if I want to using static dns that anything that contains/end with akamai.net goin to specific address,what should I do? Im using ros3.23
I just try that docs says
/ip dns static add name=".*\\.akamai\\.net" address=11.22.33.44
but not working at all
anyone please?

dear all, I wanna ask about static dns. as long as I know to set static dns on mikrotik are like this : www.domain.com 111.222.333.444 But right now I want to configure many subdomain to 1 IP address, may I just do right this: *.domain.com 111.222.333.444 or I have to do it manually one by one? than...

I just wanna know if routerboar/mikrotik support ubiquity xr1 or not, cause it NLOS and otherwise using atheros ar5414 chipset too...
anyone has try it? please gave me some review?

any suggestion please? i have no clue at all :/

Not enough information to answer yet. Are you using the hotspot? When you say 'disconnected', do you mean from the internet? Or unable to get an ip? Or disconnected from the radio? The MT crew takes the weekend off if you haven't noticed. You will see them start to answer posts Monday morning Latvi...

nobody ever got same problem with me? or should I using any tunnel for it?
Any suggestion please? nomos, sergejs? cause its annoying me a lot

I got some problem when I to applying different IP with same mac address on my ROS. For several hours its working well. but after that suddenly its disconnected. all i have to do just clear that ip mac from arp-list and its will working fine again for next several hours. mac that i have been clear w...

hi I try to understand well QoS in RouterOS and I have one question. I'm accustom to use tc from a command so please tell me HOW to properly implement this scenerio: tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps tc clas...

Did u disable masquerade or src-nat?
If u disable masquerade or src-nat any massanger wont work

Another P2P thread, just wanna know thereis any default port that using by P2P so we can block it at all? Cause i just put :
/ip firewall chain=forward p2p=all-p2p action=drop
and its not help at all, so it`s better to block port that P2P use at all... anyone please?

Dear Mikrotik`ers, I got some problem here. I`m sharing my internet connection to several clients using wireless connection and its have no problem until now. Some of my client sharing their connection to another people too. So, how I can limit my client so their can`t share their connection to anot...

yes you can make groups of users and give each group a dedicated bandwidth to share equally between the members of each qroup .. making groups by using ADDRESS LIST .. marking the traffik by this example from wiki by Valens : http://wiki.mikrotik.com/wiki/Queue_with_Masquerading_and_Internal_Web-Pr...

@brundier why u dont use simple queue......? @sergejs which is the best queue types.....? I was using simple queque its working well but it cant share my bandwidth equally. Just like : I want to make a group like 128kbps for 8 users and each user can get equal bandwidth 0f 8kbps if group get maxima...

Use the particular configuration example to apply PCQ queues, http://www.mikrotik.com/testdocs/ros/2.9/root/queue_content.php#6.54.6.3 a) use 'connection-mark' option as matcher for 'packet-mark' rules. b) make sure you do not have 'queue simple' rules, that might limit marked traffic in mangle. I ...

I still cant found what was wrong, can u tell me sergejs ?
Thanks.

I`m using snat but not define out-interface but so long it has not a problem, its make problem if i`m using pcq ? Here is my mangle rule : [admin@router] > ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting src-address=192.168.100.61 action=mark-routing new-rou...

Packets should be marked in 'chain=prerouting', if 'global-in' matcher is used.
http://www.mikrotik.com/docs/ros/2.9/ip ... 6643278583

So my configuration was right, anyway I use SNAT there is same rule with MASQUERADE or thereis another rule if I use snat?
Thanks.

Use 'torch' to find out the traffic is not marked by mangle (and not limited by the queues).

Most traffic just port 80.
About marking connection and packet, what kind of chains i must apply? prerouting or forward?
Any idea please?
Thanks.

I run MT 2.9.6 with 4 interface : eth0 = to 1st ISP eth1 = to 2nd ISP eth2 = to proxy server eth3 = to intranet eth0 has 2Mbps up and down bandwidth and eth1 has 128kbps up and down too. Now, i want to share my intranet client to 64kbps up/down using eth1 so i just do like manual says : 1. do mark-c...

Anybody please? no answer yet

I use MT 2.9.6 and want to shape my bandwidth using simple queque but with design of tree. Just like this : Parents parent=none up/down=512k/512k 256_1 parent=Parents up/down=256k/256k client1 dest_ip=192.168.100.10/32 parents=256_1 up/down=32k/64k client2 dest_ip=192.168.100.11/32 parents=256_1 up/...

Just forward on port 113.

so i must forward my connection to port 113 at another server that run inetd server? More details please. Thanks.

I got trouble here,
i want to set static ident for my internal networks that do snat when connected to irc network. so each client get they own ident and can`t change that. that is possible on mikrotik?
thank you.