I mean this part, it invoke a "capsman" script

# Test if CAPsMANN is installed, if yes, run capsmann script.
# ----------------------------------
:if ( ([:len [/interface find where type="cap"]] > 0) and $CAPsMANN) do={ /system script run capsman }

Where I can find the capsman script?

Hi everyone, I need your help to solve a strange problem with my hotspot login. Since I configured a valid certificate and activate HTTPS login, clients need to authenticate every "keepalive timeout" expires even if I set authentications via HTTP-CHAP,HTTPS,Cookie,Mac cookie. The only chan...

Hi everyone, I'm trying to implement a new hotspot system instead of a traditional password secured network, my network consist of one RB3011 and 8APs, one per each apartment I rent plus common areas. I would setup a basic hotspot system, every cAPs would have 2 SSID, my LAN network and Guest Networ...

Same problem here, 2y without any problem, after last power failure poe is not longer working on my RB3011 and SXT5 Lite AC.
Tried SXT with external POE Injector and it works. Is there any solution?

Yes I'm using the official splunk image with internal syslog stored on local volume (I'm using Docker on my Synology NAS). Here is my config: docker run -d --net host -v /volume3/docker/Splunk/etc:/opt/splunk/etc -v /volume3/docker/Splunk/var:/opt/splunk/var -v /etc/localtime:/etc/localtime:ro -e &q...

Hello Jotne, Have you ever considered using a dockerized Splunk Environment? I lately tested this but did not get any mikrotik information in Splunk. My "normal" Splunk envirnoment is working. I'm actually have my splunk environment on docker working perfectly. Inviato dal mio SM-G950F ut...

+1 for Wireguard

Thanks for your reply, I just tried without success and I suppose here is the correct answer: viewtopic.php?t=143849#p708150

So basically I will keep the pihole dns as primary mikrotik DNS and change it with public servers in case of fails.

I couldn't get netwatch to trigger properly with all of its permissions restrictions. For my home use case, running a little script once a minute from the scheduler seems to work well. I have my DHCP Server > Networks > DNS Servers pointed to my MikroTik router gateway address so clients do not nee...

Does it worked for you?
I tried your solution using the same bridge horizons value on different CAPs but clients just connect once at a time. If I have a client connected on AP1 another client on AP2 is unable to connect.

Did you had the same problem?

Thanks everyone for the answers, It's seems to be working since 7 days now so I prefer to not changing anything! :D I just uncommented the line MAX_TIMESTAMP_LOOKAHEAD = 23 and the time zone is also working properly, to be sure I also set the NTP to all devices and nothing else. If I will have some ...

Finally it's working!
Just uncommented the option: MAX_TIMESTAMP_LOOKAHEAD = 23 "inside /opt/splunk/etc/apps/MikroTik/default/props.conf"

You do not have the possibility to try a test server and install Splunk as root with only follow the first post?` Whats wrong in your case is a riddle. It's a real riddle! :D The server is running as a root on my last test with ubuntu but nothing is changed. Now I just changed the port from 5014 to...

Strange. Are you 100% your server is listening on Syslog UDP/514? Here is how to test. Search for this with REAL-TIME - 1 minute window "hello" Then on a linux server run this command. (Change IP (local host 127.0.0.1) to your server if you do test this on an other server : echo "<14...

What does then stop? (looks correct) You should from the scrip (if you have installed it) get data every 5 minutes. So search for star and search for 30 min window, you should see data coming in all the time. Yes the script is installed, I had the 30 min windows search and no data are showed even w...

See if your prefix is correct at section 2b. On wrong characters and it break all. You can also do a search with only a start * and set it to last 24 hour and see what data you get. Yes it's correct, if I do that search last packet is 2 ours ago now while the counter is increasing Immagine.jpg

I'm having a strange problem both on my synology with docker and my windows pc also, I configured everything as described, I got many logs from my router but after a while it stops reading while counters are still increasing. Checking via tcpdump, logs are arriving to the server but is like they are...

Only if your Mikrotik is used as DHCP server continue here, else ignore the following steps. Check that each IP has a valid comment. I used the comment name as hostname. Script: manuel_export_dhcp_splunk :log info "export_dhcp_splunk"; :local hostname; :local mac; /file print file="e...

Only if your Mikrotik is used as DHCP server continue here, else ignore the following steps. Check that each IP has a valid comment. I used the comment name as hostname. Script: manuel_export_dhcp_splunk :log info "export_dhcp_splunk"; :local hostname; :local mac; /file print file="e...

problem is that the bandwidth test generator is single threaded at this time and can't create enough throughput. It is the recommendation of MT to not test on the infra itself but THROUGH the component, so no _additional_ load. And you confirmed this as ac2->3011->ac2 can sustain 1gb. Thanks a lot ...

Hi everyone, I'm having this following problem with my RB 3011, testing the link from RB 3011 to my APs hAP ac2, i'm not reaching the gigabit speed. If i test with bandwidth test, I have close to Gb/s in Download from hAP ac2 to RB 3011 but I can't reach more than 500Mb/s in upload from RB 3011 to h...

No one can help me

Hey there, I'm writing to ask about some tips to prioritize the traffic on my network. I checked a lot over internet and finally I configured my mangle rules and queue trees. As per the last tutorial I found on internet, my mangles rules marks just packages and not the connections. Starting from thi...

I checked the ether1 with a multimeter, it goes to ground that's the problem. I can still use the router without the ether1, just disabled to be sure

Or check what voltage is on each pin of Eth1 port. Use "octopus" made from a spare connection cable or better the one which you do not need, cut it to have RJ45 connector and a few cm of cable left, unstrip each line and check it for over voltage or short circuts. Thanks for your suggesti...

Mmmm... that could indicate a damaged port, if ether1 isn't the master for any other port. Have you tried another port in the mean time? Ether1 is the wan port itself, the ether2 is the master for the 3 and 4. If i try to connect the ISP modem to ether2 configured with dhcp client it get the addres...

How are you powering it? Do you have a multimeter? if so, measure AC/DC from RB951 ethernet metallic frame to ground, could be a defective power unit/strip causing an electric shunt, there's nothing on the 951 per se that could damage another unit, less on its ether1 (PoE-in) port, unless its inter...

Hi to all Mikrotik's useres, I'm writing here because since a couple of days I have a problem with my mikrotik which is driving me to crazy!! Since once I bought it the ether1 was a bit difficoult to let it work. I have my ISP modem/router connected to ether1 as dhcp client, the port stay always as ...