Community discussions

MikroTik App

Search found 50 matches

by mafiosa
Fri Jun 05, 2020 6:09 pm
Forum: RouterOS v7 BETA
Topic: v7.0beta8 [development] is released!
Replies: 86
Views: 15500

Re: v7.0beta8 [development] is released!

GRE tunnels don't seem to work! Sorry GRE works only the keepalive doesn't! After upgarding from v6.47 to v7beta 8 the tunnels stopped working. After reset same issue persists. WHen I turned off the keep alive it works fine. However the other end v6.47 works absolutely fine with keepalives on or off.
by mafiosa
Fri Jun 05, 2020 6:05 pm
Forum: RouterOS v7 BETA
Topic: v7.0beta8 [development] is released!
Replies: 86
Views: 15500

Re: v7.0beta8 [development] is released!

GRE tunnels don't seem to work!
by mafiosa
Fri Jun 05, 2020 12:36 am
Forum: RouterOS v7 BETA
Topic: ROSv7 documentation/ config guides
Replies: 6
Views: 1253

Re: ROSv7 documentation/ config guides

An example of eBGP multihop configuration would do.
by mafiosa
Thu Jun 04, 2020 11:26 pm
Forum: RouterOS v7 BETA
Topic: ROSv7 documentation/ config guides
Replies: 6
Views: 1253

ROSv7 documentation/ config guides

Where can I find ROSv7 documentation and configuration guide? Need to get bgp up in beta 8. Looking for documentation.
by mafiosa
Thu Jun 04, 2020 10:16 pm
Forum: RouterOS v7 BETA
Topic: v7.0beta8 [development] is released!
Replies: 86
Views: 15500

Re: v7.0beta8 [development] is released!

How do I get access to rosv7 documentation? Would be using on vultr vps for bgp. ROSv7 beta8 solves a lot of the issues that makes mikrotik usable.
by mafiosa
Wed Jun 03, 2020 12:21 pm
Forum: RouterOS v7 BETA
Topic: Enable BGP on ROSv7
Replies: 11
Views: 2874

Re: Enable BGP on ROSv7

It is not about the "worth" of connecting to the IX, its about the half baked nature of router OS.
by mafiosa
Mon Jun 01, 2020 8:34 pm
Forum: Forwarding Protocols
Topic: BGP supplied route marked unreachable
Replies: 8
Views: 2169

Re: BGP supplied route marked unreachable

So I can use the link local of eth1 interface as next hop using filter and remove the static route to the peer ip of vultr?
by mafiosa
Mon Jun 01, 2020 8:23 pm
Forum: Scripting
Topic: Fake IPv6 recursive nexthops
Replies: 2
Views: 1771

Re: Fake IPv6 recursive nexthops

Thanks +100
by mafiosa
Mon Jun 01, 2020 7:17 pm
Forum: Forwarding Protocols
Topic: BGP with Vultr not working
Replies: 0
Views: 172

BGP with Vultr not working

Anyone got BGP multihop working with vultr? Routes become unreachable. BGP routes have scope of 40 and target scope of 30. What should I set scope/target scope for my bgp peer ip in static route? Note: default route is automatically added using RA and no entry is found on routing table. Talking abou...
by mafiosa
Mon Jun 01, 2020 4:15 pm
Forum: Forwarding Protocols
Topic: BGP supplied route marked unreachable
Replies: 8
Views: 2169

Re: BGP supplied route marked unreachable

@mrz @savage I am facing same issue with vultr. Please help me.
by mafiosa
Wed May 20, 2020 11:04 pm
Forum: RouterOS v7 BETA
Topic: Enable BGP on ROSv7
Replies: 11
Views: 2874

Re: Enable BGP on ROSv7

Been waiting since November! No vxlan in rosv6. Need both vxlan and bgp.
by mafiosa
Wed May 20, 2020 10:59 pm
Forum: General
Topic: EoIP / gretap compatibility
Replies: 1
Views: 943

