Community discussions

MikroTik App

Search found 321 matches

  • 1
  • 2
by mafiosa
Sun Jun 25, 2023 8:21 pm
Forum: RouterOS beta
Topic: FEATURE REQUEST: full cone NAT
Replies: 291
Views: 38948

Re: FEATURE REQUEST: full cone NAT

Bugtik
by mafiosa
Thu Jun 15, 2023 3:15 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 369
Views: 128266

Re: v7.10 [stable] is released!

Upgraded Rb5009 non poe. Seems to be working fine.
by mafiosa
Tue Feb 28, 2023 7:32 am
Forum: RouterOS beta
Topic: BGP for IPv6 not working in vultr
Replies: 8
Views: 2934

Re: BGP for IPv6 not working in vultr

No complete answers as usual. Just like their incomplete routing stack.
by mafiosa
Mon Feb 27, 2023 2:02 pm
Forum: RouterOS beta
Topic: BGP for IPv6 not working in vultr
Replies: 8
Views: 2934

Re: BGP for IPv6 not working in vultr

not enough information. If it is multihop bgp then probably you need to adjust scopes to recursively resolve the gateways of BGP routes. Yes it is multihop BGP. I have two queries: 1. What should I set the next hop to for the BGP peer route as default gateway is leant via RA? Should it be the link ...
by mafiosa
Mon Feb 27, 2023 1:36 pm
Forum: RouterOS beta
Topic: BGP for IPv6 not working in vultr
Replies: 8
Views: 2934

Re: BGP for IPv6 not working in vultr

Check if "stable" 7.8 fix the problem.
No it doesn't has any fix related to this. Is CHR not supposed to work with Vultr for BGP?
by mafiosa
Mon Feb 27, 2023 1:14 pm
Forum: RouterOS beta
Topic: BGP for IPv6 not working in vultr
Replies: 8
Views: 2934

BGP for IPv6 not working in vultr

Hello! I am trying to set up bgp for IPv6 on vultr. However all the routes are marked as unreachable or invalid. Is there any way to resolve this? Using v7.8RC3.
by mafiosa
Mon Feb 27, 2023 7:14 am
Forum: Forwarding Protocols
Topic: BGP for IPv6 not working in vultr
Replies: 0
Views: 1791

BGP for IPv6 not working in vultr

Hello! I am trying to set up bgp for IPv6 on vultr. However all the routes are marked as unreachable or invalid. Is there any way to resolve this? Using v7.8RC3.
by mafiosa
Fri Dec 16, 2022 10:29 am
Forum: RouterOS beta
Topic: BGP resend bug
Replies: 5
Views: 2507

BGP resend bug

When using resend option in BGP it stops the session. When will bugtik ream fix this? 1 year since v7 stable was released they still don't have a fully functioning BGP. Prefix count still doesn't work.
by mafiosa
Thu Nov 03, 2022 3:16 pm
Forum: RouterOS beta
Topic: BGP Loadbalancing over two interfaces
Replies: 1
Views: 2052

Re: BGP Loadbalancing over two interfaces

can no one confirm?
by mafiosa
Tue Nov 01, 2022 8:08 pm
Forum: RouterOS beta
Topic: BGP Loadbalancing over two interfaces
Replies: 1
Views: 2052

BGP Loadbalancing over two interfaces

Is this guide valid for v7 ? I want to loadbalance over eBGP using this guide: https://wiki.mikrotik.com/wiki/Manual:B ... interfaces . If any new guide is available the please share the link.
by mafiosa
Sat Oct 22, 2022 10:58 am
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 141844

Re: v7.6 [stable] is released!

Till now, I never have a single problem with netinstall on old / new computers, if the OS is correctly configured, and netinstall correctly configured and used. Offtopic: Good to see your powers clipped. Simping for mikrotik and telling that all bugs or missing features are user's fault doesn't hel...
by mafiosa
Wed Oct 05, 2022 3:14 pm
Forum: Announcements
Topic: v7.6rc is released!
Replies: 94
Views: 28033

Re: v7.6rc is released!

Updated RB5099 from 7.6 beta 10 without issues. DNS was not resolving so manually had to add the packages.
by mafiosa
Thu Sep 15, 2022 11:04 pm
Forum: General
Topic: IKEv2 mtu issue
Replies: 38
Views: 2885

Re: IKEv2 mtu issue

I am also facing another issue. Whenever I am trying to access an webserver on my lan via IP it shows the webserver that has port 80 forwareded to it. This is only for remote users using VPN. Apps work well, google yeilds search results yet 90% websites don't load. I am sharing the config: /ip ipsec...
by mafiosa
Wed Sep 14, 2022 9:20 pm
Forum: General
Topic: IKEv2 mtu issue
Replies: 38
Views: 2885

IKEv2 mtu issue

It seems like mtu is broken on IKEv2. My isp provides connection via PPPoE with MUT of 1460. How do I overcome this broke mtu issue as I am having huge issues in website loading over VPN.
by mafiosa
Wed Aug 24, 2022 1:53 pm
Forum: Announcements
Topic: v7.5rc is released!
Replies: 86
Views: 20814

Re: v7.5rc is released!

We are running ...
I want to join it. How do I join? I have an amprnet allocation.
by mafiosa
Tue Aug 23, 2022 9:51 am
Forum: Announcements
Topic: v7.5rc is released!
Replies: 86
Views: 20814

Re: v7.5rc is released!

RB5009 upgraded without issue. Looking forward for more bgp related fixes.Uptime still showing 497 days for bgp sessions.
by mafiosa
Thu Aug 18, 2022 10:08 pm
Forum: RouterOS beta
Topic: v7 PCC Load balancing on PPPoE WAN
Replies: 1
Views: 2623

v7 PCC Load balancing on PPPoE WAN

How do I modify the first two mangle rules? I have two PPPoE WAN addresses.
https://help.mikrotik.com/docs/display/ ... mple3(PCC)
by mafiosa
Fri Aug 05, 2022 11:31 am
Forum: Announcements
Topic: v7.5beta [testing] is released!
Replies: 138
Views: 45583

Re: v7.5beta [testing] is released!

Any Chance of Adding Advertisements in BGP Option. Really Useful to Check what is getting Advertised to peers.
Currently in ROSv7 its very difficult to find our the Advertisements compared to ROSv6.

Please Mikrotik Team Look in to it....
+1
by mafiosa
Thu Aug 04, 2022 3:17 pm
Forum: RouterOS beta
Topic: Redistribute other ospf equivalent in v7
Replies: 2
Views: 2149

Re: Redistribute other ospf equivalent in v7

Same as in v6. Is the redistribute=ospf not working? No! I have set up in the following way: /routing id add disabled=no name=Home-Router-ID select-dynamic-id=only-loopback \ select-from-vrf=Home /routing ospf instance add disabled=no name=ospf-v2 redistribute=connected,ospf router-id=main \ versio...
by mafiosa
Thu Aug 04, 2022 1:48 pm
Forum: RouterOS beta
Topic: Redistribute other ospf equivalent in v7
Replies: 2
Views: 2149

Redistribute other ospf equivalent in v7

What is the equivalent of redistribute other ospf in v7? I want to redistribute routes between two ospf instances on the same router.
by mafiosa
Thu Aug 04, 2022 1:24 pm
Forum: RouterOS beta
Topic: Leaking ospf routes between VRFs
Replies: 4
Views: 2383

Re: Leaking ospf routes between VRFs

????? no guide or example?
by mafiosa
Wed Aug 03, 2022 3:56 pm
Forum: RouterOS beta
Topic: Leaking ospf routes between VRFs
Replies: 4
Views: 2383

Re: Leaking ospf routes between VRFs

You can try two OSPF instances and redistribute routes from one instance to another.
A simple config example would be really helpful.
by mafiosa
Tue Aug 02, 2022 6:50 am
Forum: RouterOS beta
Topic: Leaking ospf routes between VRFs
Replies: 4
Views: 2383

Leaking ospf routes between VRFs

Is there any guide for leaking routes learnt from OSPF on VRF A to VRF B?
by mafiosa
Fri Jul 29, 2022 2:39 pm
Forum: RouterOS beta
Topic: What's coming soon?
Replies: 14
Views: 3579

What's coming soon?

Mikrotik has recently teased on twitter that something new is coming soon. What could it be? Function parity of BGP with v6 or BFD?
by mafiosa
Tue Jul 26, 2022 10:14 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 160172

Re: v7.1rc3 adds Docker (TM) compatible container support

tun/tap support will be added in next release. Anything else to consider adding before stable release?
Yes a working guide for an MDNS repeater container
by mafiosa
Mon Jul 25, 2022 2:14 pm
Forum: Forwarding Protocols
Topic: How to do a simple Inter VRF route leak?
Replies: 5
Views: 3097

Re: How to do a simple Inter VRF route leak?

Thanks. However, I cannot use gre tunnel on VRF. The GRE tunnel itself (i.e. the traffic transported through it) can be part of a VRF, but the "outside" of the tunnel (the tunnel local and remote address) cannot. That is a limitation of RouterOS. Everytime I wanna try something new a ROS ...
by mafiosa
Mon Jul 25, 2022 11:50 am
Forum: Forwarding Protocols
Topic: How to do a simple Inter VRF route leak?
Replies: 5
Views: 3097

Re: How to do a simple Inter VRF route leak?

/routing rule add action=lookup-only-in-table disabled=no dst-address=192.168.72.0/23 table=A /ip route add disabled=no distance=1 dst-address=192.168.23.0/24 gateway=<interface> routing-table=A add disabled=no distance=1 dst-address=192.168.24.0/24 gateway=<interface> routing-table=A replace <inte...
by mafiosa
Sun Jul 24, 2022 11:43 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12301

Re: v7 inter VRF route leak doesn't work for local IPs

Hi, A static route to a different VRF doesn't seem to work when pointing to local IP. I'm trying to reach the loopback 10.0.0.1 which is in vrf2 from the main vrf, but there is no response : [admin@MikroTik] > ping 10.0.0.1 vrf=main SEQ HOST SIZE TTL TIME STATUS 0 10.0.0.1 timeout 1 10.0.0.1 timeou...
by mafiosa
Sun Jul 24, 2022 7:55 pm
Forum: Forwarding Protocols
Topic: How to do a simple Inter VRF route leak?
Replies: 5
Views: 3097

How to do a simple Inter VRF route leak?

