MikroTik

LeftyTs

MikroTik needs to provide better power supplies and stop using that cheap capacitors.

MikroTik needs to do better electronic design actually. The capacitor quality seems good. The same exact capacitor right next to C10 is of the same quality and works very well for many years now.

LeftyTs

You are right that heat causes this issue. We have already upgraded the parts in newer revisions of this model, this is the first CCR design after all. New CCR models have other designs and do not suffer from heat anymore. We do plan to release a replacement 1036 in near future, where the PSU desig...

LeftyTs

Please also add ability to group same MAC address devices to a single one.... Thank you

LeftyTs

It should be fairly easy to please add Facility and protocol (tcp/udp) to remote syslog servers besides port. I would like to send all Dude logs to a specific facility

LeftyTs

It is very necessary to add support SNMP TRAP

+1000000000000000

We have been waiting for this for years now

LeftyTs

I have been looking for a very light and simple SNMP monitor other than what ROS has to centralize and simplify monitoring of a few MT devices. Of course and there are many solutions out there and very fancy ones too but I wanted something really fast and light. I haven't used MRTG and RRDtool for o...

LeftyTs

Try this template from cfgmaker --if-template=template for all your interfaces and keep the ones you want after upgrading your ROS to the latest if(not $problem_lines) { $target_lines .= <<ECHO; Options[$target_name]: growright,nolegend,nobanner,unknaszero,bits Target[$target_name]: 1.3.6.1.2.1.31.1...

LeftyTs

And this is the CPU host template that can be used with mrtg (--host-template) my $target_name = $router_name . "_cpu"; $target_lines .= <<ECHO; YLegend[$target_name]: Percentage CPU load ShortLegend[$target_name]: % Legend1[$target_name]: CPU load in % Legend2[$target_name]: Legend3[$targ...

LeftyTs

I see some new routers like CCR2004 (arm 64) use the long term but newer ones same model come with v7. I am planning on getting a couple of CCR2116 very soon but I want the stability of a long term release. I see however that only v7 is supported according to the specs. Will I be able to downgrade t...

LeftyTs

R1CH, there is no crash here my friend so no worries, What you are saying is already well known and not the issue here but thanks anyways! ;) Wait until you get a SYN Flood DDoS and watch your MikroTik (doesn't matter which model or how much bandwidth you have) become totally unresponsive. I alread...

LeftyTs

Yes jprietove, that is exactly the answer I was looking for. The expire value does not seem to be well documented. Thank you for the example

R1CH, there is no crash here my friend so no worries, What you are saying is already well known and not the issue here but thanks anyways! ;)

LeftyTs

Even the newer version does not explain what the expire value is for and why would you want to use a 10s expire time for 32 packets/1s time frame. It still uses 10s without explaining why the expire value should be as such. So the question remains, how do I drop and blacklist any traffic above 6 pac...

LeftyTs

According to this https://wiki.mikrotik.com/wiki/DDoS_Detection_and_Blocking the expire time has a bug so 10s is actually 1s. Can anyone please through some light if this is still the case? What is the expire value needed for in any case? I am trying to set a rule to drop and black list all udp traf...

LeftyTs

System files have always been hidden / not accessible for a user in RouterOS. Packages are now following the same principle. Please undo this change, it serves no useful purpose and has many disadvantages. Please revert this change. +++ I totally agree with pe1chl , macsrwe and r00t . Please revert...

LeftyTs

[admin@switch] > sy pa up do channel: stable installed-version: 6.46.1 latest-version: 6.46.2 status: Downloaded, please reboot router to upgrade it [admin@switch] > file print # NAME TYPE SIZE CREATION-TIME 0 skins directory jan/01/1970 02:00:09 Nothing seems to download in quite a few MT devices

LeftyTs

Hello, Two days ago upgraded to 6.46.1... Since then, cannot connect to Huawei MA5608T OLT using /system telnet . When I press <ENTER> console is behaving like I double press <ENTER>. So, during the authentication process, I type the username, and when I press <ENTER> console add second <ENTER> so ...

