The update resets the hotspot files! I have the login customized and it's now gone!

I just updated an old 951 and it seems the problem is only on the new hap ac's (not the brand new hap ac 2)

Broken:
DHCP over EOIP (no encription)
Some devices don't get IP's even directly connected - Panasonic VOIP phone. Works fine in 3.37.3

Software 6.38 cpu usage for fasttrack connections very high. For example ( 951g-2hnd at 750mhz) bandwidth 300 Mbps 6.37.3 cpu usage 30-40, 6.38 cpu usage 80-85. My 951G dropped from 305 Mb/s with ~50% CPU (6.37.3) to 210 Mb/s with 100% CPU (6.38). I had to downgrade to keep the speed up. If I check...

I recreated the configs this Saturday and it doesn't work on 6.37.1 - vlan9 and vlan40 Vlan9 it's the WAN side and it worked in 6.34.2 (minimum version that I could use), and as soon as I upgraded it didn't work any more, no traffic between member ports. Also if I don't have the tag on spf1 it does ...

Hey 0012nish I have the same config without "egress-vlan-translation" and the example pages don't specify that it's required. A friend of mine has only "egress-vlan-tag" and "ingress-vlan-translation" and it works. Can you help me out with a couple of questions: 1. On w...

Yes, I used this:
http://wiki.mikrotik.com/wiki/Manual:CR ... Based_VLAN
For the first requirement I don't need the tagged vlan so I didn't put that in.

Also, the switch chip page does not apply to CRS series.

Hello Requirements: 1. Ports 1-6 isolated - switching the public net - goes to the routers/phones 2. ports 7-24 isolated - switching and trunking links to other switches - I need several networks here, in order to use 2+ wires for the trunks Problem: I create manually the VLAN 99 containing the port...