Community discussions

Search found 19 matches

by flaviojunior
Wed Mar 27, 2019 1:04 pm
Forum: General
Topic: IKEv2 - Road Warrior (NAT Workaround)
Replies: 50
Views: 6068

Re: IKEv2 - Road Warrior (NAT Workaround)

IPSec has several problems with NAT, L2TP use IPSec too, if the client is before 2 NATs it doesn't work, PPTP is not secure anymore. The best option is to use OVPN or SSTP that works great on any network topology :D

Sent from my Vivo XI+ using Tapatalk

by flaviojunior
Thu Mar 21, 2019 12:58 pm
Forum: Beginner Basics
Topic: Can't connect to web interface internal
Replies: 10
Views: 545

Re: Can't connect to web interface internal

You should start by connecting to it and exporting current config ("/export hide-sensitive compact") and post it here, between <code> tags.[/quote]Hi, can you test the connectivity? If you area reaching the router. Try to ping. If you won't is that the point why you are not accessing it by web. The...
by flaviojunior
Thu Mar 21, 2019 12:29 pm
Forum: Beginner Basics
Topic: Speedtest.net error
Replies: 3
Views: 470

Re: Speedtest.net error

Hi All I have applied this topic and all is working fine except speedtest.net I have error https://forum.mikrotik.com/viewtopic.php?f=13&t=108771&sid=330b13e70e1c5db8c5ae4c5ec29d4f6d when I disable it all is working the error pic is in attach Thanks for all Hi dear, there is no fault on the configu...
by flaviojunior
Thu Mar 21, 2019 12:25 pm
Forum: Beginner Basics
Topic: [Help] Access Bridged GPON modem in front of Mikrotik
Replies: 16
Views: 880

Re: [Help] Access Bridged GPON modem in front of Mikrotik

So, you could try to put the IP 192.169.1.2/24 on the Ethernet where you connect for pppoe. It probably works too, but be careful to not put the IP on the interface pppoe, it need to be on the Ethernet interface Sent from my Vivo XI+ using Tapatalk Yes, that is what I tried at first. But it is not ...
by flaviojunior
Thu Mar 21, 2019 12:23 pm
Forum: Beginner Basics
Topic: need basic understanding
Replies: 8
Views: 587

Re: need basic understanding

Hi megaman RouterOS can be installed in a X86 PC. The PC should have at least 1 network card so the software can be "usable". If you have a tplink router, you can bridge it (for example if it is a vdsl router) and connect a RouterOS behind it to to the PPPoE client and routing. I would recommend a ...
by flaviojunior
Thu Mar 21, 2019 4:05 am
Forum: Beginner Basics
Topic: [Help] Access Bridged GPON modem in front of Mikrotik
Replies: 16
Views: 880

Re: [Help] Access Bridged GPON modem in front of Mikrotik

So, you could try to put the IP 192.169.1.2/24 on the Ethernet where you connect for pppoe. It probably works too, but be careful to not put the IP on the interface pppoe, it need to be on the Ethernet interface

Sent from my Vivo XI+ using Tapatalk

by flaviojunior
Thu Mar 21, 2019 3:15 am
Forum: Beginner Basics
Topic: [Help] Access Bridged GPON modem in front of Mikrotik
Replies: 16
Views: 880

Re: [Help] Access Bridged GPON modem in front of Mikrotik

[edit] Just struck me ... I can see that you're running PPPoE client on vlan interface. Try to move 192.168.1.2 IP address from ether1-WAN to vlan35 interface and see if this makes any difference. Thanks again, I tried it too but it is not working. It stated the same unknown0. Let's try to help you...
by flaviojunior
Thu Mar 21, 2019 1:43 am
Forum: Beginner Basics
Topic: RB3011UiAS-RM Speeds
Replies: 5
Views: 368

Re: RB3011UiAS-RM Speeds

So I'm not seen any issue of configurations. Now repeat the speed test with /tools profile open, this command will show you all the processes of the router and how much CPU it's consuming. Other important think it's to see on the interface if are getting TX or RX error. Show us the results :D Sent f...
by flaviojunior
Wed Mar 20, 2019 4:38 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1221

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

@flaviojunior I did it by router mark mangle and then set "routes" based on that. I added a large image above. If you understand what I did maybe you can tell me if I can improve or simplify anything. On last step I made each computer be a server on separate ISP connection, and was much easier than...
by flaviojunior
Wed Mar 20, 2019 4:29 pm
Forum: Beginner Basics
Topic: RB4011iGS - Use of a /29 IP Block over PPPOe (OVH ISP)
Replies: 2
Views: 211