Re: EoIP / gretap compatibility

+1 for gretap. It is much required.
by mafiosa
Sun May 03, 2020 1:15 pm
Forum: RouterOS v7 BETA
Topic: IPv6 no link local address
Replies: 1
Views: 777

IPv6 no link local address

I cannot find ipv6 link local address in any ipv6 interface. Rebooting doesn't help too.
by mafiosa
Sat May 02, 2020 9:33 pm
Forum: General
Topic: IPv6 neighbor status=failed
Replies: 4
Views: 1071

Re: IPv6 neighbor status=failed

I too have this issue yet so solution! Mikrotik devices are so buggy! Will replace them soon with edgerouters.
by mafiosa
Sat May 02, 2020 9:28 pm
Forum: General
Topic: IPv6 neighbor status failed
Replies: 0
Views: 653

IPv6 neighbor status failed

I am terminating a vxlan on a mikrotik ros7. the vni is bridged with the an port. That port is connected to a hap ac2. on the hap ac2 port connected with the rosv7 routerboard, I add ipv4 (/24 mask) and ipv6 (/48 subnet) address. However, there is a strange problem! I can ping remote hosts within th...
by mafiosa
Sat May 02, 2020 3:58 pm
Forum: RouterOS v7 BETA
Topic: VxLAN example configuration
Replies: 6
Views: 4064

Re: VxLAN example configuration

can I use ipv6 over ipv4? that is vtep will be ipv4 but servers will communicate on ipv6.
by mafiosa
Tue Apr 28, 2020 12:33 am
Forum: RouterOS v7 BETA
Topic: Feature Request: GREtap
Replies: 8
Views: 1840

Feature Request: GREtap

Please add GREtap as it is widely accepted everywhere!
by mafiosa
Tue Apr 28, 2020 12:28 am
Forum: Forwarding Protocols
Topic: WE NEED EIGRP
Replies: 38
Views: 15655

Re: WE NEED EIGRP

+1 for EIGRP
by mafiosa
Tue Apr 28, 2020 12:24 am
Forum: RouterOS v7 BETA
Topic: Enable BGP on ROSv7
Replies: 11
Views: 2874

Enable BGP on ROSv7

Please enable BGP on ROSv7 as I need VXLAN to peer with 4IXP and EVIX. EOIP doesn't work behind 1:1 nat and gretap is not supported on ROS. Please enable BGP on ROSv7 as VXLAN is the only way to peer with them!
by mafiosa
Mon Apr 27, 2020 1:11 am
Forum: General
Topic: EOIP not working behind 1:1 nat
Replies: 1
Views: 767

EOIP not working behind 1:1 nat

Hello I can't get EOIP tunnel up for 4IXP. They provide VXLAN, EOIP and GREtap as connectivity medium. Mikrotik is becoming a poor decision it seems. Though GRE is working (not GREtap) EOIP tunnel never comes up. My isp provides me a static ip over 1:1 SNAT. Can someone tell me a way out of this mes...
by mafiosa
Tue Mar 31, 2020 9:37 pm
Forum: General
Topic: GRE tunnels don't work with PCC loadbalancing
Replies: 0
Views: 1465

GRE tunnels don't work with PCC loadbalancing

Hello, I am using pcc with dual WAN and port forwarding! However, I have gre tunnels with R3 over ISP1 and bgp running with r3 and r1. However, can you suggest me how should I modify PCC rules so that I can access routes learnt via BGP with R3 using vlan 100 and 200. R2 is a huawei ar1220. r1 and r3...
by mafiosa
Sat Jan 18, 2020 9:35 pm
Forum: RouterOS v7 BETA
Topic: SDWAN using Zerotier
Replies: 13
Views: 5754

SDWAN using Zerotier

Please implement some sort of SDWAN stuff. Zerotier can be a good start. Edge routers and openwrt have support for Zerotier!
by mafiosa
Fri Jun 01, 2018 4:51 pm
Forum: RouterBOARD hardware
Topic: RB3011 UiAS IPsec h/w acceleration and Openvpn UDP
Replies: 1
Views: 811

