ?
Replies: 4
Views: 1177

Re: howto give all sip and skype traffic high priority ?

You can get the list for l7 on the wiki.

M.
http://maxid.com.ar
by maximan
Thu Dec 04, 2008 7:36 pm
Forum: Scripting
Topic: SCP Support
Replies: 4
Views: 1629

Re: SCP Support

Mikrotik support SCP, you can do it externally.
M.
by maximan
Wed Dec 03, 2008 7:59 pm
Forum: Beginner Basics
Topic: Load Balancing (Mikrotik Howto)
Replies: 3
Views: 3229

Re: Load Balancing (Mikrotik Howto)

This example is for v2.9, with 3 value of NTH. On V3 you only have 2 values. You must to change the NTH and the rest is the same.

Max
by maximan
Fri Nov 21, 2008 8:09 pm
Forum: General
Topic: help pls: my system undergo ssh attack
Replies: 3
Views: 912

Re: help pls: my system undergo ssh attack

Check the wiki, there are example for brute force attack on ssh

Max
by maximan
Tue Nov 18, 2008 2:24 am
Forum: General
Topic: Eoip through another Eoip
Replies: 3
Views: 799

Re: Eoip through another Eoip

You can try M3P, this could help you.

Max
by maximan
Tue Nov 18, 2008 2:19 am
Forum: General
Topic: Hanging IPSec connections
Replies: 3
Views: 754

Re: Hanging IPSec connections

I think that there are problem with IPSEC on V3. I use V2.9 when i have to use IPSEC. The SAME config on 2.9 works and v3 not.

Max
by maximan
Wed Oct 22, 2008 10:02 pm
Forum: General
Topic: PPPoE Clients not receiving Gateway
Replies: 5
Views: 806

Re: PPPoE Clients not receiving Gateway

I have the same problem on v3.13, i upgrade to 3.15 and still the problem. I have to make an static gateway.

Max
by maximan
Sat Oct 18, 2008 8:08 pm
Forum: Beginner Basics
Topic: Demo License restrictions?
Replies: 3
Views: 1311

Re: Demo License restrictions?

I guess that there are not limit on demo license, it's only for 24hs.

Max
by maximan
Fri Oct 03, 2008 1:56 am
Forum: General
Topic: Ubuntu and Winbox
Replies: 14
Views: 7542

Re: Ubuntu and Winbox

winbox run fine with wine.

Max
by maximan
Mon Sep 29, 2008 11:17 pm
Forum: General
Topic: IPSEC doesn't work on v3
Replies: 18
Views: 5387

Re: IPSEC doesn't work on v3

I can't send the support file because i change the RB450 to rb532 with 2.9.
I try doing system reset and make the config again, but still with the same problem.
Is there any difference with IPSEC 2.9 with 3.0??

Max
by maximan
Mon Sep 29, 2008 4:33 am
Forum: General
Topic: IPSEC doesn't work on v3
Replies: 18
Views: 5387

Re: IPSEC doesn't work on v3

This is my problem too. But the same config works on V2.9.

Max
by maximan
Wed Sep 24, 2008 1:38 am
Forum: General
Topic: IPSEC doesn't work on v3
Replies: 18
Views: 5387

Re: IPSEC doesn't work on v3

Well, i upgrade to 3.14 and the problem still. Now i try with 2 different configurations, both works on 2.9 The first one is for make each peer and policy /ip ipsec proposal set default auth-algorithms=md5,sha1 disabled=no enc-algorithms=des,3des lifetime=0s name=default pfs-group=modp768 /ip ipsec ...
by maximan
Tue Sep 23, 2008 9:54 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 308564

Re: Sample Hotspot Page - Sticky Please

Very Nice examples!!!
With CSS is only that you need, this is the most easy way to make an website (or table with html)

Max
by maximan
Sat Sep 20, 2008 3:40 am
Forum: General
Topic: IPSEC doesn't work on v3
Replies: 18
Views: 5387

IPSEC doesn't work on v3

I have a network with 8 remote sites and I do a VPN with IPSEC. The VPN server is a Mikrotik. It was working without problem for months, but the HD crash and i lost my router (this had MT v2.9.35). The remote site are (mix) Micronet VPN router, RB532 and linksys vpn router. I bought an RB450 to repl...
by maximan
Fri Sep 12, 2008 2:50 am
Forum: General
Topic: how can i redirect packt to wan etho
Replies: 3
Views: 730

Re: how can i redirect packt to wan etho

You can't do this, because the layer7 works when the connection is estableshied, so you can not route an connection estableshied.