LeftyTs

No issues here so far in a few dozen MT devices. Seems like some really old problems with CRS switches with low speed interfaces or high speed ones loosing IP connectivity have been addressed and resolved. Good job. Keep it up that way.

LeftyTs

@LeftyTs - what exactly happens when you try to install the new version (e.g. boots with old version, boots with backup version, does not boot at all)? Please try loading the backup firmware by pressing the reset button for a few seconds and then perform the manually upgrade. I have tried to upgrad...

LeftyTs

@LeftyTs - what exactly happens when you try to install the new version (e.g. boots with old version, boots with backup version, does not boot at all)? Please try loading the backup firmware by pressing the reset button for a few seconds and then perform the manually upgrade. I have tried to upgrad...

LeftyTs

I can not upgrade a CSS106-1G-4P-1S unit. Anyone else with the same issue or is it just me? Manual or automatic upgrade does not work!

LeftyTs

On the topic of CRS328: Since there are always going to be conflicting opinions between people who require a quieter experience and don't mind it running hotter (but still within spec) than usual and people who don't mind the noise and prefer running them cooler.. Why not finally offer options to s...

LeftyTs

hAP Lite (RouterBOARD 941-2nD) - still problem with space. (32MB RAM) Last stable version which I could install is something around 6.40.x Empty file list, almost bare metal config, file download OK, but after reboot it says "no space" The only answer from support is "It's strange, d...

LeftyTs

I know it, but I would like download via the command line. No problem: /tool fetch url=("https://download.mikrotik.com/routeros/6.45.3/routeros-".[/system resource get architecture-name]."-6.45.3.npk") This will work if you have the main package installed but if you have package...

LeftyTs

No, I don't think there was any announcement at all unless I missed it also.

LeftyTs

6.45.3 was posted 3 days ago so mirrors should be in sync by now. /system package update check-for-updates comes with the same message also.

It is actually posted in main site also as the current release

https://mikrotik.com/download

LeftyTs

Strange, it does not seem to work from 6.45.2 to 6.45.3. Actually it does not even detect there is a 6.45.3 version available. It comes with a "System is already up to date" message.

PS: Using CLI or Winbox, still the same message in quite a few different mikrotik systems.

LeftyTs

Is there a way to auto upgrade RoS when single packages are installed instead of the main package? It seems like "system package update" works only when RoS main package is installed?

LeftyTs

Perhaps packages like mpls, ipv6 and hostspot should be dropped from the base RoS distribution. Would be even better if from the main RoS distribution individual packages could be uninstallable instead of just disabled.

LeftyTs

I run many services on this router, such as OSPF, OpenVPN and etc. Downgraded to 6.44.5 yesterday, the uptime is 10h until now without any issues. I run DHCP BGP Firewall NAT VLANs SFP+ L2TP (server and clients) UPnP SNMP Scripts Schedulers in most of them and so far not a single issue. Maybe the p...

LeftyTs

My CCR1009-7G-1C after upgraded to 6.45.x, it rebooted every night.
The logs says
"router was rebooted without proper shutdown, probaly kernel failure.
Kernel failure in previous boot."

Any solutions?

Checked any hardware/power issues? A few CCRs are working perfectly OK here

LeftyTs

Hi, Are there any plans to check/fix the half duplex ethernet issue in v6.45? I keep on getting this message in a CRS326 switch. ether16 excessive or late collision, link duplex mismatch? This happens in half duplex ethernet interface and there is no mismatch according to config as I have forced the...

LeftyTs

I've got a hAP-lite and hAP-mini in a test setup for OSPF routing, neither will upgrade. I deleted all files in the "Files" menu entry and it still won't upgrade. I rebooted them, still won't upgrade. The error is "not enough space". Maybe this is the end of the line for lower e...

LeftyTs

On device in bridge or station mode?

I have used it in a unit with bridged ports (Ether/WiFi) and worked without issues.

LeftyTs

Does someone have a problem with mac telnet login via neighbours?
Won't login with any user and pass or without pass, nor admin..
I have the same problem.