RB3011 UiAS IPsec h/w acceleration and Openvpn UDP

When will rb3011 get ipsec h/w acceleration. L2tp+ipsec is getting one core @ 100% with 60mbps throughput. Also it was promised in ROS 7 which is the unicorn which only Normis has seen. Also UDP openvpn is also missing!
by mafiosa
Sat Apr 21, 2018 3:55 pm
Forum: General
Topic: OpenVPN preshared key support! [Feature requet]
Replies: 0
Views: 410

OpenVPN preshared key support! [Feature requet]

Please for heaven sake implement 2 feature:
Openvpn UDP,
Openvpn pre-shared key!
As Normis said all ROS unicorn aka 7.0 features are being ported back! Please backport these features! need them badly.
by mafiosa
Mon Apr 09, 2018 5:40 pm
Forum: General
Topic: New router OS
Replies: 46
Views: 14543

Re: New router OS

Steve is right. There is barely anything left in v7 that we haven't backported. Please enable openvpn udp support and also ability to manually enter ip for ovpn tunnel in pop profile that can be used for bgp next hop resolution.These two bugs are stopping me from using mikrotik for my DN42 network.
by mafiosa
Wed Mar 28, 2018 7:57 pm
Forum: General
Topic: OPENVPN client interface routing
Replies: 1
Views: 437

Re: OPENVPN client interface routing

no one from this community can help? Mikrotik's openvpn implementation is so laughable.Seems like new alternatives need to be explored.
by mafiosa
Sun Mar 25, 2018 3:56 pm
Forum: General
Topic: OPENVPN client interface routing
Replies: 1
Views: 437

OPENVPN client interface routing

Hello! I have a DN42 network setup.First of all, I am really pissed with no udp support in openvpn. I own the internal ip block 172.22.146.0/25 I have peered with 2 peers.Here peering happens over openvpn links and BGP. peer 1 pushes me ip 172.22.146.1 and i add his ip 172.20.13.250 via ppp profile....
by mafiosa
Mon Feb 12, 2018 8:13 am
Forum: General
Topic: Openvpn client add wrong route
Replies: 5
Views: 2269

Re: Openvpn client add wrong route

Yes seems that the bug is still not solved.RouterOS is so buggy!
by mafiosa
Sat Nov 04, 2017 9:37 am
Forum: RouterBOARD hardware
Topic: 100mbps sfp with SGMII sfp transceiver!
Replies: 1
Views: 608

100mbps sfp with SGMII sfp transceiver!

Does RouterOS support SGMII sfps? These are 100mbps fiber sfps with gigabit connection with board.These are sfps with a phy build along with it.Main use of SGMII sfps is it works as a 100mbps fiber converter for gigabit only sfp cages. Anyone who can get me one to order? I found a brand called eopto...
by mafiosa
Sat Jul 08, 2017 1:34 pm
Forum: General
Topic: SGMII sfp support
Replies: 0
Views: 459

SGMII sfp support

Please add 100mbps sfp support and also confirm if ros supports sgmii sfp.
by mafiosa
Fri Jul 07, 2017 5:50 pm
Forum: RouterBOARD hardware
Topic: SGMII SFP interface support in RouterOS?
Replies: 0
Views: 384

SGMII SFP interface support in RouterOS?

Does RouterOS support SGMII sfps? These are 100mbps fiber sfps with gigabit connection with board.These are sfps with a phy build along with it.Main use of SGMII sfps is it works as a 100mbps fiber converter for gigabit only sfp cages.
by mafiosa
Fri Jul 07, 2017 5:10 pm
Forum: RouterBOARD hardware
Topic: SGMII SFP interface support in RouterOS?
Replies: 0
Views: 319

SGMII SFP interface support in RouterOS?

Does RouterOS support SGMII sfps? These are 100mbps fiber sfps with gigabit connection with board.These are sfps with a phy build along with it.Main use of SGMII sfps is it works as a 100mbps fiber converter for gigabit only sfp cages.
by mafiosa
Fri Jul 07, 2017 12:06 pm
Forum: RouterBOARD hardware
Topic: 100mbps sfp support for Routerboards! Finally a ray of hope.
Replies: 6
Views: 1445

Re: 100mbps sfp support for Routerboards! Finally a ray of hope.