The manual of L7 explain this

Maxi
http://maxid.com.ar
http://mikrotikexpert.com
by maximan
Wed Aug 27, 2008 10:43 pm
Forum: RouterBOARD hardware
Topic: Is PPPoE the secure connection to use?
Replies: 4
Views: 1392

Re: Is PPPoE the secure connection to use?

you can use IPSEC and/or over another VPN protocol

Max
by maximan
Mon Aug 25, 2008 2:07 am
Forum: General
Topic: Is 'fetch' authentication broken?
Replies: 2
Views: 1125

Re: Is 'fetch' authentication broken?

I guess that the user and pass is for mode=ftp only. I read this, but i don't found where.

Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Sat Aug 23, 2008 4:49 am
Forum: Beginner Basics
Topic: how to stop any p2p
Replies: 12
Views: 7638

Re: how to stop any p2p

Señores, este foro es solo para escribir en inglés.

This forum is only in english

Max
by maximan
Fri Jul 25, 2008 8:52 pm
Forum: Beginner Basics
Topic: Directories available with FTP
Replies: 1
Views: 811

Re: Directories available with FTP

No, that is all! The only files availables are the same that you can see on FILES on winbox.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Thu Jul 24, 2008 1:27 am
Forum: General
Topic: 1:N dst-nat for emule
Replies: 13
Views: 2852

Re: 1:N dst-nat for emule

by maximan
Wed Jul 23, 2008 3:26 am
Forum: General
Topic: mikrotik doesn't drop ares on v3.11
Replies: 5
Views: 1818

Re: mikrotik doesn't drop ares on v3.11

I try with 2 different pattern but is not working fine. I don't know how the another solution like netenforce have layer7 for ares.

Max
http://maxid.com.ar
http://mikrotikexpert.com
by maximan
Wed Jul 23, 2008 3:13 am
Forum: Beginner Basics
Topic: Need help installing a SSL Certificate
Replies: 12
Views: 4265

Re: Need help installing a SSL Certificate

There are an example on the wiki.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Jul 18, 2008 9:26 pm
Forum: General
Topic: mikrotik doesn't drop ares on v3.11
Replies: 5
Views: 1818

mikrotik doesn't drop ares on v3.11

Mikrotik doesn't drop the ares on mikrotik v3.11 i have this add action=drop chain=forward comment="drop ares" disabled=no p2p=warez on the top, the rule doesn't count and the ares can connect. I see it on the connection list. anybody have the same? Max http://mikrotikexpert.com http://maxid.com.ar
by maximan
Thu Jul 17, 2008 5:01 am
Forum: General
Topic: PPPOE and random queue missing problem
Replies: 192
Views: 42027

Re: PPPOE and random queue missing problem

I have 650 pppoe client on average, 900 on the heavy hour without problem. My server Xeon 3.4ghz, 2mb cache l2 , 1gb ram. ROS 2.9.49. It have about 4 month without reboot. Edit: It have 50mbps on wan, very strong quality of service, a lot firewall rules. Regards Max http://mikrotikexpert.com http://...
by maximan
Thu Jul 17, 2008 4:30 am
Forum: General
Topic: Transfering settings
Replies: 8
Views: 2275

Re: Transfering settings

But you need to install with CD or netinstall. Another thing if your ROS is cracked you will have 24 hs to purchase one license.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Mon Jun 30, 2008 6:06 pm
Forum: General
Topic: Maximum number of subqueues in PCQ?
Replies: 7
Views: 1100

Re: Maximum number of subqueues in PCQ?

if i don't bad remembers SFQ have until 1024 subqueue. PCQ it's a modification of this to select the src/dst of port and IP.

Maxi
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Tue Jun 24, 2008 1:12 am
Forum: Wireless Networking
Topic: NStream 2, Redundancy?
Replies: 9
Views: 3072

Re: NStream 2, Redundancy?

Check the wiki, on mum argentina:
http://mum.mikrotik.com/presentations/A ... sicion.pdf

This is something like you are searching,
Use bonding!

Max
http://maxid.com.ar
by maximan
Tue Jun 24, 2008 1:03 am
Forum: Wireless Networking
Topic: how to achieve the quick roaming
Replies: 3
Views: 1433

Re: how to achieve the quick roaming

With station mode you can't add this interface to bridge.
On wiki there are example for roaming.

Max
http://maxid.com.ar
by maximan
Fri Jun 13, 2008 2:23 am
Forum: General
Topic: virtualization
Replies: 60
Views: 21988

Re: virtualization

does the rb1000 support VT ??
Max
by maximan
Thu Jun 05, 2008 11:36 pm
Forum: General
Topic: Ares Detection with layer7 ?
Replies: 0
Views: 525

Ares Detection with layer7 ?