Re: RB4011iGS - Use of a /29 IP Block over PPPOe (OVH ISP)

The problem is that you are Natting the traffic to the computer, and filtering it from the WAN. And put the rule in the top of the firewall. So what you need to do is. /ip firewall filter add action=accept chain=forward dst-address=109.xxx.yyy.zz0/29 place-before=0 /ip firewall filter add action=acc...
by flaviojunior
Wed Mar 20, 2019 4:15 pm
Forum: Beginner Basics
Topic: Any way to scan for *anything* on the LAN? [SOLVED]
Replies: 4
Views: 398

Re: Any way to scan for *anything* on the LAN? [SOLVED]

Thanks. Maybe it is a stupid Q, but is there a way to do the same on normal Mac ethernet port (in macOS)? Other soltuion is to cary a small ROS device with me to check - are there any battery powered? https://mikrotik.com/product/RBmAPL-2nD https://mikrotik.com/product/RBmAP2nD This two devices con...
by flaviojunior
Wed Mar 20, 2019 4:05 pm
Forum: Beginner Basics
Topic: [Help] Access Bridged GPON modem in front of Mikrotik
Replies: 16
Views: 880

Re: [Help] Access Bridged GPON modem in front of Mikrotik

I have a hap ac router. My ISP run internet and IPTV on VLAN. I configured mikrotik run pppoe on VLAN on eth1 which is connect to LAN port of the GPON modem, GPON modem turn in to bridge mode. The IP address of 2 devices are: Mikrotik: 100.10.10.0/24 GPON Modem: 192.168.1.1 Now I want to access GPO...
by flaviojunior
Wed Mar 20, 2019 3:45 pm
Forum: Beginner Basics
Topic: Problem: Same mac address reserving more than one IP
Replies: 2
Views: 226

Re: Problem: Same mac address reserving more than one IP

Look on the 750 log, and see if there is some log of loop.
Probably it's a loop.

If you can send us a Export of all routers and a diagram how it's done we can help you more. :D
by flaviojunior
Wed Mar 20, 2019 3:42 pm
Forum: Beginner Basics
Topic: mikrotik nat redirect to local from local
Replies: 2
Views: 267

Re: mikrotik nat redirect to local from local

Hey Since you're changing port number on the external and internal ip's you'll need to do "hairpin" construction. see https://wiki.mikrotik.com/wiki/Hairpin_NAT or search on forlum. So the probem is the answer of 10.0.0.2 to 10.0.0.3. Let me try to explain, 10.0.0.3 send the package to 1.1.1.1:444,...
by flaviojunior
Wed Mar 20, 2019 3:31 pm
Forum: Beginner Basics
Topic: Extending home network with additional mikrotik APs.
Replies: 6
Views: 662

Re: Extending home network with additional mikrotik APs.

Hi All, I have questions on this topic, we have a Mikrotik Capsman outside the houses and we wanted to extend the signal inside those houses but not using a Mikrotik but a dlink extender. 50 houses surrounded by Mikrotik WAPs and 25 of those we want to install dlink wifi extender. I want to know if...
by flaviojunior
Wed Mar 20, 2019 3:26 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1221

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

I was able to do it , now it is relatively simple after you do it a few times. I will setup some images and post details soon (maybe others need the same setup). Basically I need to - add "mangle / marking rules" on connections coming from each of my local computers, - under "routes" select the ISP...
by flaviojunior
Wed Mar 20, 2019 3:12 pm
Forum: Virtualization
Topic: Metarouter images
Replies: 365
Views: 241587

Re: Metarouter images

Any news about update MetaRouter on RouterOS? It's a very good feature that we can you to use Zabbix, PRTG........... and another thousands features all in one. I used QoS Reflector on PRTG, it's a script on python running on a linux that reflect UDP packages from PRTG and with it he calculate the Q...
by flaviojunior
Wed Mar 20, 2019 2:57 pm
Forum: Beginner Basics
Topic: RB3011UiAS-RM Speeds
Replies: 5
Views: 368

Re: RB3011UiAS-RM Speeds

Can you send a export of your Router?
So we can see what may happen, and help you.
:D
by flaviojunior
Thu Nov 17, 2016 6:31 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39196

Re: The Dude, v6.38rc test builds.

The changes with syslog are not good!!
We need to separete the log from each router and save the file for like one month!!
Return the syslog like it was is better.