You should be good to go - the 3011 has the IPQ-8064, which supports SGMII.
Now I can't find Bidi sgmii sfps! Most are out of stock.If you can find then please tell me.1550tx/1310rx single mode single fiber
by mafiosa
Fri Jul 07, 2017 12:04 pm
Forum: RouterBOARD hardware
Topic: 100mbps sfp support for Routerboards! Finally a ray of hope.
Replies: 6
Views: 1445

Re: 100mbps sfp support for Routerboards! Finally a ray of hope.

Have you seen this thread: viewtopic.php?f=2&t=122298#p606404
How is it relevant to sgmii sfp?
by mafiosa
Thu Jul 06, 2017 11:15 am
Forum: RouterBOARD hardware
Topic: 100mbps sfp support for Routerboards! Finally a ray of hope.
Replies: 6
Views: 1445

Re: 100mbps sfp support for Routerboards! Finally a ray of hope.

While it depends on the switch chip, I believe all do.
What Mikrotik to you have?
Rb3011uias rm
by mafiosa
Thu Jul 06, 2017 10:08 am
Forum: RouterBOARD hardware
Topic: 100mbps sfp support for Routerboards! Finally a ray of hope.
Replies: 6
Views: 1445

100mbps sfp support for Routerboards! Finally a ray of hope.

So finally after days and months of looking for a 100mbps sfp module for mikrotik routerboards! Finally I have found a "special type" of sfp that does fiber at 100mbps but makes connection to board at 1G as per previous post.Its called SGMII sfps. http://www.eoptolink.com/products/sgmii-sfp Please c...
by mafiosa
Tue Jul 04, 2017 8:57 am
Forum: General
Topic: SFP1 dont work on RB2011UiAS-2HnD-IN
Replies: 7
Views: 2144

Re: SFP1 dont work on RB2011UiAS-2HnD-IN

Same problem with me.Kindly tell me did you find any compatible 100mbps sfp? I've contacted technician that used to work for ISP and he told me in private that it could be possible to use Mikrotik router as only router to ISP using sfp but that I would need confidential parameters to make that conn...
by mafiosa
Mon Jul 03, 2017 7:08 pm
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 101
Views: 61767

Re: SFP module

I am testing a pair of bidi SFPs. I get a link and also get traffic across the link (how may or reliable it is, I do not know), but these RB2011LS-INs are at loss as status of a sfp1 interface does always state: Auto Negotiation: done Rate: Unknown Full duplex is unchecked Some other items: PoE Out...
by mafiosa
Sun Jul 02, 2017 12:06 pm
Forum: General
Topic: SFP1 dont work on RB2011UiAS-2HnD-IN
Replies: 7
Views: 2144

Re: SFP1 dont work on RB2011UiAS-2HnD-IN

i'm bumping this question I have 100/100Mbit speed from my ISP and their FTTH modem-router is very bad and common options are locked so I need flexibility of my RB2011UiAS-2HnD-IN and was thinking of buying SFP module and connect RB2011 instead of ISPs modem-router - will that work? also are only S...
by mafiosa
Sun Jul 02, 2017 11:48 am
Forum: General
Topic: 100Mbps SFP in RB2011
Replies: 5
Views: 2125

Re: 100Mbps SFP in RB2011

In short - no, you need very specific SFP transceiver for that Long: SFP cage connection to CPU supports only 1,25G (1G) data transfer rates. So SFP transceiver must have support of 1,25G (1G) connection to board But it is possible to find SFP transceiver that do laser at 100Mbps, but supports 1G c...
by mafiosa
Sat Jun 10, 2017 12:14 pm
Forum: RouterBOARD hardware
Topic: Ethernet cable fault?
Replies: 3
Views: 566

Ethernet cable fault?

