MikroTik

Lorzelek

ok, the .key file was missing to decrypt

It is working now.

thank you
Peter

Lorzelek

Hi, how to generate good certificates for openvpn on MT 3.0? I created certificates for OpenVPN on Linux box and they worked fine (based on openvpn howto page). In MT when I tried to enable openvpn client interface with selected cert I have error: couldn't add new interface - no ceritificate found (...

Lorzelek

Hi, I tested RB532 with MT 2.4.46 as a ipsec client end-point router connected to Linux router with Openswan. With md5/3des/modp1024 I had about 5,8Mbit/s and 100% CPU on RB532 (2.4.46). With md5/3des/modp1024 I had about 1,2-1,6Mbit/s and 100% CPU on RB532 (3.0rc5). So, something is wrong in 3.0rc5...

Lorzelek

>There was problem with Firewall rule that uses action=tarpit. We will fix > that in v2.9.25, you can wait till that.
>
>Regards,
>Uldis

it is fixed in 2.9.25 or not?

Lorzelek

Will the next release be as a .npk package for routerOS x86?
Having winblows station for Dude server is not good
Most of us have Linux servers and MT.

Lorzelek

I have the same problem with export do xml on client station

Lorzelek

From warfield:

under 5GHz:
5413 (saneo 8602) under MT 2.9.19 sees -90db noise and 5213 (sparklan) -100db

under 2,4GHz, saneo 8602 sees 2 APs, sparklan sees 12 APs

antennas checked, pigtail from card do antenna, w/o addtiotional cable.

Old 5213 - no problems
tested on 2 saneo (5413)

Lorzelek

fine, interval=5 works, but interval=0.05 not
in MT 2.8.x it worked

Lorzelek

why in console mode ping command not support interval parametr other than integer?
in winbox version of ping it is timeout option which I set for example to 100ms

in MT 2.8.x it worked
in MT 2.9.x not

Lorzelek

Once again:
Is this card supported by MT 2.9 in RB532:
http://hstnet.de/english/products/isdn/ ... /index.asp

Lorzelek

will be welcome (for clients with APCs)

Lorzelek

I have no value in noise level in 2,4G band with non-MT APCs. Is this correct?
In 5G band there is a noise level field available.
(MT 2.9.13 - rb500 version)

Lorzelek

hmm, so why other vendors of hardware APs (with atheros onboard) have noise level measurement (CA-8A, Proxim Tsunami, Osbridge5)?

Lorzelek

As I see we have new value in this version. Seeing noise on links will be great. When this option will be available in stable version?

great work!
Peter

Lorzelek

I have similar problem when hostname could not been resolve (fake dns or something)

Lorzelek

make a copy of "data" folder
try upgrade to last version
after upgrade, overwrite "data" folder with the "data" from backup

or try some versions from beta7 to beta9

i did it version on by one starting from beta3 and my map is still alive

good luck!

Lorzelek

pure linux or routeros will be the best as a server

Lorzelek

Someone tested cpu load on new version of MT?
Is version 2.9.7 or 2.9.8 has better performance on RB532 in oposite to 2.9.6?

Peter

Lorzelek

me too

w2k sys

Lorzelek

backup do xml in 0.1.beta7 and restore from xml in 0.1.beta9 did not work

so how to move data from previous version?

Lorzelek

make a copy of folder "data" in dude directory!

Lorzelek

I manualy copy the directory "data" from Dude before any upgrade

Maybe in next version Dude will have an option: backup configuration

Lorzelek

I have similiar error on Windows98se (2 diffrent computers)

Lorzelek

it happens only in secure or remote mode
via web it looks ok

Lorzelek

hello,

I set up nodes with MT icons etc. when logged as admin.
When I create user (only watch rights) I didn't see icons, only ip address.
All snmp oids are hidden, only links acctual bandwitch are visible.

Great work Gurus

Lorzelek

in last beta - if I set DNS to IP and revdns zones didn't work properly dudes.exe takes 99% of CPU and his configuration is lost

no one can log into dude server

if I set IP in discovery it works great

after that if I set name: name from address - dead

dudes.exe goes into loop

Lorzelek

in MT there is a command :resolve
but I want to get hostname+domain from ip address

Lorzelek

it is possible to get revdns names from ip on MT?

Lorzelek

after two restarts it works
my fault

sorry

Lorzelek

atheros always disabled, no supported-channels, in frequency no values

please help

Peter

Lorzelek

60Mbits at all, on 2 atheroses and prism
Third atheros with no traffic. I must make another station to test it.

I have on stations P133 with atheros so bandwidth test take them 100% of CPU in second

At now I have not enough powerfull stations to make more traffic.

Lorzelek

3 atheroses - channel separation 3 so: it's working fine with 5500, 5560, 5620 for example.
and forth card - prism

all in one base, in lab work stable
with nstreme and 60Mbit of traffic on 3 cards (2 atheroses, 1 prism, all in AP mode) and 20-50% cpu on cel 2,6

Lorzelek

ok, thanks to marksx, I choose channels to close

Lorzelek

I want to set up the base station with 3 sectors in AP mode. I want to use nstreme in all three ap. So I configure 3 atheroses as sect1, sect2, sect3 on diffrent channels (5640, 5660, 5680) and turn on nstreme. One station connects to sect1, other to sect2. Pings between station1 and station2 are ho...

Search found 34 matches

Re: ovpn can't support lzo compress?

Re: ovpn can't support lzo compress?

IPSec in 3.0rc5 vs 2.4.46 - low performance on rb532r5

RB532+RB502 - tarpit problem?

ping and interval option

SNR on Atheros in 2,4GHz band

Noise level on Atheros in 2,4GHz band

SNR value in 2.9.11 wireless-test

2.9.7 and 2.9.8 performance on rb532?

unpriviliged mode

bug - resolve revdns

resolve revdns

MT 2.9rc1 how to enable wireless on 24h-trial licence?

MultiAP on 3 atheroses