For who are looking for a soluction on HotSpot page not been working on ROSv7, set the arp to enable, use reply-only with dhcp add arp for leases not work, probably a bug.

feature request: Administrator portal or customers menu as the old one. We have customers that manage their own hotspot and create vouchers to their clients, so they manage just the users of their hotspots, the new usermanger without the adminstrator portal can't do it, so I can't create a customer ...

IPSec has several problems with NAT, L2TP use IPSec too, if the client is before 2 NATs it doesn't work, PPTP is not secure anymore. The best option is to use OVPN or SSTP that works great on any network topology

Sent from my Vivo XI+ using Tapatalk

You should start by connecting to it and exporting current config ("/export hide-sensitive compact") and post it here, between <code> tags.[/quote]Hi, can you test the connectivity? If you area reaching the router. Try to ping. If you won't is that the point why you are not accessing it b...

Hi All I have applied this topic and all is working fine except speedtest.net I have error https://forum.mikrotik.com/viewtopic.php?f=13&t=108771&sid=330b13e70e1c5db8c5ae4c5ec29d4f6d when I disable it all is working the error pic is in attach Thanks for all Hi dear, there is no fault on the...

So, you could try to put the IP 192.169.1.2/24 on the Ethernet where you connect for pppoe. It probably works too, but be careful to not put the IP on the interface pppoe, it need to be on the Ethernet interface Sent from my Vivo XI+ using Tapatalk Yes, that is what I tried at first. But it is not ...

Hi megaman RouterOS can be installed in a X86 PC. The PC should have at least 1 network card so the software can be "usable". If you have a tplink router, you can bridge it (for example if it is a vdsl router) and connect a RouterOS behind it to to the PPPoE client and routing. I would re...

So, you could try to put the IP 192.169.1.2/24 on the Ethernet where you connect for pppoe. It probably works too, but be careful to not put the IP on the interface pppoe, it need to be on the Ethernet interface

Sent from my Vivo XI+ using Tapatalk

[edit] Just struck me ... I can see that you're running PPPoE client on vlan interface. Try to move 192.168.1.2 IP address from ether1-WAN to vlan35 interface and see if this makes any difference. Thanks again, I tried it too but it is not working. It stated the same unknown0. Let's try to help you...

So I'm not seen any issue of configurations. Now repeat the speed test with /tools profile open, this command will show you all the processes of the router and how much CPU it's consuming. Other important think it's to see on the interface if are getting TX or RX error. Show us the results :D Sent f...

@flaviojunior I did it by router mark mangle and then set "routes" based on that. I added a large image above. If you understand what I did maybe you can tell me if I can improve or simplify anything. On last step I made each computer be a server on separate ISP connection, and was much e...

The problem is that you are Natting the traffic to the computer, and filtering it from the WAN. And put the rule in the top of the firewall. So what you need to do is. /ip firewall filter add action=accept chain=forward dst-address=109.xxx.yyy.zz0/29 place-before=0 /ip firewall filter add action=acc...

Thanks. Maybe it is a stupid Q, but is there a way to do the same on normal Mac ethernet port (in macOS)? Other soltuion is to cary a small ROS device with me to check - are there any battery powered? https://mikrotik.com/product/RBmAPL-2nD https://mikrotik.com/product/RBmAP2nD This two devices con...

I have a hap ac router. My ISP run internet and IPTV on VLAN. I configured mikrotik run pppoe on VLAN on eth1 which is connect to LAN port of the GPON modem, GPON modem turn in to bridge mode. The IP address of 2 devices are: Mikrotik: 100.10.10.0/24 GPON Modem: 192.168.1.1 Now I want to access GPO...

Look on the 750 log, and see if there is some log of loop.
Probably it's a loop.

If you can send us a Export of all routers and a diagram how it's done we can help you more.

Hi All, I have questions on this topic, we have a Mikrotik Capsman outside the houses and we wanted to extend the signal inside those houses but not using a Mikrotik but a dlink extender. 50 houses surrounded by Mikrotik WAPs and 25 of those we want to install dlink wifi extender. I want to know if...

I was able to do it , now it is relatively simple after you do it a few times. I will setup some images and post details soon (maybe others need the same setup). Basically I need to - add "mangle / marking rules" on connections coming from each of my local computers, - under "routes&...

Any news about update MetaRouter on RouterOS? It's a very good feature that we can you to use Zabbix, PRTG........... and another thousands features all in one. I used QoS Reflector on PRTG, it's a script on python running on a linux that reflect UDP packages from PRTG and with it he calculate the Q...

Can you send a export of your Router?
So we can see what may happen, and help you.

The changes with syslog are not good!!
We need to separete the log from each router and save the file for like one month!!
Return the syslog like it was is better.