Is the cable faulty?
Cable test:
Status:NO LINK
normal / 0m
open / 93m
open / 95m
open / 91m
by mafiosa
Sun May 07, 2017 4:00 pm
Forum: RouterBOARD hardware
Topic: Ether2 always running even with cable unplugged
Replies: 3
Views: 684

Re: Ether2 always running even with cable unplugged

yes ether 5 is having ether 2 as master port.Is it the reason?
by mafiosa
Sun May 07, 2017 12:18 pm
Forum: RouterBOARD hardware
Topic: Ether2 always running even with cable unplugged
Replies: 3
Views: 684

Ether2 always running even with cable unplugged

I am facing a weird problem! My ether2 interface on my rb3011 is always showing running even when no cable is plugged in! I am on latest bugfix firmware.Can anyone hep me out.
by mafiosa
Fri Apr 14, 2017 10:45 am
Forum: RouterBOARD hardware
Topic: 100FX SFP working on RB2011UAS w/ ROS 6.3 !!
Replies: 5
Views: 3499

Re: 100FX SFP working on RB2011UAS w/ ROS 6.3 !!

Can anyone find a custom sfp with 1.2G link to the board and 100mbps optics? I think that would surely work!
by mafiosa
Tue Apr 11, 2017 8:03 pm
Forum: Virtualization
Topic: CHR or CCR1036 12G 4S
Replies: 4
Views: 2623

CHR or CCR1036 12G 4S

Please help me decide!!!! I want to replace pfsense as our core router/firewall with mikrotik. I am confused whether to go with CCR1036 12G 4S or CHR p1 license and a server.Our main requirements are: 1. 50-60 pcs spread over 5 subnets. 2. Campus wifi usermanager for 500 user base but 60-100 max act...
by mafiosa
Tue Apr 11, 2017 8:02 pm
Forum: General
Topic: CHR or CCR1036 12G 4S
Replies: 1
Views: 413

CHR or CCR1036 12G 4S

Please help me decide!!!! I want to replace pfsense as our core router/firewall with mikrotik. I am confused whether to go with CCR1036 12G 4S or CHR p1 license and a server.Our main requirements are: 1. 50-60 pcs spread over 5 subnets. 2. Campus wifi usermanager for 500 user base but 60-100 max act...
by mafiosa
Sun Apr 09, 2017 10:47 am
Forum: General
Topic: Allow Only youtube in one subnet and all the internet in the other
Replies: 0
Views: 328

Allow Only youtube in one subnet and all the internet in the other

I am planning to start a free youtube only hotspot in my locality.I have multiple networks on my router.I want to allow only youtube.com i have the two ip blocks that I want to allow i.e., 216.x.xxx.xx/19 and my ISP's GGC 202.78.242.xx/24.How do I do that without web proxy?
by mafiosa
Tue Apr 04, 2017 4:40 pm
Forum: Forwarding Protocols
Topic: Team cymru bogon BGP peer help
Replies: 0
Views: 513

Team cymru bogon BGP peer help

our isp uses private ip addresses.However when we login we get a public ip dynamically assigned.I have a static ip 150.129.xx.xxx as my public ip.I just out of curiosity want to configue a bgp instance and peer with team cymru.I use the private AS65515. As per an email conversation team cymru provid...
by mafiosa
Mon Apr 03, 2017 2:45 pm
Forum: General
Topic: PCC with Dual LAN
Replies: 0
Views: 269

PCC with Dual LAN

I have 2 lan networks 192.168.23.0/24 and 192.168.11.0/24 and 2 wans 172.16.34.254/26 and 192.168.168.5/29 . Someone please tell me what mangles should I use? please help me out.
by mafiosa
Fri Dec 09, 2016 8:17 pm
Forum: RouterBOARD hardware
Topic: Rb2011UIAS-rm
Replies: 0
Views: 350

Rb2011UIAS-rm

I have purchased it.My ISP provides connection via 10/100 MROtek unmanaged media converters (WDM). Media converter at my end is 1550tx/1310rx.Will I be able to use a1.25G sfp to replace the media converter at my end?Internet connection speeds about 60mbps.ISP is very stubbon and won't change to sfp ...