Community discussions

MikroTik App

Search found 24 matches

by veso266
Mon Mar 23, 2020 6:50 pm
Forum: Beginner Basics
Topic: Disable Interface at certain hours
Replies: 2
Views: 1211

Re: Disable Interface at certain hours

nice Thanks, didn't know this is possible
Is it possible to do the same from Winbox or its this command line only?
by veso266
Sun Mar 22, 2020 6:56 pm
Forum: Beginner Basics
Topic: Disable Interface at certain hours
Replies: 2
Views: 1211

Disable Interface at certain hours

Hi there, I know how to disable internet at certain hours /ip firewall filter add action=drop chain=input comment="Block access for user ZAIB from 1:pm till 3:pm" disabled=no src-address=172.16.0.10 time=\ 13h-15h59m59s,sun,mon,tue,wed,thu,fri,sat now How would I apply this to an interface, say I wa...
by veso266
Thu Oct 17, 2019 11:04 am
Forum: Beginner Basics
Topic: Branding Maker for Trainer
Replies: 7
Views: 1083

Re: Branding Maker for Trainer

I can confirn that if you write to support@mikrotik.com and explain to them why do you need that (even if the reason is as stupid as: "I would like to show some image on my LCD because I am sad and I will feal better if I can constumize stuff around my house" :)) you will get it with no problem couz...
by veso266
Wed Oct 16, 2019 11:43 am
Forum: Beginner Basics
Topic: Branding Maker for Trainer
Replies: 7
Views: 1083

Branding Maker for Trainer

Hi there I was wondering if Mikrotik Trainers (or even regular geeky users) can get acsess to Branding Maker on special request, I know its only uvailable to Distributors but I would is it possible that on request Branding option would be added for Trainer accounts maybe? Thanks for Anwsering and Be...
by veso266
Mon Sep 23, 2019 5:49 pm
Forum: General
Topic: IPV6 only network
Replies: 12
Views: 1611

Re: IPV6 only network

hmm then external DHCP it is something like this: https://www.weird-solutions.com/carrier-solutions/dhcp-broadband but its expensive but its good like Simple DNS Plus which I am using as my main DNS Server BTW: How do I specify in RA/SLAAC(Advertise DNS) that I want to use some other DNS Server not ...
by veso266
Mon Sep 23, 2019 4:51 pm
Forum: General
Topic: IPV6 only network
Replies: 12
Views: 1611

Re: IPV6 only network

can I use mikrotiks dhcp6-server for that
if yes How can I set it up since it has no nice setup wizard like ipv4 dhcp sever

BTW: Why use RA if there is dhcp is RA better? or is it only used on dual stack?
by veso266
Mon Sep 23, 2019 4:44 pm
Forum: General
Topic: IPV6 only network
Replies: 12
Views: 1611

Re: IPV6 only network

nope

maybe its a problem because I am using PPPoE to get ipv4,6 adress and I cannot seem to disable getting ipv4 one

BTW: how do computers get ipv6 adresses anyways since DHCPv6 server is blank in winbox? if no DHCP -> no ipadress?
by veso266
Mon Sep 23, 2019 4:33 pm
Forum: General
Topic: IPV6 only network
Replies: 12
Views: 1611

Re: IPV6 only network

but I already have some dynamic DNS servers in ip->DNS
2a00:ee0:d::13
2a00:ee0:d::23

so DNS should work
by veso266
Mon Sep 23, 2019 4:20 pm
Forum: General
Topic: IPV6 only network
Replies: 12
Views: 1611

IPV6 only network

Hi there I have been running Dual stack for a while and I wanted to cut ipv4 part of the internet and try it on ipv6 only my ISP uses PPPoE so I am getting /56 prefix which I distribute to my local network to set this up as dual stack I had to /ipv6 dhcp-client add add-default-route=yes interface=pp...
by veso266
Fri Sep 20, 2019 4:34 pm
Forum: Forwarding Protocols
Topic: IPV6 Firewall allow specific port on specific ip only
Replies: 6
Views: 2612

Re: IPV6 Firewall allow specific port on specific ip only

so that is what is diferent
BTW which one need less power to perform its action: "drop" or "reject"
by veso266
Fri Sep 20, 2019 4:16 pm
Forum: Forwarding Protocols
Topic: UDPXY alternative for mikrotik
Replies: 8
Views: 4841

Re: UDPXY alternative for mikrotik

just so its no forgotten
udpxy or something similar would be great
by veso266
Thu Sep 19, 2019 7:32 pm
Forum: Forwarding Protocols
Topic: IPV6 Firewall allow specific port on specific ip only
Replies: 6
Views: 2612

Re: IPV6 Firewall allow specific port on specific ip only

Hi
does someone know why something like this: http://www.ipv6scanner.com/cgi-bin/main.py
reports ports as being filtered instead of closed, how can a tool know if a port is blocked by firewall or it is closed?
can I change my firewall rules so ports will aphear closed not filtered?
by veso266
Wed Sep 18, 2019 10:26 pm
Forum: Forwarding Protocols
Topic: IPV6 Firewall allow specific port on specific ip only
Replies: 6
Views: 2612

Re: IPV6 Firewall allow specific port on specific ip only

Thank you I would never thought it is so easy
by veso266
Wed Sep 18, 2019 7:58 pm
Forum: Forwarding Protocols
Topic: IPV6 Firewall allow specific port on specific ip only
Replies: 6
Views: 2612