MAC telnet works perfect here

LeftyTs

In a CRS326, RoS complains about collisions in a half duplex interface. I have had problems before with this interface as it needed to be reset every few days [Ticket#2018122022004844]. I have even set the specific Ethernet interface to "full-duplex=no speed=10Mbps" and those warning messa...

LeftyTs

Not hard to find out

Of course not, as long as you know what you are looking for

Thank you

LeftyTs

I am trying to limit all traffic of some RoS devices and I need the trusted IP ranges of Mikrotik in order for the upgrades to work properly. CIDR format would be perfect. I have already tried to include 159.148.172.0/24 (download.mikrotik.com) but it does not work properly when I issue a "syst...

LeftyTs

Will it ever be possible to filter ipsec logs by peer? Debugging is pretty much impossible if you have a ton of tunnels active. +1K I think the log part need to be rebuild, for betther debugging For better debugging and analysis you should consider sending to a remote log server. Makes life much ea...

LeftyTs

One thing I would like to see in 6.45 is some hardware SNMP improvement for the CCR1072. As stated in ticket #2019032822004818, many hardware OIDs are missing for this device, compared to what Winbox shows : - Board temperature - Board temparature 2 - Fan speed 3 - Fan speed 4 - PSU1 status (should...

LeftyTs

I am still having problems with ethernet ports of a CRS326 switch. It happened again twice in the same port the past week. A 10Mbit half duplex port, only 2 meters away from the switch, stopped from responding to IPv4 pings and I had to disable and enable the port twice within a week in order to com...

LeftyTs

First time I see tx-queue1-packet being used in a CRS326 switch. It was always the tx-queue0-packet all the time. The switch seems to work faster now in some tests I have done.

LeftyTs

Other models don't need update from 6.43.15?

It is a w60g only fix so if you don't have it, you don't need it

LeftyTs

In a couple of CRS326 switches I have the exact same problem for a few months now. Ports that appear to have high rx-overlows in interface ethernet statistics, for some strange reason after a certain time become unresponsive. Before v6.44 if I was disabling and re-enabling the problem port, it would...

LeftyTs

I have NO IPSEC configuration, but at ROS 6.44.3 export file is: #error exporting /ip ipsec mode-config #error exporting /ip ipsec peer #error exporting /ip ipsec policy group #error exporting /ip ipsec profile #error exporting /ip ipsec proposal BUG, BUG, BUG If I recall it correctly, these "...

LeftyTs

Hi there, I’m about to setup load balancing on a routerboard running 6.44.3 Is anyone aware if load balancing works under this OS version. I’ve read there have been some issues on previous versions in the past. Thank you. I am using 2 load balanced routers in 2 different locations (PCC load balanci...

LeftyTs

Hello, anyone experienced issue with cpu temperature after last upgrade? I upgraded my device (CCR1036-12G-4S) from 6.42.3 to 6.44.3, and after that CPU temperature increase exponentially, I attach a screen Thanks Best Regards Check your fans. I don't have any problems with the upgrades in a few of...

LeftyTs

Problem with FreePBX and 6.44.3 - don't allow to register on external sip account
version 6.43.14 fix the problem

You should check and review your firewall rules

LeftyTs

MAC telnet broken in 6.44.1, appears to be when router has multiple interfaces. Problem on all routers we've upgraded to 6.44.1 whilst 6.44 worked perfectly. We'll need to lab this, to provide more granular detail... Thats worrying, But I can't confirm this at home [xxxxxxxx@rba] > /ip neighbor pr ...

LeftyTs

Updated all my devices from 6.44 to 6.44.1 thru dude, no problems ipsec site-to-site run fine l2tp-ipsec roadwarrior dailin works fine Eddie Can you show your config? I am unable to get windows clients for l2tp ipsec to work... it's lost somewhere in phase1 or 2 For me, windows l2tp ipsec client al...

LeftyTs

Latest release, I was forced to re-enable dhcp package almost everywhere because of many errors errors like those.

LeftyTs

Any ideas why in a LHG XL 5 ac wireless interface, even though wmm-support=disabled in the wlan1 interface, when I monitor wlan1 the interface shows wmm-enabled: yes? Is this a ROS bug?