I have two networks 192.168.23.0/24 and 192.168.24.0/24 on main routing table and 192.168.72.0/23 on VRF say A on my rb5009 . How do I perform inter vrf route leak on the router on v7 without using mangle?
by mafiosa
Sun Jul 24, 2022 4:48 pm
Forum: Forwarding Protocols
Topic: GRE over VRF
Replies: 0
Views: 1267

GRE over VRF

I have 3 ISP connections. I have a main routing table and a VRF. VRF is used for GRE tunnels. I am unable to get the GRE tunnel running on v7.4 stable. Is there any workaround to get it done? I am sharing my config too. # jul/24/2022 19:14:31 by RouterOS 7.4 # software id = 5BN5-KMF2 # # model = RB5...
by mafiosa
Wed Jul 20, 2022 11:56 am
Forum: Announcements
Topic: v7.4 [stable] is released!
Replies: 226
Views: 54610

Re: v7.4 [stable] is released!

As usual no changes in BGP. Will wait for 7 days before upgrading because last time they screwed up 7.3
by mafiosa
Wed Jul 06, 2022 3:37 pm
Forum: Announcements
Topic: v7.4rc is released!
Replies: 116
Views: 29622

Re: v7.4rc1 is released!

GRE tunnel is broken. v7.4 rc1 on both ends between RB5009 and HAP AC^2
by mafiosa
Tue Jun 21, 2022 1:11 pm
Forum: RouterOS beta
Topic: Wireguard speed capped at 25-30mbps
Replies: 9
Views: 4050

Re: Wireguard speed capped at 25-30mbps

I actualy noticed the same thing from my phone can't get more then 20mbit with 4011 on other side and s21 ultra as client, also same version routerOS, gona try older versions tomorow I tried about everything else today from changing MTU, completly disabling any firewall rules or queues, nothing mad...
by mafiosa
Mon Jun 20, 2022 10:01 pm
Forum: RouterOS beta
Topic: Wireguard speed capped at 25-30mbps
Replies: 9
Views: 4050

Wireguard speed capped at 25-30mbps

Hello! I am using rb5009 and hap ac^2 with v7.4 beta 4. I have a site 2 site wireguard tunnel. However, I am unable to route traffic through the tunnel at more than 25-30mbps. I have enabled fasttrack. Also both end cpu utilization is max at 10%. Does wireguard require any tuning when using on route...
by mafiosa
Sat Jun 18, 2022 4:42 pm
Forum: Containers
Topic: Container for mDNS repeater
Replies: 9
Views: 7062

Container for mDNS repeater

Can someone post the steps to get a working mDNS repeater using v7.4 beta 4 containers?
by mafiosa
Thu Jun 16, 2022 6:28 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 160172

Re: v7.1rc3 adds Docker (TM) compatible container support

Container is released in v7.4 beta 4
by mafiosa
Tue Jun 14, 2022 8:14 pm
Forum: RouterOS beta
Topic: clickbait: v7.4beta Docker container support
Replies: 9
Views: 3301

Re: clickbait: v7.4beta Docker container support

As confirmed by tik support, container work is almost over and it is going to be released really soon.
by mafiosa
Sun Jun 12, 2022 10:26 pm
Forum: General
Topic: RB3011UiAS-RM - max. 240 Mbit/s [SOLVED]
Replies: 7
Views: 2795

Re: RB3011UiAS-RM - max. 240 Mbit/s [SOLVED]

Solved:
1. removed Mangle Rules - only testing
2. set up fasttrack connection in fw rules !
If you disable mangles then you can't do PCC loadbalancing. It defeats my purpose.
by mafiosa
Sat Jun 11, 2022 7:24 pm
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 79533

Re: v7.3 and v7.3.1 [stable] is released!

RB3011 still suffers from a massive performance penalty with v7 compared to v6 (other devices are fine).
Will that ever get fixed?
No they have asked me to upgrade to a more powerful device. So I bought an RB5009. Also rb3011 started to perform worse than HAP AC^2 for the exact same config.
by mafiosa
Tue Jun 07, 2022 7:53 pm
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 79533

Re: v7.3 [stable] is released!

*) ovpn - fixed hardware offloading support on CHR;
What are conditions to use this feature? I have AES passed to CHR and no HW flag in OVPN server clients. Is there any documentation to this?

Thank you
Set your chr vm cpu setting to host
by mafiosa
Wed Jun 01, 2022 7:42 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3rc [testing] is released!

What I have realized is that Mikrotik is good from small to mid size networks and our goal should be to replace mikrotik from our network as soon as our network starts to grow. No proper feature list or any roadmap. Everything bug spotted we get the same reply "we have been able to reproduce th...
by mafiosa
Tue May 31, 2022 8:23 am
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

What's new in 7.3beta40 (2022-May-11 12:18):

it''s been 2 weeks after last release, waiting for the next release.
It could be today or this week itself.
by mafiosa
Thu May 19, 2022 11:04 am
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

Please Solve issue of PPP Accounting of not sending IPv6 PD in radius accounting packet.............. Because of this we are unable to implement IPv6 in our network Soon you will find certain forum gurus reply to your post that why you don't need PPP Accounting of sending IPv6 PD in radius accounti...
by mafiosa
Mon May 16, 2022 11:03 pm
Forum: RouterOS beta
Topic: PPPoE disconnected doesn't dial up auomatically
Replies: 9
Views: 3696

Re: PPPoE disconnected doesn't dial up auomatically

Here are the attachments.
by mafiosa
Mon May 16, 2022 9:05 pm
Forum: RouterOS beta
Topic: PPPoE disconnected doesn't dial up auomatically
Replies: 9
Views: 3696

Re: PPPoE disconnected doesn't dial up auomatically

The pppoe tunnel, should and will go up as long as the pppoe server responds to the discovery messages of the pppoe client and all the stages get completed successfully. https://wiki.mikrotik.com/wiki/Manual:Interface/PPPoE#PPPoE_Operation Yes but that should put the pppoe interface into connecting...
by mafiosa
Mon May 16, 2022 9:04 pm
Forum: RouterOS beta
Topic: PPPoE disconnected doesn't dial up auomatically
Replies: 9
Views: 3696

Re: PPPoE disconnected doesn't dial up auomatically

I don't believe you.
Proof?
You want me to disrupt the connection to show you proof?
by mafiosa
Mon May 16, 2022 6:09 pm
Forum: RouterOS beta
Topic: PPPoE disconnected doesn't dial up auomatically
Replies: 9
Views: 3696

PPPoE disconnected doesn't dial up auomatically

I am using RB5009 with PPPoE. If by any chance the link to an intermediate switch fails and comes back the pppoe doesn't dial up automatically. The state of the PPPoE interface is disconnected.
by mafiosa
Thu May 12, 2022 10:34 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 160172

Re: v7.1rc3 adds Docker (TM) compatible container support

Hopefully 7.3
maybe 7.3 rc wil get it to!
by mafiosa
Thu May 12, 2022 9:24 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 160172

Re: v7.1rc3 adds Docker (TM) compatible container support

We added a much easier way to install containers, similar to docker pull. It will be worth the wait
Any ETA?
by mafiosa
Mon May 09, 2022 1:36 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

Expecting a new release today.
by mafiosa
Wed May 04, 2022 6:40 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

Re: mDNS repeater feature

Use Alexa devices...
From my Office I can control devices at my Home (different cities and networks) with vocal commands... :lol:
You will suggest everything else to prove that mikrotik doesn't need to implement mDNS. Such a simp!
by mafiosa
Mon May 02, 2022 3:30 pm
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 79841

Re: v7.2.2 [stable] is released!

Does this have all the fixes from v7.3 beta 37?
by mafiosa
Tue Apr 26, 2022 6:22 pm
Forum: RouterOS beta
Topic: Torch is not working on bridge interface.
Replies: 2
Views: 2719

Torch is not working on bridge interface.

Torch is not working on bridge with VLAN filtering enabled. Cannot see any traffic on enabling torch on the bridge interface. Using RB5009 v7.3 beta 37 same issue with 33 and 34
by mafiosa
Tue Apr 26, 2022 10:24 am
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

Everyone , thank you very much for all the input regarding the configuration loss problem. For your reports in the forum and support tickets. By putting our heads together and combining all of your reports we managed to reproduce this problem and seems that we have resolved it. The fix is included ...
by mafiosa
Tue Apr 19, 2022 11:16 pm
Forum: Forwarding Protocols
Topic: BGP Peering Assistance - Prepending AS
Replies: 3
Views: 1228

Re: BGP Peering Assistance - Prepending AS

Set a rule with if dst in <ipv4 address list> set bgp-prepend 3
by mafiosa
Sun Apr 17, 2022 10:53 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

Which device are you using?
by mafiosa
Thu Apr 14, 2022 7:19 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

Any RB5009 owners updated?
Yup but why?
by mafiosa
Thu Apr 14, 2022 11:10 am
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

You are missing the point, should we stop working on these features then just to implement prefix counter to show up in BGP session? You are willing to tolerate BGP crashes that we could fix instead of possibility to get a counter in a specific manner? You already can get prefix count with methods ...
by mafiosa
Wed Apr 13, 2022 8:46 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

How do you think where the fixes for 7.2.1 were tested? :)
[/quote]
Did you know that you can send me testing images for testing?
by mafiosa
Wed Apr 13, 2022 8:19 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

RB5009 still does not show cpu type in /system/resources. Also after every reboot VxLAN Mac address changes.
by mafiosa
Wed Apr 13, 2022 8:12 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

*) torch - properly capture all related IPv6 traffic;
Thanks a ton. However please refer to SUP-78389. @normis @emilis @edpa
by mafiosa
Wed Apr 13, 2022 8:04 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 101207

Re: v7.3beta [testing] is released!

Beta 33? Out of the world version numbering.
by mafiosa
Mon Apr 11, 2022 3:55 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60126

Re: v7.2 is released!

@mrz @normis next release please fix vxlan mac changing after every reboot.
by mafiosa
Fri Apr 08, 2022 8:36 pm
Forum: General
Topic: EOIP not working behind SNAT on IPACCT NAS
Replies: 4
Views: 864

Re: EOIP not working behind SNAT on IPACCT NAS

Still EoIP doesn't work even if one endpoint is behind IPACCT based ISP NAS.
by mafiosa
Wed Apr 06, 2022 3:32 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60126

Re: v7.2 is released!

