Hello, I've been seeing packet loss for some time now. My home-network is very simple. Home-gateway-> CRS226-24G-2S+ <-> RB960PGS (hex PoE) CRS and HEX working as switch (all ports are bridged). Just disabled the "hardware offload" for all interfaces in the bridge solved the problem. CRS r...

Same problema here.

CRS226 with 7.6

Q1: 900Mbit/s (cpu core goes to 100%) Q2: max 1200mhz Questions re the Mikrotik CCR1036-8g-2S and btest throughput Q1: What kind of UDP bandwidth btest speed to you get when you test to 127.0.0.1 (your local loopback address) ? Q2: Can the CCR1036-8g-2S be over clocked ? (Winbox -> System -> Routerb...

Testing from Brazil (city: Sacramento, State: Minas Gerais)

17 hops away !!!
router interface:

Nice service !!! btw, our CCR1036-8g-2S+ can only btest 2.5gbit/s (cpu running btest goes to 100%).

welcome to bugOS world !!!

Memory Leak not solved !! running 6.1 on CCR1016 .. after some pppoe connections... memory use are growing... then, routerboard reboot.. (i have sent it to support). running 6.2rc1 .. same problem... HOLLY CRAP !!!!!!!!! When one 'stable' version will be release ? one version that i can use all of m...

Hello,

I have a router with MPLS enabled in ether1 (link), the client is in ether2 ..

Simple queue attached in ether2 interface...

with mpls on, simple queue doen´t work... mpls off, simple queue works..



in this case, with mpls on, i need to use TE tunels ?!

seems api daemon not closing the sessions !!!

running x86 4.17 !!

Hello, i´m trying to do this: [admin@Orbit] /log> print where message~"failed" 14:35:04 pppoe,ppp,info <pppoe-0>: terminating... - user ajcorrea authentication failed 14:35:35 pppoe,ppp,info <pppoe-0>: terminating... - user ajcorrea authentication failed 14:36:06 pppoe,ppp,info <pppoe-0>: ...

also sent two emails to support, but I believe they will not implement this in future versions. This option is essential for anyone who uses BGP with IXP's... I'm pulling down all mikrotik routers, switching back to cisco boxes because i need AS info on flow !! I like mikrotik as router.. BUT some f...

running two rb1000 with 2 peers each (full table each peer).. sometimes are better reboot the router !! when changing routing filter cpu goes to 100% for a long time.. (15.. 20 minutes) !! i have the same situation runnin on vyatta 5.x on celeron with 512m ram and it´s very faster !! as gustkiller s...

how i can build rule filter in forward chain to match ip src that try to connect to one port but different dst addres... if src try to stablish connection o same port on many diferrent hosts.. i need to log or add to address list.. it´s to identify users with worm using remote SMTP to send spam... a...

Hello, all customers get internet access connecting via PPPoE, i need to redirect users to one page first, i´m trying to use radius (replying) to pppoe-server this: WISPr-Redirection-URL := http://www.site.com/ but this works only with HOTSPOT !! how i can do this using pppoe ?! and if not, i can su...

hello !!

thanks for support

now it´s working fine !!


regards !

hello !!

i made a clean re-install. but.. same problem !!

my antennas are 14db sector.. (hyperlink)

13 very low ??? (default are using 19db)


my cards are

senao NMP-5354+Aries(2)

power are set to default

and the ROS 3.1 .. but some case on 2.9.50 ...

can anyone please explain-me because clients with a good signal (-50dbm) getting very high ack-timeout (like 308us) ... distance client from ap 800 meters...

thanks !

Hello, I made some videos that explain how to mark packets comming from web-proxy cache (local cache), and bypass QUEUE LIMITS (or limiting them) !! See the videos at: This video are for users who runs web-proxy on the same router: http://alexandrecorrea.under-linux.org/50-video-como-fazer-o-cache-f...

Newer mikrotik version (tested 3.0 and 3.1) not couting packets and bytes at firewall rulles !!

see attached image !

the system is running x86 routeros 3.1