It all depends on which DNS server they are all using. If it's a mikrotik equipment, you can try using the static entries at IP>DNS. But for more options, performance and uptime I would recommend setting up a linux server with Bind dns server. (Requires some research. Easy tutorials found online) Se...

Just disable DHCP on RT2600 and instead of plugging the cable on the blue wan port, plug it into one of the lan yellow ports. There you go, got a bridge on RT2600.

Sent from my SM-N910C using Tapatalk

Hello there. Well, I'm facing an issue with IPv6 since the first time my ISP offered it, a few months ago. My problem is this: I have a link with two RBs, one RB750 as modem client and one RB433 as last mile in my home. The ISP offers me a /64 and an IPv6 address as usual. The /64 I send to a pool a...

I have just deployed a Metal 52 ac and am using it on the 2.4GHz spectrum. Setting it to 10MHz Channel Width causes errors: I am aware that Mikrotik ac does not work on 10Mhz. But I'm not even using AC Band or 5GHz. Is it possible to fix this or will I have to use Metal 2SHPn's? Thank you in advanc...

try reseting and reconfigure manually. other than that try to upgrade or just buy a new one if that one is that old..

Sent from my SM-N910C using Tapatalk

So above is the bug report; please administer in your systems the way you can handle it best. The problem with this approach is this is a user forum, and not an official support platform. And unless you write to support@ your report is very likely to remain completely unnoticed by the Mikrotik staf...

Hi, I had a surge and I have two RB433AH with fried lan1 .. Now.. nand is formatted and I cannot upload firmware on other lan ports. Is there any possibility I can upload firmware? modified u-boot? maybe you have some modified routerBoot? I'd appreciate it! I guess it's not possible. :( Sent from m...

you need to use a serial-to-serial cable or a serial-to-USB





Sent from my SM-N910C using Tapatalk

Hi all, I was trying to format the Micro SD card installed on my Mikrotik RB450G, but in the middle of the process electricity goes off and after that I can't access the routerboard. I've tried many time the netinstall process but netinstall can't find the routerboard. Is there any other way to rec...

let say I want to create 2 hotspot user with 2 profiles I have proxy running on the router and I want to be able to deny access to http://www.movies.com in profile 1 but not in profile 2 can I do this? deny access depend on the proflie? Thanks , set up firewall(set the hotspot on extra) and mangle ...

Hi all, I was trying to format the Micro SD card installed on my Mikrotik RB450G, but in the middle of the process electricity goes off and after that I can't access the routerboard. I've tried many time the netinstall process but netinstall can't find the routerboard. Is there any other way to rec...

Just a few SQ rules causes noticeable CPU consumption. Is it possible in some way to lower this consumption? Or what to use instead. I could use Queue tree - but in that way I lost possibility to see graphs of individual SQ rules... Try creating a custom queue type based on the one you have, but wi...

Update and don't use quickset. Make the settings directly without the quickset.

I guess he is just reporting the bug.. More luck reporting at support [at] mikrotik.com

Sent from my SM-N910C using Tapatalk

I don't think so. Cable modems use their operators certificates for docsis.

Sent from my SM-N910C using Tapatalk

Netinstall.

can netinstall fix that?

Sent from my SM-N910C using Tapatalk

Hello I read many foruns about ipv6 and mikrotik and try to config, but not work. My scenario: 1 - Router of my telecom (Copel Telecom Brazil) model HG8245H in DualStack IPv4 & IPv6 2 - RouterOS v6.34.1 Router ---> Mikrotik --> Lan In Mikrotik IPV6 i get ipv6 on DHCPv6 Client check request Addr...

Dear Understood, But here i want the link between router boards as a backup link... if any of one routerboard disconnected from the core router due to cable or any switch fault... It should be connected via 2nd RouterBoard.. then you should read about link failover using ospf Sent from my SM-N910C ...

Nobody???

you may have to access them via serial to check their bootloader and force a netinstall

Sent from my SM-N910C using Tapatalk

if the /64 is dynamic then get address and /64 on master and pass the /64 via dhcp6 to slave. at slave get the /64 to a pool and set lan interface address to pool with eui64 enabled. (then maybe ospf but can work fine without if u set routes via fe80 addresses)

Sent from my SM-N910C using Tapatalk

easy to solve using routing protocols like ospf

Sent from my SM-N910C using Tapatalk

Hi,

Here's my suggestion and question at the same time.

Is IP>Cloud coming any time soon for ipv6 ?

Because, It's more than needed.

Hello there, this is my first post in this forum. Well, I'm facing an issue with IPv6 since the first time my ISP offered it, a few months ago. My problem is this: I have a link with two RBs, one RB750 as modem client and one RB433 as last mile in my home. The ISP offers me a /64 and an IPv6 address...