Why does RB5009 not show cpu type in system>resources
by mafiosa
Tue Apr 05, 2022 8:48 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60126

Re: v7.2 is released!

It is time that we have IPv6 torch functionality working. It is a very basic thing.
by mafiosa
Tue Apr 05, 2022 12:29 pm
Forum: RouterOS beta
Topic: Torch not working for IPv6 traffic
Replies: 3
Views: 3129

Re: Torch not working for IPv6 traffic

Life is a lot harder to debug IPv6 without torch. Please implement it ASAP. It has been almost 5 months since 7.1 was released. It is a very basic feature and something that was already implemented in v6. I have RB5009 so keep the blabbering of "just move to v6" to yourself.
by mafiosa
Wed Mar 30, 2022 9:20 pm
Forum: Announcements
Topic: v7.2rc6 and v7.2rc7 is released!
Replies: 100
Views: 19655

Re: v7.2rc6 is released!

which one of all that is an issue?
CPU not running at default frequency.
by mafiosa
Wed Mar 30, 2022 9:00 pm
Forum: Announcements
Topic: v7.2rc6 and v7.2rc7 is released!
Replies: 100
Views: 19655

Re: v7.2rc6 is released!

Why am I getting this issue on RB5009? WARNING!!! This router belongs to AS213326 - Kalpak Mukhopdhyay Network Lab. ... mar/30/2022 10:18:22 system,info,critical cpu not running at default frequency mar/30/2022 10:20:40 system,info,critical cpu not running at default frequency mar/30/2022 10:20:40 s...
by mafiosa
Thu Mar 24, 2022 7:29 pm
Forum: General
Topic: Help! 3011 Capped at 150Mbps
Replies: 9
Views: 1856

Re: Help! 3011 Capped at 150Mbps

I was also finding poor throughput about 210mbps max with 86%+ utilization. Same config with HAP AC^2 would give same throughput with 27% max cpu utilization. I have upgraded to RB5009 as mikrotik support said thats the best we can get from RB3011 on v7.
by mafiosa
Tue Mar 22, 2022 3:32 pm
Forum: Announcements
Topic: v7.1.4 and v7.1.5 is released!
Replies: 202
Views: 38890

Re: v7.1.4 is released!

Eagerly waiting for /routing/bgp/advertisements print command equivalent and IPv6 torch functionality.
by mafiosa
Tue Mar 22, 2022 12:40 pm
Forum: Announcements
Topic: v7.1.4 and v7.1.5 is released!
Replies: 202
Views: 38890

Re: v7.1.4 is released!

Currently using v7.99 (internal test image) on RB5009, shall I upgrade? Random crashing issue was not fixed by the test image.
by mafiosa
Sun Mar 20, 2022 4:41 pm
Forum: RouterOS beta
Topic: RB5009 crash after logging in via public IP from LAN side.
Replies: 0
Views: 1395

RB5009 crash after logging in via public IP from LAN side.

I have PPPoE dialup from router for WAN. When I connect via winbox/mikrotik pro app from LAN side via Public internet IP, after logging in I see high CPU utilization and crash after 5-10 mins. Happens even when using special test image from Mikrotik. The router is not even a week old.
by mafiosa
Thu Mar 17, 2022 6:51 pm
Forum: RouterOS beta
Topic: RB5009 reboots itself each 8-10 days (7.2rc3/rc4) [SOLVED]
Replies: 19
Views: 6115

Re: RB5009 reboots itself each 8-10 days (7.2rc3/rc4) [SOLVED]

Support provide me with v7.99 (some internal version) for testing.
by mafiosa
Wed Mar 16, 2022 1:28 pm
Forum: Announcements
Topic: v7.2rc4 is released!
Replies: 143
Views: 41622

Re: v7.2rc4 is released!

RB5009 crashed twice within 72 hours. Very tragic experience.
by mafiosa
Wed Mar 16, 2022 1:27 pm
Forum: RouterOS beta
Topic: RB5009 reboots itself each 8-10 days (7.2rc3/rc4) [SOLVED]
Replies: 19
Views: 6115

Re: RB5009 reboots itself each 8-10 days (7.2rc3/rc4) [SOLVED]

My new RB5009 crashed within two days of installation. v7.2RC4 even on v7.1.3 it was same. Opened ticket with Mikrotik support but I have no hope.
by mafiosa
Sun Mar 13, 2022 6:42 pm
Forum: RouterBOARD hardware
Topic: Rackmount kit for single RB5099
Replies: 1
Views: 700

Rackmount kit for single RB5099

Please suggest any rack mounting kit for a single RB5009. Can I use the one that mikrotik makes for a single rb5009?
by mafiosa
Sun Mar 13, 2022 2:20 pm
Forum: RouterOS beta
Topic: RB5009 reboots itself each 8-10 days (7.2rc3/rc4) [SOLVED]
Replies: 19
Views: 6115

Re: RB5009 reboots itself each 8-10 days (7.2rc3/rc4) [SOLVED]

Shit I just ordered an RB5009 yesterday
by mafiosa
Sat Mar 12, 2022 2:09 pm
Forum: RouterOS beta
Topic: RB5009 purchase decision
Replies: 3
Views: 4913

RB5009 purchase decision

I have placed an order for RB5009 to replace my RB3011. Is there any special version for ROSv7 for the same? Or should I run with the factory build image that comes preloaded? Last time I was an early adopter for RB3011 just 8 months post release I had bought it, same for this but will it be worth t...
by mafiosa
Tue Mar 01, 2022 4:45 pm
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 55654

Re: v7.1.3 is released!

Please look into fixing torch for IPv6. It's not working since long time.
by mafiosa
Mon Feb 21, 2022 9:38 pm
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 55654

Re: v7.1.3 is released!

IPv6 torch functionality still not working
by mafiosa
Mon Feb 21, 2022 8:41 pm
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 55654

Re: v7.1.3 is released!

PPPoE Client?
Yes
by mafiosa
Mon Feb 21, 2022 4:55 pm
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 55654

Re: v7.1.3 is released!

PPPoE MTU is still at 1480.
by mafiosa
Sat Feb 19, 2022 8:16 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 38614

Re: v7.1.2 is released!

PPPoE still at 1480 MTU
by mafiosa
Thu Feb 17, 2022 7:11 pm
Forum: Forwarding Protocols
Topic: CYRMU BGP peer on Router OS 7
Replies: 3
Views: 1685

Re: CYRMU BGP peer on Router OS 7

it would seem that the no-llgr option is located in the community-set filters as to it's proper use I have not a clue.

like so many things in v7 documentation on its correct use is lacking.
Are you using MD5 password? try to have a clear session as many QoS used by ISPs corrupt the MD5 password.
by mafiosa
Mon Feb 14, 2022 2:17 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 38614

Re: v7.1.2 is released!

IDK why mikrotik can't fix the god damn IPv6 torch function.
by mafiosa
Sun Jan 30, 2022 8:42 pm
Forum: Announcements
Topic: v7.2rc2 and v7.2rc3 is released!
Replies: 222
Views: 84682

Re: v7.2rc2 and v7.2rc3 is released!

@ Mafioso Please read through this and tell us where Torch is noted If you got this, far then clearly its not a case of : not having two clues and being lazy, - we can drop the lazy part. ;-P Look I think it's fair game to comment if the docs don't indicate something is broken. See https://help.mik...
by mafiosa
Sun Jan 30, 2022 2:53 pm
Forum: RouterOS beta
Topic: Torch not working for IPv6 traffic
Replies: 3
Views: 3129

Torch not working for IPv6 traffic

Torch for ipv6 is not working since v7.1 release. As usual Mikrotik doesn't acknowledge it.
by mafiosa
Sun Jan 30, 2022 1:52 pm
Forum: Announcements
Topic: v7.2rc2 and v7.2rc3 is released!
Replies: 222
Views: 84682

Re: v7.2rc2 and v7.2rc3 is released!

Torch for IPv6 still not working. Can anyone confirm?
by mafiosa
Sat Jan 29, 2022 9:08 pm
Forum: General
Topic: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour
Replies: 58
Views: 35951

Re: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour

[/quote]
Your comment is confusing...all of the "forum gurus" in this thread are advocating for mDNS to be added as far as I can tell.
[/quote]
Check my post on mDNS. It is flooded with such comments.
by mafiosa
Sat Jan 29, 2022 9:06 pm
Forum: Announcements
Topic: v7.2rc2 and v7.2rc3 is released!
Replies: 222
Views: 84682

Re: v7.2rc2 and v7.2rc3 is released!

Still CPU load not properly optimized for RB3011.
by mafiosa
Sat Jan 29, 2022 8:52 pm
Forum: General
Topic: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour
Replies: 58
Views: 35951

Re: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour

mDNS would be a great addition to enable things like chromecast between subnets. I don't know hwy certain forum 'gurus' actively defend mikrotik for not implementing it. Maybe they don't need this but a lot of us do. They will put up all sorts of reasons why it has not been implemented. Stop defend...
by mafiosa
Sat Jan 29, 2022 8:45 pm
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Re: Very high CPU usage on PCC Loadbalancing with 7.x

with v7.2RC3 the cpu utilization has reduced to 55-60% from 86%+ previously. However, a lot of work in optimizing throughput is required. I cannot get more that 270-300mbps on file transfer between two vlans.
by mafiosa
Sat Jan 29, 2022 8:37 pm
Forum: General
Topic: RB3011UiAS-RM - max. 240 Mbit/s [SOLVED]
Replies: 7
Views: 2795

Re: RB3011UiAS-RM - max. 240 Mbit/s [SOLVED]

Hello, working with an RB3011UiAS-RM with RouterOS v7.1.1 (same Firmware) I can't find the bottle neck - it's too slow ... The Internet Access is a DOCSIS Calbe Modem with fixed IPv4-Adresses to the inside (LAN). When I connect directly with my Apple Notebook, using the public IPv4 I get a download...
by mafiosa
Tue Jan 25, 2022 3:53 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