LeftyTs

However, likely the firmware is not changed and that 3.41 release is byte-for-byte the same as the 6.42.6 release except for the number. If it's the same then this is something Mikrotik should fix and do it automatically and ONLY when needed. It is misleading to increase the firmware without any ch...

LeftyTs

Many different devices have been upgraded successfully from the previous bugfix release. However, one of the CCR routers, and ONLY one of them (other CCRs worked fine), decided to reset its configuration after the upgrade and I had to restore it using a serial cable from the backup configuration sav...

LeftyTs

No speed (pps/bps not CPU)?

LeftyTs

Please improve electronic design and more specially the electrolytic capacitor quality! I have had numerous hardware failures due to electrolytic capacitor quality.

LeftyTs

I can't get RoMON to work. When I try to connect with ssh it simply keeps on asking for password over and over again without actually connecting. Ping and discovery work. Anyone with same problem?

LeftyTs

That is why there are gas discharge units and surge arresters for proper static discharge. If the only reason is the static build up in the grid, there is really no point to do that since it is already attached directly to the master and if the UTP grounding is also part of it, then, there is a real...

LeftyTs

I am using a couple of LHG 60G model RBLHGG-60ad. Next to the UTP there is a grounding connector. How critical is to use this? Should it be grounded directly to the master/tower? Is this grounding pin connected with the grounding UTP also? Is there any grounding loop danger?

LeftyTs

Yes, it bricks. I had the same exact issues in many Mikrotik platforms. Most people have recommended netinstall but it is not very practical in many installations. The only remotely way I found, was to first upgrade from 5.26 to bugfix and then to current. It worked for all my installations. I had a...

LeftyTs

Personally I leave ssh open but that's the only thing and I really hope that doesn't get hacked... Even that could get hacked. It is exposed to annoying dictionary attacks all the time. Now days, best practice is to simply work through carefully secured and encrypted VPNs and nothing else open to t...

LeftyTs

My RB doen´t want to update to teh Latest Version....
Any ideas?

Very possible the space problem

LeftyTs

An approximation chart on how far the LHGs can work, under normal weather conditions, in relation to speed, would be really nice

LeftyTs

Health problem with a 1100AHx2. Every 10-20 seconds current and power-consumption seem to flash on and off. system health print interval=1 fan-mode: auto use-fan: main active-fan: main voltage: 12.1V temperature: 32C cpu-temperature: 34C fan1-speed: 4579RPM system health print interval=1 fan-mode: a...

LeftyTs

Did anyone else encounter the same issue? Any tip or advice?

Try to disable fasttrack in firewall, if you have it on. I have had a few problems with it in a few installations.

LeftyTs

I wonder if the same limitations and/or problems apply to LHGG-60ad. Anyone installed them? We are expecting a pair of those and I was wondering what would be the best stable ROS for it. It will be a production link so stability is a must.

LeftyTs

I am having a dhcp problem also with VLANs. One of the voip devices gets an IP from a different dhcp-server VLAN every time I reset the switch. If I reset the device after then dhcp assigns proper IP. I will be sending a supout to support about this.

LeftyTs

I am trying to stop some icmp traffic here but I am having some firewall trouble with it. /ip firewall filter add action=accept chain=input connection-state=established,related,untracked in-interface-list=WAN add action=drop chain=input connection-state=invalid in-interface-list=WAN add action=accep...

LeftyTs

Would anyone know which versions of ROS are affected by this space problem?

LeftyTs

Hi Guys I have upgraded on of my x86 edge bgp peering routers from 6.37.4 to 6.40.8, I have noticed the the following issues on ipv6 bgp sessions that sessions with MD5 Keys do not establish a connection but the ipv4 sessions do. I then upgraded the same router to 6.42.1 and the ipv6 bgp sessions w...

LeftyTs

Ever wondered why there is no passively cooled 10G switches?

It is only a matter of time. As things get smaller power consumption will eventually decrease and passive cooling will be possible.