IPV6 Firewall allow specific port on specific ip only

Hi there, I recently have setup ipv6 on my router, after following some recomended firewall settings from here: https://wiki.mikrotik.com/wiki/Manual:Securing_Your_Router#IPv6_firewall_for_clients /ipv6 firewall filter add action=accept chain=forward comment=established,related connection-state=esta...
by veso266
Thu Dec 01, 2016 10:05 pm
Forum: General
Topic: route only 1 ip from VLAN into bridge
Replies: 0
Views: 305

route only 1 ip from VLAN into bridge

Hi I have the folowing problem: I have 1 VLAN with id 3999 for IPTV and untagged vlan for PPPoE Internet my local bridge has gateway: 192.168.88.1 and there is also DHCP Server and DNS Server on it but I would like to acsess timeshift streams which are only available on IPTV VLAN 3999 on 10.253.7.11...
by veso266
Sun Oct 16, 2016 9:25 pm
Forum: General
Topic: Feature request for v7.x
Replies: 273
Views: 70294

Re: Feature request for v7.x

Udpxy to relay multicast to unicast for IPTV: http://www.udpxy.com/index-en.html
by veso266
Sun Oct 02, 2016 8:29 pm
Forum: Forwarding Protocols
Topic: UDPXY alternative for mikrotik
Replies: 8
Views: 4841

UDPXY alternative for mikrotik

Hi I would like to know is there any alternative for udpxy in RouterOS (or will udpxy support be added) as I am now running OpenWRT MetaRouter just for udpxy and it is a wate of resources as CPU goes up to 100% when I start to play a stream on my pc (it can only convert SD Channels from multicast to...
by veso266
Sun Sep 25, 2016 5:14 pm
Forum: General
Topic: can't ping second subnet from mikrotik
Replies: 7
Views: 1292

Re: can't ping second subnet from mikrotik

well I solved it I created PPPoE Server on ether6 connected WAN port from ISP router to it and also tag VLAN with id 3999 on ether6 (connecting it to another VLAN tag 3999 which is on ether1 for IPTV for VOIP i did the same expect used VLAN tag 3998 instead) everything worked OK exept the router alw...
by veso266
Sat Sep 24, 2016 9:28 pm
Forum: General
Topic: can't ping second subnet from mikrotik
Replies: 7
Views: 1292

Re: can't ping second subnet from mikrotik

Hi thanks for anwsering the thing is that router is an ISP Router that performs some functions that I can't seem to acomplish on mikrotik so I would like to reverse the order normally this ISP Router is connected to ISP Main network (which uses Huawei HG8010H to convert from FTTH to UTP) and this ro...
by veso266
Fri Sep 23, 2016 7:25 pm
Forum: General
Topic: can't ping second subnet from mikrotik
Replies: 7
Views: 1292

Re: can't ping second subnet from mikrotik

well allright my main router Mikrotik is on 192.168.88.1 and has /24 subnet mask the second router which is connected to ether6 of my mikrotik is on 192.168.1.1 and has /24 subnet mask I would like to ping the second router from mikrotik and I would also like to comunicate with the second router fro...
by veso266
Fri Sep 23, 2016 3:11 pm
Forum: General
Topic: can't ping second subnet from mikrotik
Replies: 7
Views: 1292

can't ping second subnet from mikrotik

Hi I have 2 routers my main one which is RB2011UiAS-2HnD-IN and second one which also has DHCP Server I've tried to connect 2 router into mikrotik ether6 port and I can't seem to ping it from it (it has default ip 192.168.1.1) when I do ping 192.168.1.1 I get timeout (I also can't open its webpage f...
by veso266
Wed Sep 21, 2016 3:46 pm
Forum: Forwarding Protocols
Topic: Share Internet and TV on the same cable without the need of VLAN tag
Replies: 4
Views: 1489

Re: Share Internet and TV on the same cable without the need of VLAN tag

Hi i've changed downstream interface to bridge but for some reason it is still inactive: Flags: X - disabled, I - inactive, D - dynamic, U - upstream # INTERFACE THRESHOLD 0 I bridge 1 1 IU IPTV 1
by veso266
Wed Sep 21, 2016 1:27 pm
Forum: Forwarding Protocols
Topic: Share Internet and TV on the same cable without the need of VLAN tag
Replies: 4
Views: 1489

Re: Share Internet and TV on the same cable without the need of VLAN tag

Hi I've factory reset the router to test without defoult config and I've putted IPTV (vlan 3999 (where IPTV is)) on upstream and ether2 (where I would like to have Internet and IPTV) on downstream but it stil doesn't work and I even remove VLAN IPTV from every bridge Here is all my config: # sep/21/...
by veso266
Tue Sep 20, 2016 2:03 pm
Forum: Forwarding Protocols
Topic: Share Internet and TV on the same cable without the need of VLAN tag
Replies: 4
Views: 1489

Share Internet and TV on the same cable without the need of VLAN tag

Hi I would like to share IPTV and Internet on the same Ethernet cable my ISP sends IPTV on vlan 3999 and internet doesn't need any VLAN so I've created 1 VLAN with id 3999 on ether1 (gatway to internet) and bridge it to ether6 (when I connect to ether6 with pc only TV works and I don't have internet...