I am really pissed with Mikrotik, ...
If this pisses you off so much, why don't you downgrade your very important router to 6.49 and wait for v7 to stabilise enough to meet your operational demands?
Already downgraded but that doesn't justify them not answering the ticket.
by mafiosa
Tue Jan 25, 2022 1:40 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

I am really pissed with Mikrotik, opened a ticket on 12th Jan regarding high CPU utilization on RB3011. Sumitted supout.rif and all relevant info asked by them, no reply on the ticket till today.
https://help.mikrotik.com/servicedesk/s ... /SUP-71297
by mafiosa
Mon Jan 24, 2022 8:19 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

Only one Im have a high cpu load rb3011 with ros7.1.1 ? (x3 compared with ros6) one core processes IRQ full time! (100mbps Full Duplex static routing + queue) I am also having massive performance problems with the RB3011 and RouterOS v7. Other devices like HAP-AC2 or mAP do not suffer from this. No...
by mafiosa
Tue Jan 11, 2022 10:41 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

With RB3011 pcc with 140+ 105mbps eats 86% cpu with zero firewall just a scr nat rule. Earlier it used to go maximum 35% . Mikrotik is so broken and they don't even acknowledge the problem. Same config on hap ac^2 I am getting maximum 27% CPU utilisation.
by mafiosa
Sun Jan 09, 2022 6:10 pm
Forum: RouterOS beta
Topic: iBGP RR
Replies: 7
Views: 6918

Re: iBGP RR

I think you need to tick bgp in output.redistribute under extra tab in ibgp-rr router. Seriously, very poor documentation when they have made so many changes.
by mafiosa
Sun Jan 09, 2022 6:06 pm
Forum: Forwarding Protocols
Topic: mDNS equivalent using PIM
Replies: 1
Views: 2101

mDNS equivalent using PIM

Hello! As we know that mDNS repeater is not present in RouterOS. I have seen many forum gurus defending Mikrotik stating that it is not required and can easily be worked around with PIM. I would kindly request them to post a working example with two LANs example: 192.168.0.0/24 and 172.16.10.0/24 an...
by mafiosa
Sun Jan 09, 2022 4:26 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

they are just tables, you can use IPv4 and IPv6 routes with them. For adding IPv6 routes to a table other than main, you currently have to use the cli, winbox still doesn't show the routing-table parameter.
Thanks
by mafiosa
Sun Jan 09, 2022 10:02 am
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

Does RouterOS support multiple routing tables for IPv6?
by mafiosa
Wed Dec 29, 2021 6:42 pm
Forum: Announcements
Topic: v7.2rc1 is released!
Replies: 240
Views: 159320

Re: v7.2rc1 is released!

CPU utilization even in idle state is crazy on RB3011. Downgraded it to 7.1.1.
by mafiosa
Wed Dec 29, 2021 6:41 pm
Forum: RouterOS beta
Topic: BGP filters
Replies: 0
Views: 3823

BGP filters

Hello! I have 2x /44 network prefixes. I want to announce it as /44 to my 2 upstreams and as multiple /46 to my Internet Exchange Route Server. In that case making 2 address lists under ipv6 firewall as upstream-out and ix-out in bgp session output.networks along with matching blackhole routes in ro...
by mafiosa
Wed Dec 29, 2021 5:35 pm
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Re: Very high CPU usage on PCC Loadbalancing with 7.x

The other one is the impact of the absence of routing cache in v7, which has been mentioned multiple times here and there, but does not explain the difference in this topic.
Then why is ip route cache option present in ip>setting?
by mafiosa
Tue Dec 28, 2021 8:46 pm
Forum: RouterOS beta
Topic: PPPoE CPU utilization
Replies: 1
Views: 2736

PPPoE CPU utilization

Does mikrotik do PPPoE using software? Recently my ISP provided me PPPoE to test their IPv6 deployment. It seems that CPU utilization for the same traffic has increased by 15% when using PPPoE. It their any way to accelerate PPPoE encapsulation using hardware?
by mafiosa
Tue Dec 28, 2021 8:44 pm
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Re: Very high CPU usage on PCC Loadbalancing with 7.x

This post is getting confusing. It's because these are two separate issues. One is the impact of connection tracking being activated by the addition of the load balancing rules (something you normally do not notice if the default stateful firewall is in place, which is not the case here), and this ...
by mafiosa
Sun Dec 26, 2021 9:54 am
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Re: Very high CPU usage on PCC Loadbalancing with 7.x

Yes!!! it is lot less like with 140mbps it is 20-30% max. That sounds as if disabling the mangle rules was disabling something else (connection tracking?) as well, so post your complete configuration ( hide-sensitive is not necessary any more in ROS 7, the rest of my automatic signature remains val...
by mafiosa
Sat Dec 25, 2021 1:19 pm
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Re: Very high CPU usage on PCC Loadbalancing with 7.x

Second, unless something has dramatically changed about the essence of fasttracking in ROS 7, packets belonging to fasttracked connections bypass mangle rules (and other processing steps not relevant here). So to have fasttracking and load distribution work together, you have to allow only connecti...
by mafiosa
Sat Dec 25, 2021 1:18 pm
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Re: Very high CPU usage on PCC Loadbalancing with 7.x

Are you saying that if you disable the load distribution rules completely, the CPU load becomes lower by an order of magnitude?
Yes!!! it is lot less like with 140mbps it is 20-30% max.
by mafiosa
Wed Dec 22, 2021 6:43 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223451

Re: v7.1.1 is released!

Please help me with high CPU usage with PCC Loadbalancing on RB3011 v7.1.1 viewtopic.php?t=181516
by mafiosa
Wed Dec 22, 2021 6:16 pm
Forum: RouterOS beta
Topic: Very high CPU usage on PCC Loadbalancing with 7.x
Replies: 22
Views: 11272

Very high CPU usage on PCC Loadbalancing with 7.x

I am using RB3011 with two ISPs 140mbps + 105mbps. Router was running 7.1 stable and now 7.1.1 stable. However, with just 245mbps of load balancing the CPU usage increases to 75-85%. Earlier in v6 it was 35-45% maximum. Kindly check my PCC configuration and point out if any of my mangle rules are cr...
by mafiosa
Sun Dec 12, 2021 8:21 pm
Forum: RouterOS beta
Topic: v6 script not working properly
Replies: 2
Views: 1913

Re: v6 script not working properly

You should describe your issue first...
This script fails to add networks learnt from ospf to the address list specified
by mafiosa
Tue Dec 07, 2021 7:04 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 223007

Re: v7.1 is released!

VXLAN cannot be configured with unicast addresses but multicast routing is poorly documented and does not seem to work, etc. etc. etc. Most people would not consider software with so many bugs "stable." VXLAN with unicast works its not documented properly nor does Mikrotik team bother to ...
by mafiosa
Mon Dec 06, 2021 8:06 pm
Forum: RouterOS beta
Topic: v6 script not working properly
Replies: 2
Views: 1913

v6 script not working properly

:do { :foreach i in=[/ip route find ospf] do={ :local network [/ip route get $i dst-address]; /ip firewall address-list remove [/ip firewall address-list find where timeout=00:00:00]; /ip fire addr add list=OSPF address=$network timeout=00:01:00; } :delay 60s; } while=(true) How can I get this scrip...
by mafiosa
Mon Dec 06, 2021 5:48 pm
Forum: RouterOS beta
Topic: Torch for IPv6 not working in v7.1
Replies: 4
Views: 4669

Torch for IPv6 not working in v7.1

I cannot find ipv6 torch working on my pppoe interface. Cannot see ipv6 traffic on any interface.
by mafiosa
Thu Dec 02, 2021 3:33 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 223007

Re: v7.1 [testing] is released!

Do I need to mention outpu.network in bgp if I use out filter?
by mafiosa
Sun Nov 28, 2021 9:04 pm
Forum: RouterOS beta
Topic: v7.1rc7 [development] is released!
Replies: 174
Views: 54545

Re: v7.1rc7 [development] is released!

What configuration examples you would require? Documentation then can be updated with required examples if that helps, but syntax is not a rocket science that you have to learn for months, its literally one if with operators and action. I am announcing a network using output.filter but it stops ann...
by mafiosa
Sun Nov 28, 2021 1:11 pm
Forum: RouterOS beta
Topic: v7.1rc7 [development] is released!
Replies: 174
Views: 54545

Re: v7.1rc7 [development] is released!

I agree. Even bgp filters is not properly implemented. No proper guide. Use of Output.network is not clear. Could you be more specific what exactly is not properly implemented and what is not clear from routing filter manual? https://help.mikrotik.com/docs/pages/viewpage.action?pageId=74678285 I am...
by mafiosa
Sat Nov 27, 2021 12:27 pm
Forum: RouterOS beta
Topic: v7.1rc7 [development] is released!
Replies: 174
Views: 54545

Re: v7.1rc7 [development] is released!

Here are what I do see under bgp There is a lot of work to be done on BGP! The possibilities to debug and track it are really lacking. The "prefix count" in connections is always zero, there is no field tracking the uptime or last disconnect of a connection, and when a connection is inter...
by mafiosa
Fri Nov 26, 2021 11:17 am
Forum: RouterOS beta
Topic: v7.1rc7 [development] is released!
Replies: 174
Views: 54545

Re: v7.1rc7 [development] is released!

Is container package available?
by mafiosa
Thu Nov 11, 2021 4:46 pm
Forum: RouterOS beta
Topic: VxLAN in CHR cannot set MTU
Replies: 1
Views: 1339

VxLAN in CHR cannot set MTU

I am getting error cannot set MTU in CHR installation on Vultr / Proxmox. Please help.
by mafiosa
Tue Nov 09, 2021 4:34 pm
Forum: RouterOS beta
Topic: ROSv7 equivalent of /routing/bgp/advertisements print
Replies: 49
Views: 24838

Re: ROSv7 equivalent of /routing/bgp/advertisements print

NO. I had asked them they said nothing like that is available yet.
by mafiosa
Wed Oct 06, 2021 9:02 am
Forum: RouterOS beta
Topic: Feature Request: GREtap
Replies: 18
Views: 9382

Re: Feature Request: GREtap

It was never acknowledged by MikroTik as a feature worth implementing.
You will have to use EoIP instead.
EoIP doesn't work with SNAT behind IPACCT based NAS systems used my many ISPs. That is the main issue.
by mafiosa
Tue Sep 21, 2021 6:57 pm
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 81542

Re: v7.1rc4 [development] is released!