LeftyTs

As for the HDD problem - we are currently trying to find out how to reproduce this problem. If anyone can share such information (step-by-step), then please send in an e-mail to support@mikrotik.com. Is it possible that all of the affected devices had partitions? No, I am very certain partitioning ...

LeftyTs

The RB450Gx4 would be nice also for home usage but for a bigger office I don’t think it can handle it. For example, if I want to add the full IPv4 BGP table as well as IPv4 country blocking then I am not sure that even the latest model of RB1100 would be capable of handling it. Is that a job for a C...

LeftyTs

Yes, I think RB1100AHx4 would be perfect, thank you. I thought RB1100 was not passive cooling though. I had older models and they were not for sure. I agree, CCR1009 is an overkill for what I want.

LeftyTs

RB750GR3 and HAP are probably for small home type of usage. Sorry I didn't specify but I was thinking for something more like an office type of router that can handle 2-3 fast ethernet internet connections and a few dozen firewall rules with possibly a dozen active VPN connections. WiFi is not reall...

LeftyTs

What would be the best and most powerful MT SOHO router (switching speed is not required) with passive cooling?

LeftyTs

I am experiencing in a CRS1xx and a CCR1016 running ROS v6.42.4 the same exact problem, when fasttrack-connection is enabled both devices start to speed up at first but after a few minutes slow down extremely very much. Both have a very similar set up like this: /ip firewall filter add action=accept...

LeftyTs

I wonder if there will ever be a *nixbox as well. Would anyone know if there is any mac telnet client for *nix systems that works with ROS?

LeftyTs

I have upgrade my SXT LTE (band 3,7), from ROS 6.42.3 to 6.43RC27. But after upgrading... I can't get access to my SXT LTE. Wrong username or password message. Device is on tower so, difficult to reset device. What is the problem? Try to recover with MAC telnet if possible. I had the same issue and...

LeftyTs

How do you watch the space of your default drive? I can't seem to find this anywhere. I can tell from the backup file as it gets larger and larger every time that there is something wrong with the space but how do you know the consistency and reliability of the rest of your files? /System check-inst...

LeftyTs

Depends on how well your car is heavily guarded or not. lol

LeftyTs

And, keep "current" a bit more regularly. Running such old versions is a security risk, that is widely known in all of the software world. Security risk is really not as important as functionality and speed to me in some installations as those old versions are not accessible. I was actual...

LeftyTs

I did test upgrade from 5.26 to this version. Just for testing. Everything went well. Upgrade failed for you due to configuration or something like thta. In general it works just fine. Nothing worked for me either when I upgraded from v5.26 straight to 6.42.3 and I tested it in different platforms ...

LeftyTs

The official Mikrotik response to this issue was that nstream dual is no longer supported in latest ROS versions and they have no plans to do so in the future. I hope this may save a few people some time trying to fix a known and broken ROS feature. This broken and obsolete feature should have been ...

LeftyTs

Sorry about that. This is just a typo error. It actually is 1.1.1.2/24 (I have edited the real IPs/MACs and changed them).

There is no firewall anywhere. This is the whole actual configuration.

LeftyTs

I am having the following issue with a dual nstream network. I upgraded from v5.26 to v6.42.3 and the dual stream link stopped working so I reset to factory defaults everything and reconfigured both end points from scratch. I followed the how to guide as described (https://wiki.mikrotik.com/wiki/Nst...

LeftyTs

UPDATE

After using v5.26 for a long time only because of this BGP serious issue for me, I decided to try an upgrade again. It seems the problem is solved with v6.42.2 however the problem still remains with the bugfix release v.6.40.8.

LeftyTs

I am getting the same error here after upgrading a couple of old v5.26 installations to v6.42.1. Some of them do not have it but others do.

Netinstall is not a good solution, it is a disaster if you have quite a few remote installations.

PS: Sending the supout.rif

LeftyTs

I am using a very simple iBGP setup for a few years now. routing bgp export # nov/03/2016 8:42:02 by RouterOS 5.26 # /routing bgp instance set default as=1111 client-to-client-reflection=yes disabled=no ignore-as-path-len=no name=default out-filter="" redistribute-connected=yes \ redistrib...

Search found 88 matches