I see on the website of allot that the solution of them could detect the Ares, and more 4 class of ares: Ares, Ares torrent, ares premiun, ares galaxy, ares lite.
In the site say that they use layer7, but my question is how could they can do it??

Regards

Max
by maximan
Thu Jun 05, 2008 1:39 am
Forum: Scripting
Topic: Using fetch to retrieve IP lists
Replies: 43
Views: 15183

Re: Using fetch to retrieve IP lists

Thanks changeip, tks for sharing your knowlege .
Max
by maximan
Wed Jun 04, 2008 12:32 am
Forum: General
Topic: Autoload ???
Replies: 2
Views: 618

Re: Autoload ???

Tks

Max
by maximan
Tue Jun 03, 2008 11:30 pm
Forum: Scripting
Topic: Add ip to address list but dynamic
Replies: 1
Views: 1061

Add ip to address list but dynamic

I create an script, but i want to add a ip to address list, but i don't want to create a static address list. I want to create an dynamic entry (with lifetime). I don't find this option. If don't exist can MT Team add to ROS.

Regards

Max
by maximan
Tue Jun 03, 2008 11:24 pm
Forum: General
Topic: Autoload ???
Replies: 2
Views: 618

Autoload ???

I think that a few months ago, I read something like if I upload a file to Mikrotik with special name, the RouterOS automaticaly import this file and the configuration into this file.
Anybody remember the name of this feature??

Max
by maximan
Tue Jun 03, 2008 1:17 am
Forum: General
Topic: Configuring VLAN Trunking on MT Router to Cisco C2924 Switch
Replies: 25
Views: 76891

Re: Configuring VLAN Trunking on MT Router to Cisco C2924 Switch

You can add "HOWTO:" on the title or write a article on wiki.

Max
by maximan
Tue Jun 03, 2008 1:01 am
Forum: General
Topic: PPPOE and random queue missing problem
Replies: 192
Views: 42027

Re: PPPOE and random queue missing problem

I have the same problem. I see the queue simple without counting upload or download. If this happend i do an script to disable and enable this queue, after that the queue work fine.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Thu May 15, 2008 2:10 am
Forum: General
Topic: Load balance through two connections PPOE
Replies: 2
Views: 834

Re: Load balance through two connections PPOE

Yes, you can do it!. Mikrotik Support interface routing


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Thu May 15, 2008 2:05 am
Forum: General
Topic: Block remote desktop
Replies: 1
Views: 804

Re: Block remote desktop

Just Drop tcp port 3389 (RDP) and 5800 (VNC)


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Thu May 15, 2008 2:00 am
Forum: Beginner Basics
Topic: two wans and only one for mail
Replies: 5
Views: 1614

Re: two wans and only one for mail

Just mark routing the smtp tcp dst port 25 and then do a policy routing with this mark


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Apr 18, 2008 9:42 pm
Forum: Beginner Basics
Topic: how to install USB eathernet driver?
Replies: 2
Views: 1159

Re: how to install USB eathernet driver?

You can not install external drivers


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Apr 18, 2008 9:20 pm
Forum: General
Topic: MT and Virtual Server
Replies: 1
Views: 678

Re: MT and Virtual Server

by maximan
Wed Apr 09, 2008 11:36 pm
Forum: General
Topic: new DSCP(TOS) value.. ERROR
Replies: 3
Views: 3733

Re: new DSCP(TOS) value.. ERROR

Nice!!!
Thanks

Max
by maximan
Wed Apr 09, 2008 11:23 pm
Forum: General
Topic: bloquear msn
Replies: 1
Views: 921

Re: bloquear msn

Este foro es en ingles. This forum is on english.
On the wiki there are an example to block IMs

Max
by maximan
Wed Mar 05, 2008 8:35 pm
Forum: General
Topic: ip public
Replies: 1
Views: 507

Re: ip public

you can do it with Bridge or Proxy-Arp too.

regards


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Wed Mar 05, 2008 8:03 pm
Forum: General
Topic: RouterOS
Replies: 3
Views: 608

Re: RouterOS

RouterOS doesn't support scsi


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Mon Mar 03, 2008 10:04 pm
Forum: Beginner Basics
Topic: did you see a case like this before ?
Replies: 2
Views: 947

Re: did you see a case like this before ?

what interface do you have set (on queue) ?
what version of mt ?