My router comes back unconfigured after upgrading from version 7.1rc3 to 7.1rc4. When trying to restore a backup of version 7.1rc3 or any version 6.x over 7.1rc4 software the hardware restarts, after boot the router remains unconfigured. It was necessary to reconfigure the router. I hope to have al...
by mafiosa
Mon Sep 20, 2021 9:36 pm
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 81542

Re: v7.1rc4 [development] is released!

After upgrade my bgp broke. Now my routes are not being announced to peers.
I had the same problem. What seems to have fixed it for me was disabling all BGP address-lists and re-enabling them.
Thanks for the tip it worked.
by mafiosa
Mon Sep 20, 2021 9:02 pm
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 81542

Re: v7.1rc4 [development] is released!

After upgrade my bgp broke. Now my routes are not being announced to peers.
by mafiosa
Mon Sep 20, 2021 3:02 pm
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 81542

Re: v7.1rc4 [development] is released!

Any specific improvements to MPLS or BGP?
by mafiosa
Wed Sep 15, 2021 8:17 pm
Forum: RouterOS beta
Topic: fastpath support on x86 or CHR
Replies: 3
Views: 3389

fastpath support on x86 or CHR

Do we have fastpath support on x86 or CHR on v7.1 RC3?
by mafiosa
Mon Sep 13, 2021 4:34 pm
Forum: RouterOS beta
Topic: high cpu usage while using BGP filters.
Replies: 3
Views: 1470

Re: high cpu usage while using BGP filters.

Still no word from support, provided them multiple supout.rif files and configuration. Yet no reply from them. Atleast acknowledge the problem if it cannot be resolved.
SUP-59730
by mafiosa
Sat Sep 11, 2021 5:17 pm
Forum: RouterOS beta
Topic: Feature Request : IPv6 Fasttrack
Replies: 176
Views: 50583

Re: Feature Request : IPv6 Fasttrack

This is 2021 final quarter. Please implement a proper IPv6 stack. It is till way behind other vendors. Recursive routing is still not implemented. Time for mikrotik to pull up the socks. Docker and stuff can still wait, core functionalities of a router must be the priority.
by mafiosa
Fri Sep 10, 2021 3:41 pm
Forum: Announcements
Topic: Mēris botnet information
Replies: 75
Views: 228397

Re: Mēris botnet information

Is socks present in v7.1 RC3?
by mafiosa
Wed Sep 08, 2021 3:46 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 160172

Re: v7.1rc3 adds Docker (TM) compatible container support

An example of how to use container package to run PiHole in RouterOS can be found here
Please add an example to run mDNS using container.
by mafiosa
Wed Sep 08, 2021 3:22 pm
Forum: RouterOS beta
Topic: v7.1rc3 [development] is released!
Replies: 172
Views: 49138

Re: v7.1rc3 [development] is released!

I just got 7.1 rc3 test images a couple of hours ago. Are they different from this?
yes, this is a fresh build, upgrade please
After upgrade got build time September 8 10:29:39 is it the latest one?
by mafiosa
Wed Sep 08, 2021 2:43 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

Re: mDNS repeater feature

In v7.1 RC3 docker support is added so anyone who has/ will try implementing mDNS via container?
by mafiosa
Wed Sep 08, 2021 2:40 pm
Forum: RouterOS beta
Topic: v7.1rc3 [development] is released!
Replies: 172
Views: 49138

Re: v7.1rc3 [development] is released!

mDNS proxy...
asterisk PBX...
What about you posting a quick guide on mDNS? Would be quiet helpful.
by mafiosa
Wed Sep 08, 2021 2:33 pm
Forum: RouterOS beta
Topic: v7.1rc3 [development] is released!
Replies: 172
Views: 49138

Re: v7.1rc3 [development] is released!

I just got 7.1 rc3 test images a couple of hours ago. Are they different from this?
by mafiosa
Tue Sep 07, 2021 9:14 pm
Forum: RouterOS beta
Topic: Unable to access zeortier network
Replies: 5
Views: 2127

Re: Unable to access zeortier network

Sorry to ask, but you did try pingv6 for either side of the zt-tunnel?
Yes still the same. No ping reply.
by mafiosa
Tue Sep 07, 2021 9:13 pm
Forum: RouterOS beta
Topic: Unable to access zeortier network
Replies: 5
Views: 2127

Re: Unable to access zeortier network

Can you provide the output from /ip route print detail and /zerotier print detail? /zerotier/interfaces/print Flags: D - dynamic, X - disabled; R - running 0 R name="OpenSwitch-IX" mac-address=AA:FE:E3:BD:DF:7D arp-timeout=auto network="8bd5124fd675b6aa" instance=zt1 allow-globa...
by mafiosa
Tue Sep 07, 2021 6:44 pm
Forum: RouterOS beta
Topic: high cpu usage while using BGP filters.
Replies: 3
Views: 1470

Re: high cpu usage while using BGP filters.

Where you get the 7.1rc3?
Actually is like do not exist...
From support. Same issue exists on rc2 also.
by mafiosa
Tue Sep 07, 2021 6:27 pm
Forum: RouterOS beta
Topic: high cpu usage while using BGP filters.
Replies: 3
Views: 1470

high cpu usage while using BGP filters.

I am running two BGP sessions on my Rb3011 with v7.1 RC3. However I see that memory usage is 10 times more than on v6.48.3 and cpu usage is 20-30% more than before. Earlier it would be just 10% with occasional spikes to 25% max but now it is 56%+ all time. I am attaching a supout.rif file and config...
by mafiosa
Mon Sep 06, 2021 2:49 pm
Forum: RouterOS beta
Topic: Unable to access zeortier network
Replies: 5
Views: 2127

Re: Unable to access zeortier network

anyone has any clue?
by mafiosa
Sat Sep 04, 2021 4:53 pm
Forum: RouterOS beta
Topic: Unable to access zeortier network
Replies: 5
Views: 2127

Unable to access zeortier network

Cannot access or ping zerotier network. Zerotier network is IPv6 only. Also got it approved on the ZT panel. IPv6 address is sent by zt. Also allowed global=yes is set. Lastly, no firewall rule is configured apart from fasttrack rules.
by mafiosa
Fri Sep 03, 2021 9:16 am
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 308315

Re: ZeroTier added to RouterOS v7.1rc2

Teleport, start with Zerotier tutorial on their webpage. Did you get a connection to their network, and then went and approved this Windows PC in the zerotier portal? You have to approve every device there. I am wanting to join a zt network that has IPv6 only. Is that an issue? I have set allowed g...
by mafiosa
Wed Sep 01, 2021 7:43 am
Forum: RouterOS beta
Topic: v7.1rc1 multicast / igmp-proxy
Replies: 12
Views: 6679

Re: v7.1rc1 multicast / igmp-proxy

Implemented in RC2.
by mafiosa
Wed Sep 01, 2021 7:25 am
Forum: RouterOS beta
Topic: SDWAN using Zerotier [SOLVED]
Replies: 54
Views: 25977

Re: SDWAN using Zerotier [ added to v7.1 RC2]

This feature is added to v7.1 RC2 onwards.
by mafiosa
Wed Sep 01, 2021 7:25 am
Forum: RouterOS beta
Topic: SDWAN using Zerotier [SOLVED]
Replies: 54
Views: 25977

Re: SDWAN using Zerotier

This feature is added to v7.1 RC2 onwards.
by mafiosa
Wed Sep 01, 2021 7:21 am
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 308315

Re: ZeroTier added to RouterOS v7rc2

Finally after crying for so long !!!
by mafiosa
Mon Aug 30, 2021 11:56 am
Forum: RouterOS beta
Topic: EIGRP
Replies: 3
Views: 2428

Re: EIGRP

Mikrotik simply will not implement it. No use explaining it's benefits. They even don't have IS-IS.
by mafiosa
Thu Aug 26, 2021 2:30 pm
Forum: General
Topic: EOIP not working behind SNAT on IPACCT NAS
Replies: 4
Views: 864

Re: EOIP not working behind SNAT on IPACCT NAS

It's funny that you say that the fact that EoIP doesn't work is a limiting factor for use of Mikrotik, given that EoIP is Mikrotik's proprietary protocol (which does not mean that other routers don't support other types of tunnels capable to transport L2 frames). Actually mikrotik doesn't support V...
by mafiosa
Thu Aug 26, 2021 1:30 pm
Forum: General
Topic: EOIP not working behind SNAT on IPACCT NAS
Replies: 4
Views: 864

EOIP not working behind SNAT on IPACCT NAS

Hello! My ISP provides static public IP via SNAT on their NAS. GRE and all other services work seemlessly. However, I cannot get EoIP tunnels working. Can someone elaborate what protocol/port is EoIP based on. It is proving to be a limiting factor for mikortik devices in our network. They use IPACCT...
by mafiosa
Tue Aug 24, 2021 1:56 pm
Forum: RouterOS beta
Topic: v7.1rc1 [development] is released!
Replies: 344
Views: 75881

Re: v7.1rc1 [development] is released!

RouterOS version 7.1rc1 has been released in public "development" channel!
Kindly update https://help.mikrotik.com/docs/display/ ... col+Status
by mafiosa
Tue Aug 24, 2021 1:40 pm
Forum: RouterOS beta
Topic: VxLAN unicast
Replies: 2
Views: 2510

VxLAN unicast

Hello, does VxLAN in v7.1rc support unicast? Can I build VxLAN tunnels without specifying unicast like we can do in VyOS. Like this: /bin/ip link add 4IXP type vxlan local 115.187.xx.xxx remote 195.48.40.110 dstport 4789 id 48 ttl 255 /bin/ip link set dev 4IXP up /bin/ip addr add 185.1.125.232/24 de...
by mafiosa
Mon Aug 23, 2021 9:47 pm
Forum: RouterOS beta
Topic: v7.1rc1 [development] is released!
Replies: 344
Views: 75881

Re: v7.1rc1 [development] is released!

GRE tunnel keepalive is now working between 7.1rc routers.
by mafiosa
Sun Aug 15, 2021 9:10 pm
Forum: RouterOS beta
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 241145

Re: v7.1beta6 [development] is released!

