I tried different settings but all the time I have max 75-80 Mbit/s.
I don't know why...
I went with the Macbook next to Mikrotik and all time I have the same.

Wired connection I have 98-100 Mbit/s.

I check and I have about 75-80 Mbit/s all time... I don't know why...

I don't have 5GHz networks in my area so I should have about 100 Mbit/s wifi speed no problem... I check it when will be in home, thanks.

Such a connection should 100 Mbit/s without a problem like that?

Yes, now the settings are correct. If it still goes wrong, try changing the width or channel (frequency).

Ok but 20/40/80 Ceee will be good?

Turn off auto frequency. Select fixed channel, e.g. 5180 MHz.
Don't use 802.11a mode if you don't must. Set n and ac.

It will be ok?

https://i.postimg.cc/zf3WNZ4D/4mt.png

Bring it further away. Try other wifi frequency in settings. Make sure you have all 3 chains enabled.

This is my 5GHz configuration: https://postimg.cc/gallery/1rjz2x9u6/

I have Mikrotik RB962UIGS and wifi speed problem. My connection WAN is 100 Mbit/s and cable LAN speed is OK about 98 Mbit/s. I have my MacBook Pro 13 2017 connected to this Mikrotik 5GHz and my connect is good condition. I have max only 75-80 Mbit/s I don't know why... my MacBook I have 2 meters fro...

I know but wired connection I have 100 Mbit/s no problem.
Wireless I have to about 70 Mbit/s max.

Normis help me please I think whether to change the router for another one...
I can give You access to my Mikrotik and can You look?

Maybe this is problem Mikrotik with Apple devices?

This is not a reliable way to test anything, but in any case, make a screenshot of the connection information in wireless "registration table" when you do this speedtest. So we can see the signal and noise data.

Ok please look: https://postimg.cc/gallery/gp0j4kvw/

This is not a reliable way to test anything, but in any case, make a screenshot of the connection information in wireless "registration table" when you do this speedtest. So we can see the signal and noise data.

Ok I do it about 5pm.
I does it yesterday and i had about 500 Mbit remember...

How did you get that speed? Try iperf3 between two computers, instead of simple file copy. I don't have other 1Gbit computer. But WAN speed (5GHz wifi use) to my computer should be 100 Mbit/s no problem... I don't know why is only 70 Mbit. Like I asked, how did you test this 70Mbit? I'm connect to ...

How did you get that speed? Try iperf3 between two computers, instead of simple file copy.

I don't have other 1Gbit computer.
But WAN speed (5GHz wifi use) to my computer should be 100 Mbit/s no problem... I don't know why is only 70 Mbit.

We have tested 700Mbit between two Macbook Pro computers, through this router. We used iperf3 for testing. So where Can I have problem? I have 100 Mbit/s WAN and wired connection no problem... and 5GHz a/c 70 Mbit/s only... I see "registration" in MT 500-866 Mbit/s. Maybe must I set any in MT confi...

I haven't other 1Gbit hardware.
But i need capacity to my computer

About 70Mbit/s is max speed on this model Mikrotik?

Ok but I can do about 5 pm.
I have default configuration wifi 20/40/80 MHz Ceee.
I don't know why is this problem.
This model Mikrotik will be no problem 200-300 Mbit/s 5GHz yes?
2 meters to router.

please post an export of your config. please use a wired connection and retry dslreports what are your wireless conditions ? distance ? number of walls ? type of walls ? number of active clients ? Wired connection has 100 Mbit/s no problem. I have empty freq 5GHz about my home - 0 walls and router ...

So where is a problem?

My wireless config https://postimg.cc/gallery/1l93b0w1o/
DSL reports I have about 78 Mbit/s

Hello I have a RouterBoard RB962UiGS-5HacT2HnT hAP ac and I have wireless capacity problem. I have WAN 100 Mbit/s and MacBook Pro 13 2017. All is 5GHz connection and in registration I see 866 mbps... but I have only 70 Mbit/s WAN speed MAX. What can be a problem? Channel width I have 20/40/80 MHz Ce...

I have IPSec tunnel between Mikrotik RB952Ui-5ac2nD and Stormshield SN300. Tunnel is established but transfer is very very slow. I don't know why... I check algorithms sha1/aes256, sha1/des etc... transfer is slow all time. Maybe can I set some option in my Mikrotik? Please help me fix it. https://s...

Now phase 2 try connect but I don't know why algorithms are none.
I have set sha1/aes256 all both sides.

I have a problem with IPSec tunnel on my RouterBoard RB952Ui-5ac2nD. I try connect IPSec with UTM Stormshield SN300. All option I set ok, encryption is the same but established only phase 1. Phase 2 I don't see connect in log file... What can I do? I must set NAT or firewall on Mikrotik? https://s22...