Max
by maximan
Mon Mar 03, 2008 10:01 pm
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3613

Re: Upgrade License

Rafa:
you can not upgrade the license, just buy a new


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Feb 29, 2008 11:23 pm
Forum: General
Topic: HOTSPOT PROBLEM 3.3
Replies: 1
Views: 470

Re: HOTSPOT PROBLEM 3.3

can you explain with more details


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Feb 29, 2008 10:55 pm
Forum: Beginner Basics
Topic: Are there books to learn more about ROS
Replies: 7
Views: 1509

Re: Are there books to learn more about ROS

You must to read the manual, and take a training. You can see what is the best for you at training.mikrotik.com


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Feb 29, 2008 10:25 pm
Forum: General
Topic: downgrade
Replies: 1
Views: 504

Re: downgrade

Yes, you can. Just upload the package 2.9.50 and go to system package downgrade


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Fri Feb 29, 2008 10:17 pm
Forum: Beginner Basics
Topic: volume of data monthly
Replies: 4
Views: 1156

Re: volume of data monthly

You can use radius or user manager


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Tue Feb 26, 2008 9:23 pm
Forum: General
Topic: how to block my client that not pay?
Replies: 17
Views: 4330

Re: how to block my client that not pay?

Just redirect all the traffic 80 (for example) to you website/server, and this server have the page with a message for pay.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Tue Feb 26, 2008 2:49 pm
Forum: General
Topic: how to stop shearing on Mikroti
Replies: 6
Views: 1099

Re: how to stop shearing on Mikroti

Use Firewall rules to stop it and disable default forwarding.
this is working only with wireless clients.
Default forwarding is for wireless
firewall rules for IP (layer 3)


Maxi
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Tue Feb 26, 2008 2:12 pm
Forum: General
Topic: web proxy language
Replies: 3
Views: 629

Re: web proxy language

You can not modify this pages.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Tue Feb 26, 2008 2:02 pm
Forum: General
Topic: SSL and Hotspot MT2.9.38
Replies: 5
Views: 808

Re: SSL and Hotspot MT2.9.38

If you wish, you can add the step to step on the wiki. It could help to somebody on the future :)


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Mon Feb 25, 2008 7:31 pm
Forum: General
Topic: Load balancing incoming trafic
Replies: 4
Views: 880

Re: Load balancing incoming trafic

use dst-nat with random option


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Mon Feb 25, 2008 6:50 pm
Forum: General
Topic: SSL and Hotspot MT2.9.38
Replies: 5
Views: 808

Re: SSL and Hotspot MT2.9.38

Search on this forum, there are step to step for add SSL to hotspot


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Mon Feb 25, 2008 6:43 pm
Forum: General
Topic: [Ask] Redirect Traceroute
Replies: 6
Views: 1390

Re: [Ask] Redirect Traceroute

Mark the icmp traffic with routing-mark and add static route for this mark


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Thu Feb 21, 2008 11:30 pm
Forum: General
Topic: PPPoE server
Replies: 3
Views: 777

Re: PPPoE server

Check the firewall for icmp

Max
by maximan
Thu Feb 21, 2008 11:11 pm
Forum: General
Topic: Need VLAN help
Replies: 13
Views: 3169

Re: Need VLAN help

Since Mikrotik do not have Q-in-Q built-in :(
Thanks - SB
Mikrotik support Q-in-Q, read the Mikrotik News, there is the announcement

Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Thu Feb 21, 2008 11:01 pm
Forum: General
Topic: how to stop shearing on Mikroti
Replies: 6
Views: 1099

Re: how to stop shearing on Mikroti

Use Firewall rules to stop it and disable default forwarding.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Wed Feb 20, 2008 9:16 pm
Forum: General
Topic: Open all ports to my lan
Replies: 3
Views: 3014

Re: Open all ports to my lan

You can use in-interface without port and forward all the port to any host. Futhermore you can define range of port like 0-65355.
Read the manual and you can see it clearly.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Wed Feb 20, 2008 9:13 pm
Forum: General
Topic: QOS with TOS
Replies: 1
Views: 1504

Re: QOS with TOS

Mikrotik v2.9 works with TOS, V3 with DSCP.
You can add, modify or remove the DSCP field.


Max
http://mikrotikexpert.com
http://maxid.com.ar
by maximan
Tue Feb 19, 2008 6:17 pm
Forum: General
Topic: PPPOE Server Broken on v3.3,3.2?
Replies: 16
Views: 2211

Re: PPPOE Server Broken on v3.3,3.2?

The support file only can be read by the team mikrotik (support), send to support@mikrotik.com


Max
http://mikrotikexpert.com
http://maxid.com.ar
  • 1
  • 2