Is next beta/RC being released on 23rd August?
by mafiosa
Thu Jul 15, 2021 8:59 pm
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

Thanks to MikroTik for honest summary.
Looks like few users enjoy 7.1b7, any reason why it is not official?
Because they have asked to test filters specifically.
by mafiosa
Wed Jul 14, 2021 5:43 pm
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

beta 7 offers far more stability.
Do you have beta7?
yes
by mafiosa
Wed Jul 14, 2021 11:54 am
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

beta 7 offers far more stability. I guess it is worth the wait.
by mafiosa
Thu Jul 08, 2021 10:39 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

Re: mDNS repeater feature

To those people asking for mDNS, can you give examples where it will be useful? Rextended provided solutions for the given examples. Maybe there are more examples? I have two VLANs one for LAN and one for WLAN. I want to cast my screen from the desktop in the LAN to my smart tv in WLAN. I use mikro...
by mafiosa
Wed Jul 07, 2021 5:50 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

Re: mDNS repeater feature

Hege muchechilen sokale? na orom bhabhei chole esheychen dalali korte?
by mafiosa
Wed Jul 07, 2021 5:29 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

Re: mDNS repeater feature

Ever home user needs mDNS. I'm a home user, and I do not neet that. Why you assumption is so absolute? Is absolute false. My 4000 contracts (home and business), corresponding to more than 16000 person do not have that, no one single complain about that. Please explain what critical part of home net...
by mafiosa
Wed Jul 07, 2021 5:18 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

Re: mDNS repeater feature

even the edgerouter has a mdns repeater..
Ever home user needs mDNS. Don't know why mikrotik keeps ignoring this.
by mafiosa
Sat Jul 03, 2021 10:57 pm
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

This was the kind of statement required. Thanks a lot for the clarification.
by mafiosa
Thu Jul 01, 2021 3:30 pm
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

If we know something is not working, it is written in the changelog as a warning. We don't intentionally break anyone's devices by hiding stuff like that You got me wrong. I guess you guys tested filter before releasing 7.1beta 5 no where it was mentioned that filters are not working. After opening...
by mafiosa
Tue Jun 29, 2021 9:37 pm
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

The big issue with mikrotik is that they know that they break many features in each release. I they simply mention what's notworking and known to them it would be of great help.
by mafiosa
Tue Jun 22, 2021 10:30 pm
Forum: RouterBOARD hardware
Topic: RB3011 keeps rebooting when ethernet 1 is connected to gigabit capable device
Replies: 8
Views: 3329

Re: RB3011 keeps rebooting when ethernet 1 is connected to gigabit capable device

I can use one 3011 for test, but you never write routeros and routerboot version installed on routerboard,
on (my) 6.47.10 do not do any problem
I am on latest stable release. Doesn't matter which version I am in.
by mafiosa
Tue Jun 22, 2021 10:01 am
Forum: RouterBOARD hardware
Topic: RB3011 keeps rebooting when ethernet 1 is connected to gigabit capable device
Replies: 8
Views: 3329

Re: RB3011 keeps rebooting when ethernet 1 is connected to gigabit capable device

Hello. Which device exactly you are referreing as "A gigabit capable device"? I can remeber similar issue with unintentionally activated POE on the switch and RB2011. Ethernet 1 is poe -in port. AI have connected it to a non poe tplink switch, gigabit pc lan, huawei router. Same issues wi...
by mafiosa
Fri Jun 04, 2021 3:56 pm
Forum: Forwarding Protocols
Topic: BGP communities for 32 bit ASN
Replies: 2
Views: 2766

Re: BGP communities for 32 bit ASN

It is a limitation of BGP. Extended communities and large communities support 32bit ASNs. Large communities is a new feature which is added only in ROS v7
As v7.1 b6 is of alpha quality I cannot put it in my home network. Anyways using 16 bit private AS
by mafiosa
Fri Jun 04, 2021 11:10 am
Forum: Forwarding Protocols
Topic: BGP communities for 32 bit ASN
Replies: 2
Views: 2766

BGP communities for 32 bit ASN

I am unable to use 32bit ASN bgp communities. Is it a limitation of RouterOS? How do I overcome it with any workaround? Can't use v7.1 beta 6
by mafiosa
Tue May 25, 2021 7:02 pm
Forum: RouterOS beta
Topic: Feature Request : IPv6 Fasttrack
Replies: 176
Views: 50583

Re: Feature Request : IPv6 Fasttrack

+1 mikrotik's ipv6 implementation is lagging way behind that of other vendors.
by mafiosa
Sat May 22, 2021 7:54 pm
Forum: RouterOS beta
Topic: RB3011 memory leak and random crash
Replies: 5
Views: 1863

Re: RB3011 memory leak and random crash

Would really like to see some relevant information:
  • RouterOS version
  • Firmware version
  • Configuration (/export hide-sensitive file=nynameyoulike)
Latest Beta v7.1 b6. Latest firmware. Full reset post upgradation.
by mafiosa
Sat May 22, 2021 5:11 pm
Forum: RouterOS beta
Topic: RB3011 memory leak and random crash
Replies: 5
Views: 1863

Re: RB3011 memory leak and random crash

It is posted to see if others are facing the same issue or not. I have included details about when the memory leak is triggered.
by mafiosa
Sat May 22, 2021 1:10 pm
Forum: RouterOS beta
Topic: RB3011 memory leak and random crash
Replies: 5
Views: 1863

RB3011 memory leak and random crash

RB3011 crashed thrice in the last 12 hours. Once while adding new DHCP server, next while executing routing/route/ print where filtered and once randomly. In the first two cases, it triggered a memory leak and ate up the entire ram.
Submitted support ticket with support.rif
by mafiosa
Sat May 22, 2021 1:08 pm
Forum: RouterOS beta
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 241145

Re: v7.1beta6 [development] is released!

RB3011 crashed thrice in the last 12 hours. Once while adding new DHCP server, next while executing routing/route/ print where filtered and once randomly. In the first two cases, it triggered a memory leak and ate up the entire ram.
by mafiosa
Fri May 21, 2021 11:15 pm
Forum: RouterOS beta
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 241145

Re: v7.1beta6 [development] is released!

Hello can anyone from mikrotik confirm if route filters and ospfv3 is working or not? Route filters are working Route filters aren't working. See detailed post: https://forum.mikrotik.com/viewtopic.php?f=1&t=175428 Also check ticket# SUP-50226 Got the working partially with the help of Mrz via ...
by mafiosa
Fri May 21, 2021 11:14 pm
Forum: RouterOS beta
Topic: Route filter for BGP not working v7.1 beta 6
Replies: 3
Views: 3217

Re: Route filter for BGP not working v7.1 beta 6

Problem is not with actual filters. To redistribute static routes now you need to enable redistribution in connection settings. And set up routing filter selection chain and set it as output.filter Now I see routes being advertised but is there anyway to see which ones are being advertised from mik...
by mafiosa
Fri May 21, 2021 8:18 pm
Forum: RouterOS beta
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 241145

Re: v7.1beta6 [development] is released!

Hello can anyone from mikrotik confirm if route filters and ospfv3 is working or not?
Route filters are working
Route filters aren't working. See detailed post: viewtopic.php?f=1&t=175428 Also check ticket# SUP-50226
by mafiosa
Fri May 21, 2021 8:00 pm
Forum: RouterOS beta
Topic: Route filter for BGP not working v7.1 beta 6
Replies: 3
Views: 3217

Route filter for BGP not working v7.1 beta 6

Route filter for BGP not working in v7.1 beta 6 [kalpak@MikroTik] /routing/filter/rule> print Flags: X - disabled, I - inactive 0 chain=secureshit-out rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:8f02:2110::/44]) then={ action accept } 1 chain=secureshit-out rule= if ([protocol static ...
by mafiosa
Thu May 20, 2021 4:45 pm
Forum: RouterOS beta
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 241145

Re: v7.1beta6 [development] is released!

Hello can anyone from mikrotik confirm if route filters and ospfv3 is working or not?
by mafiosa
Wed May 19, 2021 9:17 pm
Forum: RouterOS beta
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 241145

Re: v7.1beta6 [development] is released!

is ospf and ospfv3 working?
by mafiosa
Sat May 15, 2021 1:22 pm
Forum: RouterOS beta
Topic: v7 launch date
Replies: 156
Views: 48582

Re: v7 launch date

They should take one routing protocol at a time. Ospfv3 works in a particular release and gets broken in the next. Multiple revision in route filters got it not working since last two betas.
by mafiosa
Wed Apr 28, 2021 9:53 am
Forum: RouterOS beta
Topic: v7.1beta5 [development] is released!
Replies: 292
Views: 84762

Re: v7.1beta5 [development] is released!

waiting for a beta with functional route filtering. I can then test it extensively.
by mafiosa
Sun Apr 18, 2021 4:03 pm
Forum: Forwarding Protocols
Topic: OSPFv3 not working with Huawei AR1220
Replies: 0
Views: 1943

OSPFv3 not working with Huawei AR1220

Hello I cannot get mikrotik 6.48.2 rb3011 to work with huawei AR1220. The neighbor adjacency simply doesn't come up. I have set network type to broadcast and also tried changing instance id from 0 to 1 still doesn't work.
by mafiosa
Sun Apr 18, 2021 1:41 pm
Forum: Announcements
Topic: v6.48.2 [stable] is released!
Replies: 141
Views: 61312

Re: v6.48.2 [stable] is released!

Facing issues with ospf. It keeps flapping.
by mafiosa
Sun Apr 18, 2021 12:02 pm
Forum: RouterOS beta
Topic: v7.1beta5 [development] is released!
Replies: 292
Views: 84762

Re: v7.1beta5 [development] is released!

