Community discussions

MikroTik App

Search found 5 matches

by Mordraug
Sat Jul 13, 2024 10:37 pm
Forum: Beginner Basics
Topic: Wireguard no handshake on iOS
Replies: 4
Views: 1333

Re: Wireguard no handshake on iOS

I assume the /ip firewall filter add action=accept chain=input comment=\ "defconf: accept established,related,untracked" connection-state=\ established,related,untracked rule must be accepting it, since Android phone connects just fine from the internet. Also I ran the sniffer to see what'...
by Mordraug
Sat Jul 13, 2024 8:35 pm
Forum: Beginner Basics
Topic: Wireguard no handshake on iOS
Replies: 4
Views: 1333

Wireguard no handshake on iOS

I created a simple wireguard configuration for 2 peers (Android phone and iPad) the Android phone works without an issue but the iPad doesn't even handshake. I used qr code to transfer configuration to both and they have same configuration other than ip and keys, I even added ipads configuration to ...
by Mordraug
Sat Jul 13, 2024 5:53 pm
Forum: Beginner Basics
Topic: Port forwarding with hairpin NAT and dynamic IP combo
Replies: 12
Views: 1430

Re: Port forwarding with hairpin NAT and dynamic IP combo

That's the solution I was looking for! I wasn't aware that you can put dns address in the address list, especially since you can't do that directly in dst address. I'm already using a DDNS so that was a plug and play solution, thanks!
by Mordraug
Sat Jul 13, 2024 4:16 pm
Forum: Beginner Basics
Topic: Port forwarding with hairpin NAT and dynamic IP combo
Replies: 12
Views: 1430

Port forwarding with hairpin NAT and dynamic IP combo

I'm trying to figure out the best way to deal with NAT in my situation since recently my ISP was taken over by a different company that refuses to assign me a static IP. I used to have all the dstnat rules setup with Dst Address set to my WANs ip, because it is no longer static I tried changing it s...
by Mordraug
Thu Oct 20, 2016 4:54 am
Forum: General
Topic: Ping-spikes and packet loss problems on RB433AH
Replies: 0
Views: 750

Ping-spikes and packet loss problems on RB433AH

Hello, I have network connection at home arranged like this: ISPs network->CISCO EPC3928S (in bridge mode)->RB433AH->PC&other. Since my bandwidth was rised to 150mbps I experience ~15% of packet loss and very unstable pings. Problem however does not exist if I connect directly to PC. Core of thi...