Hello !

Is Router OS vulnerable to the CVE-2020-8597 ?

https://www.kb.cert.org/vuls/id/782301/

I dont have the server config ... Sorry ...

Yes +1

I am new as well to Mikrotik, but I have a good working system using Dual stack and PPoE, so I share my config with you. I hope you can find good idea for your setup... 8) /interface bridge add disabled=yes name=LO add name=lan1 add name=lan2 /interface ethernet set [ find default-name=ether1 ] name...

Looking to make IKEv2 IPSEC Tunnels
Try to find a workaround
Have to wait for ROS 7
Tell customer no solutions and no ETA
Customer angry
Lie down
Try Not to Cry
Cry a Lot

Please provide the ETA for ROS v7. IKEv2 is critically needed.

+1000

Not very much support on this forum indeed...

Work great for me !

http://www.observium.org/

I did make IPSEC IPv6 VPN using Zywall, it is working great.

But look like IPSEC IPv6 VPN work better (or only maybe) using IKEv2 ! Wich is not supported yet on Mikrotik

Strange... I used a Draytek router for a while and it requests a /64 for its WAN and one for its LAN. In my MikroTik config I have a separate guest WiFi network and it has its own /64 plus the /64 for my LAN (ether+WiFi bridged). The AVM Fritzbox my ISP provides does the same thing. So needing more...

My most-wanted IPv6 features: Ability to send AAAA records in dyndns updates Stateless DHCPv6 server Stateless NAT64 (CLAT function of 464XLAT deployment, a very useful feature for ISPs - they can make their network work with v6-only on the access and distribution layers, with a centralized statefu...

Any news about that ???

Any news about that ?

I need to set priority for IPv6 as well !!!

. It's not affecting routing, but is it OK to leave the WAN interface as a link-local address? Or is it simply fine to request the user use one of the /64 in their delegated pool for their WAN?
.

I would love to know too !

Ideally, it would be nice to be able to specify the DNS servers in DHCPv6 options as Windows does not support ND RDNSS. Also with IPv6 ND, I would like to be able to manually configure the DNS servers to advertise. For example as it stands it will not use the RouterOS cache only the servers it cach...

I had to do so on my side.
It is working fine

Hello, I need to connect to a IPSEC Concentrator (Zywall USG) and route all together. The subnet on the Mikrotik side is 172.20.25.0/24 On the Zywall side there are : - 2 local subnets : 172.20.0.0/24 and 172.20.1.0/24 - 12 remotes subnets : 172.20.5.0/24, 172.20.10.0/24, 172.20.30.0/24, 172.20.31.0...

Hello !

I need to make many IPv6 IPSEC Tunnels between a datacenter that has an Zywall.
There is only IKEv2 supported for IPv6 tunnels on a Zywall.

So you tell me that I have to buy crappy Zywall to do it ?

Any other solutions ?