I believe they do have L3 enabled, it is currently in that state where it seems to fall back to CPU. Columns: NAME, SWITCH, L3-HW-OFFLOADING, STORM-RATE # NAME SWITCH L3- STO 0 1-xxxxx switch1 yes 100 1 2-xxxxx switch1 yes 100 2 3-xxxxx switch1 yes 100 3 sfp-sfpplus4 switch1 yes 100 4 sfp-sfpplus5 ...
by mafiosa
Mon Apr 12, 2021 12:02 am
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 98201

mDNS repeater feature

Please bring mDNS repeater feature in Rosv7. It is a very important feature for home routers.
by mafiosa
Fri Mar 26, 2021 6:31 am
Forum: RouterOS beta
Topic: OSPF Cost
Replies: 4
Views: 2696

Re: OSPF Cost

As confirmed by Mikrotik support setting cost is not available in beta 5 and will be added in next betas. Check the original post.
by mafiosa
Wed Mar 24, 2021 11:40 am
Forum: RouterOS beta
Topic: BGP route filters not working in beta 5
Replies: 2
Views: 2001

BGP route filters not working in beta 5

I have the following networks: 2a0e:b107:xx0::/46 2a0e:b107:xx4::/46 2a0e:b107:xx8::/46 2a0e:b107:xxc::/46 I have added these as blackhole using ipv6 route add dst=2a0e:b107:xx0::/46 blackhole. I have also created an address list with the following networks called bgp-network For route filter as of ...
by mafiosa
Tue Mar 23, 2021 5:48 pm
Forum: RouterOS beta
Topic: v7.1beta5 [development] is released!
Replies: 292
Views: 84762

Re: v7.1beta5 [development] is released!

OSPFv3 is still broken in beta5 - getting "wrong checksum" from everything, same as in beta4. Yes as soon as I add interface for ospfv3 the other routers stop receiving routes (6..48.1). The router keeps receiving ipv4 routes from other routers but ospfv2 stops sending out routes but not ...
by mafiosa
Tue Mar 23, 2021 5:01 pm
Forum: RouterOS beta
Topic: IPv6 bgp network
Replies: 5
Views: 1825

Re: IPv6 bgp network

From reading the v7 documentation, it seems like this will require a route to exist at the exact prefix length of the network you are trying to advertise. Is it still possible to announce an aggregate? Did you get ospfv3 working? As soon I add ospfv3 interface the ospfv2 loses the neighbors. I have...
by mafiosa
Tue Mar 23, 2021 2:10 pm
Forum: RouterOS beta
Topic: IPv6 bgp network
Replies: 5
Views: 1825

Re: IPv6 bgp network

To advertise prefixes from specified address list. Replaces "/routing bgp network" configuration of ROS v6
So I create an ipv6 address list and put the name of the address list there or explicitly mention the networks?
by mafiosa
Tue Mar 23, 2021 1:29 pm
Forum: RouterOS beta
Topic: IPv6 bgp network
Replies: 5
Views: 1825

IPv6 bgp network

What is the use of output.network variable in BGP in v7.1 beta 5?
by mafiosa
Wed Mar 17, 2021 9:37 pm
Forum: RouterOS beta
Topic: v7.1beta5 [development] is released!
Replies: 292
Views: 84762

Re: v7.1beta5 [development] is released!

Hello everyone, where are the promised BGP filters?
This is the only thing that stops me from moving to v7.
same here buddy, would request mikrotik to update the v7 routing protocol status page in help.mikrotik.com ASAP
by mafiosa
Mon Mar 15, 2021 5:47 pm
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 55939

Re: v7.1beta4 [development] is released!

When can we expect Stable Release of ROS v7?????
2022 end I guess. Since 2019 it's been in beta.
by mafiosa
Tue Mar 09, 2021 11:06 am
Forum: RouterOS beta
Topic: Segment Routing and IS-IS
Replies: 22
Views: 10750

Re: Segment Routing and IS-IS

+1 for IS-IS
by mafiosa
Sun Mar 07, 2021 2:14 pm
Forum: RouterOS beta
Topic: Feature Request: IS-IS
Replies: 7
Views: 5454

Re: Feature Request: IS-IS

I don't know what's wrong with mikrotik their ospf doesn't work well with huawei or VyOS at times.
by mafiosa
Wed Feb 10, 2021 12:44 pm
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 55939

Re: v7.1beta4 [development] is released!

So... Where can i set rpki filter ROAs validation??? I can't find "match-rpki" filter option i could use on v7.1beta3 RouterOS Version [admin@MikroTik] > routing/filter/rule/ .. -- go up to filter add -- Create a new item disable -- Disable items edit -- enable -- Enable items export -- P...
by mafiosa
Fri Feb 05, 2021 12:49 pm
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 55939

Re: v7.1beta4 [development] is released!

Yes exactly the reason why I stopped testing it yesterday.
Just received reply from support that filters are being reworked and do not work as of now. Will never test betas again unless they don't mention what's know to be not working.
by mafiosa
Fri Feb 05, 2021 11:54 am
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 55939

Re: v7.1beta4 [development] is released!

I still can't get routing filters to work, so that OSPF would pick up the default route. I tried the same under beta3, but there OSPF didn't seem to consider the filters at all. Now with beta4, there is only: /routing/filter/rule add chain=ospf_out rule= . There is no match-prfx-value or similar, a...
by mafiosa
Thu Feb 04, 2021 7:58 pm
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 55939

Re: v7.1beta4 [development] is released!

Creating filters via winbox not working. Certain options in bgp crashes winbox. The AFI option in bgp templates in particular.
by mafiosa
Thu Feb 04, 2021 5:43 pm
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 55939

Re: v7.1beta4 [development] is released!

So we can now finally use winbox to configure BGP and OSPF?
by mafiosa
Wed Feb 03, 2021 7:48 pm
Forum: Virtualization
Topic: CHR on Proxmox optimization.
Replies: 1
Views: 5735

CHR on Proxmox optimization.

Hello! I own an rb3011, recently I got my ASN and started some serious homelab experiments. So I had seen high cpu usage on the routerboard. I am trying out CHR on proxmox. The hypervisor config is AMD Athlon 200G and 8GB of ram, a 1TB harddisk. Proxmox version is 6.3-3. CHR version is latest v6.46....
by mafiosa
Sat Jan 30, 2021 12:10 pm
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 295
Views: 126850

Re: v6.48 [stable] is released!

Is there a bug on 6.48 for these devices?
Likely, yes. Read the above messages. So downgrade to long-term version.
Mikrotik should act fast and release a 6.48.1 in stable channel. This is unacceptable to have such a buggy stable release.
by mafiosa
Thu Jan 21, 2021 11:55 am
Forum: RouterOS beta
Topic: v7.1beta3 [development] is released!
Replies: 261
Views: 78630

Re: v7.1beta3 [development] is released!

See here how to use routing filters:
https://help.mikrotik.com/docs/display/ ... ingFilters
When can we expect the next release of v7.1?
by mafiosa
Fri Jan 15, 2021 2:11 pm
Forum: RouterOS beta
Topic: PCC load balancing in ROSv7
Replies: 0
Views: 1241

PCC load balancing in ROSv7

Does pcc loadbalance work in router osv7?
by mafiosa
Fri Jan 15, 2021 2:10 pm
Forum: RouterOS beta
Topic: PCC load balancing in ROSv7
Replies: 0
Views: 1060

PCC load balancing in ROSv7

Does pcc loadbalance work in router osv7?
by mafiosa
Fri Jan 15, 2021 12:42 pm
Forum: RouterOS beta
Topic: Segment Routing and IS-IS
Replies: 22
Views: 10750

Re: Segment Routing and IS-IS

+1 for IS-IS and segment routing.
by mafiosa
Mon Jan 11, 2021 2:01 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

Re: dual wan PCC loadbalancing with GRE tunnel.

Hello if you don't mind can you modify the script so that it adds connected routes also to the address list. I think that will solve my issue. I mean both ospf and connected routes will be added to a single address list. Maybe you should exclude your LAN networks with another static list and prerou...
by mafiosa
Sun Jan 10, 2021 10:09 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

Re: dual wan PCC loadbalancing with GRE tunnel.

UPDATE: I have finally been able to manage it. Now I can use PCC load balancing while accessing the gre tunnel networks. Now waiting for Mikrotik to FIX port flapping issue on my RB3011 with 6.48 release. I added two mangle rule: 1 to mark new connections with destination address list ospf as vpn_co...
by mafiosa
Sun Jan 10, 2021 8:19 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

Re: dual wan PCC loadbalancing with GRE tunnel.

to automate that address list you can use something like :do { :foreach i in=[/ip route find ospf] do={ :local network [/ip route get $i dst-address]; /ip firewall address-list remove [/ip firewall address-list find where timeout=00:00:00]; /ip fire addr add list=OSPF address=$network timeout=00:01...
by mafiosa
Sat Jan 09, 2021 8:12 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

Re: dual wan PCC loadbalancing with GRE tunnel.

Since no embedded match condition like dst-address-type=accessible-through-dynamic-route is available, you have to use the address-list named ospf-destinations and populate it on your own, according to the actual address plan of your network. Maybe it is enough that it consists of all three RFC1918 ...
by mafiosa
Sat Jan 09, 2021 5:09 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

Re: dual wan PCC loadbalancing with GRE tunnel.

It seems you didn't get what @mbaute wanted to say, so I'll try to re-word it. The routes learned through OSPF are added to routing table called main , which is used to route packets without any routing-mark assigned. Those rules @mbaute has shown were your own rules from the export, and the sugges...
by mafiosa
Sat Jan 09, 2021 12:21 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

Re: dual wan PCC loadbalancing with GRE tunnel.

hi, add action=mark-connection chain=prerouting dst-address-type=!local \ new-connection-mark=abspl_conn passthrough=yes per-connection-classifier=\ src-address-and-port:2/0 add action=mark-connection chain=prerouting dst-address-type=!local \ new-connection-mark=sswl_conn passthrough=yes per-conne...
by mafiosa
Fri Jan 08, 2021 9:14 pm
Forum: General
Topic: dual wan PCC loadbalancing with GRE tunnel.
Replies: 12
Views: 2964

dual wan PCC loadbalancing with GRE tunnel.

Here is my configuration. I am learning routes from gre/ipsec tunnels via OSPF but cannot reach them. Please help me out. I have PCC with port forwarding configured. # jan/09/2021 00:40:36 by RouterOS 6.46.8 # software id = 7HJJ-N0I9 # # model = RouterBOARD 3011UiAS # serial number = 783D066965C5 /c...
by mafiosa
Wed Jan 06, 2021 12:07 pm
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 295
Views: 126850

Re: v6.48 [stable] is released!

fix port flapping please for 3011 ASAP
by mafiosa
Sat Jan 02, 2021 8:01 pm
Forum: General
Topic: Gre over ipsec
Replies: 10
Views: 2494

Re: Gre over ipsec

@mafiosa make your life easily, play specially with ipsec with same vendors devices. I had unestablished tunnels with mikrotik on different version. When i upgraded to later version bum everything works well. i found dynamic routhing protocol are much more easy (i'm avoiding as much as possible) fo...
by mafiosa
Sat Jan 02, 2021 11:06 am
Forum: General
Topic: Gre over ipsec
Replies: 10
Views: 2494

Re: Gre over ipsec

@mafiosa make your life easily, play specially with ipsec with same vendors devices. I had unestablished tunnels with mikrotik on different version. When i upgraded to later version bum everything works well. i found dynamic routhing protocol are much more easy (i'm avoiding as much as possible) fo...
by mafiosa
Fri Jan 01, 2021 3:50 pm
Forum: General
Topic: Gre over ipsec
Replies: 10
Views: 2494

Re: Gre over ipsec

I found out that with 3DES and SHA1 and 255 tunnel establishes and traffic moves through it. Having issue with other cipher combinations. tunnel between huawei and mikrotik.
by mafiosa
Fri Jan 01, 2021 11:02 am
Forum: General
Topic: Gre over ipsec
Replies: 10
Views: 2494

Re: Gre over ipsec

Definitely not IP-ENCAP as GRE is a different protocol. Setting GRE is sufficient if Huawei supports that too, otherwise 255. The Huawei ACL 3000 in your other topic as linked by @msatter doesn't specify any IP protocol, hence 255 (which is the default if you don't specify any protocol) at Mikrotik...
by mafiosa
Fri Jan 01, 2021 1:16 am
Forum: General
Topic: Gre over ipsec
Replies: 10
Views: 2494

Gre over ipsec

In case of gre over ipsec what ipsec policy should I create? Does it need to be a 255(all) or 4(ip-encap) or 47 gre? I am configuring it between huawei and mikrotik. Huawei guide suggests to set up for ipsec acl for gre over ipsec.
by mafiosa
Sun Dec 27, 2020 9:52 am
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 295
Views: 126850

Re: v6.48 [stable] is released!

After upgrading on RB3011 ports in switch group 1 (ether1-5) started flapping every 5 minutes. Rolled back on 6.47.8 and all seems ok. So 3011 users, install with care! ;) I have the same problem with eth1 and eth2 dropping every hour approximately on my RB3011, downgrading solved the problem as we...
by mafiosa
Thu Dec 24, 2020 9:16 pm
Forum: General
Topic: IPSec equivalent config for Mikrotik RouterOS
Replies: 1
Views: 1904

IPSec equivalent config for Mikrotik RouterOS

Here is the IPSec config on a huawei AR1200. Please translate this to RouterOS settings! # sysname RouterA # acl number 3000 //Configure an ACL. rule 0 permit ip source 1.2.1.1 0 destination 1.2.2.1 0 # ipsec proposal rtb //Configure an IPSec proposal. encapsulation-mode transport //Set the encapsul...
by mafiosa
Tue Dec 22, 2020 9:06 pm
Forum: General
Topic: Gre over IPSec between huawei and mikrotik
Replies: 0
Views: 718

Gre over IPSec between huawei and mikrotik

has anyone tried to setup gre over ipsec tunnel between huawei router and mikrotik? tunnel enters established state but current bytes count only increases in one installed SA out of the pair.
by mafiosa
Sat Dec 05, 2020 9:31 am
Forum: General
Topic: L2TP with IPSEC terminating connection exactly every 30 minutes
Replies: 7
Views: 1561

Re: L2TP with IPSEC terminating connection exactly every 30 minutes

Probably. Is there any option to generate some traffic in Mikrotik and send it through L2TP every 25 minutes? The user of the other Hap Ac² is saying that he didn't use the tunnel for 10 hours, because we only use it to authenticate one web page with the correct ip adress through mangle rules, but ...
by mafiosa
Fri Dec 04, 2020 6:37 pm
Forum: RouterOS beta
Topic: v7.1beta3 [development] is released!
Replies: 261
Views: 78630

Re: v7.1beta3 [development] is released!

Which features are missing in your opinion?
Unicast VxLAN tunnels would be of great use.
A better explanation of route filters.
Zerotier
by mafiosa
Wed Dec 02, 2020 10:44 pm
Forum: General
Topic: PCC dual wan load balancing + gre tunnels to branches.
Replies: 1
Views: 812

PCC dual wan load balancing + gre tunnels to branches.

Hello! Please help me configure PCC dual wan load balancing with port forwarding. Also I have 3 GRE/IPSec tunnels running OSPF and routes are learnt via ospf. I configured PCC with port forwarding. However, the subnets learnt via ospf over tunnels are inaccessible.
by mafiosa
Thu Nov 26, 2020 10:55 pm
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

I am rebooting my chateau let12 at least twice a day, because of known dhcp issues. i guess i need to schedule a reboot every 6h or so.
I had this issue with HAP AC^2 but on opening support ticket they provided me with rosv7.1 beta 3 and that resolved this dhcp issue.
by mafiosa
Tue Nov 24, 2020 8:42 pm
Forum: RouterOS beta
Topic: Feature Request: IS-IS
Replies: 7
Views: 5454

Feature Request: IS-IS

Is it possible to have is-is routing protocol in v7? I think that's good IGP for single domain large number of routes like around 100 nodes. Just saying!
by mafiosa
Sun Nov 15, 2020 6:11 pm
Forum: General
Topic: EOIP not working behind 1:1 nat
Replies: 4
Views: 1019

Re: EOIP not working behind 1:1 nat

EoIP is as simple to get working as it gets. I have created tunnels through NAT on a Mikrotik device, e.g. Mikrotik #1 -> [ NAT Mikrotik #2] -> Mikrotik #3. However, you need to be aware of MTU. Can you show your actual configuration? Tried with no nathi on one side and 1:1 nat in the other. Reduce...
by mafiosa
Fri Nov 06, 2020 11:17 am
Forum: RouterOS beta
Topic: HAP AC^2 wifi clients stuck obtaining IP address
Replies: 15
Views: 5534

Re: HAP AC^2 wifi clients stuck obtaining IP address

I have seen similar issues: - moving a working ROS6.46 and ROS6.47 config to ROS7 (tried on beta2 and 7.0.1). Most Wifi clients do work, all the wired networks do work (So I know that the system works as I have some clients working correctly on all Wired, Wireless, VLAN, bridge i/f etc.). but : - A...
by mafiosa
Fri Nov 06, 2020 9:06 am
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

3 months yet next beta is not yet released! waiting for next release that would mitigate the wifi dhcp lease issue on hap ac2
by mafiosa
Fri Oct 30, 2020 3:32 pm
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

It seems wi-fi issue has been fixed in 7.1beta3. Running it for a week without any issues.
PS: not yet available for everyone.
Beta 3? How did you get it?
by mafiosa
Wed Oct 28, 2020 11:51 am
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

anyone tried configuring BGP in ROS7.1beta2 I would love to see some examples :)
yes me too especially with filters. Also it's been 2 months since last beta release.
by mafiosa
Tue Oct 27, 2020 11:59 am
Forum: RouterOS beta
Topic: HAP AC^2 wifi clients stuck obtaining IP address
Replies: 15
Views: 5534

HAP AC^2 wifi clients stuck obtaining IP address

On Rosv7.1 b2 wifi clients on connecting to wifi are stuck at obtaining ip address. this issue is only solved on rebooting the router but it reoccurs everytime.
by mafiosa
Fri Oct 23, 2020 12:50 pm
Forum: RouterOS beta
Topic: Feature Request: GREtap
Replies: 18
Views: 9382

Re: Feature Request: GREtap

Anyone from mikrotik please have a look!
by mafiosa
Fri Oct 23, 2020 11:57 am
Forum: General
Topic: EOIP not working behind 1:1 nat
Replies: 4
Views: 1019

EOIP not working behind 1:1 nat

Hello my ISP provides me public ip via 1:1 NAT, gre and all vpns work fine but EOIP doesn't work. Can someone confirm me that EOIP works behind nat or not? Please, it is urgent as I have to remove mikrotik from my network if it doesn't
by mafiosa
Fri Oct 23, 2020 2:19 am
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

Can we expect the next beta version today as it is a Friday and over 2 months since the last beta release?
by mafiosa
Tue Oct 20, 2020 2:21 pm
Forum: General
Topic: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour
Replies: 58
Views: 35951

Re: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour

+1 for mDNS atleast in ROSv7 we should get it
by mafiosa
Fri Oct 16, 2020 5:34 pm
Forum: RouterBOARD hardware
Topic: RB3011 keeps rebooting when ethernet 1 is connected to gigabit capable device
Replies: 8
Views: 3329

RB3011 keeps rebooting when ethernet 1 is connected to gigabit capable device

Hello my rb3011 keeps rebooting (not complete reboot but all lights keep blinking including LCD panel) if I plug in a gigabit capable device to ether 1 and leave it on auto negotiation. If I manually set the ether1 port to gigabit then on plugging the cable to ether 1 router shuts down until it is p...
by mafiosa
Thu Oct 08, 2020 8:12 am
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

RouterOS version 7.1beta2 has been released in public "development" channel! Can also confirm a DHCP issues on hAP ac2: wireless clients time to time are unable to get IP address and reconnect in a loop. WLAN interface disabling/enabling temporary "fix" the problem. Also confirm...
by mafiosa
Thu Oct 01, 2020 11:08 pm
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

by mafiosa
Thu Oct 01, 2020 12:09 pm
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

Lets hope to see 7.1 b3 or porbably 7.1 rc tomorrow xD Don't expect rc in for long time, they first need to include all functionality and have that tested for some time. Probably won't see a rc version this year. I would be surprised to see a stable version 7 next year. it is already 13 months sinc...
by mafiosa
Thu Oct 01, 2020 11:15 am
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 152874

Re: v7.1beta2 [development] is released!

Lets hope to see 7.1 b3 or porbably 7.1 rc tomorrow xD
by mafiosa
Fri Sep 25, 2020 6:21 pm
Forum: General
Topic: SwitchOS on RB3011
Replies: 1
Views: 715

SwitchOS on RB3011

Is it possible to install switchOS on rb3011 because I found it written on RB3011 QSG that came in the box.
  • 1
  • 2